Use result_type for the IMPLICIT_DEF in masked vector patterns.
This doesn't matter today because result_type and op_type are
always the same.
Use multiclass inheritance to reduce repeated code.
This patch supports all of the current set of VP integer binary
intrinsics by lowering them to to RVV instructions. It does so by using
the existing RISCVISD *_VL custom nodes as an intermediate layer. Both
scalable and fixed-length vectors are supported by using this method.
One notable change to the existing vector codegen strategy is that
scalable all-ones and all-zeros mask SPLAT_VECTORs are now lowered to
RISCVISD VMSET_VL and VMCLR_VL nodes to match their fixed-length
BUILD_VECTOR counterparts. This allows them to reuse the existing
"all-ones" VL patterns.
To reduce the size of the phabricator diff, some tests are intentionally
left out and will be added later if the patch is accepted.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101826
This shrinks the immediate that isel table needs to emit for these
instructions. Hoping this allows me to change OPC_EmitInteger to
use a better variable length encoding for representing negative
numbers. Similar to what was done a few months ago for OPC_CheckInteger.
The alternative encoding uses less bytes for negative numbers, but
increases the number of bytes need to encode 64 which was a very
common number in the RISCV table due to SEW=64. By using Log2 this
becomes 6 and is no longer a problem.
This patch adds support for both scalable- and fixed-length vector code
lowering of the llvm.minnum and llvm.maxnum intrinsics to the equivalent
RVV instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101035
This patch adds more optimized codegen for the above SETCC forms,
by matching the '.vi' vector forms when the immediate is a 5-bit signed
immediate plus 1. The immediate can be decremented and the corresponding
SET[U]LE or SET[U]GT forms can be matched.
This work was left as a TODO from D94168.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100096
I've included tests that require type legalization to split the
vector. The i64 version of these scalarizes on RV32 due to type
legalization visiting the result before the vector type. So we
have to abort our custom expansion to avoid creating target
specific nodes with an illegal type. Then type legalization ends
up scalarizing. We might be able to fix this by doing custom
splitting for large vectors in our handler to get down to a legal
type.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98102
This patch fixes up one case where the fixed-length-vector VL was
dropped (falling back to VLMAX) when inserting vector elements, as the
code would lower via ISD::INSERT_VECTOR_ELT (at index 0) which loses the
fixed-length vector information.
To this end, a custom node, VMV_S_XF_VL, was introduced to carry the VL
operand through to the final instruction. This node wraps the RVV
vmv.s.x and vmv.s.f instructions, which were being selected by
insert_vector_elt anyway.
There should be no observable difference in scalable-vector codegen.
There is still one outstanding drop from fixed-length VL to VLMAX, when
an i64 element is inserted into a vector on RV32; the splat (which is
custom legalized) has no notion of the original fixed-length vector
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97842
This patch extends the support for vector FP_ROUND and FP_EXTEND by
including support for fixed-length vector types. Since fixed-length
vectors use "VL" nodes and scalable vectors can use the standard nodes,
there is slightly more to do in the fixed-length case. A helper function
was introduced to try and reduce the divergent paths. It is expected
that this function will similarly come in useful for lowering the
int-to-fp and fp-to-int operations for fixed-length vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97301
This patch extends support for our custom-lowering of scalable-vector
truncates to include those of fixed-length vectors. It does this by
co-opting the custom RISCVISD::TRUNCATE_VECTOR node and adding mask and
VL operands. This avoids unnecessary duplication of patterns and
inflation of the ISel table.
Some truncates go through CONCAT_VECTORS which currently isn't
efficiently handled, as it goes through the stack. This can be improved
upon in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97202
The patterns mostly follow the scalar counterparts, save for some extra
optimizations to match the vector/scalar forms.
The patch adds a DAGCombine for ISD::FCOPYSIGN to try and reorder
ISD::FNEG around any ISD::FP_EXTEND or ISD::FP_TRUNC of the second
operand. This helps us achieve better codegen to match vfsgnjn.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96028
This is annoying because the condition code legalization belongs
to LegalizeDAG, but our custom handler runs in Legalize vector ops
which occurs earlier.
This adds some of the mask binary operations so that we can combine
multiple compares that we need for expansion.
I've also fixed up RISCVISelDAGToDAG.cpp to handle copies of masks.
This patch contains a subset of the integer setcc patch as well.
That patch is dependent on the integer binary ops patch. I'll rebase
based on what order the patches go in.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96567
This patch prepares the RISCV VSLIDEUP and VSLIDEDOWN custom nodes to
ones carrying additional mask and vector-length operands. This is
primarily so they can be used by both systems.
This also takes the opportunity to create some helper functions to deal
with the common task of getting the default (unmasked) VL operands.
Reviewed By: craig.topper, arcbbb
Differential Revision: https://reviews.llvm.org/D96505
Unlike scalable vectors, I'm only using a ComplexPattern for
the immediate itself. The vmv_v_x is matched explicitly. We igore
the VL argument when matching a binary operator, but we do check
it when matching splat directly.
I left out tests for vXi64 as they fail on rv32 right now.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96365
This patch optimizes a build_vector "index sequence" and lowers it to
the existing custom RISCVISD::VID node. This pattern is common in
autovectorized code.
The custom node was updated to allow it to be used by both scalable and
fixed-length vectors, thus avoiding pattern duplication.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96332
In vector v0.10, there are whole vector register load/store
instructions. I suggest to use the whole register load/store
instructions for generic load/store for scalable vector types. It could
save up vset{i}vl{i} for these load/store.
For fractional LMUL, I keep to use vle{eew}.v/vse{eew}.v instructions to
load/store partial vector registers.
Differential Revision: https://reviews.llvm.org/D95853
This adds support for commuting operands and converting between
vfmadd and vfmacc to avoid register copies.
To avoid messing up intrinsic behavior, I've added new pseudo
instructions that have the isCommutable flag set. These pseudos also
force a tail agnostic policy. The intrinsic version still use
the tail undisturbed policy.
For best results it looks like we need to start with fmadd and only
pick fmacc if its beneficial. MachineCSE commutes without contraining
the operands and then commutes back if it didn't help with CSE. So
I've made sure that when the operand choice isn't constrained, we
will keep fmadd for MachineCSE and when it does the second commute,
we get back the original instruction.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D95800
This ensures that we'll match immediates consistently regardless
of whether we match them as a standalone splat or as part of
another operation.
While I was there I added complexities to the simm5/uimm5 patterns so
we didn't have to assume that the 1 on the non-immediate was lower
than what tablegen inferred.
I had to make a minor tweak to tablegen to fix one place that
didn't expect to see a ComplexPattern that wasn't a "leaf".
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96199
This patch adds support for both the fadd reduction intrinsic, in both
the ordered and unordered modes.
The fmin and fmax intrinsics are not currently supported due to a
discrepancy between the LLVM semantics and the RVV ISA behaviour with
regards to signaling NaNs. This behaviour is likely fixed in version 2.3
of the RISC-V F/D/Q extension, but until then the intrinsics can be left
unsupported.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95870
This patch adds support for the integer reduction intrinsics supported
by RVV. This excludes "mul" which has no corresponding instruction.
The reduction instructions in RVV have slightly complicated type
constraints given they always produce a single "M1" vector register.
They are lowered to custom nodes including the second "scalar" reduction
operand to simplify the patterns and in the hope that they can be useful
for future DAG combines.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95620
This patch custom-legalizes all integer EXTRACT_VECTOR_ELT nodes where
SEW < XLEN to VMV_S_X nodes to help the compiler infer sign bits from
the result. This allows us to eliminate redundant sign extensions.
For parity, all integer EXTRACT_VECTOR_ELT nodes are legalized this way
so that we don't need TableGen patterns for some and not others.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95741
This patch adds support for lowering the sqrt intrinsic to the RVV
vfsqrt instruction.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96012
Due to a clerical error, the sdiv operation was mapping to vdivu and
udiv to vdiv, when the opposite mapping is the correct one.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95869
A follow up patch will add support for commuting operands or
changing opcode to vfmacc and friends.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D95662
This patch adds support for the full range of vector int-to-float,
float-to-int, and float-to-float conversions on legal types.
Many conversions are supported natively in RVV so are lowered with
patterns. These include conversions between (element) types of the same
size, and those that are half/double the size of the input. When
conversions take place between types that are less than half or more
than double the size we must lower them using sequences of instructions
which go via intermediate types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95447
Move the Suffix string into the VTypeInfo class so we don't need a helper class to get to it.
Adjust pseudo naming scheme for FPRs to put F16/F32/F64 in
place of F in the pseudo instruction name rather than as a suffix.
This avoids special cases like VFMERGE from the original patch.
Differential Revision: https://reviews.llvm.org/D95404
When spilling, the spill size will depend on the size of register class.
For .vf vector instructions, it may spill the floating point scalar
argument. In order to use the correct load/store instructions for
spilling, we need to provide the correct floating point register class
for the .vf vector pseudo instructions.
In this commit, we define the .vf pseudo instructions as three
different kinds of pseudo instructions for half/float/double. For
example, PseudoVFADD_M1 will become as PseudoVFADD_F16_M1,
PseudoVFADD_F32_M1, and PseudoVFADD_F64_M1.
Differential Revision: https://reviews.llvm.org/D95234
Original patch by @rogfer01.
This patch adds support for insertelt and extractelt operations on
scalable vectors.
Special care must be taken on RV32 when dealing with i64 vectors as
there are no straightforward ways to insert a 64-bit element without a
register of that size. To that end, both are custom-lowered to different
sequences.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94615
This patch factors out the "VLMax" operand passed to most
scalable-vector ISel patterns into a property of each VType.
This is seen as a preparatory change to allow RVV in the future to
more easily support fixed-length vector types with constrained vector
lengths, with the AVL operand set to the length of the fixed-length
vector. It has no effect on the scalable code generation path.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94594
Original patch by @rogfer01.
This patch supports vector truncates, which on RVV must be done in a
series of instructions truncating by one power-of-two at a time. This is
done through custom-lowering and a custom node to avoid LLVM
re-combining the split TRUNCATE nodes.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94796
Original patch by @rogfer01.
This patch adds ISel patterns for the above operations to the
corresponding vector/vector and vector/scalar RVV instructions, as well
as extra patterns to match operand-swapped scalar/vector vfrsub and
vfrdiv.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94408
Original patch by @rogfer01.
All ordered comparisons except ONE are supported natively, and all
unordered comparisons except UNE are expanded into sequences involving
explicit NaN checks and mask arithmetic.
Additionally, we expand GT,OGT,GE,OGE to their swapped-operand versions, and
pattern-match those back to the "original", swapping operands once more. This
way we catch both operations and both "vf" and "fv" forms with fewer patterns.
Also add support for floating-point splat_vector, with an optimization for
splatting fpimm0.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94242
Original patch by @rogfer01.
The RVV integer comparison instructions are defined in such a way that
many LLVM operations are defined by using the "opposite" comparison
instruction and swapping the operands. This is done in this patch in
most cases, except for the mappings where the immediate range must be
adjusted to accomodate:
va < i --> vmsle{u}.vi vd, va, i-1, vm
va >= i --> vmsgt{u}.vi vd, va, i-1, vm
That is left for future optimization; this patch supports all operations
but in the case of the missing mappings the immediate will be moved to
a scalar register first.
Since there are so many condition codes and operand cases to check, it
was decided to reduce the test burden by only testing the "vscale x 8"
vector types.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94168
The TableGen immAllOnesV and immAllZerosV helpers implicitly wrapped the
ISD::isBuildVectorAll(Ones|Zeros) helper functions. This was inhibiting
their use for targets such as RISC-V which use ISD::SPLAT_VECTOR. In
particular, RISC-V had to define its own 'vnot' fragment.
In order to extend the scope of these nodes to include support for
ISD::SPLAT_VECTOR, two new ISD predicate functions have been introduced:
ISD::isConstantSplatVectorAll(Ones|Zeros). These effectively supersede
the older "isBuildVector" predicates, which are now simple wrappers for
the new functions. They pass a defaulted boolean toggle which preserves
the old behaviour. It is hoped that in time all call-sites can be ported
to the "isConstantSplatVector" functions.
While the use of ISD::isBuildVectorAll(Ones|Zeros) has not changed, the
behaviour of the TableGen immAll(Ones|Zeros)V **has**. To test the new
functionality, the custom RISC-V TableGen fragment has been removed and
replaced with the built-in 'vnot'. To test their use as pattern-roots, two
splat patterns have been updated accordingly.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94223
Craig Topper