This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
`MCSymbolRefExpr` variant kind for TLSCALL is prefixed with
_ARM_ since this is how it was originally implemented.
The X86_64 version is exactly the same so there's no reason
to create a new variant, we can just rename the existing
one to be machine-independent.
This generalization is the first step to implement support
for GNU2 TLS dialect in MC.
Differential Revision: http://reviews.llvm.org/D18160
llvm-svn: 263515
Removing the assertion is safe to do because any module level inline
assembly is always emitted first via AsmPrinter::doInitialization().
http://reviews.llvm.org/D16101
rdar://22690666
llvm-svn: 263033
Until now curly braces could only be used in MS inline assembly to mark block start/end.
All curly braces were removed completely at a very early stage.
This approach caused bugs like:
"m{o}v eax, ebx" turned into "mov eax, ebx" without any error.
In addition, AVX-512 added special operands (e.g., k registers), which are also surrounded by curly braces that mark them as such.
Now, we need to keep the curly braces and identify at a later stage if they are marking block start/end (if so, ignore them), or surrounding special AVX-512 operands (if so, parse them as such).
This patch fixes the bug described above and enables the use of AVX-512 special operands.
This commit is the the llvm part of the patch.
The clang part of the review is: http://reviews.llvm.org/D17766
The llvm part of the review is: http://reviews.llvm.org/D17767
Differential Revision: http://reviews.llvm.org/D17767
llvm-svn: 262843
Summary: This is extracted from D17555
Reviewers: davidxl, reames, sanjoy, MatzeB, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17579
llvm-svn: 261796
This apparently comes up when the register allocator decides that a
variable will become undef along a certain path.
Also improve the error message we emit when we can't map from LLVM
register number to CV register number.
llvm-svn: 261016
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
llvm-svn: 260521
Summary:
Refactor common value, scope, and label tracking logic out of DwarfDebug
into a common base class called DebugHandlerBase.
Update an old LLVM IR test case to avoid an assertion in LexicalScopes.
Reviewers: dblaikie, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16931
llvm-svn: 260432
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
llvm-svn: 259868
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
If a target can only emit 8-bits data, we would loop in EmitValueImpl
since it will try to split a 32-bits data in 1 chunk of 32-bits.
No test since all current targets can emit 32bits at a time.
Patch by Alexandru Guduleasa!
llvm-svn: 259399
Changed emitting offset of macinfo entry into compiler unit DIE to use "addSectionLabel" method rather than explicitly calculating size/offset of macro entry.
Differential Revision: http://reviews.llvm.org/D16292
llvm-svn: 259358
With poorly chosen custom parameters, the line table encoding logic would
sometimes end up generating a special opcode bigger than 255, which is wrong.
The set of default parameters that LLVM uses isn't subject to this bug.
When carefully chosing the line table parameters, it's impossible to fall into the
corner case that this patch fixes. The standard however doesn't require that these
parameters be carefully chosen. And even if it did, we shouldn't generate broken
encoding.
Add a unittest for this specific encoding bug, and while at it, create some unit
tests for the encoding logic using different sets of parameters.
llvm-svn: 259334
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
llvm-svn: 259230
Summary:
There are three parts to inlined call frames:
1. The inlinee line subsection
2. The inline site symbol record
3. The function ids referenced by both
This change starts by emitting function ids (3) for all subprograms and
emitting the base inline site symbol record (2). The actual line numbers
in (2) use an encoded format that will come next, along with the inlinee
line subsection.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16333
llvm-svn: 259217
I don't seem to see these locally, maybe just need to update my
compiler, or we haven't turned them on for LLVM's build and we should...
llvm-svn: 259146
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
Various bits we want to use the new ABI actually compile with "-arch armv7k
-miphoneos-version-min=9.0". Not ideal, but also not ridiculous given how
slices work.
llvm-svn: 258975
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
llvm-svn: 258750
Consolidate the code which handles string table offsets less than 999999
with the code for offsets less than 9999999. While we are here,
simplify the code by not using sprintf to generate the string.
llvm-svn: 258664
When a symbol S shows up in an expression in assembly there are two
possible interpretations
* The expression is referring to the value of S in this file.
* The expression is referring to the value after symbol resolution.
In the first case the assembler can reason about the value and try to
produce a relocation.
In the second case, that is only possible if the symbol cannot be
preempted.
Assemblers are not very consistent about which interpretation gets used.
This changes MC to agree with GAS in the case of an expression of the
form "Sym - WeakSym".
llvm-svn: 258329
The value size was always 1 or 0, so we don't need to store it.
In a no asserts build this takes the testcase of pr26208 from 11 to 10
seconds.
llvm-svn: 258141
WebAssembly's stack will never be executable by default, so it isn't
necessary to declare .note.GNU-stack sections to request a non-executable
stack.
Differential Revision: http://reviews.llvm.org/D15969
llvm-svn: 257962
Davide Italiano