llvm statistics are currently printed when the destructor of a "static
ManagedStatic<StatisticInfo> StatInfo" in llvm runs. This destructor
currently runs in each case as part of llvm_shutdown() which is run even
in disable_free mode as part of main(). I assume that this hasn't always
been the case.
Removing the special code here avoids the statistics getting printed
twice.
Differential Revision: http://reviews.llvm.org/D21338
llvm-svn: 272820
classes.
MSVC actively uses unqualified lookup in dependent bases, lookup at the
instantiation point (non-dependent names may be resolved on things
declared later) etc. and all this stuff is the main cause of
incompatibility between clang and MSVC.
Clang tries to emulate MSVC behavior but it may fail in many cases.
clang could store lexed tokens for member functions definitions within
ClassTemplateDecl for later parsing during template instantiation.
It will allow resolving many possible issues with lookup in dependent
base classes and removing many already existing MSVC-specific
hacks/workarounds from the clang code.
llvm-svn: 272774
Summary:
The patch contains the parsing and sema support for the `from` clause.
Patch based on the original post by Kelvin Li.
Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D18488
llvm-svn: 270882
Summary:
The patch contains the parsing and sema support for the `to` clause.
Patch based on the original post by Kelvin Li.
Reviewers: carlo.bertolli, hfinkel, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D18597
llvm-svn: 270880
Summary:
This patch is to add parsing and sema support for `target update` directive. Support for the `to` and `from` clauses will be added by a different patch. This patch also adds support for other clauses that are already implemented upstream and apply to `target update`, e.g. `device` and `if`.
This patch is based on the original post by Kelvin Li.
Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D15944
llvm-svn: 270878
This patch corresponds to reviews:
http://reviews.llvm.org/D15120http://reviews.llvm.org/D19125
It adds support for the __float128 keyword, literals and target feature to
enable it. Based on the latter of the two aforementioned reviews, this feature
is enabled on Linux on i386/X86 as well as SystemZ.
This is also the second attempt in commiting this feature. The first attempt
did not enable it on required platforms which caused failures when compiling
type_traits with -std=gnu++11.
If you see failures with compiling this header on your platform after this
commit, it is likely that your platform needs to have this feature enabled.
llvm-svn: 268898
This fixes dead store warnings of the type "dead assignment" reported
by CLang Static Analyzer on the following file:
- tools/c-index-test/c-index-test.c.
Patch by Apelete Seketeli <apelete@seketeli.net>!
Differential Revision: http://reviews.llvm.org/D19831
llvm-svn: 268453
Summary:
I have exposed the following function through libclang and the clang.cindex python bindings:
clang_CXXConstructor_isConvertingConstructor,
clang_CXXConstructor_isCopyConstructor,
clang_CXXConstructor_isDefaultConstructor,
clang_CXXConstructor_isMoveConstructor,
clang_CXXMethod_isDefaulted
I need (some of) these methods for a C++ code model I am building in Python to drive a code generator.
Reviewers: compnerd, skalinichev
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D15469
llvm-svn: 267706
Currently, clang-cl always uses Windows style for unquoting, and clang always
uses POSIX style for unquoting.
With this flag, it's possible to change these defaults.
In general, response file quoting should match the shell the response file is
used in. On Windows, it's possible to run clang-cl in a bash shell, or clang in
cmd.exe, so a flag for overriding the default behavior is natural there.
On non-Windows, Windows quoting probably never makes sense (except maybe in
Wine), but having clang-cl behave differently based on the host OS seems
strange too. So require that people who want to use posix-style response
files with clang-cl on non-Windows pass --rsp-quoting=posix.
http://reviews.llvm.org/D19425
llvm-svn: 267474
Summary:
https://llvm.org/bugs/show_bug.cgi?id=27396
This fixes an issue in response files where "\r\n" was being interpreted
as two EOL markers (i.e. we consumed the '\r' as terminating the
previous token, and then parsed the '\n' as a significant EOL). This
breaks response files where joined arguments get split across multiple
lines (like "-x\r\nc"). I also fixed an accidental issue in the
response-file.c test, where the response file is appended to, instead of
being overwritten.
Reviewers: rnk
Subscribers: danalbert, llvm-commits
Differential Revision: http://reviews.llvm.org/D19289
llvm-svn: 266840
This patch changes the default DWARF version for cc1as from invalid 0 to 2,
which should be the lowest common denominator on all platforms.
rdar://problem/24735813
llvm-svn: 266814
Since this patch provided support for the __float128 type but disabled it
on all platforms by default, some platforms can't compile type_traits with
-std=gnu++11 since there is a specialization with __float128.
This reverts the patch until D19125 is approved (i.e. we know which platforms
need this support enabled).
llvm-svn: 266460
This doesn't seem to need to be a C type, C only handles a void*, so use
new/delete as usual to simplify allocation and cleanup.
Follow-up to r265994
llvm-svn: 266222
This patch corresponds to review:
http://reviews.llvm.org/D15120
It adds support for the __float128 keyword, literals and a target feature to
enable it. This support is disabled by default on all targets and any target
that has support for this type is free to add it.
Based on feedback that I've received from target maintainers, this appears to
be the right thing for most targets. I have not heard from the maintainers of
X86 which I believe supports this type. I will subsequently investigate the
impact of enabling this on X86.
llvm-svn: 266186
Putting OpenCLImageTypes.def to clangAST library violates layering requirement: "It's not OK for a Basic/ header to include an AST/ header".
This fixes the modules build.
Differential revision: http://reviews.llvm.org/D18954
Reviewers: Richard Smith, Vassil Vassilev.
llvm-svn: 266180
This is re-landing r260742. I've reworked the conditionals so that it only hits when targeting Apple platforms with ld64.
Original Summary:
With this change generating clang order files using dtrace uses the following workflow:
cmake <whatever options you want>
ninja generate-order-file
ninja clang
This patch works by setting a default path to the order file (which can be overridden by the user). If the order file doesn't exist during configuration CMake will create an empty one.
CMake then ties up the dependencies between the clang link job and the order file, and generate-order-file overwrites CLANG_ORDER_FILE with the new order file.
llvm-svn: 265864
I. Current implementation of images is not conformant to spec in the following points:
1. It makes no distinction with respect to access qualifiers and therefore allows to use images with different access type interchangeably. The following code would compile just fine:
void write_image(write_only image2d_t img);
kernel void foo(read_only image2d_t img) { write_image(img); } // Accepted code
which is disallowed according to s6.13.14.
2. It discards access qualifier on generated code, which leads to generated code for the above example:
call void @write_image(%opencl.image2d_t* %img);
In OpenCL2.0 however we can have different calls into write_image with read_only and wite_only images.
Also generally following compiler steps have no easy way to take different path depending on the image access: linking to the right implementation of image types, performing IR opts and backend codegen differently.
3. Image types are language keywords and can't be redeclared s6.1.9, which can happen currently as they are just typedef names.
4. Default access qualifier read_only is to be added if not provided explicitly.
II. This patch corrects the above points as follows:
1. All images are encapsulated into a separate .def file that is inserted in different points where image handling is required. This avoid a lot of code repetition as all images are handled the same way in the code with no distinction of their exact type.
2. The Cartesian product of image types and image access qualifiers is added to the builtin types. This simplifies a lot handling of access type mismatch as no operations are allowed by default on distinct Builtin types. Also spec intended access qualifier as special type qualifier that are combined with an image type to form a distinct type (see statement above - images can't be created w/o access qualifiers).
3. Improves testing of images in Clang.
Author: Anastasia Stulova
Reviewers: bader, mgrang.
Subscribers: pxli168, pekka.jaaskelainen, yaxunl.
Differential Revision: http://reviews.llvm.org/D17821
llvm-svn: 265783
The CMake EXISTS operator needs to have the variable expanded. Not expanding this was causing the if statement to always be false, which made it impossible to pass linker order files in.
llvm-svn: 264757
Condense the ObjCKIND and CXXKIND options into just KIND, since the
language was already specified on a per-symbol basis and this
information was redundant. This only changes the internal
representation; naturally the libclang interface remains the same.
llvm-svn: 264423
Till now, preserve_mostcc/preserve_allcc calling convention attributes were only
available at the LLVM IR level. This patch adds attributes for
preserve_mostcc/preserve_allcc calling conventions to the C/C++ front-end.
The code was mostly written by Juergen Ributzka.
I just added support for the AArch64 target and tests.
Differential Revision: http://reviews.llvm.org/D18025
llvm-svn: 263647
Clauses with post-update expressions always have pre-init statement. So
OMPClauseWithPreInit now is the base for OMPClauseWithPostUpdate.
llvm-svn: 262696
This is a sad workaround for the lack of plugin support in libclang. Depends
on D17807, a tools-extra change that also contains the test case.
This is designed to be easy to remove again if libclang ever grows proper
plugin support.
Differential Revision: http://reviews.llvm.org/D17808
llvm-svn: 262596
Add parsing, sema analysis and serialization/deserialization for 'declare reduction' construct.
User-defined reductions are defined as
#pragma omp declare reduction( reduction-identifier : typename-list : combiner ) [initializer ( initializer-expr )]
These custom reductions may be used in 'reduction' clauses of OpenMP constructs. The combiner specifies how partial results can be combined into a single value. The
combiner can use the special variable identifiers omp_in and omp_out that are of the type of the variables being reduced with this reduction-identifier. Each of them will
denote one of the values to be combined before executing the combiner. It is assumed that the special omp_out identifier will refer to the storage that holds the resulting
combined value after executing the combiner.
As the initializer-expr value of a user-defined reduction is not known a priori the initializer-clause can be used to specify one. Then the contents of the initializer-clause
will be used as the initializer for private copies of reduction list items where the omp_priv identifier will refer to the storage to be initialized. The special identifier
omp_orig can also appear in the initializer-clause and it will refer to the storage of the original variable to be reduced.
Differential Revision: http://reviews.llvm.org/D11182
llvm-svn: 262582
This is like r262493, but for pragma detect_mismatch instead of pragma comment.
The two pragmas have similar behavior, so use the same approach for both.
llvm-svn: 262506
`#pragma comment` was handled by Sema calling a function on ASTConsumer, and
CodeGen then implementing this function and writing things to its output.
Instead, introduce a PragmaCommentDecl AST node and hang one off the
TranslationUnitDecl for every `#pragma comment` line, and then use the regular
serialization machinery. (Since PragmaCommentDecl has codegen relevance, it's
eagerly deserialized.)
http://reviews.llvm.org/D17799
llvm-svn: 262493
Matthias Braun