add <rd>, sp, #<imm8>
ldr <rd>, [sp, #<imm8>]
When the offset from sp is multiple of 4 and in range of 0-1020.
This saves code size by utilizing 16-bit instructions.
rdar://9321541
llvm-svn: 129971
This patch depends on the prior fix r129908 that changes to use std::find,
rather than std::binary_search, on unordered array.
Patch by Dan Bailey
llvm-svn: 129909
used by Clang. To help Clang integration, the PTX target has been split
into two targets: ptx32 and ptx64, depending on the desired pointer size.
- Add GCCBuiltin class to all intrinsics
- Split PTX target into ptx32 and ptx64
llvm-svn: 129851
manually and pass all (now) 4 arguments to the mul libcall. Add a new
ExpandLibCall for just this (copied gratuitously from type legalization).
Fixes rdar://9292577
llvm-svn: 129842
- As before, there is a minor semantic change here (evidenced by the test
change) for Darwin triples that have no version component. I debated changing
the default behavior of isOSVersionLT, but decided it made more sense for
triples to be explicit.
llvm-svn: 129805
- There is a minor semantic change here (evidenced by the test change) for
Darwin triples that have no version component. I debated changing the default
behavior of isOSVersionLT, but decided it made more sense for triples to be
explicit.
llvm-svn: 129802
Making use of VFP / NEON floating point multiply-accumulate / subtraction is
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Enable these fp vmlx codegen changes for Cortex-A9.
llvm-svn: 129775
Add a avoidWriteAfterWrite() target hook to identify register classes that
suffer from write-after-write hazards. For those register classes, try to avoid
writing the same register in two consecutive instructions.
This is currently disabled by default. We should not spill to avoid hazards!
The command line flag -avoid-waw-hazard can be used to enable waw avoidance.
llvm-svn: 129772
when they are a truncate from something else. This eliminates fully half of all the
fastisel rejections on a test c++ file I'm working with, which should make a substantial
improvement for -O0 compile of c++ code.
This fixed rdar://9297003 - fast isel bails out on all functions taking bools
llvm-svn: 129752
Before we would bail out on i1 arguments all together, now we just bail on
non-constant ones. Also, we used to emit extraneous code. e.g. test12 was:
movb $0, %al
movzbl %al, %edi
callq _test12
and test13 was:
movb $0, %al
xorl %edi, %edi
movb %al, 7(%rsp)
callq _test13f
Now we get:
movl $0, %edi
callq _test12
and:
movl $0, %edi
callq _test13f
llvm-svn: 129751
registers for fast allocation a different way. This has us updating
used registers only when we're using that exact register.
Fixes rdar://9207598
llvm-svn: 129711
value constraints on them (when defined as ImmLeaf's). This is particularly important
for X86-64, where almost all reg/imm instructions take a i64immSExt32 immediate operand,
which has a value constraint. Before this patch we ended up iseling the examples into
such amazing code as:
movabsq $7, %rax
imulq %rax, %rdi
movq %rdi, %rax
ret
now we produce:
imulq $7, %rdi, %rax
ret
This dramatically shrinks the generated code at -O0 on x86-64.
llvm-svn: 129691
2. implement rdar://9289501 - fast isel should fold trivial multiplies to shifts
3. teach tblgen to handle shift immediates that are different sizes than the
shifted operands, eliminating some code from the X86 fast isel backend.
4. Have FastISel::SelectBinaryOp use (the poorly named) FastEmit_ri_ function
instead of FastEmit_ri to simplify code.
llvm-svn: 129666
when we have a global variable base an an index. Instead, just give up on
folding the global variable.
Before we'd geenrate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
leaq (%rax), %rax
addq %rdi, %rax
movzbl (%rax), %eax
ret
now we generate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
movzbl (%rax,%rdi), %eax
ret
The difference is even more significant when there is a scale
involved.
This fixes rdar://9289558 - total fail with addr mode formation at -O0/x86-64
llvm-svn: 129664
less trivial things) into a dummy lea. Before we generated:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
leaq (%rax), %rax
ret
now we produce:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
ret
This is part of rdar://9289558
llvm-svn: 129662
The basic issue here is that bottom-up isel is matching the branch
and compare, and was failing to fold the load into the branch/compare
combo. Fixing this (by allowing folding into any instruction of a
sequence that is selected) allows us to produce things like:
cmpb $0, 52(%rax)
je LBB4_2
instead of:
movb 52(%rax), %cl
cmpb $0, %cl
je LBB4_2
This makes the generated -O0 code run a bit faster, but also speeds up
compile time by putting less pressure on the register allocator and
generating less code.
This was one of the biggest classes of missing load folding. Implementing
this shrinks 176.gcc's c-decl.s (as a random example) by about 4% in (verbose-asm)
line count.
llvm-svn: 129656
Change ELF systems to use CFI for producing the EH tables. This reduces the
size of the clang binary in Debug builds from 690MB to 679MB.
llvm-svn: 129571
This is done by pushing physical register definitions close to their
use, which happens to handle flag definitions if they're not glued to
the branch. This seems to be generally a good thing though, so I
didn't need to add a target hook yet.
The primary motivation is to generate code closer to what people
expect and rule out missed opportunity from enabling macro-op
fusion. As a side benefit, we get several 2-5% gains on x86
benchmarks. There is one regression:
SingleSource/Benchmarks/Shootout/lists slows down be -10%. But this is
an independent scheduler bug that will be tracked separately.
See rdar://problem/9283108.
Incidentally, pre-RA scheduling is only half the solution. Fixing the
later passes is tracked by:
<rdar://problem/8932804> [pre-RA-sched] on x86, attempt to schedule CMP/TEST adjacent with condition jump
Fixes:
<rdar://problem/9262453> Scheduler unnecessary break of cmp/jump fusion
llvm-svn: 129508
ignored. There was a test to catch this, but it was just blindly updated in
a large change. This fixes another part of <rdar://problem/9275290>.
llvm-svn: 129466
the max itself, so it is not easy to write a test case for this, but I added a
test case that would fail if the code in AsmPrinter were removed.
llvm-svn: 129432
Additional fixes:
Do something reasonable for subtargets with generic
itineraries by handle node latency the same as for an empty
itinerary. Now nodes default to unit latency unless an itinerary
explicitly specifies a zero cycle stage or it is a TokenFactor chain.
Original fixes:
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make the ndoe latency adjustments work, I also
needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129421
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
llvm-svn: 129401
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make these heuristic adjustments to node latency work,
I also needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129383
induction variable. The preRA scheduler is unaware of induction vars,
so we look for potential "virtual register cycles" instead.
Fixes <rdar://problem/8946719> Bad scheduling prevents coalescing
llvm-svn: 129100
There can be multiple defs for a single virtual register when they are defining
sub-registers.
The missing <dead> flag was stopping the inline spiller from eliminating dead
code after rematerialization.
llvm-svn: 128888
When a virtual register has a single value that is defined as a copy of a
reserved register, permit that copy to be joined. These virtual register are
usually copies of the stack pointer:
%vreg75<def> = COPY %ESP; GR32:%vreg75
MOV32mr %vreg75, 1, %noreg, 0, %noreg, %vreg74<kill>
MOV32mi %vreg75, 1, %noreg, 8, %noreg, 0
MOV32mi %vreg75<kill>, 1, %noreg, 4, %noreg, 0
CALLpcrel32 ...
Coalescing these virtual registers early decreases register pressure.
Previously, they were coalesced by RALinScan::attemptTrivialCoalescing after
register allocation was completed.
The lower register pressure causes the mcinst-lowering-cmp0.ll test case to fail
because it depends on linear scan spilling a particular register.
I am deleting 2008-08-05-SpillerBug.ll because it is counting the number of
instructions emitted, and its revision history shows the 'correct' count being
edited many times.
llvm-svn: 128845
The code inserted by PPCTargetLowering::EmitInstrWithCustomInserter for ppc64 is
wrong, and I don't know how to fix it. It seems to be using the correct register
classes for pointers, but it inserts all 32-bit instructions.
llvm-svn: 128835
registers that arise from argument shuffling with the soft float ABI. These
instructions are particularly slow on Cortex A8. This fixes one half of
<rdar://problem/8674845>.
llvm-svn: 128759
This way, shrinkToUses() will ignore the instruction that is about to be
deleted, and we avoid leaving invalid live ranges that SplitKit doesn't like.
Fix a misunderstanding in MachineVerifier about <def,undef> operands. The
<undef> flag is valid on def operands where it has the same meaning as <undef>
on a use operand. It only applies to sub-register defines which also read the
full register.
llvm-svn: 128642
The rematerialized instruction may require a more constrained register class
than the register being spilled. In the test case, the spilled register has been
inflated to the DPR register class, but we are rematerializing a load of the
ssub_0 sub-register which only exists for DPR_VFP2 registers.
The register class is reinflated after spilling, so the conservative choice is
only temporary.
llvm-svn: 128610
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
llvm-svn: 128502
isel lowering to fold the zero-extend's and take advantage of no-stall
back to back vmul + vmla:
vmull q0, d4, d6
vmlal q0, d5, d6
is faster than
vaddl q0, d4, d5
vmovl q1, d6
vmul q0, q0, q1
This allows us to vmull + vmlal for:
f = vmull_u8( vget_high_u8(s), c);
f = vmlal_u8(f, vget_low_u8(s), c);
rdar://9197392
llvm-svn: 128444
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
llvm-svn: 128327
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
llvm-svn: 128320
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
llvm-svn: 128284
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
llvm-svn: 128179
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
llvm-svn: 128114
These ranges get completely jumbled by the post-ra scheduler, and it is not
really reasonable to expect it to make sense of them.
Instead, teach DwarfDebug to notice when user variables in registers are
clobbered, and terminate the ranges there.
llvm-svn: 128045
to have single return block (at least getting there) for optimizations. This
is general goodness but it would prevent some tailcall optimizations.
One specific case is code like this:
int f1(void);
int f2(void);
int f3(void);
int f4(void);
int f5(void);
int f6(void);
int foo(int x) {
switch(x) {
case 1: return f1();
case 2: return f2();
case 3: return f3();
case 4: return f4();
case 5: return f5();
case 6: return f6();
}
}
=>
LBB0_2: ## %sw.bb
callq _f1
popq %rbp
ret
LBB0_3: ## %sw.bb1
callq _f2
popq %rbp
ret
LBB0_4: ## %sw.bb3
callq _f3
popq %rbp
ret
This patch teaches codegenprep to duplicate returns when the return value
is a phi and where the phi operands are produced by tail calls followed by
an unconditional branch:
sw.bb7: ; preds = %entry
%call8 = tail call i32 @f5() nounwind
br label %return
sw.bb9: ; preds = %entry
%call10 = tail call i32 @f6() nounwind
br label %return
return:
%retval.0 = phi i32 [ %call10, %sw.bb9 ], [ %call8, %sw.bb7 ], ... [ 0, %entry ]
ret i32 %retval.0
This allows codegen to generate better code like this:
LBB0_2: ## %sw.bb
jmp _f1 ## TAILCALL
LBB0_3: ## %sw.bb1
jmp _f2 ## TAILCALL
LBB0_4: ## %sw.bb3
jmp _f3 ## TAILCALL
rdar://9147433
llvm-svn: 127953
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
llvm-svn: 127951
- Emit mad instead of mad.rn for shader model 1.0
- Emit explicit mov.u32 instructions for reading global variables
- (most PTX instructions cannot take global variable immediates)
llvm-svn: 127895
comparisons on x86. Essentially, the way this works is that SUB+SBB sets
the relevant flags the same way a double-width CMP would.
This is a substantial improvement over the generic lowering in LLVM. The output
is also shorter than the gcc-generated output; I haven't done any detailed
benchmarking, though.
llvm-svn: 127852
rather than an int. Thankfully, this only causes LLVM to miss optimizations, not
generate incorrect code.
This just fixes the zext at the return. We still insert an i32 ZextAssert when
reading a function's arguments, but it is followed by a truncate and another i8
ZextAssert so it is not optimized.
llvm-svn: 127766
v2 = bitcast v1
...
v3 = bitcast v2
...
= v3
=>
v2 = bitcast v1
...
= v1
if v1 and v3 are of in the same register class.
bitcast between i32 and fp (and others) are often not nops since they
are in different register classes. These bitcast instructions are often
left because they are in different basic blocks and cannot be
eliminated by dag combine.
rdar://9104514
llvm-svn: 127668
Also more cleanly separate the ARM vs. Thumb functionality. Previously, the
encoding would be incorrect for some Thumb instructions (the indirect calls).
llvm-svn: 127637
Optimize trivial branches in CodeGenPrepare, which often get created from the
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
llvm-svn: 127498
protector insertion not working correctly with unreachable code. Since that
revision was rolled out, this test doesn't actual fail before this fix.
llvm-svn: 127497
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
llvm-svn: 127459
The damage done by physreg coalescing only depends on the number of instructions
the extended physreg live range covers. This fixes PR9438.
The heuristic is still luck-based, and physreg coalescing really should be
disabled completely. We need a register allocator with better hinting support
before that is possible.
Convert a test to FileCheck and force spilling by inserting an extra call. The
previous spilling behavior was dependent on misguided physreg coalescing
decisions.
llvm-svn: 127351
The test is derived from an old miscompilation of
MultiSource/Benchmarks/VersaBench/8b10b which is run regularly, so we are not
losing coverage.
llvm-svn: 127350
testcases accordingly. Some are currently xfailed and will be filed
as bugs to be fixed or understood.
Performance results:
roughly neutral on SPEC
some micro benchmarks in the llvm suite are up between 100 and 150%, only
a pair of regressions that are due to be investigated
john-the-ripper saw:
10% improvement in traditional DES
8% improvement in BSDI DES
59% improvement in FreeBSD MD5
67% improvement in OpenBSD Blowfish
14% improvement in LM DES
Small compile time impact.
llvm-svn: 127208
There was a previous implementation with patterns that would
have matched e.g.
shl <v4i32> <i32>,
but this is not valid LLVM IR so they never were selected.
llvm-svn: 126998
- Allow i16, i32, i64, float, and double types, using the native .u16,
.u32, .u64, .f32, and .f64 PTX types.
- Allow loading/storing of all primitive types.
- Allow primitive types to be passed as parameters.
- Allow selection of PTX Version and Shader Model as sub-target attributes.
- Merge integer/floating-point test cases for load/store.
- Use .u32 instead of .s32 to conform to output from NVidia nvcc compiler.
Patch by Justin Holewinski
llvm-svn: 126824
- Add appropriate TableGen patterns for fadd, fsub, fmul.
- Add .f32 as the PTX type for the LLVM float type.
- Allow parameters, return values, and global variable declarations
to accept the float type.
- Add appropriate test cases.
Patch by Justin Holewinski
llvm-svn: 126636
1. Inform users of ADDEs with two 0 operands that it never sets carry
2. Fold other ADDs or ADDCs into the ADDE if possible
It would be neat if we could do the same thing for SETCC+ADD eventually, but we can't do that in target independent code.
llvm-svn: 126557
Limit the folding of any_ext and sext into the load operation to scalars.
Limit the active-bits trunc optimization to scalars.
Document vector trunc and vector sext in LangRef.
Similar to commit 126080 (for enabling zext).
llvm-svn: 126424
registers at phis. This enables us to eliminate a lot of pointless zexts during
the DAGCombine phase. This fixes <rdar://problem/8760114>.
llvm-svn: 126380
The previous codegen for the slow path (when values are in VFP / NEON
registers) was incorrect if the source is NaN.
The new codegen uses NEON vbsl instruction to copy the sign bit. e.g.
vmov.i32 d1, #0x80000000
vbsl d1, d2, d0
If NEON is not available, it uses integer instructions to copy the sign bit.
rdar://9034702
llvm-svn: 126295
In other words, do not keep track of argument's location. The debugger (gdb) is not prepared to see line table entries for arguments. For the debugger, "second" line table entry marks beginning of function body.
This requires some coordination with debugger to get this working.
- The debugger needs to be aware of prolog_end attribute attached with line table entries.
- The compiler needs to accurately mark prolog_end in line table entries (at -O0 and at -O1+)
llvm-svn: 126155
"dllimport" function must not be GlobalVariable, but Function. It is enough to check with GlobalValue.
test/CodeGen/X86/dll-linkage.ll is updated to check llc -O0.
llvm-svn: 126110
of a constant had a minor typo introduced when copying it from the book, which
caused it to favor negative approximations over positive approximations in many
cases. Positive approximations require fewer operations beyond the multiplication.
In the case of division by 3, we still generate code that is a single instruction
larger than GCC's code.
llvm-svn: 126097
test for that. With this change, test/CodeGen/X86/codegen-dce.ll no longer finds
any instructions to DCE, so delete the test.
Also renamed J and JP to I and IP in RecursivelyDeleteDeadPHINode.
llvm-svn: 126088
The DAGCombiner folds the zext into complex load instructions. This patch
prevents this optimization on vectors since none of the supported targets
knows how to perform load+vector_zext in one instruction.
llvm-svn: 126080
No one uses *-mingw64. mingw-w64 is represented as {i686|x86_64}-w64-mingw32. In llvm side, i686 and x64 can be treated as similar way.
llvm-svn: 125747
transformation if we can't legally create a build vector of the correct
type. Check that we can make the transformation first, and add a TODO to
refactor this code with similar cases.
Fixes: PR9223 and rdar://9000350
llvm-svn: 125631
Machine instruction range consisting of only DBG_VALUE MIs only contributes consecutive labels in assembly output, which is harmless, and empty scope entry in DebugInfo, which confuses debugger tools.
llvm-svn: 125577
The i64_buildvector test in this file relies on the alignment of i64 and
f64 types being the same, which is true for Darwin but not AAPCS.
llvm-svn: 125525
have their low bits set to zero. This allows us to optimize
out explicit stack alignment code like in stack-align.ll:test4 when
it is redundant.
Doing this causes the code generator to start turning FI+cst into
FI|cst all over the place, which is general goodness (that is the
canonical form) except that various pieces of the code generator
don't handle OR aggressively. Fix this by introducing a new
SelectionDAG::isBaseWithConstantOffset predicate, and using it
in places that are looking for ADD(X,CST). The ARM backend in
particular was missing a lot of addressing mode folding opportunities
around OR.
llvm-svn: 125470
The DAGCombiner created illegal BUILD_VECTOR operations.
The patch added a check that either illegal operations are
allowed or that the created operation is legal.
llvm-svn: 125435
This
define float @foo(float %x, float %y) nounwind readnone {
entry:
%0 = tail call float @copysignf(float %x, float %y) nounwind readnone
ret float %0
}
Was compiled to:
vmov s0, r1
bic r0, r0, #-2147483648
vmov s1, r0
vcmpe.f32 s0, #0
vmrs apsr_nzcv, fpscr
it lt
vneglt.f32 s1, s1
vmov r0, s1
bx lr
This fails to copy the sign of -0.0f because it's lost during the float to int
conversion. Also, it's sub-optimal when the inputs are in GPR registers.
Now it uses integer and + or operations when it's profitable. And it's correct!
lsrs r1, r1, #31
bfi r0, r1, #31, #1
bx lr
rdar://8984306
llvm-svn: 125357
The vld1-lane, vld1-dup and vst1-lane instructions do not yet support using
post-increment versions, but all the rest of the NEON load/store instructions
should be handled now.
llvm-svn: 125014
Reversing the operands allows us to fold, but doesn't force us to. Also, at
this point the DAG is still being optimized, so the check for hasOneUse is not
very precise.
llvm-svn: 124773
the load, then it may be legal to transform the load and store to integer
load and store of the same width.
This is done if the target specified the transformation as profitable. e.g.
On arm, this can transform:
vldr.32 s0, []
vstr.32 s0, []
to
ldr r12, []
str r12, []
rdar://8944252
llvm-svn: 124708
This happens all the time when a smul is promoted to a larger type.
On x86-64 we now compile "int test(int x) { return x/10; }" into
movslq %edi, %rax
imulq $1717986919, %rax, %rax
movq %rax, %rcx
shrq $63, %rcx
sarq $34, %rax <- used to be "shrq $32, %rax; sarl $2, %eax"
addl %ecx, %eax
This fires 96 times in gcc.c on x86-64.
llvm-svn: 124559
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.
It's now enabled by default for Darwin.
llvm-svn: 123991
DAG. Disable using "-disable-sched-cycles".
For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.
Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
operations can have their latency covered. i.e. two independent 4
cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
latency-based stalls on their uses will be prioritized by depth before height
(height is irrelevant if no stalls occur in the schedule below this point).
llvm-svn: 123971
flags. They are still not enable in this revision.
Added TargetInstrInfo::isZeroCost() to fix a fundamental problem with
the scheduler's model of operand latency in the selection DAG.
Generalized unit tests to work with sched-cycles.
llvm-svn: 123969
value, the "add pc" must be CSE'ed at the same time. We could follow the same
approach as T2 by adding pseudo instructions that combine the ldr + "add pc".
But the better approach is to use movw + movt (which I will enable soon), so
I'll leave this as a TODO.
llvm-svn: 123949
to add/sub by doing the normal operation and then checking for overflow
afterwards. This generally relies on the DAG handling the later invalid
operations as well.
Fixes the 64-bit part of rdar://8622122 and rdar://8774702.
llvm-svn: 123908
TargetInstrInfo:
Change produceSameValue() to take MachineRegisterInfo as an optional argument.
When in SSA form, targets can use it to make more aggressive equality analysis.
Machine LICM:
1. Eliminate isLoadFromConstantMemory, use MI.isInvariantLoad instead.
2. Fix a bug which prevent CSE of instructions which are not re-materializable.
3. Use improved form of produceSameValue.
ARM:
1. Teach ARM produceSameValue to look pass some PIC labels.
2. Look for operands from different loads of different constant pool entries
which have same values.
3. Re-implement PIC GA materialization using movw + movt. Combine the pair with
a "add pc" or "ldr [pc]" to form pseudo instructions. This makes it possible
to re-materialize the instruction, allow machine LICM to hoist the set of
instructions out of the loop and make it possible to CSE them. It's a bit
hacky, but it significantly improve code quality.
4. Some minor bug fixes as well.
With the fixes, using movw + movt to materialize GAs significantly outperform the
load from constantpool method. 186.crafty and 255.vortex improved > 20%, 254.gap
and 176.gcc ~10%.
llvm-svn: 123905
with an invalid type then split the result and perform the overflow check
normally.
Fixes the 32-bit parts of rdar://8622122 and rdar://8774702.
llvm-svn: 123864
This shaves off 4 popcounts from the hacked 186.crafty source.
This is enabled even when a native popcount instruction is available. The
combined code is one operation longer but it should be faster nevertheless.
llvm-svn: 123621
movw r0, :lower16:(L_foo$non_lazy_ptr-(LPC0_0+4))
movt r0, :upper16:(L_foo$non_lazy_ptr-(LPC0_0+4))
LPC0_0:
add r0, pc, r0
It's not yet enabled by default as some tests are failing. I suspect bugs in
down stream tools.
llvm-svn: 123619
into and/shift would cause nodes to move around and a dangling pointer
to happen. The code tried to avoid this with a HandleSDNode, but
got the details wrong.
llvm-svn: 123578
There's an inherent tension in DAGCombine between assuming
that things will be put in canonical form, and the Depth
mechanism that disables transformations when recursion gets
too deep. It would not surprise me if there's a lot of little
bugs like this one waiting to be discovered. The mechanism
seems fragile and I'd suggest looking at it from a design viewpoint.
llvm-svn: 123191
Instead encode llvm IR level property "HasSideEffects" in an operand (shared
with IsAlignStack). Added MachineInstrs::hasUnmodeledSideEffects() to check
the operand when the instruction is an INLINEASM.
This allows memory instructions to be moved around INLINEASM instructions.
llvm-svn: 123044
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
llvm-svn: 122995
The theory is it's still faster than a pair of movq / a quad of movl. This
will probably hurt older chips like P4 but should run faster on current
and future Intel processors. rdar://8817010
llvm-svn: 122955
up freebsd bootloader. However, this doesn't make much sense for Darwin, whose
-Os is meant to optimize for size only if it doesn't hurt performance.
rdar://8821501
llvm-svn: 122936
prologue and epilogue if the adjustment is 8. Similarly, use pushl / popl if
the adjustment is 4 in 32-bit mode.
In the epilogue, takes care to pop to a caller-saved register that's not live
at the exit (either return or tailcall instruction).
rdar://8771137
llvm-svn: 122783
This allows us to compile:
void test(char *s, int a) {
__builtin_memset(s, a, 15);
}
into 1 mul + 3 stores instead of 3 muls + 3 stores.
llvm-svn: 122710
We could implement a DAGCombine to turn x * 0x0101 back into logic operations
on targets that doesn't support the multiply or it is slow (p4) if someone cares
enough.
Example code:
void test(char *s, int a) {
__builtin_memset(s, a, 4);
}
before:
_test: ## @test
movzbl 8(%esp), %eax
movl %eax, %ecx
shll $8, %ecx
orl %eax, %ecx
movl %ecx, %eax
shll $16, %eax
orl %ecx, %eax
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
after:
_test: ## @test
movzbl 8(%esp), %eax
imull $16843009, %eax, %eax ## imm = 0x1010101
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
llvm-svn: 122707
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
llvm-svn: 122521
In the bottom-up selection DAG scheduling, handle two-address
instructions that read/write unspillable registers. Treat
the entire chain of two-address nodes as a single live range.
llvm-svn: 122472
loads properly. We miscompiled the testcase into:
_test: ## @test
movl $128, (%rdi)
movzbl 1(%rdi), %eax
ret
Now we get a proper:
_test: ## @test
movl $128, (%rdi)
movsbl (%rdi), %eax
movzbl %ah, %eax
ret
This fixes PR8757.
llvm-svn: 122392
count operand. These should be the same but apparently are
not always, and this is cleaner anyway. This improves the
code in an existing test.
llvm-svn: 122354
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
llvm-svn: 122319
the same as setcc. Optimize ADDC(0,0,FLAGS) -> SET_CARRY(FLAGS). This is
a step towards finishing off PR5443. In the testcase in that bug we now get:
movq %rdi, %rax
addq %rsi, %rax
sbbq %rcx, %rcx
testb $1, %cl
setne %dl
ret
instead of:
movq %rdi, %rax
addq %rsi, %rax
movl $0, %ecx
adcq $0, %rcx
testq %rcx, %rcx
setne %dl
ret
llvm-svn: 122219
doesn't, match it back to setb.
On a 64-bit version of the testcase before we'd get:
movq %rdi, %rax
addq %rsi, %rax
sbbb %dl, %dl
andb $1, %dl
ret
now we get:
movq %rdi, %rax
addq %rsi, %rax
setb %dl
ret
llvm-svn: 122217
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
llvm-svn: 122155
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
llvm-svn: 122104
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
llvm-svn: 122102
Evan Cheng