a nice and tidy:
%x1 = load i32* %0, align 4
%1 = icmp eq i32 %x1, 1179403647
br i1 %1, label %if.then, label %if.end
instead of doing lots of loads and branches. May the FreeBSD bootloader
long fit in its allocated space.
llvm-svn: 130416
wider load would allow elimination of subsequent loads, and when the wider
load is still a native integer type. This eliminates a ton of loads on
various benchmarks involving struct fields, though it is somewhat hobbled
by clang not being very aggressive about field alignment.
This is yet another step along the way towards resolving PR6627.
llvm-svn: 130390
Modified LinearFunctionTestReplace to push the condition on the dead
list instead of eagerly deleting it. This can cause unnecessary
IV rewrites, which should have no effect on codegen and will not be an
issue once we stop generating canonical IVs.
llvm-svn: 130340
successors) and use inverse depth first search to traverse the BBs. However
that doesn't work when the CFG has infinite loops. Simply do a linear
traversal of all BBs work just fine.
rdar://9344645
llvm-svn: 130324
only check arguments with pointer types. Update the documentation
of IntrReadArgMem reflect this.
While here, add support for TBAA tags on intrinsic calls.
llvm-svn: 130317
more callee-saved registers and introduce copies. Only allows it if scheduling
a node above calls would end up lessen register pressure.
Call operands also has added ABI restrictions for register allocation, so be
extra careful with hoisting them above calls.
rdar://9329627
llvm-svn: 130245
1. Only run the early (in the module pass pipe) instcombine/simplifycfg
if the "unit at a time" passes they are cleaning up after runs.
2. Move the "clean up after the unroller" pass to the very end of the
function-level pass pipeline. Loop unroll uses instsimplify now,
so it doesn't create a ton of trash. Moving instcombine later allows
it to clean up after opportunities are exposed by GVN, DSE, etc.
3. Introduce some phase ordering tests for things that are specifically
intended to be simplified by the full optimizer as a whole.
This resolves PR2338, and is progress towards PR6627, which will be
generating code that looks similar to test2.
llvm-svn: 130241
when X has multiple uses. This is useful for exposing secondary optimizations,
but the X86 backend isn't ready for this when X has a single use. For example,
this can disable load folding.
This is inching towards resolving PR6627.
llvm-svn: 130238
return it as a clobber. This allows GVN to do smart things.
Enhance GVN to be smart about the case when a small load is clobbered
by a larger overlapping load. In this case, forward the value. This
allows us to compile stuff like this:
int test(void *P) {
int tmp = *(unsigned int*)P;
return tmp+*((unsigned char*)P+1);
}
into:
_test: ## @test
movl (%rdi), %ecx
movzbl %ch, %eax
addl %ecx, %eax
ret
which has one load. We already handled the case where the smaller
load was from a must-aliased base pointer.
llvm-svn: 130180
Fixes Thumb2 ADCS and SBCS lowering: <rdar://problem/9275821>.
t2ADCS/t2SBCS are now pseudo instructions, consistent with ARM, so the
assembly printer correctly prints the 's' suffix.
Fixes Thumb2 adde -> SBC matching to check for live/dead carry flags.
Fixes the internal ARM machine opcode mnemonic for ADCS/SBCS.
Fixes ARM SBC lowering to check for live carry (potential bug).
llvm-svn: 130048
fix bugs exposed by the gcc dejagnu testsuite:
1. The load may actually be used by a dead instruction, which
would cause an assert.
2. The load may not be used by the current chain of instructions,
and we could move it past a side-effecting instruction. Change
how we process uses to define the problem away.
llvm-svn: 130018
On x86 this allows to fold a load into the cmp, greatly reducing register pressure.
movzbl (%rdi), %eax
cmpl $47, %eax
->
cmpb $47, (%rdi)
This shaves 8k off gcc.o on i386. I'll leave applying the patch in README.txt to Chris :)
llvm-svn: 130005
This tends to happen a lot with bitfield code generated by clang. A simple example for x86_64 is
uint64_t foo(uint64_t x) { return (x&1) << 42; }
which used to compile into bloated code:
shlq $42, %rdi ## encoding: [0x48,0xc1,0xe7,0x2a]
movabsq $4398046511104, %rax ## encoding: [0x48,0xb8,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00]
andq %rdi, %rax ## encoding: [0x48,0x21,0xf8]
ret ## encoding: [0xc3]
with this patch we can fold the immediate into the and:
andq $1, %rdi ## encoding: [0x48,0x83,0xe7,0x01]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
shlq $42, %rax ## encoding: [0x48,0xc1,0xe0,0x2a]
ret ## encoding: [0xc3]
It's possible to save another byte by using 'andl' instead of 'andq' but I currently see no way of doing
that without making this code even more complicated. See the TODOs in the code.
llvm-svn: 129990
add <rd>, sp, #<imm8>
ldr <rd>, [sp, #<imm8>]
When the offset from sp is multiple of 4 and in range of 0-1020.
This saves code size by utilizing 16-bit instructions.
rdar://9321541
llvm-svn: 129971
This patch depends on the prior fix r129908 that changes to use std::find,
rather than std::binary_search, on unordered array.
Patch by Dan Bailey
llvm-svn: 129909
used by Clang. To help Clang integration, the PTX target has been split
into two targets: ptx32 and ptx64, depending on the desired pointer size.
- Add GCCBuiltin class to all intrinsics
- Split PTX target into ptx32 and ptx64
llvm-svn: 129851
manually and pass all (now) 4 arguments to the mul libcall. Add a new
ExpandLibCall for just this (copied gratuitously from type legalization).
Fixes rdar://9292577
llvm-svn: 129842
- As before, there is a minor semantic change here (evidenced by the test
change) for Darwin triples that have no version component. I debated changing
the default behavior of isOSVersionLT, but decided it made more sense for
triples to be explicit.
llvm-svn: 129805
- There is a minor semantic change here (evidenced by the test change) for
Darwin triples that have no version component. I debated changing the default
behavior of isOSVersionLT, but decided it made more sense for triples to be
explicit.
llvm-svn: 129802
Making use of VFP / NEON floating point multiply-accumulate / subtraction is
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Enable these fp vmlx codegen changes for Cortex-A9.
llvm-svn: 129775
Add a avoidWriteAfterWrite() target hook to identify register classes that
suffer from write-after-write hazards. For those register classes, try to avoid
writing the same register in two consecutive instructions.
This is currently disabled by default. We should not spill to avoid hazards!
The command line flag -avoid-waw-hazard can be used to enable waw avoidance.
llvm-svn: 129772
when they are a truncate from something else. This eliminates fully half of all the
fastisel rejections on a test c++ file I'm working with, which should make a substantial
improvement for -O0 compile of c++ code.
This fixed rdar://9297003 - fast isel bails out on all functions taking bools
llvm-svn: 129752
Before we would bail out on i1 arguments all together, now we just bail on
non-constant ones. Also, we used to emit extraneous code. e.g. test12 was:
movb $0, %al
movzbl %al, %edi
callq _test12
and test13 was:
movb $0, %al
xorl %edi, %edi
movb %al, 7(%rsp)
callq _test13f
Now we get:
movl $0, %edi
callq _test12
and:
movl $0, %edi
callq _test13f
llvm-svn: 129751
registers for fast allocation a different way. This has us updating
used registers only when we're using that exact register.
Fixes rdar://9207598
llvm-svn: 129711
value constraints on them (when defined as ImmLeaf's). This is particularly important
for X86-64, where almost all reg/imm instructions take a i64immSExt32 immediate operand,
which has a value constraint. Before this patch we ended up iseling the examples into
such amazing code as:
movabsq $7, %rax
imulq %rax, %rdi
movq %rdi, %rax
ret
now we produce:
imulq $7, %rdi, %rax
ret
This dramatically shrinks the generated code at -O0 on x86-64.
llvm-svn: 129691
2. implement rdar://9289501 - fast isel should fold trivial multiplies to shifts
3. teach tblgen to handle shift immediates that are different sizes than the
shifted operands, eliminating some code from the X86 fast isel backend.
4. Have FastISel::SelectBinaryOp use (the poorly named) FastEmit_ri_ function
instead of FastEmit_ri to simplify code.
llvm-svn: 129666
when we have a global variable base an an index. Instead, just give up on
folding the global variable.
Before we'd geenrate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
leaq (%rax), %rax
addq %rdi, %rax
movzbl (%rax), %eax
ret
now we generate:
_test: ## @test
## BB#0:
movq _rtx_length@GOTPCREL(%rip), %rax
movzbl (%rax,%rdi), %eax
ret
The difference is even more significant when there is a scale
involved.
This fixes rdar://9289558 - total fail with addr mode formation at -O0/x86-64
llvm-svn: 129664
less trivial things) into a dummy lea. Before we generated:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
leaq (%rax), %rax
ret
now we produce:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
ret
This is part of rdar://9289558
llvm-svn: 129662
The basic issue here is that bottom-up isel is matching the branch
and compare, and was failing to fold the load into the branch/compare
combo. Fixing this (by allowing folding into any instruction of a
sequence that is selected) allows us to produce things like:
cmpb $0, 52(%rax)
je LBB4_2
instead of:
movb 52(%rax), %cl
cmpb $0, %cl
je LBB4_2
This makes the generated -O0 code run a bit faster, but also speeds up
compile time by putting less pressure on the register allocator and
generating less code.
This was one of the biggest classes of missing load folding. Implementing
this shrinks 176.gcc's c-decl.s (as a random example) by about 4% in (verbose-asm)
line count.
llvm-svn: 129656
Change ELF systems to use CFI for producing the EH tables. This reduces the
size of the clang binary in Debug builds from 690MB to 679MB.
llvm-svn: 129571
This is done by pushing physical register definitions close to their
use, which happens to handle flag definitions if they're not glued to
the branch. This seems to be generally a good thing though, so I
didn't need to add a target hook yet.
The primary motivation is to generate code closer to what people
expect and rule out missed opportunity from enabling macro-op
fusion. As a side benefit, we get several 2-5% gains on x86
benchmarks. There is one regression:
SingleSource/Benchmarks/Shootout/lists slows down be -10%. But this is
an independent scheduler bug that will be tracked separately.
See rdar://problem/9283108.
Incidentally, pre-RA scheduling is only half the solution. Fixing the
later passes is tracked by:
<rdar://problem/8932804> [pre-RA-sched] on x86, attempt to schedule CMP/TEST adjacent with condition jump
Fixes:
<rdar://problem/9262453> Scheduler unnecessary break of cmp/jump fusion
llvm-svn: 129508
the same allocation size but different primitive sizes(e.g., <3xi32> and
<4xi32>). When ScalarRepl promotes them, it can't use a bit cast but
should use a shuffle vector instead.
llvm-svn: 129472
ignored. There was a test to catch this, but it was just blindly updated in
a large change. This fixes another part of <rdar://problem/9275290>.
llvm-svn: 129466
the max itself, so it is not easy to write a test case for this, but I added a
test case that would fail if the code in AsmPrinter were removed.
llvm-svn: 129432
Additional fixes:
Do something reasonable for subtargets with generic
itineraries by handle node latency the same as for an empty
itinerary. Now nodes default to unit latency unless an itinerary
explicitly specifies a zero cycle stage or it is a TokenFactor chain.
Original fixes:
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make the ndoe latency adjustments work, I also
needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129421
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
llvm-svn: 129401
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make these heuristic adjustments to node latency work,
I also needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129383
reassociation opportunities are exposed. This fixes a bug where
the nested reassociation expects to be the IR to be consistent,
but it isn't, because the outer reassociation has disconnected
some of the operands. rdar://9167457
llvm-svn: 129324
--- Reverse-merging r129235 into '.':
D test/Feature/bb_attrs.ll
U include/llvm/BasicBlock.h
U include/llvm/Bitcode/LLVMBitCodes.h
U lib/VMCore/AsmWriter.cpp
U lib/VMCore/BasicBlock.cpp
U lib/AsmParser/LLParser.cpp
U lib/AsmParser/LLLexer.cpp
U lib/AsmParser/LLToken.h
U lib/Bitcode/Reader/BitcodeReader.cpp
U lib/Bitcode/Writer/BitcodeWriter.cpp
llvm-svn: 129259
* Add a "landing pad" attribute to the BasicBlock.
* Modify the bitcode reader and writer to handle said attribute.
Later: The verifier will ensure that the landing pad attribute is used in the
appropriate manner. I.e., not applied to the entry block, and applied only to
basic blocks that are branched to via a `dispatch' instruction.
(This is a work-in-progress.)
llvm-svn: 129235
If lower bound is more then upper bound then consider it is an unbounded array.
An array is unbounded if non-zero lower bound is same as upper bound.
If lower bound and upper bound are zero than array has one element.
llvm-svn: 129156
induction variable. The preRA scheduler is unaware of induction vars,
so we look for potential "virtual register cycles" instead.
Fixes <rdar://problem/8946719> Bad scheduling prevents coalescing
llvm-svn: 129100
is equivalent to any other relevant value; it isn't true in general.
If it is equivalent, the LoopPromoter will tell the AST the equivalence.
Also, delete the PreheaderLoad if it is unused.
Chris, since you were the last one to make major changes here, can you check
that this is sane?
llvm-svn: 129049
Since these "Advanced SIMD and VFP" instructions have more specfic encoding bits
specified, if coproc == 10 or 11, we should reject the insn as invalid.
rdar://problem/9239922
rdar://problem/9239596
llvm-svn: 129027
Add more complete sanity check for LdStFrm instructions where if IBit (Inst{25})
is 1, Inst{4} should be 0. Otherwise, we should reject the insn as invalid.
rdar://problem/9239347
rdar://problem/9239467
llvm-svn: 128977
Qd -> bit[12] == 0
Qn -> bit[16] == 0
Qm -> bit[0] == 0
If one of these bits is 1, the instruction is UNDEFINED.
rdar://problem/9238399
rdar://problem/9238445
llvm-svn: 128949
For register-controlled shifts, we should check that the encoding constraint
Inst{7} = 0 and Inst{4} = 1 is satisfied.
rdar://problem/9237693
llvm-svn: 128941
An alternative syntax is available for a modified immediate constant that permits the programmer to specify
the encoding directly. In this syntax, #<const> is instead written as #<byte>,#<rot>, where:
<byte> is the numeric value of abcdefgh, in the range 0-255
<rot> is twice the numeric value of rotation, an even number in the range 0-30.
llvm-svn: 128897
There can be multiple defs for a single virtual register when they are defining
sub-registers.
The missing <dead> flag was stopping the inline spiller from eliminating dead
code after rematerialization.
llvm-svn: 128888
space info. We crash with an assert in this case. This change checks that the
address space of the bitcasted pointer is the same as the gep ptr.
llvm-svn: 128884
When a virtual register has a single value that is defined as a copy of a
reserved register, permit that copy to be joined. These virtual register are
usually copies of the stack pointer:
%vreg75<def> = COPY %ESP; GR32:%vreg75
MOV32mr %vreg75, 1, %noreg, 0, %noreg, %vreg74<kill>
MOV32mi %vreg75, 1, %noreg, 8, %noreg, 0
MOV32mi %vreg75<kill>, 1, %noreg, 4, %noreg, 0
CALLpcrel32 ...
Coalescing these virtual registers early decreases register pressure.
Previously, they were coalesced by RALinScan::attemptTrivialCoalescing after
register allocation was completed.
The lower register pressure causes the mcinst-lowering-cmp0.ll test case to fail
because it depends on linear scan spilling a particular register.
I am deleting 2008-08-05-SpillerBug.ll because it is counting the number of
instructions emitted, and its revision history shows the 'correct' count being
edited many times.
llvm-svn: 128845
The code inserted by PPCTargetLowering::EmitInstrWithCustomInserter for ppc64 is
wrong, and I don't know how to fix it. It seems to be using the correct register
classes for pointers, but it inserts all 32-bit instructions.
llvm-svn: 128835
also fix the encoding of the later.
- Add a new encoding bit to describe the index mode used in AM3.
- Teach printAddrMode3Operand to check by the addressing mode which
index mode to print.
- Testcases.
llvm-svn: 128832
after the given instruction; make sure to handle that case correctly.
(It's difficult to trigger; the included testcase involves a dead
block, but I don't think that's a requirement.)
While I'm here, get rid of the unnecessary warning about
SimplifyInstructionsInBlock, since it should work correctly as far as I know.
llvm-svn: 128782
registers that arise from argument shuffling with the soft float ABI. These
instructions are particularly slow on Cortex A8. This fixes one half of
<rdar://problem/8674845>.
llvm-svn: 128759
all LDR/STR changes and left them to a future patch. Passing all
checks now.
- Implement asm parsing support for LDRT, LDRBT, STRT, STRBT and
fix the encoding wherever is possible.
- Add a new encoding bit to describe the index mode used and teach
printAddrMode2Operand to check by the addressing mode which index
mode to print.
- Testcases
llvm-svn: 128689
This way, shrinkToUses() will ignore the instruction that is about to be
deleted, and we avoid leaving invalid live ranges that SplitKit doesn't like.
Fix a misunderstanding in MachineVerifier about <def,undef> operands. The
<undef> flag is valid on def operands where it has the same meaning as <undef>
on a use operand. It only applies to sub-register defines which also read the
full register.
llvm-svn: 128642
- Implement asm parsing support for LDRT, LDRBT, STRT, STRBT and
{STR,LDC}{2}_{PRE,POST} fixing the encoding wherever is possible.
- Move all instructions which use am2offset without a pattern to use
addrmode2.
- Add a new encoding bit to describe the index mode used and teach
printAddrMode2Operand to check by the addressing mode which index
mode to print.
- Testcases
llvm-svn: 128632
The rematerialized instruction may require a more constrained register class
than the register being spilled. In the test case, the spilled register has been
inflated to the DPR register class, but we are rematerializing a load of the
ssub_0 sub-register which only exists for DPR_VFP2 registers.
The register class is reinflated after spilling, so the conservative choice is
only temporary.
llvm-svn: 128610
{STR,LDC}{2}_PRE.
- Fixed the encoding in some places.
- Some of those instructions were using am2offset and now use addrmode2.
Codegen isn't affected, instructions which use SelectAddrMode2Offset were not
touched.
- Teach printAddrMode2Operand to check by the addressing mode which index
mode to print.
- This is a work in progress, more work to come. The idea is to change places
which use am2offset to use addrmode2 instead, as to unify assembly parser.
- Add testcases for assembly parser
llvm-svn: 128585
that one of the numbers is signed while the other is unsigned. This could lead
to a wrong result when the signed was promoted to an unsigned int.
* Add the data layout line to the testcase so that it will test the appropriate
thing.
Patch by David Terei!
llvm-svn: 128577
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
llvm-svn: 128502
isel lowering to fold the zero-extend's and take advantage of no-stall
back to back vmul + vmla:
vmull q0, d4, d6
vmlal q0, d5, d6
is faster than
vaddl q0, d4, d5
vmovl q1, d6
vmul q0, q0, q1
This allows us to vmull + vmlal for:
f = vmull_u8( vget_high_u8(s), c);
f = vmlal_u8(f, vget_low_u8(s), c);
rdar://9197392
llvm-svn: 128444
removes one use of X which helps it pass the many hasOneUse() checks.
In my analysis, this turns up very often where X = A >>exact B and that can't be
simplified unless X has one use (except by increasing the lifetime of A which is
generally a performance loss).
llvm-svn: 128373
Correctly terminate the range of register DBG_VALUEs when the register is
clobbered or when the basic block ends.
The code is now ready to deal with variables that are sometimes in a register
and sometimes on the stack. We just need to teach emitDebugLoc to say 'stack
slot'.
llvm-svn: 128327
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
llvm-svn: 128320
The .dot directives don't need labels, that is a leftover from when we created
line number info manually.
Instructions following a DBG_VALUE can share its label since the DBG_VALUE
doesn't produce any code.
llvm-svn: 128284
According to A8.6.189 STM/STMIA/STMEA (Encoding T1), there's only tSTMIA_UPD available.
Ignore tSTMIA for the decoder emitter and add a test case for that.
llvm-svn: 128246
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add a test case.
llvm-svn: 128240
Set the encoding bits to {0,?,?,0}, not 0. Plus delegate the disassembly of ADR to
the more generic ADDri/SUBri instructions, and add a test case for that.
llvm-svn: 128234
These instructions were changed to not embed the addressing mode within the MC instructions
We also need to update the corresponding assert stmt. Also add two test cases.
llvm-svn: 128191
were incomplete. The assert stmt needs to be updated and the operand index incrment is wrong.
Fix the bad logic and add some sanity checking to detect bad instruction encoding;
and add a test case.
llvm-svn: 128186
int tries = INT_MAX;
while (tries > 0) {
tries--;
}
The check should be:
subs r4, #1
cmp r4, #0
bgt LBB0_1
The subs can set the overflow V bit when r4 is INT_MAX+1 (which loop
canonicalization apparently does in this case). cmp #0 would have cleared
it while not changing the N and Z bits. Since BGT is dependent on the V
bit, i.e. (N == V) && !Z, it is not safe to eliminate the cmp #0.
rdar://9172742
llvm-svn: 128179
This will extend the ranges of debug info variables in registers until they are
clobbered.
Fix 1: Don't mistake DBG_VALUE instructions referring to incoming arguments on
the stack with DBG_VALUE instructions referring to variables in the frame
pointer. This fixes the gdb test-suite failure.
Fix 2: Don't trace through copies to physical registers setting up call
arguments. These registers are call clobbered, and the source register is more
likely to be a callee-saved register that can be extended through the call
instruction.
llvm-svn: 128114
VFP Load/Store Multiple Instructions used to embed the IA/DB addressing mode within the
MC instruction; that has been changed so that now, for example, VSTMDDB_UPD and VSTMDIA_UPD
are two instructions. Update the ARMDisassemblerCore.cpp's DisassembleVFPLdStMulFrm()
to reflect the change.
Also add a test case.
llvm-svn: 128103
These ranges get completely jumbled by the post-ra scheduler, and it is not
really reasonable to expect it to make sense of them.
Instead, teach DwarfDebug to notice when user variables in registers are
clobbered, and terminate the ranges there.
llvm-svn: 128045
Chris Lattner