A WRITE to an unformatted sequential variable-length unit after
a BACKSPACE needs to forget its previous knowledge of the length
of the record that's about to be overwritten, and a BACKSPACE
after an ENDFILE or at the start of the file needs to be a no-op.
Differential revision: https://reviews.llvm.org/D88675
Don't give false positives from INQUIRE about possible
access mode changes on connected units. DIRECT and SEQUENTIAL
cannot be intermixed, apart from allowing DIRECT on a SEQUENTIAL
file with fixed-size records and positioning. Nor can
FORMATTED and UNFORMATTED be interchanged. On unconnected
files, the best that we can do is "UNKNOWN".
Differential revision: https://reviews.llvm.org/D88673
Add checking to I/O statement APIs to catch cases where the formatted
I/O data item transfer routines like OutputInteger64 are being
incorrectly used for unformatted I/O, which should use the
unformatted block or descriptor-based data item interfaces.
Differential revision: https://reviews.llvm.org/D88672
This resolves an issue where the Microsoft compiler 'forgets' symbols when using constexpr in a lambda in a templated function. The symbols are:
1. The implicit lambda captures `context` and `convert`. Fix by making them explicit captures. The error message was:
```
fold-implementation.h(1220): error C2065: 'convert': undeclared identifier
```
2. The function template argument FROMCAT. Fix by storing it in a temporary constexpr variable inside the function. The error message was:
```
fold-implementation.h(1216): error C2065: 'FROMCAT': undeclared identifier
```
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D88504
Msvc reports the following error when a ReferenceVariantBase is constructed using an r-value reference or instantiated as std::vector template parameter. The error message is:
```
PFTBuilder.h(59,1): error C2665: 'std::variant<...>::variant': none of the 2 overloads could convert all the argument types
variant(1248,1): message : could be 'std::variant<...>::variant(std::variant<...> &&) noexcept(false)'
variant(1248,1): message : or 'std::variant<...>::variant(const std::variant<...> &) noexcept(false)'
PFTBuilder.h(59,1): message : while trying to match the argument list '(common::Reference<lower::pft::ReferenceVariantBase<false,...>>)'
```
Work around the ambiguity by only taking `common::Reference` arguments in the constructor. That is, conversion to common::Reference has to be done be the caller instead of being done inside the ctor. Unfortunately, with this change clang/gcc (but not msvc) insist on that the ReferenceVariantBase is stored in a `std::initializer_list`-initialized variable before being used, like being passed to a function or returned.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D88109
The estimation of the decimal exponent needs to allow for all
'd' of the requested significant digits.
Also accept a plus sign on a "+kP" scaling factor in a format.
Differential revision: https://reviews.llvm.org/D88618
The '/' control edit descriptor causes a runtime crash for an
external formatted sequential READ because the AdvanceRecord()
member function for external units implemented only the tasks
to finish reading the current record. Split those out into
a new FinishReadingRecord() member function, call that instead
from EndIoStatement(), and change AdvanceRecord() to both
finish reading the current record and to begin reading the next
one.
Differential revision: https://reviews.llvm.org/D88607
Represent FINAL subroutines in the symbol table entries of
derived types. Enforce constraints. Update tests that have
inadvertent violations or modified messages. Added a test.
The specific procedure distinguishability checking code for generics
was used to enforce distinguishability of FINAL procedures.
(Also cleaned up some confusion and redundancy noticed in the
type compatibility infrastructure while digging into that area.)
Differential revision: https://reviews.llvm.org/D88613
These types have to distinguish list-directed I/O from formatted I/O,
and the subscript incrementation call was in the formatted branch
of the if() rather than after the if().
Differential revision: https://reviews.llvm.org/D88606
The custom implementation of UnsignedInt128 has an implicit conversion operator to unit64_t, but not int64_t. Considering that the former is already truncating, and C++ implicitly converts uint64_t to int64_t, UnsignedInt128 should also support an implicit conversion to int64_t. An analogous conversion would be from uint32_t to int16_t.
Without the conversion operator overload, the msvc emits the following error:
```
descriptor-io.h(44): error C2440: 'static_cast': cannot convert from 'A' to 'int64_t'
with
[
A=Fortran::common::uint128_t
]
```
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D88509
The Microsoft compiler emits an error when populating the vector with a single element of a templated argument using the brace syntax. The error is:
```
constant.h(102,1): error C2664: 'std::vector<Fortran::evaluate::value::Complex<...>, ...>::vector(std::initializer_list<_Ty>,const _Alloc &)': cannot convert argument 1 from 'initializer list' to 'std::initializer_list<_Ty>'
```
To work around this error, we replace the templated constructor with one for the expected type. Conversion to the element type has to be done by the caller.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D88163
SAVE statement, according to 8.6.14, must apply to the same scoping
unit, that excludes nested scoping units. For example, if the SAVE
statement is found in a MODULE, the functions contained in that module
should not inherit the SAVE attribute. I think that the code was doing
this, failing the following source:
```
MODULE pippo
SAVE
CONTAINS
PURE FUNCTION fft_stick_index( )
IMPLICIT NONE
INTEGER :: fft_stick_index
INTEGER :: mc !error: A pure subprogram may not have a variable with the SAVE attribute
END FUNCTION
END MODULE
```
Differential Revision: https://reviews.llvm.org/D88279
After skeleton of the `Parallel Op` is created set the insertion point to start of the block. So that later `CodeGen` can proceed.
Note: This patch reflects the work that can be upstreamed from PR(merged)
PR: https://github.com/flang-compiler/f18-llvm-project/pull/424
Reviewed By: schweitz, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D88221
`FlangFrontendTests` depends on libclangFrontend (it uses
DiagnosticConsumer classes from there). This patch adds the missing
dependency in CMake.
The missing dependency manifests itself only with BUILD_SHARED_LIBS=ON.
This symbol is linked in statically with libflangFrontend when
BUILD_SHARED_LIBS=OFF.
`flang-new` depends on libclangFrontend (it uses DiagnosticConsumer
classes from there). This patch adds the missing dependency in CMake.
clang::TextDiagnosticBuffer is only reported as missing when compiling
`flang-new` with BUILD_SHARED_LIBS=ON. This symbol is linked in
statically with libflangFrontend when BUILD_SHARED_LIBS=OFF.
1. Section 2.5 : Parallel Construct
2. Section 2.7.1 : Loop Construct
3. Section 2.7.2 : Sections Construct
4. Section 2.7.3 : Single Construct
5. Section 2.7.4 : Workshare Construct
6. Section 2.8.1 : Simd Construct
7. Section 2.8.3 : Loop Simd Construct
8. Section 2.9.1 : Task Construct
9. Section 2.9.2 : Taskloop Construct
10. Section 2.9.3 : Taskloop Simd Construct
Most of the test cases added as part of this change contains semantic errors except few cases which are semantically correct but thrown a semantic error.
Currently flang is not throwing the errors for these cases and throwing semantic errors for the following correct test cases
{omp-do03.f90 , omp-loop-simd01.f90 , omp-simd02.f90 , omp-taskloop01.f90}
Hence, all the test cases are marked as XFAIL.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D87908
The Flang driver depends on libclangBasic. This means, among other
things, that some of the tablegen files (e.g. diagnostic definitions)
need to be generated before various libclangBasic header files can be
included (e.g. DiagnosticIDs.h). If we are lucky, libclangBasic is
indeed built before various flang driver libraries that depend on it
are. This patch makes sure that this is deterministic - i.e.
libclangBasic is built before the Flang driver libraries are.
Differential Revision: https://reviews.llvm.org/D88110
In the frontend driver we should be using FC1Option (frontend driver
options) instead of FlangOption (flang driver options).
Differential Revision: https://reviews.llvm.org/D88108
These tests aren't adding much value and consensus has been reached for
there removal.
For more context, please refer to discussion in this revision:
https://reviews.llvm.org/D87846
Fortran 2018 15.4.2.2(4)(c) says nonassumed or explicit non-constant
length parameter require explicit interface. The "nonassumed" part was
missing in f18 characteristic analysis causing CanBeCalledViaImplicitInterface
to return false for `CHARACTER(*) function foo()` like interfaces.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D88075
The Microsoft compiler seems to have difficulties to decide between a const/non-const method of a captured object context in a closure. The error message is:
```
symbol.cpp(261): error C2668: 'Fortran::semantics::Symbol::detailsIf': ambiguous call to overloaded function
symbol.h(535): note: could be 'const D *Fortran::semantics::Symbol::detailsIf<Fortran::semantics::DerivedTypeDetails>(void) const'
symbol.h(534): note: or 'D *Fortran::semantics::Symbol::detailsIf<Fortran::semantics::DerivedTypeDetails>(void)'
symbol.cpp(261): note: while trying to match the argument list '()'
```
Explicitly using the this-pointer resolves this problem.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D88052
Like in D87961, msvc has difficulties deducing the template argument. The error message is:
```
expr-parsers.cpp(383): error C2672: 'applyLambda': no matching overloaded function found
```
Explicitly pass the first template argument to help it.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D88001
Msvc has difficulties deducing the template argument here. The error message is:
```
basic-parsers.h(790,12): error C2672: 'applyFunction': no matching overloaded function found
```
Explicitly pass the first template argument to help it.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D87961
Configure default value of `LLVM_ENABLE_WARNINGS` in `HandleLLVMOptions.cmake`.
`LLVM_ENABLE_WARNINGS` is documented as ON by default, but `HandleLLVMOptions` assumes the default has been set somewhere else. If it has not been explicitly set, then `HandleLLVMOptions` implicitly uses OFF as a default.
This removes the various `option()` declarations in favor of a single declaration in `HandleLLVMOptions`. This will prevent the unwanted use of `-w` that is mentioned in a couple of the comments.
Reviewed By: DavidTruby, #libunwind, JDevlieghere, compnerd
Differential Revision: https://reviews.llvm.org/D87243
Hew more closely to the C17 standard; perform macro replacement
of arguments to function-like macros unless they're being stringified
or pasted. Test with a model "assert" macro idiom that exposed
the problem.
Differential Revision: https://reviews.llvm.org/D87650
Under current configuration, the permission of `flang` after installation is 700.
This could bring a problem for system administrators who build and install flang
for other users, which only the user who builds LLVM can execute it, and others
can not. In this patch, the explicit permission setting in the `install` command
is removed, and let CMake determine what perssion to be used like other components.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D87783
According to section 9.4.1, paragraph 3,
If the starting point is greater than the ending point, the substring has
length zero
But the compilers code for substring processing was failing a call to `CHECK()`
in this case. I fixed this by just setting the number of items in the
resulting string to 0 for this situation.
Differential Revision: https://reviews.llvm.org/D87799
MSVC tries to expand templates that are in the false-branch of a `if constexpr` construct. In this case, the condition checks whether a tuple has at least one element and then is trying to access it using `std::get<0>`, which fails when the tuple has 0 elements.
The workaround is to extract that case into a separate method.
This patch is part of the series to make flang compilable with MS Visual Studio <http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html>.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D87728
Adds a new GettingInvolved page to documentation which provides details about
mailing list, chats and calls.
Adds a sidebar page which provides common links on
all documentation pages.
The links include:
- Getting Started
- Getting Involved
- Github Repository
- Bug Reports
- Code Review
Depends on https://reviews.llvm.org/D87242
Reviewed By: richard.barton.arm
Differential Revision: https://reviews.llvm.org/D87270
The Fortran standard discusses BZ mode (treat blanks as zero digits)
explicitly in its effect on the editing of the digits prior to the
exponent part, but doesn't mention it in description of the
exponent part. Other compilers honor BZ mode in the exponent,
so we should do so too. So "1 e 1 " is 1.E11 in BZ mode.
Differential Revision: https://reviews.llvm.org/D87653
C-style /*comments*/ are removed during preprocessing directive
tokenization, but Fortran !comments need to be specifically
allowed.
Fixes LLVM bugzilla 47466.
Differential Revision: https://reviews.llvm.org/D87638
A type name in an IMPLICIT declaration that was later used in a PARAMETER
statement caused problems because the default symbol scope had not yet been
initialized. I avoided dereferencing in the situation where the default scope
was uninitialized and added a test that triggers the problem.
Also, once I corrected the bad dereference, the compiler was putting out
misleading error messages. The underlying error us due to violating section
7.5.10, paragraph 4, which states:
A structure constructor shall not appear before the referenced type is
defined.
I fixed this by testing to see if a type that is used in a structure
constructor is forward referenced.
Differential Revision: https://reviews.llvm.org/D87535
The std::string holding the content of a CookedSource no longer
needs to be exposed in its API after the recent work that allows
the parsing context to hold multiple instances of a CookedSource.
So clean the API. These changes were extracted from some work in
progress that was made easier by the API changes.
Differential Revision: https://reviews.llvm.org/D87635
Now backends spell out which namespace they want to be in, instead of relying on
clients #including them inside already-opened namespaces. This also means that
cppNamespaces should be fully qualified, and there's no implicit "::mlir::"
prepended to them anymore.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D86811
Change the analyzed form of type-bound assignment to match that of call
statements. Resolve the binding name to a specific subprogram when
possible by using `GetBindingResolution`. Otherwise leave it as a
type-bound procedure call.
Differential Revision: https://reviews.llvm.org/D87541
Integer case values were being compared as unsigned by operator<
on evaluate::value::Integer. Change that to signed so that overlap
can be detected correctly.
Explicit CompareUnsigned and BLT are still available if unsigned
comparison is needed.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47309
Differential Revision: https://reviews.llvm.org/D87595
A type name in an IMPLICIT declaration that was later used in a PARAMETER
statement caused problems because the default symbol scope had not yet been
initialized. I avoided dereferencing in the situation where the default scope
was uninitialized and added a test that triggers the problem.
Differential Revision: https://reviews.llvm.org/D87535
Define Fortran::Semantics::Scope::GetName in the header so it is available
to Fortran::Evaluate::Tool::AttachDeclaration without a circular dependency
introduced in 82edd42.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D87505
Add a new index page to be the Flang documentation mainpage instead of
Overview.md, which jumps straight into the compiler Design. The index file
needs to be in .rst format to use the toctree directive to create table of
contents.
Also use the sphinx_markdown_tables extension to generate html tables form
markdown.
A number of additional style changes to the existing docs were needed to make
this work well:
* Convert all headings to the # style, which works better with toctree's
titlesonly option. Ensure that there is only one top-level heading per
document.
* Add a title to documents that don't have one for rendering on the index.
* Convert the grammar docs from .txt to .md. for better rendering
* Fixed broken link to a section in another document - sphinx does not seem to
support anchor links in markdown files.
Depends on D87226
Reviewed By: sameeranjoshi
Differential Revision: https://reviews.llvm.org/D87242
Summary:
This is the first patch implementing the new Flang driver as outlined in [1],
[2] & [3]. It creates Flang driver (`flang-new`) and Flang frontend driver
(`flang-new -fc1`). These will be renamed as `flang` and `flang -fc1` once the
current Flang throwaway driver, `flang`, can be replaced with `flang-new`.
Currently only 2 options are supported: `-help` and `--version`.
`flang-new` is implemented in terms of libclangDriver, defaulting the driver
mode to `FlangMode` (added to libclangDriver in [4]). This ensures that the
driver runs in Flang mode regardless of the name of the binary inferred from
argv[0].
The design of the new Flang compiler and frontend drivers is inspired by it
counterparts in Clang [3]. Currently, the new Flang compiler and frontend
drivers re-use Clang libraries: clangBasic, clangDriver and clangFrontend.
To identify Flang options, this patch adds FlangOption/FC1Option enums.
Driver::printHelp is updated so that `flang-new` prints only Flang options.
The new Flang driver is disabled by default. To enable it, set
`-DBUILD_FLANG_NEW_DRIVER=ON` when configuring CMake and add clang to
`LLVM_ENABLE_PROJECTS` (e.g. -DLLVM_ENABLE_PROJECTS=“clang;flang;mlir”).
[1] “RFC: new Flang driver - next steps”
http://lists.llvm.org/pipermail/flang-dev/2020-July/000470.html
[2] “RFC: Adding a fortran mode to the clang driver for flang”
http://lists.llvm.org/pipermail/cfe-dev/2019-June/062669.html
[3] “RFC: refactoring libclangDriver/libclangFrontend to share with Flang”
http://lists.llvm.org/pipermail/cfe-dev/2020-July/066393.html
[4] https://reviews.llvm.org/rG6bf55804924d5a1d902925ad080b1a2b57c5c75c
co-authored-by: Andrzej Warzynski <andrzej.warzynski@arm.com>
Reviewed By: richard.barton.arm, sameeranjoshi
Differential Revision: https://reviews.llvm.org/D86089
When we define a derived type that extends another derived type, we can then
create a structure constructor that contains values for the fields of both the
child type and its parent. The compiler's internal representation of that
value contains the name of the parent type where a component name would
normally appear. This caused an assert during contant folding.
There are three cases for components that appear in structure constructors.
The first is the normal case of a component appearing in a structure
constructor for its type.
The second is a component of the parent (or grandparent) type appearing in a
structure constructor for the child type.
The third is the parent type component, which can appear in the structure
constructor of its child.
There are also cases where the component can be arrays.
I created the test case folding12.f90 that covers all of these cases and
modified the code to handle them.
Most of my changes were to the "Find()" method of the type
"StructureConstructor" where I added code to cover the second and third cases
described above. To handle these cases, I needed to create a
"StructureConstructor" for the parent type component and return it. To handle
returning a newly created "StructureConstructor", I changed the return type of
"Find()" to be "std::optional" rather than an ordinary pointer.
This change supersedes D86172.
Differential Revision: https://reviews.llvm.org/D87151
Change how generic operators and assignments are checked for
distinguishable procedures. Because of how they are invoked, available
type-bound generics and normal generics all have to be considered
together. This is different from how generic names are checked.
Move common part of checking into DistinguishabilityHelper so that it
can be used in both cases after the appropriate procedures have been
added.
Cache result of Procedure::Characterize(Symbol) in a map in
CheckHelper so that we don't have to worry about passing the
characterized Procedures around or the cost of recomputing them.
Add MakeOpName() to construct names for defined operators and assignment
for using in error messages. This eliminates the need for different
messages in those cases.
When the procedures for a defined operator or assignment are undistinguishable,
include the type name in the error message, otherwise it may be ambiguous.
Add missing check that procedures for defined operators are functions
and that their dummy arguments are INTENT(IN) or VALUE.
Differential Revision: https://reviews.llvm.org/D87341
For out of tree builds, the user generally needs to specify LLVM_DIR and
MLIR_DIR on the command line so that the correct LLVM and MLIR
installations are picked up.
If the provided paths are absolute, everything works fine, however for
buildbots it is customary to work with relative paths, and that makes it
difficult for CMake to find the right modules to include.
This patch changes CMakeLists.txt to convert LLVM_DIR and MLIR_DIR to
absolute paths before adding them to CMAKE_MODULE_PATH. The inputs are
assumed to be relative to the source directory (llvm-project/flang).
Differential Revision: https://reviews.llvm.org/D87083
Msvc crashes with "INTERNAL COMPILER ERROR" when iterating over an `std::initializer_list` in a constexpr constructor. Explicitly use the iterator instead.
This patch is part of the series to [[ http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html | make flang compilable with MS Visual Studio ]].
Reviewed By: isuruf
Differential Revision: https://reviews.llvm.org/D86425
These are owned by an instance of a new class AllCookedSources.
This removes the need for a Scope to own a string containing
a module's cooked source stream, and will enable errors to be
emitted when parsing module files in the future.
Differential Revision: https://reviews.llvm.org/D86891
The DumpSymbolsSources() routine ordered its output by the addresses
of the names of the symbols, and was susceptible to variation across
environments. Fixed by using a multimap using the values of the names.
Differential Revision: https://reviews.llvm.org/D87035
Fixed some version information in flang/f18:
- fixed the behavior of the -v switch: this flag enables verbosity with used with arguments, but just displays the version when used alone (related to this bug: https://bugs.llvm.org/show_bug.cgi?id=46017)
- added __FLANG, __FLANG_MAJOR__, __FLANG_MINOR__ and __FLANG_PATCHLEVEL__ (similar to their __F18* counterparts) for compatibility purpose
Reviewed By: AlexisPerry, richard.barton.arm, tskeith
Differential Revision: https://reviews.llvm.org/D84334
Don't use just 128-bit integer as the type for integer
CASE statement constants. Use the actual type of the
literal constants that appeared.
Differential Review: https://reviews.llvm.org/D86875
Conformance checking of the shapes of the operands of
array expressions can't, of course, always be done at
compilation time; but when the shapes are known and
nonconformable, we should catch the errors that we can.
Differential Revision: https://reviews.llvm.org/D86887
Change the expression representation TypeParamInquiry from being
a class that's templatized on the integer KIND of its result into
a monomorphic representation that results in a SubscriptInteger
that can then be converted.
This is a minor simplification, but it's worth doing because
it is believed to also be a work-around for bugs in the MSVC
compiler with overload resolution that affect the expression
traversal framework.
Differential Revision: https://reviews.llvm.org/D86551
Compilation of the following program currently generates a warning message:
i = 1
if (i .eq. 0) then
write(6, 200) i
200 format (I8)
end if
write(6, 200) i
end
x.f90:6:9: Label '200' is not in scope
write(6, 200) i
^^^^^^^^^^^^^^^
Whereas branch targets must conform to the Clause 11.1.2.1 program
requirement "Transfer of control to the interior of a block from
outside the block is prohibited, ...", this doesn't apply to format
statement references.
When an error is associated with a symbol, it was marked with a flag
from Symbol::Flag. The problem with that is that you need a mutable
symbol to do that. Instead, store the set of error symbols in the
SemanticsContext. This allows for some const_casts to be eliminated.
Also, improve the internal error that occurs if SetError is called
but no fatal error has been reported.
Differential Revision: https://reviews.llvm.org/D86740
This patch fix the prasing for the gang-arg values for the gang clause. It also adds
some clause validity tests for the loop construct.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D86584
The tile clause in OpenACC 3.0 imposes some restriction. Element in the tile size list are either * or a
constant positive integer expression. If there are n tile sizes in the list, the loop construct must be immediately
followed by n tightly-nested loops.
This patch implement these restrictions and add some tests.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D86655
This applies the same fix that D84748 did for macro definitions.
Appropriate include path is now automatically set for all libraries
which link against gtest targets, which avoids the need to set
include_directories in various parts of the project.
Differential Revision: https://reviews.llvm.org/D86616
A number of I/O syntax rules involve variables that will be written to,
and must therefore be definable. This includes internal file variables,
IOSTAT= and IOMSG= specifiers, most INQUIRE statement specifiers, a few
other specifiers, and input variables. This patch checks for
these violations, and implements several additional I/O TODO constraint
checks.
Differential Revision: https://reviews.llvm.org/D86557
When an illegal character appears in Fortran source (after
preprocessing), catch and report it in the prescanning phase
rather than leaving it for the parser to cope with.
Differential Revision: https://reviews.llvm.org/D86553
Accept and represent "global" compiler directives that appear
before and between program units in a source file.
Differential Revision: https://reviews.llvm.org/D86555
If the label field is empty, and macro replacement occurs,
the rescanned text might be misclassified as a comment card
if it happens to begin with a C or a D. Insert a leading
space into these otherwise empty label fields.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47173
If an error has occurred a symbol may have a DeclTypeSpec but no
valid DynamicType. There is no need to compute the size of erroneous
symbols.
Also, we only need to process object entities and procedure entities.
All other kinds of symbols can be skipped.
This fixes another problem revealed by https://bugs.llvm.org/show_bug.cgi?id=47265
Differential Revision: https://reviews.llvm.org/D86484
A specification expression can reference an implicitly declared variable
in the host procedure. Because we have to process specification parts
before execution parts, this may be the first time we encounter the
variable. We were assuming the variable was implicitly declared in the
scope where it was encountered, leading to an error because local
variables may not be referenced in specification expressions.
The fix is to tentatively create the implicit variable in the host
procedure because that is the only way the specification expression can
be valid. We mark it with the flag `ImplicitOrError` to indicate that
either it must be implicitly defined in the host (by being mentioned in
the execution part) or else its use turned out to be an error.
We need to apply the implicit type rules of the host, which requires
some changes to implicit typing.
Variables in common blocks are allowed to appear in specification expressions
(because they are not locals) but the common block definition may not appear
until after their use. To handle this we create common block symbols and object
entities for each common block object during the `PreSpecificationConstruct`
pass. This allows us to remove the corresponding code in the main visitor and
`commonBlockInfo_.curr`. The change in order of processing causes some
different error messages to be emitted.
Some cleanup is included with this change:
- In `ExpressionAnalyzer`, if an unresolved name is encountered but
no error has been reported, emit an internal error.
- Change `ImplicitRulesVisitor` to hide the `ImplicitRules` object
that implements it. Change the interface to pass in names rather
than having to get the first character of the name.
- Change `DeclareObjectEntity` to have the `attrs` argument default
to an empty set; that is the typical case.
- In `Pre(parser::SpecificationPart)` use "structured bindings" to
give names to the pieces that make up a specification-part.
- Enhance `parser::Unwrap` to unwrap `Statement` and `UnlabeledStatement`
and make use of that in PreSpecificationConstruct.
Differential Revision: https://reviews.llvm.org/D86322
Need to build sphinx using below flags to Cmake
`-DLLVM_ENABLE_SPHINX=ON -DSPHINX_WARNINGS_AS_ERRORS=OFF`.
Generate html docs using cmake target
`docs-flang-html`
Generated html files should be at `build/tools/flang/docs/html`.
Patch in series from the dicussion on review
https://reviews.llvm.org/D85828
After this patch the markdown docmentation must be written using guide in-
`llvm/docs/MarkdownQuickstartTemplate.md`
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D86131
This patch fix the usage of the wait-argument in a clause and add several tests and fix the unparsing of
the wait-argument.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D86325
Msvc has trouble defining a struct/class and defining a constexpr symbol in the same declarator. It reports the following error:
```
basic-parsers.h(809): error C2131: expression did not evaluate to a constant
basic-parsers.h(809): note: failure was caused by call of undefined function or one not declared 'constexpr'
basic-parsers.h(809): note: see usage of 'Fortran::parser::OkParser::OkParser'
```
Fix the msvc compilation by splitting the two definitions into two separate declarators.
This patch is part of the series to [[ http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html | make flang compilable with MS Visual Studio ]].
Reviewed By: DavidTruby, klausler
Differential Revision: https://reviews.llvm.org/D85937
The identifier `Expr` within the scope of the Expr class (including its temple specializations) refers to the current template/instantiation (see https://en.cppreference.com/w/cpp/language/injected-class-name for details). The `MapTemplate` template expect a non-instantiated template as the first template argument, not the concrete instantiation of `Expr`.
At least msvc interprets `Expr` as the injected class name, whereas gcc and clang use the global `flang::evaluate::Expr` template. Disambiguate by explicitly using the namespace.
This patch is part of the series to [[ http://lists.llvm.org/pipermail/flang-dev/2020-July/000448.html | make flang compilable with MS Visual Studio ]].
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D85646
When we report an error for a bad character kind, don't keep it in the
`DeclTypeSpec`. Otherwise there could be further problems. In this case,
`ComputeOffsets()` got an assertion error because we didn't recognize
`CHARACTER(*,8)` as needing a descriptor because of the bad kind.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47173
Differential Revision: https://reviews.llvm.org/D86357
This greatly simplifies a large portion of the underlying infrastructure, allows for lookups of singleton classes to be much more efficient and always thread-safe(no locking). As a result of this, the dialect symbol registry has been removed as it is no longer necessary.
For users broken by this change, an alert was sent out(https://llvm.discourse.group/t/removing-kinds-from-attributes-and-types) that helps prevent a majority of the breakage surface area. All that should be necessary, if the advice in that alert was followed, is removing the kind passed to the ::get methods.
Differential Revision: https://reviews.llvm.org/D86121
When a procedure name was used on the RHS of an assignment we were not
reporting the error. When one was used in an expression the error
message wasn't very good (e.g. "Operands of + must be numeric; have
INTEGER(4) and untyped").
Detect these cases in ArgumentAnalyzer and emit better messages,
depending on whether the named procedure is a function or subroutine.
Procedure names may appear as actual arguments to function and
subroutine calls so don't report errors in those cases. That is the same
case where assumed type arguments are allowed, so rename `isAssumedType_`
to `isProcedureCall_` and use that to decide if it is an error.
Differential Revision: https://reviews.llvm.org/D86107
Use the TableGen directive back-end to generate code for the clauses unparsing.
Reviewed By: sscalpone, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D85851
As with use-associated symbols, copy the attributes and flags from the
original symbol onto host-associated symbols when they are created.
This was showing up as an error on a deallocate of a host-associated
name. We reported an error because the symbol didn't have the POINTER
or ALLOCATABLE attribute.
Differential Revision: https://reviews.llvm.org/D85763
This adds a test for D85862 to ensure that preprocessor definitions
passed on command lines don't regress in future.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D85967
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
OpenACC combined construct can have an optional end directive. This patch handle this
case in the parsing/unparsing with a canonicalization step. Unlike OmpEndLoopDirective,
this doesn't need a special treatment in the pre-fir tree as there is no clause attached to
a AccEndCombinedDirective.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D84481
The descriptor-based I/O routine was using the size of the descriptor
rather than the size of the described data for the transfer. Fix,
and add a comment to the relevant API.
Differential Revision: https://reviews.llvm.org/D85863
The shape (esp. the size) of the result of a call to TRANSFER
is implemented according to the definition in the standard.
Differential Revision: https://reviews.llvm.org/D85866
Character literal substrings used as arguments were causing asserts. This
happened when the code was trying to get the DynamicType of the substring. We
were only recording the DynamicType of the Designator on which the substring
was based. For character literal substrings, the Designator was a character
literal, and we weren't handling getting its type.
I fixed this by changing the `GetType()` method for `DynamicType` to check to
see if we were getting the type of a `Substring` and calculating the type of
the substring by getting the number of bytes in an element of the string.
I also changed the test `resolve49.f90` with some tests, one of which causes
the original crash.
Differential Revision: https://reviews.llvm.org/D85908
If an unrestricted specific intrinsic function name is first encountered
as an actual argument, it should be interpreted as an object entity,
not a procedure entity.
Fix some tests that depended on the previous interpretation by adding
explicit INTRINSIC statements.
Differential Revision: https://reviews.llvm.org/D85792
Summary:
Fixes bug : https://bugs.llvm.org/show_bug.cgi?id=46931
This commit add a new flag -DLLVM_ENABLE_SPHINX=ON to cmake command to generate sphinx documentation,
along with new cmake targets `docs-flang-html`.
`ninja docs-flang-html` - generates sphinx documentation.
Generated release notes are present in <builddir>/tools/flang/docs/html/ folder.
Reviewers: richard.barton.arm, DavidTruby
Tags: #flang
Differential Revision: https://reviews.llvm.org/D85470
Allow compiler directives in the implicit-part and before USE statements
in the specification-part.
Differential Revision: https://reviews.llvm.org/D85693
This patch takes advantage of the directive information and tablegen generation
to replace the clauses class parse tree and in the dump parse tree sections.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D85549
According to llvm/cmake/config-ix.cmake, gcc's potentially uninitialized
use analysis has lots of false positives. We are encountering one in
flang/lib/Lower/CharacterExpr.cpp.
That warning is disabled for gcc in in-tree builds; this does the same
thing for out-of-tree builds.
Differential Revision: https://reviews.llvm.org/D85694
This patch takes advantage of the directive information and tablegen generation
to replace the clauses class parse tree and in the dump parse tree sections.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D85549
If a bound of a subscript triplet is present but fails to analyze
due to an error, return nullopt rather than returning a Triplet with
that bound missing. This is so we can distinguish an absent bound from
an erroneous one and avoid spurious errors.
Differential Revision: https://reviews.llvm.org/D85672
To prevent mistokenization of CHARACTER*2HXY as a Hollerith
literal constant while allowing it in DATA A/2*2HXY/, there's
a little state that tracks whether a / has been seen earlier
in the same statement. But it was being reset on each line,
not statement, so Hollerith in a DATA statement continuation
line was incorrectly tokenized. Fixed.
Differential Revision: https://reviews.llvm.org/D85571
Fixed some version information in flang/f18:
- fixed the behavior of the -v switch: this flag enables verbosity with used with arguments, but just displays the version when used alone (related to this bug: https://bugs.llvm.org/show_bug.cgi?id=46017)
- added __FLANG, __FLANG_MAJOR__, __FLANG_MINOR__ and __FLANG_PATCHLEVEL__ (similar to their __F18* counterparts) for compatibility purpose
Reviewed By: sscalpone, AlexisPerry, richard.barton.arm, tskeith
Differential Revision: https://reviews.llvm.org/D84334
Objects that are storage associated by EQUIVALENCE and
initialized with DATA are initialized by creating a
compiler temporary data object in the same scope,
assigning it an offset, type, and size that covers the
transitive closure of the associated initialized original
symbols, and combining their initializers into one common
initializer for the temporary.
Some problems with offset assignment of EQUIVALENCE'd objects
in COMMON were exposed and corrected, and some more error
cases are checked.
Remove obsolete function.
Small bugfix (nested implied dos).
Add a test.
Fix struct/class warning.
Differential Revision: https://reviews.llvm.org/D85560
This revision refactors the default definition of the attribute and type `classof` methods to use the TypeID of the concrete class instead of invoking the `kindof` method. The TypeID is already used as part of uniquing, and this allows for removing the need for users to define any of the type casting utilities themselves.
Differential Revision: https://reviews.llvm.org/D85356
Add support for OutputDescriptor() and InputDescriptor()
in the I/O runtime. Change existing scalar formatted I/O
functions to drive descriptor-based I/O routines internally.
Differential Revision: https://reviews.llvm.org/D85491
In the example below we were producing the error message
"Assignment to constant 'f' is not allowed":
```
function f() result(r)
f = 1.0
end
```
This changes it to a more helpful message when the LHS is a subprogram
name and also mentions the function result name when it's a function.
Differential Revision: https://reviews.llvm.org/D85483
Add `-fimplicit-none-type-always` to treat each specification-part
like it has `IMPLICIT NONE`. This is helpful for enforcing good Fortran
programming practices. We might consider something similar for
`IMPLICIT NONE(EXTERNAL)` as well.
Add `-fimplicit-none-type-never` to ignore occurrences of `IMPLICIT NONE`
and `IMPLICIT NONE(TYPE)`. This is to handle cases like the one below,
which violates the standard but it accepted by some compilers:
```
subroutine s(a, n)
implicit none
real :: a(n)
integer :: n
end
```
Differential Revision: https://reviews.llvm.org/D85363
Clang 9 gets the following warning after revision `D85104`.
```
../../flang/lib/Semantics/check-directive-structure.h:36:7: error: 'Fortran::semantics::DirectiveStructureChecker<llvm::omp::Directive, llvm::omp::Clause, Fortran::parser::OmpClause, 77>' has virtual functions but non-virtual destructor [-Werror,-Wnon-virtual-dtor]
```
The fix is the make the destructor virtual. Neither it nor the
constructor need to be public, so make them protected.
Differential Revision: https://reviews.llvm.org/D85383
This patch remove duplicated code between the check-omp-structure and the check-acc-structure
and unify it into a check-directive-structure templated class.
Reviewed By: kiranchandramohan, sscalpone, ichoyjx
Differential Revision: https://reviews.llvm.org/D85104
Based on https://reviews.llvm.org/D84022 with additional changes to
maintain out-of-tree builds.
Original commit message:
Currently the binaries are output directly into the bin subdirectory of
the build directory. This doesn't work correctly with multi-config
generators which should output the binaries into <CONFIG_NAME>/bin
instead.
The original patch was implemented by David Truby and the additional
changes added here were also proposed by David Truby.
Differential Revision: https://reviews.llvm.org/D85078/
Co-authored-by: David Truby <david.truby@arm.com>
- Moved TypeRange into its own header/cpp file, and add hashing support.
- Change FunctionType::get() and TupleType::get() to use TypeRange
Differential Revision: https://reviews.llvm.org/D85075
External input was detecting "end of file" conditions in
BeginExternal...Input() and BeginUnformattedInput() routines
before EnableHandlers() could have been called. Defer the
"start next record" processing to the input data item
handlers (and EndIoStatement() for when there are no data
items).
Differential Revision: https://reviews.llvm.org/D85161
Extend the raw file wrapper to get accessibility, positioning,
and size information. This is needed for INQUIRE (to follow).
Differential Revision: https://reviews.llvm.org/D85160
The current output is a bit clunky and requires including files+macros everywhere, or manually wrapping the file inclusion in a registration function. This revision refactors the pass backend to automatically generate `registerFooPass`/`registerFooPasses` functions that wrap the pass registration. `gen-pass-decls` now takes a `-name` input that specifies a tag name for the group of passes that are being generated. For each pass, the generator now produces a `registerFooPass` where `Foo` is the name of the definition specified in tablegen. It also generates a `registerGroupPasses`, where `Group` is the tag provided via the `-name` input parameter, that registers all of the passes present.
Differential Revision: https://reviews.llvm.org/D84983
This patch lower `!OMP PARALLEL` construct from PFT to OpenMPDialect operations.
This is first patch in this direction(lowering parallel construct).
OpenMP parallel construct can have multiple clauses and parameters. This patch
only implements lowering of an empty(contains no code in body) parallel construct
without any clauses or parameters.
Patch is carved out of following approved PR:
https://github.com/flang-compiler/f18-llvm-project/pull/322
Reviewed By: kiranchandramohan, DavidTruby
Differential Revision: https://reviews.llvm.org/D84965
1. Annotate the sources with constraint numbers.
2. Add tests for
*C7107 (R765) digit shall have one of the values 0 or 1.
*C7108 (R766) digit shall have one of the values 0 through 7.
*C7109 (R764) A boz-literal-constant shall appear only as a data-stmt-constant in a DATA statement, or where explicitly allowed in 16.9 as an actual argument of an intrinsic procedure.
Reviewed By: PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84504
Add a usage string and a defaults section that clarifies:
* If no input files are given, f18 reads from stdin
* If no input files are given, f18 dumps the parse tree.
* The default behaviour is to exec F18_FC.
* The fefault F18_FC setting is 'gfortran'
Adds a simple regression test which tests the top and tail of the help
screen and the exit status.
Depends on D84855
Differential Revision: https://reviews.llvm.org/D84856
When flang is invoked with no files it waits for input on stdin. Make it
print a message saying this to prevent the user being surprised.
Differential Revision: https://reviews.llvm.org/D84855
CMPLX folding was expecting only one arguments in case X argument
is complex. This is wrong since there is also the optional KIND
argument.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D84936
I fixed an assert caused by passing an empty array as the source= argument to
RESHAPE(). In the process, I noticed that there were no tests for RESHAPE(),
so I wrote a test that covers all the description in 16.9.163. In the process,
I made the error messages more consistent and descriptive. I also changed the
test to see if a reference to an intrinsic function was a constant to say that
it is a constant if it's a refererence to an invalid intrinsic. This avoids
emitting multiple messages for the same erroneous source.
Differential Revision: https://reviews.llvm.org/D84904
When declaring the same variable twice with an initialization, we were failing
an internal check. I fixed this by checking to see if the associated symbol
already had an error.
I added tests for pointer and non-pointer initialization of duplicate names.
Differential Revision: https://reviews.llvm.org/D84969
To make it easier for lowering to identify which symbols from the host
are captured by internal subprograms, create HostAssocDetails for them.
In particular, if a symbol is referenced and it is contained in a
subprogram or main program that is not the same as the containing
program unit of the reference, a HostAssocDetails symbol is created
in the current scope.
Differential Revision: https://reviews.llvm.org/D84889
The intrinsic lowering facility is based on the generic intrinsic names to avoid
duplicating implementations. Specific intrinsics call are re-written to call to
the generic versions by the front-end but this cannot be done when specific intrinsics
are passed as arguments (the rewrite would give illegal/ambiguous unparsed Fortran).
Solve the issue by making the specific to generic name mapping accessible to lowering
and can be later used to generate the unrestricted intrinsic functions.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D84842
Summary:
Currently the binaries are output directly into the bin subdirectory of the
build directory. This doesn't work correctly with multi-config generators which
should output the binaries into <CONFIG_NAME>/bin instead.
Reviewers: sscalpone, richard.barton.arm
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84022
When an instrinsic function is declared in a type declaration statement
we need to set the INTRINSIC attribute and (per 8.2(3)) ignore the
specified type.
To simplify the check, add IsIntrinsic utility to BaseVisitor.
Also, intrinsics and external procedures were getting assigned a size
and offset and they shouldn't be.
Differential Revision: https://reviews.llvm.org/D84702
Move `ResolveAccParts` and `ResolveOmpParts` from resolve-names.cpp to
resolve-directives.{h,cpp}. Move the implementation in the classes
`DirectiveAttributeVisitor`, `AccAttributeVisitor`, and
`OmpAttributeVisitor` to resolve-directives.cpp as well.
To allow this to happen, move `EvaluateIntExpr` and introduce
`EvaluateInt64` to resolve-names-utils.h. The latter is also useful
elsewhere in resolve-names.cpp for converting an Expr to std::int64_t.
The other problem was that `ResolveDesignator` was called from the code
that was moved. At the moment it doesn't seem to be doing anything so I
removed the calls (and no tests failed). If it proves to be needed, we
can either resolve those designators in resolve-names.cpp or pass the
`ResolveDesignator` function in to the code that needs to call it.
Differential Revision: https://reviews.llvm.org/D84768
A comma is not required between a scale factor and a following
data edit descriptor (C1302).
Reviewed By: PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84369
If a symbol (that is not a dummy argument) is implicitly declared inside
a statement function, don't create it in the statement function's scope.
Instead, treat statement functions like blocks when finding the inclusive
scope and create the symbol there.
Add a new flag, StmtFunction, to symbols that represent statement functions.
Differential Revision: https://reviews.llvm.org/D84588
Summary:
As a corrollary, these tests are now run as part of the check-flang
target.
Reviewers: sscalpone
Subscribers: mgorny, delcypher, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83946
The result of a statement function may require an implicit conversion
to match its result type. Add that to the expression that represents
the statement function body in SubprogramDetails.
Extract the analysis of that expression into a separate function.
Dump the statement function expression as part of the dump of
SubprogramDetails.
Differential Revision: https://reviews.llvm.org/D84452
Summary:
Expressions like `iVar==z'fe'` were causing an assertion error because
the `Relate()` function in `Evaluate/tools.cpp` that processes
relational operators didn't deal with BOZ literals, which are typeless.
I fixed this by checking to see if the operands are BOZ literals. If
so, if the other operand is REAL, I convert them to REAL. Otherwise, I convert
them to integers with default kind.
I also added a test to resolve63.f90 that triggers the problem.
Reviewers: tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83917
Summary:
This patch fix a problem where clause needed to be in the allowed set even
they were in the required set. A required clause is allowed obvisouly. This allow
to remove the duplicate in OMP.td
Reviewers: kiranchandramohan, DavidTruby, richard.barton.arm, jdoerfert, sscalpone, kiranktp, ichoyjx
Reviewed By: kiranchandramohan
Subscribers: yaxunl, guansong, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84353
It turns out that COMPLEX formatted input needs its own runtime APIs
so that null values in list-directed input skip the entire COMPLEX
datum rather than just a real or imaginary part thereof.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84370
add_compile_options is more sensitive to its location in the file than add_definitions--it only takes effect for sources that are added after it. This updated patch ensures that the add_compile_options is done before adding any source files that depend on it.
Using add_definitions caused the flag to be passed to rc.exe on Windows and thus broke Windows builds.
Summary:
When a constant array of empty strings goes through contant folding, the result
is something that contains no bytes. If this array is passed to the intrinsic
function `RESHAPE()`, we were not handling things correctly. I fixed this by
checking for an empty destination when calling the function `CopyFrom()` on an
array of strings.
I also added a test with a couple of different examples that trigger the
problem.
Reviewers: klausler, tskeith, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84352
After lots of follow-up fixes, there are still problems, such as
-Wno-suggest-override getting passed to the Windows Resource Compiler
because it was added with add_definitions in the CMake file.
Rather than piling on another fix, let's revert so this can be re-landed
when there's a proper fix.
This reverts commit 21c0b4c1e8.
This reverts commit 81d68ad27b.
This reverts commit a361aa5249.
This reverts commit fa42b7cf29.
This reverts commit 955f87f947.
This reverts commit 8b16e45f66.
This reverts commit 308a127a38.
This reverts commit 274b6b0c7a.
This reverts commit 1c7037a2a5.
When FORMAT control reaches the final parenthesis and data items
remain, we advance a record and revert to the beginning of the
FORMAT for further items. But when the FORMAT contains any
nested parenthesized group of editing descriptors, possibly
repeated, reversion must be to the beginning of the last such
top-level parenthesized group, including its repetition count.
Reviewed By: sscalpone, PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84281
The prescanner looks for implicit continuation lines when
there are unclosed parentheses at the end of a line, so that
source preprocessing macro references with arguments that span
lines are recognized. The condition that determines this
implicit continuation has been put into a predicate member
function and corrected to apply only when the following line
is source (not a preprocessing directive, comment, &c.).
Fixes bugzilla #46768.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84280
Add SetConvert() to the OPEN statement's runtime API.
Add ByteswapOption() to the main program's runtime API.
Check a $FORT_CONVERT environment variable, too, for
a swapping specifier.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84284
In fixed form source, complain when a label digit appears
outside the label field & when a non-digit appears in the label
field.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84283
Add a missing newline to IEEE FP flag formatting, and
don't neglect to emit STOP when there's no code number.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D84060
Summary: For Lw output editing, emit (w-1) blanks before the T or the F.
Reviewed By: sscalpone, PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84059
The runtime was requiring that STATUS='OLD' be explicitly specified
on an OPEN statement for a connected unit. There error should issue
only if a STATUS= other than 'OLD' is specified; an OPEN with no
STATUS= specifier is okay.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84079
Accept name=value as part of a !DIR$ compiler directive. These
are currently ignored in semantics, but we should recognize
more directive forms to facilitate testing. In due course,
these placeholding directive parsers will be replaced.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84077
Old-style C /*comments*/ are omitted from preprocessor directive
token sequences by the prescanner, but line-ending C++ and Fortran
free-form comments are not since their handling might depend on
the directive. Add code to skip these line-ending comments as
appropriate in place of existing code that just skipped blanks.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84061
Anonymous Fortran unit files (e.g., "./fort.7") need to be created
O_RDWR so that they can be written, rewound, and read. Other
files opened with no ACTION= specifier need to set read/write
permissions based on the file, if it exists.
Reviewed By: sscalpone
Differential Revision: https://reviews.llvm.org/D84063
BeginInternalListInput and BeginInternalListOutput were missing
from the I/O API implementation; add them.
Reviewed By: PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84066
Summary:
These link dependencies are required for shared library builds to
work correctly.
Reviewers: clementval
Reviewed By: clementval
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83938
Summary:
This adds missing definitions for functions in the Lower directory
that were causing failures in shared library builds.
The definitions for these are taken from the fir-dev branch on github.
Reviewers: sscalpone, schweitz, jeanPerier, klausler
Reviewed By: schweitz
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83771
Summary:
This patch enhances parser support for taskwait construct to OpenMP 5.0.
2.17.5 taskwait Construct
!$omp taskwait [clause[ [,] clause] ... ]
where clause is one of the following:
depend([depend-modifier,]dependence-type : locator-list)
The patch includes code changes and testcase modifications.
Reviewed By: Valentin Clement, Kiran Chandramohan
Differential Revision: https://reviews.llvm.org/D82255
peter klausler