In InputSection.cpp it was possible to dereference null.
Had to change signature of relocateTlsOptimize to accept pointer instead of reference.
Differential revision: http://reviews.llvm.org/D16466
llvm-svn: 258508
Some MIPS relocation (for now R_MIPS_GOT16) requires creation of GOT
entries for symbol not included in the dynamic symbol table. They are
local symbols and non-local symbols with 'local' visibility. Local GOT
entries occupy continuous block between GOT header and regular GOT
entries.
The patch adds initial support for handling local GOT entries. The main
problem is allocating local GOT entries for local symbols. Such entries
should be initialized by high 16-bit of the symbol value. In ideal world
there should be no duplicated entries with the same values. But at the
moment of the `Writer::scanRelocs` call we do not know a value of the
symbol. In this patch we create new local GOT entry for each relocation
against local symbol, though we can exhaust GOT quickly. That needs to
be optimized later. When we calculate relocation we know a final symbol
value and request local GOT entry index. To do that we maintain map
between addresses and local GOT entry indexes. If we start to calculate
relocations in parallel we will have to serialize access to this map.
Differential Revision: http://reviews.llvm.org/D16324
llvm-svn: 258388
R_X86_64_PLT32 is handled in the same way as R_X86_64_PC32 by
relocateOne(), so this function does not seems to be needed.
Without this code, all tests still pass.
http://reviews.llvm.org/D15971
llvm-svn: 257203
All non-trivial relocation decisions need explanations like this
to help readers understand not only how relocations are handled but
why they are handled these ways. This is a start.
llvm-svn: 257119
MipsReginfoInputSection is basically just a container of Elf_Mips_Reginfo
struct. This patch makes that struct directly accessible from others.
llvm-svn: 256984
The R_MIPS_GPREL16 / R_MIPS_GPREL32 relocations use the following
expressions for calculations:
```
local symbol: S + A + GP0 - GP
global symbol: S + A - GP
GP - Represents the final gp value, i.e. _gp symbol
GP0 - Represents the gp value used to create the relocatable object
```
The GP0 value is taken from the .reginfo data section defined by an object
file. To implement that I keep a reference to `MipsReginfoInputSection`
in the `ObjectFile` class. This reference is used by the
`ObjectFile::getMipsGp0` method to return the GP0 value.
Differential Revision: http://reviews.llvm.org/D15760
llvm-svn: 256416
The file crtbeginT.o has relocations pointing to the start of an empty
.eh_frame that is known to be the first in the link. It does that to
identify the start of the output .eh_frame. Handle this special case.
Differential revision: http://reviews.llvm.org/D15610
llvm-svn: 256414
There are 3 symbol types that a .bc can provide during lto: defined,
undefined, common.
Defined and undefined symbols have already been refactored. I was
working on common and noticed that absolute symbols would become an
oddity: They would be the only symbol type present in a .o but not in
a.bc.
Looking a bit more, other than the special section number they were only
used for special rules for computing values. In that way they are
similar to TLS, and we don't have a DefinedTLS.
This patch deletes it. With it we have a reasonable rule of the thumb
for having a symbol kind: It exists if it has special resolution
semantics.
llvm-svn: 256383
This patch changes sequence of applying relocations, moving tls optimized relocation handling code before code for other locals.
Without that change relocation @GOTTPOFF against local symbol caused runtime error ("unrecognized reloc ...").
That change also should fix other tls optimized relocations, but I did not check them, that's a field for another patch.
R_X86_64_GOTTPOFF relocations against locals can be found when linking against libc.a(malloc.o):
000000000036 000600000016 R_X86_64_GOTTPOFF 0000000000000000 libc_tsd_MALLOC - 4
000000000131 000600000016 R_X86_64_GOTTPOFF 0000000000000000 libc_tsd_MALLOC - 4
Differential revision: http://reviews.llvm.org/D15581
llvm-svn: 256145
MIPS .reginfo section provides information on the registers used by
the code in the object file. Linker should collect this information and
write .reginfo section in the output file. This section contains a union
of used registers masks taken from input .reginfo sections and final
value of the `_gp` symbol.
For details see the "Register Information" section in Chapter 4 in the
following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
The patch implements .reginfo sections handling with a couple missed
features: a) it does not put output .reginfo section into the separate
REGINFO segment; b) it does not merge `ri_cprmask` masks from input
section. These features will be implemented later.
Differential Revision: http://reviews.llvm.org/D15669
llvm-svn: 256119
@indntpoff is similar to @gotntpoff, but for use in position dependent code. While @gotntpoff resolves to GOT slot address relative to the
start of the GOT in the movl or addl instructions, @indntpoff resolves to the
absolute GOT slot address. ("ELF Handling For Thread-Local Storage", Ulrich Drepper).
Differential revision: http://reviews.llvm.org/D15494
llvm-svn: 255884
The `_gp_disp` is a magic symbol designates offset between start of
function and gp pointer into GOT. Only `R_MIPS_HI16` and `R_MIPS_LO16`
relocations are permitted with `_gp_disp`. The patch adds the `_gp_disp`
as an ignored symbol and adjusts symbol value before call the `relocateOne`
for `R_MIPS_HI16/LO16` relocations.
Differential Revision: http://reviews.llvm.org/D15480
llvm-svn: 255768
R_X86_64_SIZE64/R_X86_64_SIZE32 relocations were introduced in 0.98v of "System V Application Binary Interface x86-64" (http://www.x86-64.org/documentation/abi.pdf).
Calculation for them is Z + A, where:
Z - Represents the size of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
Differential revision: http://reviews.llvm.org/D15335
llvm-svn: 255332
"Ulrich Drepper, ELF Handling For Thread-Local Storage" (5.5 x86-x64 linker optimizations, http://www.akkadia.org/drepper/tls.pdf) shows how GD can be optimized to IE.
This patch implements the optimization.
Differential revision: http://reviews.llvm.org/D15000
llvm-svn: 254713
Some MIPS relocations including `R_MIPS_HI16/R_MIPS_LO16` use combined
addends. Such addend is calculated using addends of both paired relocations.
Each `R_MIPS_HI16` relocation is paired with the next `R_MIPS_LO16`
relocation. ABI requires to compute such combined addend in case of REL
relocation record format only.
For details see p. 4-17 at
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
This patch implements lookup of the next paired relocation suing new
`InputSectionBase::findPairedRelocLocation` method. The primary
disadvantage of this approach is that we put MIPS specific logic into
the common code. The next disadvantage is that we lookup `R_MIPS_LO16`
for each `R_MIPS_HI16` relocation, while in fact multiple `R_MIPS_HI16`
might be paired with the single `R_MIPS_LO16`. From the other side
this way allows us to keep `MipsTargetInfo` class stateless and implement
later relocation handling in parallel.
This patch does not support `R_MIPS_HI16/R_MIPS_LO16` relocations against
`_gp_disp` symbol. In that case the relocations use a special formula for
the calculation. That will be implemented later.
Differential Revision: http://reviews.llvm.org/D15112
llvm-svn: 254461
Combination of @tlsgd and @gottpoff at the same time leads to miss of R_X86_64_TPOFF64 dynamic relocation. Patch fixes that.
@tlsgd(%rip) - Allocate two contiguous entries in the GOT to hold a tls index
structure (for passing to tls get addr).
@gottpoff(%rip) - Allocate one GOT entry to hold a variable offset in initial TLS
block (relative to TLS block end, %fs:0).
The same situation can be observed for x86 (probably others too, not sure) with corresponding for that target relocations: @tlsgd, @gotntpoff.
Differential revision: http://reviews.llvm.org/D15105
llvm-svn: 254443
Fix was:
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
=>
uint32_t getLocalTlsIndexVA() { return Base::getVA() + LocalTlsIndexOff; }
Both works for my MSVS.
Original commit message:
[ELF] - Refactor of tls_index implementation for tls local dynamic model.
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254433
It failed buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/3782/steps/build/logs/stdio
Target.cpp
In file included from /home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/Target.cpp:20:
/home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/OutputSections.h:136:42: error: use of undeclared identifier 'getVA'
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
llvm-svn: 254432
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254428
Implements @tlsld (LD to LE) and @tlsgd (GD to LE) optimizations.
Patch does not implement the GD->IE case for @tlsgd.
Differential revision: http://reviews.llvm.org/D14870
llvm-svn: 254101
This patch implements next relocations:
R_386_TLS_LE - Negative offset relative to static TLS (GNU version).
R_386_TLS_LE_32 - Offset relative to static TLS block.
These ones are created when using next code sequences:
* @tpoff - The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
* @ntpoff Calculate the negative offset of the variable it is added to relative to the static TLS block.
The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
Information was found in Ulrich Drepper, ELF Handling For Thread-Local Storage, http://www.akkadia.org/drepper/tls.pdf, (6.2, p76)
Differential revision: http://reviews.llvm.org/D14930
llvm-svn: 254090
https://docs.oracle.com/cd/E19683-01/817-3677/chapter6-26/index.html says:
R_386_GOTPC
Resembles R_386_PC32, except that it uses the address of the global offset table in its calculation. The symbol referenced in this relocation normally is _GLOBAL_OFFSET_TABLE_, which also instructs the link-editor to create the global offset table.
Currently _GLOBAL_OFFSET_TABLE_ has value == zero. And we use GOT address to calculate the relocation. This patch does not changes that. It just removes the method which is used only for x86. So it is close to non functional change.
Differential revision: http://reviews.llvm.org/D14993
llvm-svn: 254088
R_X86_64_GOTTPOFF is not always requires GOT entries. Some relocations can be converted to local ones.
Differential revision: http://reviews.llvm.org/D14713
llvm-svn: 253966
With these relocations, it is now possible to build a simple "hello world"
program for AArch64 Debian.
Differential revision: http://reviews.llvm.org/D14917
llvm-svn: 253957
This adds support for:
* Uniquing CIEs
* Dropping FDEs that point to dropped sections
It drops 657 488 bytes from the .eh_frame of a Release+Asserts clang.
The link time impact is smallish. Linking clang with a Release+Asserts
lld goes from 0.488064805 seconds to 0.504763060 seconds (1.034 X slower).
llvm-svn: 252790
leaq symbol@tlsld(%rip), %rdi
call __tls_get_addr@plt
symbol@tlsld (R_X86_64_TLSLD) instructs the linker to generate a tls_index entry (two GOT slots) in the GOT for the entire module (shared object or executable) with an offset of 0. The symbol for this GOT entry doesn't matter (as long as it's either local to the module or null), and gold doesn't put a symbol in the dynamic R_X86_64_DTPMOD64 relocation for the GOT entry.
All other platforms defined in http://www.akkadia.org/drepper/tls.pdf except for Itanium use a similar model where global and local dynamic GOT entries take up 2 contiguous GOT slots, so we can handle this in a unified manner if we don't care about Itanium.
While scanning relocations we need to identify local dynamic relocations and generate a single tls_index entry in the GOT for the module and store the address of it somewhere so we can later statically resolve the offset for R_X86_64_TLSLD relocations. We also need to generate a R_X86_64_DTPMOD64 relocation in the RelaDyn relocation section.
This implementation is a bit hacky. It side steps the issue of GotSection and RelocationSection only handling SymbolBody entries by relying on a specific relocation type. The alternative to this seemed to be completely rewriting how GotSection and RelocationSection work, or using a different hacky signaling method.
llvm-svn: 252682
George Rimar