This was always set to 0. Use a default value of 0 in this context to
satisfy the instruction definition patterns. We can't unconditionally
use SLC with a default value of 0 due to limitations in TableGen's
handling of defaulted operands when followed by non-default operands.
The VGPR component is a 32-bit offset, not 64-bits.
I'm not sure what the correct syntax is for this. This maintains the
vaddr position and leaves saddr in the end "off" position. This is
particularly terrible for stores, since the operand order is now <vgpr
offset>, <data>, <sgpr base>, splitting the pointer operands. I
suppose this is a logical consequence from the mistake of not putting
the data operand first. I'm not sure what sp3 does.
This was only used for matching the saddr addressing mode of global
instructions, but this was not implemented correctly. The instruction
definitions aren't even correct, and are defined as using a 64-bit
VGPR component. Eliminate this pass to enable correcting the
instruction definitions. A new matching implementation can work in
GlobalISel or relying on DAG divergence information for the base
address.
When adding elements when iterating, the iterator will become
valid, which could cause errors. This fixes the issue by using
indexes instead of iterator.
This patch internalize non-exact functions and replaces of their uses
with the internalized version. Doing this enables the analysis of
non-exact functions.
We can do this because some non-exact functions with the same name
whose linkage is `linkonce_odr` or `weak_odr` should have the same
semantics, so we can safely internalize and replace use of them (the
result of the other version of this function should be the same.).
Note that not all functions can be internalized, e.g., function with
`linkonce` or `weak` linkage.
For now when specified in commandline, we internalize all functions
that meet the requirements without calculating the cost of such
internalzation.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84167
Otherwise, lots of these tests fail with a CHECK error similar to:
==12345==AddressSanitizer CHECK failed: compiler-rt/lib/asan/asan_posix.cpp:120 "((0)) == ((pthread_key_create(&tsd_key, destructor)))" (0x0, 0x4e)
This is because the default pthread stubs in FreeBSD's libc always
return failures (such as ENOSYS for pthread_key_create) in case the
pthread library is not linked in.
Reviewed By: arichardson
Differential Revision: https://reviews.llvm.org/D85082
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
Differential Revision: https://reviews.llvm.org/D85622
This reverts commit 6dbf0cfcf7.
That commit caused failed assertions, e.g. like this:
$ cat sprintf-strcpy.c
char *ptr; void func(void) { ptr += sprintf(ptr, "%s", ""); }
$ clang -c sprintf-strcpy.c -O2 -target x86_64-linux-gnu
clang: ../lib/IR/Value.cpp:473: void llvm::Value::doRAUW(llvm::Value*,
llvm::Value::ReplaceMetadataUses): Assertion `New->getType() ==
getType() && "replaceAllUses of value with new value of different
type!"' failed.
These tests use the statepoint-example builtin gc which expects address space #1 to the only non-integral address space. The fact the test used as=0 happened to work, but was caught by a downstream assert. (Literally years ago, I just happened to notice the XFAIL and fix it now.)
This code becomes dead for valid IR after 48f4312 and a96fc46. The reason for the test change is that the verifier reports the first verification error encountered, in some non-specified visit order. By removing the verification code in gc.relocates for a statepoint with inline gc operands, I change the error the verifier reports. And in one case, the checked for error is no longer possible with the bundle representation, so I simply delete the file.
The "gc-live" operand bundles were recently added, and all tests have been updated to use that format. A migration period was provided, though it's worth noting these intrinsics are experimental, so formally there is no compatibile requirement.
This is an extension to a96fc46. "gc-live" hadn't been implemented at the point that patch was initially posted.
It did not process hazard for ds_permute because it does not
load or store even though it is DS.
Differential Revision: https://reviews.llvm.org/D86003
Transformation creates big strings for big C values, so bail out for C > 128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86004
This would be a problem if the entire instrumented function was a call
to
e.g. memcpy
Use FnPrologueEnd Instruction* instead of ActualFnStart BB*
Differential Revision: https://reviews.llvm.org/D86001
(Forgot to land this a couple of weeks back.)
In a recent series of changes, I've introduced support for using the respective operand bundle kinds on the statepoint. At the moment, code supports either/or, but there's no need to keep the old support around. For the moment, I am simply changing the specification and verifier to require zero length argument sets in the intrinsic.
The intrinsic itself is experimental. Given that, there's no forward serialization needed. The in tree uses and generation have already been updated to use the new operand bundle based forms, the only folks broken by the change will be those with frontends generating statepoints directly and the updates should be easy.
Why not go ahead and just remove the arguments entirely? Well, I plan to. But while working on this I've found that almost all of the arguments to the statepoint can be expressed via operand bundles or attributes. Given that, I'm planning a radical simplification of the arguments and figured I'd do one update not several small ones.
Differential Revision: https://reviews.llvm.org/D80892
This is in preparation for enabling proper handling of optnone under the
NPM. Most optimizations won't run on an optnone function.
Previously the test would rely on lots of optimizations to optimize the
IR into a simple infinite loop. This is an optnone function, so clearly
that shouldn't be the case.
This IR was found by printing the module before the LoopFullUnrollerPass ran.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D85578
This was done by turning on -enable-npm-optnone and fixing failures.
That will be enabled in a follow-up change for ease of reverting.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D85457
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
The assembly parser "canonicalizes" the mnemonics it processes at an
early level by making them lowercase. The goal of this is presumably to
allow assembly to be case-insensitive. However, if one declares an
instruction with a mnemonic using uppercase letters, then it will
never get matched, since the generated lookup tables for the
AsmMatcherEmitter didn't lower() their inputs. This made it difficult to
have instructions that get printed using a mnemonic that includes
uppercase letters, since they could not be parsed.
To fix this problem, this patch adds a few calls to lower() to make the
lookup tables used in AsmMatcherEmitter be case-insensitive. This allows
instruction mnemonics with uppercase letters to be parsed.
Differential Revision: https://reviews.llvm.org/D85858
This allows us to add addtional instrumentation before the function start,
without splitting the first BB.
Differential Revision: https://reviews.llvm.org/D85985
Have the front-end use the `nounwind` attribute on atomic libcalls.
This prevents us from seeing `invoke __atomic_load` in MSAN, which
is problematic as it has no successor for instrumentation to be added.
A unique module id, which is a part of sinit and sterm function names, is
necessary to be unique. However, `getUniqueModuleId` will fail if there is
no strong external symbol within a module. We turn to use Pid and timestamp
when this happens.
Differential Revision: https://reviews.llvm.org/D85527
Shoaib Meenai