We don't need to return a MachineInstr* from these stack probe insertion
calls anyway. If we ever need to add it back, we can return an iterator
instead.
Based on a patch by David Kreitzer
This bug is a consequence of
r279314 | dexonsmith | 2016-08-19 13:40:12 -0700 (Fri, 19 Aug 2016) | 110 lines
We hit the "Assertion `!NodePtr->isKnownSentinel()' failed" assertion,
but only when inserting a stack probe call at the end of an MBB, which
isn't necessarily a common situation.
Differential Revision: https://reviews.llvm.org/D25566
llvm-svn: 284130
This patch assigns cost of the scaling used in addressing.
On many ARM cores, a negated register offset takes longer than a
non-negated register offset, in a register-offset addressing mode.
For instance:
LDR R0, [R1, R2 LSL #2]
LDR R0, [R1, -R2 LSL #2]
Above, (1) takes less cycles than (2).
By assigning appropriate scaling factor cost, we enable the LLVM
to make the right trade-offs in the optimization and code-selection phase.
Differential Revision: http://reviews.llvm.org/D24857
Reviewers: jmolloy, rengolin
llvm-svn: 284127
Because everything live is spilled at the end of a
block by fast regalloc, assume this will happen and
avoid the copies of the resource descriptor.
llvm-svn: 284119
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
The Register Calling Convention (RegCall) was introduced by Intel to optimize parameter transfer on function call.
This calling convention ensures that as many values as possible are passed or returned in registers.
This commit presents the basic additions to LLVM CodeGen in order to support RegCall in X86.
Differential Revision: http://reviews.llvm.org/D25022
llvm-svn: 284108
We don't need to check if AVX is enabled. It's implied by the operation action being set to Custom.
We don't need to check both the input and output type widths. We only need to check the type that's being inserted or extracted. The other type is known to be a legal type and we can assume its a different width.
llvm-svn: 284102
This allows RegBankSelect in greedy mode to get rid some of the cross
register bank copies when loads are involved in the chain of
computation.
llvm-svn: 284097
- Use storage class C_STAT for 'PrivateLinkage' The storage class for
PrivateLinkage should equal to the Internal Linkage.
- Set 'PrivateGlobalPrefix' from "L" to ".L" for MM_WinCOFF (includes
x86_64) MM_WinCOFF has empty GlobalPrefix '\0' so PrivateGlobalPrefix
"L" may conflict to the normal symbol name starting with 'L'.
Based on a patch by Han Sangjin! Manually updated test cases.
llvm-svn: 284096
Summary: We need a new LLVM intrinsic to implement MS _AddressOfReturnAddress builtin on 64-bit Windows.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25293
llvm-svn: 284061
This is the most basic handling of the indirect access
pseudos using GPR indexing mode. This currently only enables
the mode for a single v_mov_b32 and then disables it.
This is much more complicated to use than the movrel instructions,
so a new optimization pass is probably needed to fold the access
into the uses and keep the mode enabled for them.
llvm-svn: 284031
The current Cost Model implementation is very inaccurate and has to be
updated, improved, re-implemented to be able to take into account the
concrete CPU models and the concrete targets where this Cost Model is
being used. For example, the Latency Cost Model should be differ from
Code Size Cost Model, etc.
This patch is the first step to launch the developing and implementation
of a new Cost Model generation.
Differential Revision: https://reviews.llvm.org/D25186
llvm-svn: 284012
Although Copies are not specific to preISel, we still have to assign them
a proper register class. However, given they are not constrained to
anything we do not have to handle the source register at the copy. It
will be properly mapped when reaching the related definition.
In the process, the handlong of G_ANYEXT is slightly modified as those
end up being selected as copy. The difference is that when register size
do not match on both sides, we need to insert SUBREG_TO_REG operation,
otherwise the post RA copy expansion will not be happy!
llvm-svn: 283972
Summary:
In PPCMIPeephole, when we see two splat instructions, we can't simply do the following transformation:
B = Splat A
C = Splat B
=>
C = Splat A
because B may still be used between these two instructions. Instead, we should make the second Splat a PPC::COPY and let later passes decide whether to remove it or not:
B = Splat A
C = Splat B
=>
B = Splat A
C = COPY B
Fixes PR30663.
Reviewers: echristo, iteratee, kbarton, nemanjai
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25493
llvm-svn: 283961
Reverts r283938 to reinstate r283867 with a fix.
The original change had an ArrayRef referring to a destroyed temporary
initializer list. Use plain C arrays instead.
llvm-svn: 283942
- Refactor bit packing/unpacking
- Calculate bit mask given bit shift and bit width
- Introduce function for decoding bits of waitcnt
- Introduce function for encoding bits of waitcnt
- Introduce function for getting waitcnt mask (instead of using bare numbers)
- Introduce function fot getting max waitcnt(s) (instead of using bare numbers)
Differential Revision: https://reviews.llvm.org/D25298
llvm-svn: 283919
I fixed all the other Targets in r283702, and interestingly the
sanitizers are only now "sometimes" catching this bug on the only
one I missed.
llvm-svn: 283914
The high registers are not allocatable in Thumb1 functions, but they
could still be used by inline assembly, so we need to save and restore
the callee-saved high registers (r8-r11) in the prologue and epilogue.
This is complicated by the fact that the Thumb1 push and pop
instructions cannot access these registers. Therefore, we have to move
them down into low registers before pushing, and move them back after
popping into low registers.
In most functions, we will have low registers that are also being
pushed/popped, which we can use as the temporary registers for
saving/restoring the high registers. However, this is not guaranteed, so
we may need to push some extra low registers to ensure that the high
registers can be saved/restored. For correctness, it would be sufficient
to use just one low register, but if we have enough low registers
available then we only need one push/pop instruction, rather than one
per high register.
We can also use the argument/return registers when they are not live,
and the link register when saving (but not restoring), reducing the
number of extra registers we need to push.
There are still a few extreme edge cases where we need two push/pop
instructions, because not enough low registers can be made live in the
prologue or epilogue.
In addition to the regression tests included here, I've also tested this
using a script to generate functions which clobber different
combinations of registers, have different numbers of argument and return
registers (including variadic arguments), allocate different fixed sized
objects on the stack, and do or don't use variable sized allocas and the
__builtin_return_address intrinsic (all of which affect the available
registers in the prologue and epilogue). I ran these functions in a test
harness which verifies that all of the callee-saved registers are
correctly preserved.
Differential Revision: https://reviews.llvm.org/D24228
llvm-svn: 283867
Currently, the Int_eh_sjlj_dispatchsetup intrinsic is marked as
clobbering all registers, including floating-point registers that may
not be present on the target. This is technically true, as we could get
linked against code that does use the FP registers, but that will not
actually work, as the soft-float code cannot save and restore the FP
registers. SjLj exception handling can only work correctly if either all
or none of the code is built for a target with FP registers. Therefore,
we can assume that, when Int_eh_sjlj_dispatchsetup is compiled for a
soft-float target, it is only going to be linked against other
soft-float code, and so only clobbers the general-purpose registers.
This allows us to check that no non-savable registers are clobbered when
generating the prologue/epilogue.
Differential Revision: https://reviews.llvm.org/D25180
llvm-svn: 283866
Allow instructions such as 'cmp w0, #(end - start)' by folding the
expression into a constant. For ELF, we fold only if the symbols are in
the same section. For MachO, we fold if the expression contains only
symbols that are not linker visible.
Fixes https://llvm.org/bugs/show_bug.cgi?id=18920
Differential Revision: https://reviews.llvm.org/D23834
llvm-svn: 283862
This only adds the support for 64-bit vector OR. Adding more sizes is
not difficult, but it requires a bigger refactoring because ORs work on
any size, not necessarly the ones that match the width of the register
width. Right now, this is not expressed in the legalization, so don't
bother pushing the refactoring yet.
llvm-svn: 283831
Quentin Colombet