Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
Some of instantiation-dependent expressions could cause false diagnostic to be emitted about unsupported atomic constructs. Relaxed rules for detection of incorrect expressions.
llvm-svn: 246853
Fix processing of shared variables with reference types in OpenMP constructs. Previously, if the variable was not marked in one of the private clauses, the reference to this variable was emitted incorrectly and caused an assertion later.
llvm-svn: 246846
Fixed codegen for extended format of 'if' clauses with special 'directive-name-modifier' + ast-print tests for extended format of 'if' clause.
llvm-svn: 246748
OpenMP 4.1 added special 'directive-name-modifier' to the 'if' clause.
Format of 'if' clause is as follows:
```
if([ directive-name-modifier :] scalar-logical-expression)
```
The restriction rules are also changed.
1. If any 'if' clause on the directive includes a 'directive-name-modifier' then all 'if' clauses on the directive must include a 'directive-name-modifier'.
2. At most one 'if' clause without a 'directive-name-modifier' can appear on the directive.
3. At most one 'if' clause with some particular 'directive-name-modifier' can appear on the directive.
'directive-name-modifier' is important for combined directives and allows to separate conditions in 'if' clause for simple sub-directives in combined directive. This 'directive-name-modifier' identifies the sub-directive to which this 'if' clause must be applied.
llvm-svn: 246747
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246422
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246278
The ABI string only exists to communicate with TargetCodeGenInfo.
Concretely, since we only used "avx*" ABI strings on x86_64 (as AVX
doesn't affect the i386 ABIs), this meant that, when initializing
SimdDefaultAlign, we would ignore AVX/AVX512 on i386, for no good
reason.
Instead, directly check the features. A similar change for
MaxVectorAlign will follow.
Differential Revision: http://reviews.llvm.org/D12390
llvm-svn: 246228
Adds parsing/sema analysis/serialization/deserialization for array sections in OpenMP constructs (introduced in OpenMP 4.0).
Currently it is allowed to use array sections only in OpenMP clauses that accepts list of expressions.
Differential Revision: http://reviews.llvm.org/D10732
llvm-svn: 245937
Add emission of metadata for simd loops in presence of 'simdlen' clause.
If 'simdlen' clause is provided without 'safelen' clause, the vectorizer width for the loop is set to value of 'simdlen' clause + all read/write ops in loop are marked with '!llvm.mem.parallel_loop_access' metadata.
If 'simdlen' clause is provided along with 'safelen' clause, the vectorizer width for the loop is set to value of 'simdlen' clause + all read/write ops in loop are not marked with '!llvm.mem.parallel_loop_access' metadata.
If 'safelen' clause is provided without 'simdlen' clause, the vectorizer width for the loop is set to value of 'safelen' clause + all read/write ops in loop are not marked with '!llvm.mem.parallel_loop_access' metadata.
llvm-svn: 245697
Add parsing/sema analysis for 'simdlen' clause in simd directives. Also add check that if both 'safelen' and 'simdlen' clauses are specified, the value of 'simdlen' parameter is less than the value of 'safelen' parameter.
llvm-svn: 245692
According to standard the 'uval' modifier declares the address of the original list item to have an invariant value for all iterations of the associated loop(s). Patch improves codegen for this qualifier by removing usage of the original reference variable and replacing by referenced l-value.
llvm-svn: 245674
Standard allows to use 'uval' and 'ref' modifiers in 'linear' clause for variables with reference types only. Added check for it and modified test.
llvm-svn: 245556
OpenMP 4.1 adds 3 optional modifiers to 'linear' clause.
Format of 'linear' clause has changed to:
```
linear(linear-list[ : linear-step])
```
where linear-list is one of the following
```
list
modifier(list)
```
where modifier is one of the following:
```
ref (C++)
val (C/C++)
uval (C++)
```
Patch adds parsing and sema analysis for these modifiers.
llvm-svn: 245550
Adds libomp.lib for -fopenmp=libomp and libiomp5md.lib for -fopenmp=libiomp5 on Windows
Differential Revision: http://reviews.llvm.org/D11932
llvm-svn: 245414
OpenMP 4.1 allows to use variables with reference types in all private clauses (private, firstprivate, lastprivate, linear etc.). Patch allows to use such variables and fixes codegen for linear variables with reference types.
llvm-svn: 245268
blender uses statements expression in condition of the loop under control of the '#pragma omp parallel for'. This condition is used several times in different expressions required for codegen of the loop directive. If there are some variables defined in statement expression, it fires an assert during codegen because of redefinition of the same variables.
We have to rebuild several expression to be sure that all variables are unique.
llvm-svn: 245041
OpenMP 4.1 allows to use variables with reference types in private clauses and, therefore, in init expressions of the cannonical loop forms.
llvm-svn: 244209
If a global variable is marked as private in OpenMP construct and then is used in of the private clauses of the same construct, it might cause compiler crash because of incorrect capturing.
llvm-svn: 243964
OpenMP 4.1 introduces optional argument '(n)' for 'ordered' clause, where 'n' is a number of loops that immediately follow the directive.
'n' must be constant positive integer expressions and it must be less or equal than the number of the loops in the resulting loop nest.
Patch adds parsing and semantic analysis for this optional argument.
llvm-svn: 243635
If the variable is marked as private in OpenMP construct, the reference to this variable should not keep type qualifiers for the original variable. Private copy is not volatile or constant, so we can use unqualified type for private copy.
llvm-svn: 242133
This patch adds ObjectFilePCHContainerOperations uses the LLVM backend
to put the contents of a PCH into a __clangast section inside a COFF, ELF,
or Mach-O object file container.
This is done to facilitate module debugging by makeing it possible to
store the debug info for the types defined by a module alongside the AST.
rdar://problem/20091852
llvm-svn: 241620
The next code is generated for this construct:
```
if (__kmpc_cancellationpoint(ident_t *loc, kmp_int32 global_tid, kmp_int32 cncl_kind) != 0)
<exit from outer innermost construct>;
```
llvm-svn: 241239
Several tests wouldn't pass when executed on an armv7a_pc_linux triple
due to the non-default arm_aapcs calling convention produced on the
function definitions in the IR output. Account for this with the
application of a little regex.
Patch by Ying Yi.
llvm-svn: 240971
John McCall