I thought for a while about how to remove it, but it looks like we
can just copy the file for now. Of course I'm not happy about that,
but it's just less than 50 lines of code, and we already have
duplicate code in Error.h and some other places. I want to solve
them all at once later.
Differential Revision: https://reviews.llvm.org/D27819
llvm-svn: 290062
The .ARM.exidx table has an entry for each function with the first entry
giving the start address of the function, the table is sorted in ascending
order of function address. Given a PC value, the unwinder will search the
table for the entry that contains the PC value.
If the table entry happens to be the last, the range of the addresses that
the final unwinding table describes will extend to the end of the address
space. To prevent an incorrect address outside the address range of the
program matching the last entry we follow ld.bfd's example and add a
sentinel EXIDX_CANTUNWIND entry at the end of the table. This gives the
final real table entry an upper bound.
In addition the llvm libunwind unwinder currently depends on the presence
of a sentinel entry (PR31091).
Differential revision: https://reviews.llvm.org/D26977
llvm-svn: 287869
MergeOutputSection class was a bit hard to use because it provdes
a series of finalize functions that have to be called in a right way
at a right time. It also intereacted with MergeInputSection, and the
logic was somewhat entangled between the two classes.
This patch simplifies it by providing only one finalize function.
Now, all you have to do is to call MergeOutputSection::finalize
when you have added all sections to the output section. Then, it
internally merges strings and initliazes StringPiece objects.
I think this is much easier to understand.
This patch also adds comments.
llvm-svn: 287314
Since the output has a section table too, it is meaningful to compute
the sh_link. In a more practical note, the binutils' strip crashes if
sh_link is not set for SHT_ARM_EXIDX.
llvm-svn: 287280
This patch introduces the following changes:
- DynamicSection now inherits InputSection<ELFT> and was moved
to SyntheticSections.h/.cpp.
- Link and Entsize fields of DynamicSection are propagated to
its output section
- In<ELFT>::SyntheticSections was removed.
- Finalization of synthetic sections was removed from
OutputSection<ELFT>::finalize. Now finalizeSyntheticSections is
used instead.
Differential revision: https://reviews.llvm.org/D26603
llvm-svn: 286950
Relocations are the last thing that we wore storing a raw section
pointer to and parsing on demand.
With this patch we parse it only once and store a pointer to the
actual data.
The patch also changes where we store it. It is now in
InputSectionBase. Not all sections have relocations, but most do and
this simplifies the logic. It also means that we now only support one
relocation section per section. Given that that constraint is
maintained even with -r with gold bfd and lld, I think it is OK.
llvm-svn: 286459
Patch allows to pass a symbols file to linker.
LLD will map symbols to sections and sort sections
in output according to symbol ordering file.
That can help to reduce the startup time and/or
amount of pagefaults during startup.
Also, interesting benchmark result was produced by Rafael Espíndola.
After applying the symbols file for clang he timed compiling
X86MCTargetDesc.ii to an object file.
The page faults went from just
56,988 to 56,946 since most faults are not in the binary.
Running time went from 4.403053515 to 4.178112244.
The speedup seems to be because of better cache
locality.
Differential revision: https://reviews.llvm.org/D26130
llvm-svn: 286440
The disadvantage is that we use uint64_t instad of uint32_t for some
value in 32 bit files. The advantage is a substantially simpler code,
faster builds and less code duplication.
llvm-svn: 286414
Previously, we have both input and output section for .MIPS.abiflags.
Now we have only one class for .MIPS.abiflags, which is MipsAbiFlagsSection.
This class is a synthetic input section.
.MIPS.abiflags sections are handled as regular sections until
the control reaches Writer. Writer then aggregates all sections
whose type is SHT_MIPS_ABIFLAGS to create a single synthesized
input section. The synthesized section is then processed normally
as if it came from an input file.
llvm-svn: 286398
Previously, we have both input and output sections for .reginfo and
.MIPS.options. Now for each such sections we have one synthetic input
sections: MipsReginfoSection and MipsOptionsSection respectively.
Both sections are handled as regular sections until the control reaches
Writer. Writer then aggregates all sections whose type is SHT_MIPS_REGINFO
or SHT_MIPS_OPTIONS to create a single synthesized input section. In that
moment Writer also save GP0 value to the MipsGp0 field of the corresponding
ObjectFile. This value required for R_MIPS_GPREL16 and R_MIPS_GPREL32
relocations calculation.
Differential revision: https://reviews.llvm.org/D26444
llvm-svn: 286397
This is similar to what was done for InputSection.
With this the various fields are stored in host order and only
converted to target order when writing.
llvm-svn: 286327
A CommonInputSection is a section containing all common symbols.
That was an input section but was abstracted in a different way
than the synthetic input sections because it was written before
the synthetic input section was invented.
This patch rewrites CommonInputSection as a synthetic input section
so that it behaves better with other sections.
llvm-svn: 286053
It turned ou that we actually want to call std::for_each even if
threading is supported. Unless --thread is given, LLD shouldn't use
more than one threads.
llvm-svn: 286004
If multi-threading is disabled, parallel_for_each will automatically
fall back to std::for_each, so we don't have to do that ourselves.
llvm-svn: 285968
Previously, we added strings from DynamicSection::finalize().
It was a bit tricky because finalize() is supposed to fix the final
size of the section, but adding new strings would change the size of
.dynstr section. So there was a dependency between finalize functions
of .dynamic and .dynstr.
However, I noticed that we can elimiante the dependency by simply
add strings early; we don't have to do that in finalize() but can do
from DynamicSection's ctor.
This patch defines a new function, DynamicSection::addEntries, to
add .dynamic entries that doesn't depend on other sections.
llvm-svn: 285784
Instead of storing a pointer, store the members we need.
The reason for doing this is that it makes it far easier to create
synthetic sections. It also avoids reading data from files multiple
times., which might help with cross endian linking and host
architectures with slow unaligned access.
There are obvious compacting opportunities, but this already has mixed
results even on native x86_64 linking.
There is also the possibility of better refactoring the code for
handling common symbols, but this already shows that a custom class is
not necessary.
llvm-svn: 285148
We were fairly inconsistent as to what information should be accessed
with getSectionHdr and what information (like alignment) was stored
elsewhere.
Now all section info has a dedicated getter. The code is also a bit
more compact.
llvm-svn: 285079
When doing a relocatable link the .ARM.exidx sections with the
SHF_LINK_ORDER flag set need to set the sh_link field to the executable
section they describe. We find the appropriate OutputSection by
following the sh_link field of the .ARM.exidx InputSections.
The getOutputSectionName() function rules make sure that when there are
multiple .ARM.exidx InputSections in an OutputSection they all have the
same sh_link field.
Differential revision: https://reviews.llvm.org/D25825
llvm-svn: 284820
Some MIPS relocations used to access GOT entries are able to manipulate
16-bit index. The other ones like R_MIPS_CALL_HI16/LO16 can handle
32-bit indexes. 16-bit relocations are generated by default. The 32-bit
relocations are generated by -mxgot flag passed to compiler. Usually
these relocation are not mixed in the same code but files like crt*.o
contain 16-bit relocations so even if all "user's" code compiled with
-mxgot flag a few 16-bit relocations might come to the linking phase.
Now LLD does not differentiate local GOT entries accessed via a 16-bit
and 32-bit indexes. That might lead to relocation's overflow if 16-bit
entries are allocated to far from the beginning of the GOT.
The patch introduces new "part" of MIPS GOT dedicated to the local GOT
entries accessed by 32-bit relocations. That allows to put local GOT
entries accessed via a 16-bit index first and escape relocation's overflow.
Differential revision: https://reviews.llvm.org/D25833
llvm-svn: 284809
MIPS GOT consists of some parts: local, global, TLS entries. This change
separates calculation of MIPS GOT index and offset of the corresponding
part of the GOT. That makes code a bit clear and allow to extend number
of parts in the future.
llvm-svn: 284750
In this patch partial gdb_index section is created.
For costructing the .gdb_index section 6 steps should be performed (details are in
SplitDebugInfo.cpp file header), this patch do first 3:
Creates proper section header.
Fills list of compilation units.
Types CU list area is not supposed to be supported, so it is ignored and therefore
can be treated as implemented either.
Differential revision: https://reviews.llvm.org/D24706
llvm-svn: 284708
Use size_t instead of ELFT::uint for the string table offset. If the
linker is built 32-bit, it can't write an output file larger than 2GB.
Other code in this area uses size_t as well.
llvm-svn: 284680
Summary:
Reclaiming the name 'CachedHashString' will let us add a type with that
name that owns its value.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25644
llvm-svn: 284434
The .ARM.exidx sections contain a table. Each entry has two fields:
- PREL31 offset to the function the table entry describes
- Action to take, either cantunwind, inline unwind, or PREL31 offset to
.ARM.extab section
The table entries must be sorted in order of the virtual addresses the
first entry of the table describes. Traditionally this is implemented by
the SHF_LINK_ORDER dependency. Instead of implementing this directly we
sort the table entries post relocation.
The .ARM.exidx OutputSection is described by the PT_ARM_EXIDX program
header
Differential revision: https://reviews.llvm.org/D25127
llvm-svn: 283730
This spreads out computing the hash and using it in a hash table. The
speedups are:
firefox
master 6.811232891
patch 6.559280249 1.03841162939x faster
chromium
master 4.369323666
patch 4.33171853 1.00868134338x faster
chromium fast
master 1.856679971
patch 1.850617741 1.00327578725x faster
the gold plugin
master 0.32917962
patch 0.325711944 1.01064645023x faster
clang
master 0.558015452
patch 0.550284165 1.01404962652x faster
llvm-as
master 0.032563515
patch 0.032152077 1.01279662275x faster
the gold plugin fsds
master 0.356221362
patch 0.352772162 1.00977741549x faster
clang fsds
master 0.635096494
patch 0.627249229 1.01251060127x faster
llvm-as fsds
master 0.030183188
patch 0.029889544 1.00982430511x faster
scylla
master 3.071448906
patch 2.938484138 1.04524944215x faster
This seems to be because we don't stall as much. When linking firefox
stalled-cycles-frontend goes from 57.56% to 55.55%.
With -O2 the difference is even more significant since we avoid
recomputing the hash. For firefox we go from 9.990295265 to
9.149627521 seconds (1.09x faster).
llvm-svn: 283367
It is pretty easy to get the data from the InputSection, so we don't
have to store it.
This opens the way for storing the hash instead.
llvm-svn: 283357
Do not merge sections if generating a relocatable object. It makes
the code simpler because we do not need to update relocations addends
to reflect changes introduced by merging. Instead of that we write
such "merge" sections into separate OutputSections and keep SHF_MERGE
/ SHF_STRINGS flags and sh_entsize value to be able to perform merging
later during a final linking.
Differential Revision: http://reviews.llvm.org/D25066
llvm-svn: 283300
LLD does not update relocations addends when generate a relocatable
object. That is why we should not write a non-zero GP0 value into
the .reginfo and .MIPS.options sections. And we should not accept input
object files with non-zero GP0 value because we cannot handle them
properly.
llvm-svn: 282716
In case of linking PIC and non-PIC code together and generation of a
relocatable object, all PIC symbols should have STO_MIPS_PIC flag in the
symbol table of the ouput file.
llvm-svn: 282714
The BYTE, SHORT, LONG, and QUAD commands store one, two, four, and eight bytes (respectively).
After storing the bytes, the location counter is incremented by the number of bytes
stored.
Previously our scripts handles these commands incorrectly. For example:
SECTIONS {
.foo : {
*(.foo.1)
BYTE(0x11)
...
We accepted the script above treating BYTE as input section description.
These commands are used in the wild though.
Differential revision: https://reviews.llvm.org/D24830
llvm-svn: 282429
This is PR30386,
SORT_BY_INIT_PRIORITY is a keyword can be used to sort sections by numerical value of the
GCC init_priority attribute encoded in the section name.
Differential revision: https://reviews.llvm.org/D24611
llvm-svn: 281646
Previously, all input files were owned by the symbol table.
Files were created at various places, such as the Driver, the lazy
symbols, or the bitcode compiler, and the ownership of new files
was transferred to the symbol table using std::unique_ptr.
All input files were then free'd when the symbol table is freed
which is on program exit.
I think we don't have to transfer ownership just to free all
instance at once on exit.
In this patch, all instances are automatically collected to a
vector and freed on exit. In this way, we no longer have to
use std::unique_ptr.
Differential Revision: https://reviews.llvm.org/D24493
llvm-svn: 281425
This simplifies error handling as there is now only one place in the
code that needs to consider the possibility that the name is
corrupted. Before we would do it in every access.
llvm-svn: 280937
This patch allows static linking of TLS code. To do that it fixes
GOT entries initialization.
If TLS-related GOT entry created for a preemptible symbol i.e. has
a corresponding dynamic relocation, leave the entry initialized by zero.
Write down adjusted TLS symbol's values otherwise. For the adjustments
calculation use offsets for thread-local storage.
https://www.linux-mips.org/wiki/NPTL
llvm-svn: 280914
It looks like MIPS dynamic loader does not support RELCOUNT tag.
Both gold/bfd linkers does not emit this tag on MIPS. I will investigate
the problem further but for now it is better to behave like GNU linkers.
llvm-svn: 280630
FreeBSD's libstdc++ build (used on tier-2 architectures) uses GNU ld's
-f <name> option, which sets the DT_AUXILIARY field to the specified name.
Multiple -f options may be specified and the DT_AUXILIARY entries
will be added in the order in which they appear.
Patch implements that option.
Differential revision: https://reviews.llvm.org/D24139
llvm-svn: 280475
The primary use of build-id is in debugging, hence omitting debug
sections when computing it significantly reduces its usability as
changes in debug section content wouldn't alter the build-id.
Differential Revision: https://reviews.llvm.org/D24120
llvm-svn: 280421
Previously we used LayoutInputSection class to correctly assign
symbols defined in linker script. This patch removes it and uses
pointer to preceding input section in SymbolAssignment class instead.
Differential revision: https://reviews.llvm.org/D23661
llvm-svn: 280348
This patch groups relative relocations in a single block
in combrelocs mode and adds DT_RELCOUNT or DT_RELACOUNT
tag to .dynamic section
Differential revision: https://reviews.llvm.org/D23661
llvm-svn: 280210
DiscardPolicy is enum replacing several boolean options.
This approach is not only consistent with what we use for
unresolveds (UnresolvedPolicy), but also should help to solve a problem
of options with opposing meanings, mentioned in PR28843
Differential revision: https://reviews.llvm.org/D23868
llvm-svn: 280209
This is fix for PR28976.
Problem was that in scanRelocs, we computed relocation offset too early
for case when linkerscript was used. Patch fixes the issue
delaying the calculation.
Differential revision: https://reviews.llvm.org/D23655
llvm-svn: 279264
Previously DT_PREINIT_ARRAYSZ, DT_INIT_ARRAYSZ and DT_FINI_ARRAYSZ
were set to zero when lincerscript was used becase sections sizes are
calculated later that were taken.
Patch delays values calculation for these entries. Testcase is provided.
Differential revision: https://reviews.llvm.org/D23663
llvm-svn: 279258
Spec says "A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object".
But we previously converted symbols to STB_LOCAL even when -r was specified.
Broken binary was produced, this is PR28967, patch fixes the issue.
Differential revision: https://reviews.llvm.org/D23514
llvm-svn: 279220
This section supersedes .reginfo and .MIPS.options sections. But for now
we have to support all three sections for ABI transition period.
llvm-svn: 278482
One reason why we are (ab)using OutputSectionFactory class is
because it owns output sections. Technically there's no need
to have it own sections. So, this patch transfers the ownership
to Out<ELFT>.
llvm-svn: 278452
Even if an output is not a dynamic object, the output may have
.{preinit,init,fini} sections. Therefore, managing these sections
as Out<ELFT>::Dynamic's members is not correct.
llvm-svn: 278093
Not all relocations from a .eh_frame that point to an executable
section should be ignored. In particular, the relocation finding the
personality function should not.
This is a reduction from trying to bootstrap a static lld on linux.
llvm-svn: 276329
We will need to do something like this to support range extension
thunks since that process is iterative.
Doing this also has the advantage that when doing the regular
relocation scan the offset in the output section is known and we can
just store that. This reduces the number of times we have to run
getOffset and I think will allow a more specialized .eh_frame
representation.
By itself this is already a performance win.
firefox
master 7.295045737
patch 7.209466989 0.98826892235
chromium
master 4.531254468
patch 4.509221804 0.995137623774
chromium fast
master 1.836928973
patch 1.823805241 0.992855612714
the gold plugin
master 0.379768791
patch 0.380043405 1.00072310839
clang
master 0.642698284
patch 0.642215663 0.999249070657
llvm-as
master 0.036665467
patch 0.036456225 0.994293213284
the gold plugin fsds
master 0.40395817
patch 0.404384555 1.0010555177
clang fsds
master 0.722045545
patch 0.720946135 0.998477367518
llvm-as fsds
master 0.03292646
patch 0.032759965 0.994943428477
scylla
master 3.427376378
patch 3.368316181 0.98276810292
llvm-svn: 276146
This patch simplifies output section management by making
Factory class have ownership of sections that creates.
Differential Revision: https://reviews.llvm.org/D22575
llvm-svn: 276141
In the last patch for --trace-symbol, I introduced a new symbol type
PlaceholderKind and store it to SymVector storage. It made all code
that iterates over SymVector to recognize and skip PlaceholderKind
symbols. I found that that's annoying.
In this patch, I removed PlaceholderKind and stop storing them to SymVector.
Now the information whether a symbol is being watched by --trace-symbol
is stored to the Symtab hash table.
llvm-svn: 275747
--trace-symbol is a command line option to watch a symbol.
Previosly, we looked up a hash table for a new symbol if the
option is given. Any code that looks up a hash table for each
symbol is expensive because the linker handles a lot of symbols.
In our design, we look up a hash table strictly only once
for a symbol, so --trace-symbol was an exception.
This patch improves efficiency of the option by merging the
hash table into the symbol table.
Instead of looking up a separate hash table with a string,
this patch sets `Traced` flag to symbols specified by --trace-symbol.
So, if you insert a symbol and get a symbol with `Traced` flag on,
you know that you need to print out a log message for the symbol.
This is nearly zero cost.
llvm-svn: 275716
Previously, each subclass of SymbolBody had a pointer to a source
file from which it was created. So, there was no single way to get
a source file for a symbol. We had getSourceFile<ELFT>(), but the
function was a bit inconvenient as it's a template.
This patch makes SymbolBody have a pointer to a source file.
If a symbol is not created from a file, the pointer has a nullptr.
llvm-svn: 275701
The identifier `Version` was used too often in the code to handle
symbol versions. The struct that contains version definitions is
named `Version`. Local variables for version ID are named `Version`.
Local varaible for version string are named `Version`.
This patch give them different names.
llvm-svn: 275673
Previously, Verdefs and Verdauxs are separated in the section.
The new layout is easier to write as we do not have to maintain
two pointers and can avoid passing a reference to a pointer.
llvm-svn: 275665
ELF spec says that alignment of 0 is equivalent to 1.
Previously, we arbitrary set to 0 or 1, but always setting to 1
makes our program simpler.
llvm-svn: 275374
Patch by H.J Lu.
For x86-64 psABI, the entry size of .got and .got.plt sections is 8
bytes for both LP64 and ILP32. Add GotEntrySize and GotPltEntrySize
to ELF target instead of using size of ELFT::uint. Now we can generate
a simple working x32 executable.
Differential Revision: http://reviews.llvm.org/D22288
llvm-svn: 275301
Config members are named after corresponding command line options.
This patch renames VAStart ImageBase so that they are in line with
--image-base.
Differential Revision: http://reviews.llvm.org/D22277
llvm-svn: 275298
Since linkerscript should create sections by itself
(if SECTIONS command is present),
then we might want to reuse the OutputSectionFactory (D19976 already do that now),
so this patch moves it out from writer cpp file for that purpose.
Differential revision: http://reviews.llvm.org/D19977
llvm-svn: 275161
The build otherwise fails with:
[ 39%] Building CXX object
tools/lld/ELF/CMakeFiles/lldELF.dir/OutputSections.cpp.o
/export/gnu/import/git/llvm/tools/lld/ELF/OutputSections.cpp: In
member function ‘void
lld:🧝:GnuHashTableSection<ELFT>::addSymbols(std::vector<std::pair<lld:🧝:SymbolBody*,
long unsigned int> >&)’:
/export/gnu/import/git/llvm/tools/lld/ELF/OutputSections.cpp:585:8:
error: inconsistent deduction for ‘auto’: ‘auto’ and then
‘__gnu_cxx::__normal_iterator<std::pair<lld:🧝:SymbolBody*, long
unsigned int>*, std::vector<std::pair<lld:🧝:SymbolBody*, long
unsigned int> > >’
Reported by: H. J. Liu
llvm-svn: 274518
This is PR28358
According to
https://www.akkadia.org/drepper/dsohowto.pdf
"The fourth point, the VERS 1.0 version being referred to in the VERS 2.0 definition, is not really important in symbol versioning. It marks the predecessor relationship of the two versions and it is done to maintain the similar- ities with Solaris’ internal versioning. It does not cause any problem it might in fact be useful to a human reader so predecessors should always be mentioned."
Patch partially reverts 273423 "[ELF] - Implemented version script hierarchies.",
version references are just ignored now.
Differential revision: http://reviews.llvm.org/D21888
llvm-svn: 274345
The patch adds one more partition to the MIPS GOT. This time it is for
TLS related GOT entries. Such entries are located after 'local' and 'global'
ones. We cannot get a final offset for these entries at the time of
creation because we do not know size of 'local' and 'global' partitions.
So we have to adjust the offset later using `getMipsTlsOffset()` method.
All MIPS TLS relocations which need GOT entries operates MIPS style GOT
offset - 'offset from the GOT's beginning' - MipsGPOffset constant. That
is why I add new types of relocation expressions.
One more difference from othe ABIs is that the MIPS ABI does not support
any TLS relocation relaxations. I decided to make a separate function
`handleMipsTlsRelocation` and put MIPS TLS relocation handling code
there. It is similar to `handleTlsRelocation` routine and duplicates its
code. But it allows to make the code cleaner and prevent pollution of
the `handleTlsRelocation` by MIPS 'if' statements.
Differential Revision: http://reviews.llvm.org/D21606
llvm-svn: 273569
Peter Smith found while trying to support thunk creation for ARM that
LLD sometimes creates broken thunks for MIPS. The cause of the bug is
that we assign file offsets to input sections too early. We need to
create all sections and then assign section offsets because appending
thunks changes file offsets for all following sections.
This patch separates the pass to assign file offsets from thunk
creation pass. This effectively reverts r265673.
Differential Revision: http://reviews.llvm.org/D21598
llvm-svn: 273532
Patch implements hierarchies for version scripts.
This allows to handle script files with dependencies, like next one has:
LIBSAMPLE_1.0{
global:
a;
};
LIBSAMPLE_2.0
{
global:
b;
}LIBSAMPLE_1.0;
Differential revision: http://reviews.llvm.org/D21556
llvm-svn: 273423
With fix:
-soname flag was not set in testcase. Hash calculated for base def was different on local
and bot machines because filename fos used for calculating.
Initial commit message:
Patch implements basic support of versioned symbols.
There is no wildcards patterns matching except local: *;
There is no support for hierarchies.
There is no support for symbols overrides (@ vs @@ not handled).
This patch allows programs that using simple scripts to link and run.
Differential revision: http://reviews.llvm.org/D21018
llvm-svn: 273152
Patch implements basic support of versioned symbols.
There is no wildcards patterns matching except local: *;
There is no support for hierarchies.
There is no support for symbols overrides (@ vs @@ not handled).
This patch allows programs that using simple scripts to link and run.
Differential revision: http://reviews.llvm.org/D21018
llvm-svn: 273143
There are two motivations for this patch. The first one is a preparation
for support MIPS TLS relocations. It might sound like a joke but for GOT
entries related to TLS relocations MIPS ABI uses almost regular approach
with creation of dynamic relocations for each GOT enty etc. But we need
to separate these 'regular' TLS related entries from MIPS specific local
and global parts of GOT. ABI declare simple solution - all TLS related
entries allocated at the end of GOT after local/global parts. The second
motivation it to support GOT relocations for non-preemptible symbols
with addends. If we have more than one GOT relocations against symbol S
with different addends we need to create GOT entries for each unique
Symbol/Addend pairs.
So we store all MIPS GOT entries in separate containers. For non-preemptible
symbols we have to maintain two data structures. The first one is MipsLocal
vector. Each entry corresponds to the GOT entry from the 'local' part
of the GOT contains the symbol's address plus addend. The second one
is MipsLocalMap. It is a map from Symbol/Addend pair to the GOT index.
Differential Revision: http://reviews.llvm.org/D21297
llvm-svn: 273127
I think it is me who named these variables, but I always find that
they are slightly confusing because align is a verb.
Adding four letters is worth it.
llvm-svn: 272984
PltZero (or PLT[0]) was an appropriate name for the little code
we have at beginning of the PLT section when we only supported x86
since the code for x86 just fits in the first PLT slot.
It's not the case anymore. The code for ARM64 occupies first two
slots, so PltZero spans PLT[0] and PLT[1], for example.
This patch renames it to avoid confusion.
llvm-svn: 272913
For ARM and MIPS, we don't need to call this function.
This patch passes a symbol instead of a PLT entry address
so that the target handler can call it if necessary.
llvm-svn: 272910
If the symbol is local we don't need to create a R_X86_64_DTPOFF64, we
can just write the correct value in the got.
Should fix pr28018.
llvm-svn: 272205
MergedInputSection::getOffset is the busiest function in LLD if string
merging is enabled and input files have lots of mergeable sections.
It is usually the case when creating executable with debug info,
so it is pretty common.
The reason why it is slow is because it has to do faily complex
computations. For non-mergeable sections, section contents are
contiguous in output, so in order to compute an output offset,
we only have to add the output section's base address to an input
offset. But for mergeable strings, section contents are split for
merging, so they are not contigous. We've got to do some lookups.
We used to do binary search on the list of section pieces.
It is slow because I think it's hostile to branch prediction.
This patch replaces it with hash table lookup. Seems it's working
pretty well. Below is "perf stat -r10" output when linking clang
with debug info. In this case this patch speeds up about 4%.
Before:
6584.153205 task-clock (msec) # 1.001 CPUs utilized ( +- 0.09% )
238 context-switches # 0.036 K/sec ( +- 6.59% )
0 cpu-migrations # 0.000 K/sec ( +- 50.92% )
1,067,675 page-faults # 0.162 M/sec ( +- 0.15% )
18,369,931,470 cycles # 2.790 GHz ( +- 0.09% )
9,640,680,143 stalled-cycles-frontend # 52.48% frontend cycles idle ( +- 0.18% )
<not supported> stalled-cycles-backend
21,206,747,787 instructions # 1.15 insns per cycle
# 0.45 stalled cycles per insn ( +- 0.04% )
3,817,398,032 branches # 579.786 M/sec ( +- 0.04% )
132,787,249 branch-misses # 3.48% of all branches ( +- 0.02% )
6.579106511 seconds time elapsed ( +- 0.09% )
After:
6312.317533 task-clock (msec) # 1.001 CPUs utilized ( +- 0.19% )
221 context-switches # 0.035 K/sec ( +- 4.11% )
1 cpu-migrations # 0.000 K/sec ( +- 45.21% )
1,280,775 page-faults # 0.203 M/sec ( +- 0.37% )
17,611,539,150 cycles # 2.790 GHz ( +- 0.19% )
10,285,148,569 stalled-cycles-frontend # 58.40% frontend cycles idle ( +- 0.30% )
<not supported> stalled-cycles-backend
18,794,779,900 instructions # 1.07 insns per cycle
# 0.55 stalled cycles per insn ( +- 0.03% )
3,287,450,865 branches # 520.799 M/sec ( +- 0.03% )
72,259,605 branch-misses # 2.20% of all branches ( +- 0.01% )
6.307411828 seconds time elapsed ( +- 0.19% )
Differential Revision: http://reviews.llvm.org/D20645
llvm-svn: 270999
MIPS .reginfo and .MIPS.options sections are consumed by the linker, and
the linker produces a single output section. But it is possible that
input files contain section symbol points to the corresponding input
section. In case of generation a relocatable output we need to write
such symbols to the output file.
Fixes bug 27878.
Differential Revision: http://reviews.llvm.org/D20688
llvm-svn: 270910
This patch makes SectionPiece class 8 bytes smaller on platforms
on which pointer size is 8 bytes. Sean suggested in a post commit
review for r270340 that this could make a differentce, and it
actually is. Time to link clang (with debug info) improved from
6.725 seconds to 6.589 seconds or by about 2%.
Differential Revision: http://reviews.llvm.org/D20613
llvm-svn: 270717
Rui Ueyama