This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Guard the MIPS64 variant correctly for i64, mark the MIPS32 version as not
in microMIPS and provide the microMIPS version.
Additionally, remove a related stale XFAIL'd test as bswap has its own test
case providing coverage.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45816
llvm-svn: 330705
These instructions lacked the correct predicates, were not marked
as loads and stores and lacked the proper instruction mapping information.
In the case of microMIPS sw(l|r)e (EVA) these instructions were using the load
EVA description.
Reviewers: abeserminji, smaksimovic, atanasyan
Differential Revision: https://reviews.llvm.org/D45626
llvm-svn: 330326
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
This patch provides mitigation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLVM part of
-mindirect-jump=hazard. It is _not_ enabled by default for the P5600.
The migitation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are used with the attribute +use-indirect-jump-hazard
when branching indirectly and for indirect function calls.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
Performance benchmarking of this option with -fpic and lld using
-z hazardplt shows a difference of overall 10%~ time increase
for the LLVM testsuite. Certain benchmarks such as methcall show a
substantially larger increase in time due to their nature.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D43486
llvm-svn: 325653
This patch includes EVA instructions in the Std2MicroMips mapping
tables, which is required for direct object emission.
Differential Revision: https://reviews.llvm.org/D41771
llvm-svn: 323958
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
Correct the definition of 'j' as being unavailable for microMIPS32R6 and
provide the 'b' assembly idiom for codegen purposes for microMIPS32r3.
Provide the necessary 'br' pattern for microMIPS32R6 as it now longer
incorrectly uses the 'j' instruction.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39741
llvm-svn: 317801
Previously these pseudo instructions were not guarded by ISA, so their
select was dependant on the ordering of the entries in the DAG matcher.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39723
llvm-svn: 317681
Previously, the 'movep' instruction was defined for microMIPS32r3 and
shared that definition with microMIPS32R6. 'movep' was re-encoded for
microMIPS32r6, so this patch provides the correct encoding.
Secondly, correct the encoding of the 'rs' and 'rt' operands which have
an instruction specific encoding for the registers those operands accept.
Finally, correct the decoding of the 'dst_regs' operand which was extracting
the relevant field from the instruction, but was actually extracting the
field from the alreadly extracted field.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39495
llvm-svn: 317475
Change the ISel matching of 'ins', 'dins[mu]' from tablegen code to
C++ code. This resolves an issue where ISel would select 'dins' instead
of 'dinsm' when the instructions size and position were individually in
range but their sum was out of range according to the ISA specification.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39117
llvm-svn: 317331
This patch complements D16810 "[mips] Make isel select the correct DEXT variant
up front.". Now ISel picks the right variant of DINS, so now there is no need
to replace DINS with the appropriate variant during
MipsMCCodeEmitter::encodeInstruction().
This patch also enables target specific instruction verification for ins, dins,
dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that
are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these
constraints are not checked during instruction selection. Adding machine
verification should catch outstanding cases.
Finally, correct a bug that instruction verification uncovered, where the
position operand of a DINSU generated during lowering was being silently
and accidently corrected to the correct value.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34809
llvm-svn: 313254
This patch adjusts the most relaxed predicate of immediate operands to accept
immediate forms such as ~(0xf0000000|0x000f00000). Previously these forms
would be accepted by GAS and rejected by IAS.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29218
llvm-svn: 295965
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
Add synci to the microMIPS instruction definitions, mark the MIPS sync & synci
as not being part of microMIPS. This does not cover the sync instruction alias,
as that will be handled with a different patch. Add sync to the valid tests for
microMIPS.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D25795
llvm-svn: 284962
Extend instruction definitions from nearly all ISAs to include
appropriate instruction itineraries. Change MIPS16s gp prologue
generation to use real instructions instead of using a pseudo
instruction.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23548
llvm-svn: 279623
r277708 enabled tails calls for MIPS but used the 'jr' instruction when the
jump target was held in a register. For MIPSR6, 'jalr $zero, $reg' should
have been used. Additionally, add missing patterns for external and global
symbols for tail calls.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23301
llvm-svn: 279064
Enable tail calls by default for (micro)MIPS(64).
microMIPS is slightly more tricky than doing it for MIPS(R6) or microMIPSR6.
microMIPS has two instruction encodings: 16bit and 32bit along with some
restrictions on the size of the instruction that can fill the delay slot.
For safe tail calls for microMIPS, the delay slot filler attempts to find
a correct size instruction for the delay slot of TAILCALL pseudos.
Reviewers: dsanders, vkalintris
Subscribers: jfb, dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D21138
llvm-svn: 277708
Add the instruction alias sgtu (register form only), two operand forms of
s[rl]l and sra, and missing single/two operand forms of dnegu/neg.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D22752
llvm-svn: 276736
Avoid MipsAnalyzeImmediate usage if the constant fits in an 32-bit
integer. This allows us to generate the same instructions for the
materialization of the same constants regardless the width of their
type.
Patch by: Vasileios Kalintiris
Contributions by: Simon Dardis
Reviewers: Daniel Sanders
Differential Review: https://reviews.llvm.org/D21689
llvm-svn: 276628
Summary:
Previously, it returned the GPR16MMRegClass for all instructions which was
incorrect for instructions like lwsp/lwgp and unnecesarily restricted the
permitted registers for instructions like lw32.
This fixes quite a few of the -verify-machineinstrs errors reported in PR27458.
I've only added -verify-machineinstrs to one test in this change since I
understand there is a plan to enable the verifier by default.
Reviewers: hvarga, zbuljan, zoran.jovanovic, sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19873
llvm-svn: 268918
Commit r266977 was reason for failing LLVM test suite with error message: fatal error: error in backend: Cannot select: t17: i32 = rotr t2, t11 ...
llvm-svn: 267418
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
Simon Dardis