Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Following the suggestion in D59450, I'm moving the code for constructing
a ConstantRange from KnownBits out of ValueTracking, which also allows us
to test this code independently.
I'm adding this method to ConstantRange rather than KnownBits (which
would have been a bit nicer API wise) to avoid creating a dependency
from Support to IR, where ConstantRange lives.
Differential Revision: https://reviews.llvm.org/D59475
llvm-svn: 356339
TimePassesHandler object (implementation of time-passes for new pass manager)
gains ability to report into a stream customizable per-instance (per pipeline).
Intended use is to specify separate time-passes output stream per each compilation,
setting up TimePasses member of StandardInstrumentation during PassBuilder setup.
That allows to get independent non-overlapping pass-times reports for parallel
independent compilations (in JIT-like setups).
By default it still puts timing reports into the info-output-file stream
(created by CreateInfoOutputFile every time report is requested).
Unit-test added for non-default case, and it also allowed to discover that print() does not work
as declared - it did not reset the timers, leading to yet another report being printed into the default stream.
Fixed print() to actually reset timers according to what was declared in print's comments before.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59366
llvm-svn: 356305
Add functions to ConstantRange that determine whether the
unsigned/signed addition/subtraction of two ConstantRanges
may/always/never overflows. This will allow checking overflow
conditions based on known constant ranges in addition to known bits.
I'm implementing these methods on ConstantRange to allow them to be
unit tested independently of any ValueTracking machinery. The tests
include exhaustive testing on 4-bit ranges, to make sure the result
is both conservatively correct and maximally precise.
The OverflowResult enum is redeclared on ConstantRange, because
I wanted to avoid a dependency in either direction between
ValueTracking.h and ConstantRange.h.
Differential Revision: https://reviews.llvm.org/D59193
llvm-svn: 356276
Summary:
Now that endian types support enumerations (D59141), the existing yaml
support for them is somewhat insufficient. The current solution was to
define the ScalarTraits class for these types, which always forwards to
the ScalarTraits of the underlying type. However, the enum types will
usually have ScalarEnumerationTraits of ScalarBitsetTraits.
In this patch I add the two extra Traits types to the endian types. In
order to properly SFINAE-ize them, I've also added an extra "Enable"
template argument to the Traits template classes.
Reviewers: zturner, sammccall
Subscribers: kristina, Bigcheese, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59289
llvm-svn: 356269
Windows command line argument processing treats consecutive double quotes
as a single double-quote. This patch implements this functionality.
Differential Revision: https://reviews.llvm.org/D58662
llvm-svn: 356193
Summary:
The way c++ template argument deduction works, both arguments are used
to deduce the template type in the three-argument overload of
mapOptional. This is a problem if the types are slightly different, even
if they are implicitly convertible. This is fairly easy to trigger with
integral types, as the default type of most integral constants is int,
which then requires casting the constant to the type of the other
argument.
This patch fixes that by using a separate template type for the default
value, which is then cast to the type of the first argument. To avoid
this conversion triggerring conversions marged as explicit, we use
static_assert to check that the types are implicitly convertible.
Reviewers: zturner, sammccall
Subscribers: kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59142
llvm-svn: 356157
Summary:
Add hooks for determining the policy used to decide whether/how
to chop off symbol 'suffixes' when locating a given function
in a sample profile.
Prior to this change, any function symbols of the form "X.Y" were
elided/truncated into just "X" when looking up things in a sample
profile data file.
With this change, the policy on suffixes can be changed by adding a
new attribute "sample-profile-suffix-elision-policy" to the function:
this attribute can have the value "all" (the default), "selected", or
"none". A value of "all" preserves the previous behavior (chop off
everything after the first "." character, then treat that as the
symbol name). A value of "selected" chops off only the rightmost
".llvm.XXXX" suffix (where "XXX" is any string not containing a "."
char). A value of "none" indicates that names should be left as is.
Subscribers: jdoerfert, wmi, mtrofin, danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58832
llvm-svn: 356146
Summary:
MsgPackTypes has been replaced by the lighter-weight MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57025
Change-Id: Ia7069880ef29f55490abbe5d8ae15f25cc1490a4
llvm-svn: 356082
Summary:
A class that exposes a simple in-memory representation of a document of
MsgPack objects, that can be read from and written to MsgPack, read from
and written to YAML, and inspected and modified in memory. This is
intended to be a lighter-weight (in terms of memory allocations)
replacement for MsgPackTypes.
Two subsequent changes will:
1. switch AMDGPU HSA metadata to using MsgPackDocument instead of
MsgPackTypes;
2. add MsgPack AMDGPU PAL metadata via MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57023
Change-Id: Ie15a054831d5a6467c5867c064c8f8f6b80270e1
llvm-svn: 356080
Summary:
AIX compilers define macros based on the version of the operating
system.
This patch implements updating of versionless AIX triples to include the
host AIX version. Also, the host triple detection in the build system is
adjusted to strip the AIX version information so that the run-time
detection is preferred.
Reviewers: xingxue, stefanp, nemanjai, jasonliu
Reviewed By: xingxue
Subscribers: mgorny, kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58798
llvm-svn: 355995
This patch adds an XCOFF triple object format type into LLVM.
This XCOFF triple object file type will be used later by object file and assembly generation for the AIX platform.
Differential Revision: https://reviews.llvm.org/D58930
llvm-svn: 355989
Summary:
Extract the functionality of eliminating unreachable basic blocks
within a function, previously encapsulated within the
-unreachableblockelim pass, and make it available as a function within
BlockUtils.h. No functional change intended other than making the logic
reusable.
Exposing this logic makes it easier to implement
https://reviews.llvm.org/D59068, which fixes coroutines bug
https://bugs.llvm.org/show_bug.cgi?id=40979.
Reviewers: mkazantsev, wmi, davidxl, silvas, davide
Reviewed By: davide
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59069
llvm-svn: 355846
Summary:
Binary formats often include various enumerations or bitsets, but using
endian-specific types for accessing them is tricky because they
currently only support integral types. This is particularly true for
scoped enums (enum class), as these are not implicitly convertible to
integral types, and so one has to perform two casts just to read the
enum value.
This fixes that support by adding first-class support for enumeration
types to endian-specific types. The support for them was already almost
working -- all I needed to do was overload getSwappedBytes for
enumeration types (which casts the enum to its underlying type and performs the
conversion there). I also add some convenience template aliases to simplify
declaring endian-specific enums.
Reviewers: Bigcheese, zturner
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59141
llvm-svn: 355812
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355685
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
Getting rid of the name "optimization remarks" for anything that
involves handling remarks on the client side.
It's safer to do this now, before we get stuck with that name in all the
APIs and public interfaces we decide to export to users in the future.
This renames llvm/tools/opt-remarks to llvm/tools/remarks-shlib, and now
generates `libRemarks.dylib` instead of `libOptRemarks.dylib`.
Differential Revision: https://reviews.llvm.org/D58535
llvm-svn: 355439
These arrays are both keyed by CPU name and go into the same tablegenerated file. Merge them so we only need to store keys once.
This also removes a weird space saving quirk where we used the ProcDesc.size() to create to build an ArrayRef for ProcSched.
Differential Revision: https://reviews.llvm.org/D58939
llvm-svn: 355431
We have two sources of known bits:
1. For adds leading ones of either operand are preserved. For sub
leading zeros of LHS and leading ones of RHS become leading zeros in
the result.
2. The saturating math is a select between add/sub and an all-ones/
zero value. As such we can carry out the add/sub known bits
calculation, and only preseve the known one/zero bits respectively.
Differential Revision: https://reviews.llvm.org/D58329
llvm-svn: 355223
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
If an option, which requires a value, has a `cl::Grouping` formatting
modifier, it works well as far as it is used at the end of a group,
or as a separate argument. However, if the option appears accidentally
in the middle of a group, the program just crashes. This patch prints
an error message instead.
Differential Revision: https://reviews.llvm.org/D58499
llvm-svn: 355184
Part 2 of CSPGO changes (mostly related to ProfileSummary).
Note that I use a default parameter in setProfileSummary() and getSummary().
This is to break the dependency in clang. I will make the parameter explicit
after changing clang in a separated patch.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355131
OptBisect is in IR due to LLVMContext using it. However, it uses IR units from
Analysis as well. This change moves getDescription functions from OptBisect
to their respective IR units. Generating names for IR units will now be up
to the callers, keeping the Analysis IR units in Analysis. To prevent
unnecessary string generation, isEnabled function is added so that callers know
when the description needs to be generated.
Differential Revision: https://reviews.llvm.org/D58406
llvm-svn: 355068
This patch introduces Memory::MF_HUGE_HINT which indicates that allocateMappedMemory() shall return a pointer to a large memory page.
However the flag is a hint because we're not guaranteed in any way that we will get back a large memory page. There are several restrictions:
- Large/huge memory pages aren't enabled by default on modern OSes (Windows 10 and Linux at least), and should be manually enabled/reserved.
- Once enabled, it should be kept in mind that large pages are physical only, they can't be swapped.
- Memory fragmentation can affect the availability of large pages, especially after running the OS for a long time and/or running along many other applications.
Memory::allocateMappedMemory() will fallback to 4KB pages if it can't allocate 2MB large pages (if Memory::MF_HUGE_HINT is provided)
Currently, Memory::MF_HUGE_HINT only works on Windows. The hint will be ignored on Linux, 4KB pages will always be returned.
Differential Revision: https://reviews.llvm.org/D58718
llvm-svn: 355065
Summary:
The original assumption for the insertDef method was that it would not
materialize Defs out of no-where, hence it will not insert phis needed
after inserting a Def.
However, when cloning an instruction (use case used in LICM), we do
materialize Defs "out of no-where". If the block receiving a Def has at
least one other Def, then no processing is needed. If the block just
received its first Def, we must check where Phi placement is needed.
The only new usage of insertDef is in LICM, hence the trigger for the bug.
But the original goal of the method also fails to apply for the move()
method. If we move a Def from the entry point of a diamond to either the
left or right blocks, then the merge block must add a phi.
While this usecase does not currently occur, or may be viewed as an
incorrect transformation, MSSA must behave corectly given the scenario.
Resolves PR40749 and PR40754.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58652
llvm-svn: 355040
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
DWARFFormValues can be created from a data extractor or by passing its
value directly. Until now this was done by member functions that
modified an existing object's internal state. This patch replaces a
subset of these methods with static method that return a new
DWARFFormValue.
llvm-svn: 354941
Summary:
Prior to r310876 one of our out-of-tree targets was enabling IPRA by modifying
the TargetOptions::EnableIPRA. This no longer works on current trunk since the
useIPRA() hook overrides any values that are set in advance. This patch adjusts
the behaviour of the hook so that API users and useIPRA() can both enable it
but useIPRA() cannot disable it if the API user already enabled it.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: wdng, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38043
llvm-svn: 354692
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
llvm-svn: 354669
Summary:
Following on from the review for D58088, this patch provides the
prerequisite to_address() implementation that's needed to have
pointer_iterator support unique_ptr.
The late bound return should be removed once we move to C++14 to better
align with the C++20 declaration. Also, this implementation can be removed
once we move to C++20 where it's defined as std::to_addres()
The std::pointer_traits<>::to_address(p) variations of these overloads has
not been implemented.
Reviewers: dblaikie, paquette
Reviewed By: dblaikie
Subscribers: dexonsmith, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58421
llvm-svn: 354491
This is a follow-up to r354246 and a reimplementation of https://reviews.llvm.org/D57097?id=186600
that should not trigger any UB thanks to the use of an union.
This may still be subject to the problem solved by std::launder, but I'm unsure how it interacts whith union.
/me plans to revert if this triggers any relevant bot failure. At least this validates in Release mode with
clang 6.0.1 and gcc 4.8.5.
llvm-svn: 354264
and
r354055 "Optional specialization for trivially copyable types, part2"
These are suspected to cause Clang to get miscompiled on Ubuntu 14.04
(Trusty) which uses GCC 4.8.4. Reverting for an hour to see if this
helps. See llvm-commits thread.
> Recommit Optional specialization for trivially copyable types
>
> Unfortunately the original code gets misscompiled by GCC (at least 8.1),
> this is a tentative workaround using std::memcpy instead of inplace new
> for trivially copyable types. I'll revert if it breaks.
>
> Original revision: https://reviews.llvm.org/D57097
llvm-svn: 354126
Unfortunately the original code gets misscompiled by GCC (at least 8.1),
this is a tentative workaround using std::memcpy instead of inplace new
for trivially copyable types. I'll revert if it breaks.
Original revision: https://reviews.llvm.org/D57097
llvm-svn: 354051
This reverts commit r351091.
The original mac breakages are addressed by ensuring the root directory
we're working from is fully symlink-resolved before starting.
Differential Revision: https://reviews.llvm.org/D58169
llvm-svn: 354026
Specialization of Optional for trivially copyable types yields failure on the buildbots I fail to reproduce locally.
Better safe than sorry, reverting.
llvm-svn: 353982
Make llvm::Optional<T> trivially copyable when T is trivially copyable
This is an ever-recurring issue (see https://bugs.llvm.org/show_bug.cgi?id=39427 and https://bugs.llvm.org/show_bug.cgi?id=35978)
but I believe that thanks to https://reviews.llvm.org/D54472 we can now ship a decent implementation of this.
Basically the fact that llvm::is_trivially_copyable has a consistent behavior across compilers should prevent any ABI issue,
and using in-place new instead of memcpy should keep compiler bugs away.
This patch is slightly different from the original revision https://reviews.llvm.org/rL353927 but achieves the same goal. It just avoids
going through std::conditional which may the code more explicit.
llvm-svn: 353962
Add plumbing to get MemorySSA in the remaining loop passes.
Also update unit test to add the dependency.
[EnableMSSALoopDependency remains disabled].
llvm-svn: 353901
When CodeExtractor saves the result of InvokeInst at the first insertion
point of the 'normal destination' basic block, this block can be omitted
in the outlined region, so store is placed outside of the function. The
suggested solution is to process saving outputs after creating exit
stubs for new function, and stores will be placed in that blocks before
return in this case.
Patch by Sergei Kachkov!
Fixes llvm.org/PR40455.
Differential Revision: https://reviews.llvm.org/D57919
llvm-svn: 353562
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
llvm-svn: 353265
A fallible iterator is one whose increment or decrement operations may fail.
This would usually be supported by replacing the ++ and -- operators with
methods that return error:
class MyFallibleIterator {
public:
// ...
Error inc();
Errro dec();
// ...
};
The downside of this style is that it no longer conforms to the C++ iterator
concept, and can not make use of standard algorithms and features such as
range-based for loops.
The fallible_iterator wrapper takes an iterator written in the style above
and adapts it to (mostly) conform with the C++ iterator concept. It does this
by providing standard ++ and -- operator implementations, returning any errors
generated via a side channel (an Error reference passed into the wrapper at
construction time), and immediately jumping the iterator to a known 'end'
value upon error. It also marks the Error as checked any time an iterator is
compared with a known end value and found to be inequal, allowing early exit
from loops without redundant error checking*.
Usage looks like:
MyFallibleIterator I = ..., E = ...;
Error Err = Error::success();
for (auto &Elem : make_fallible_range(I, E, Err)) {
// Loop body is only entered when safe.
// Early exits from loop body permitted without checking Err.
if (SomeCondition)
return;
}
if (Err)
// Handle error.
* Since failure causes a fallible iterator to jump to end, testing that a
fallible iterator is not an end value implicitly verifies that the error is a
success value, and so is equivalent to an error check.
Reviewers: dblaikie, rupprecht
Subscribers: mgorny, dexonsmith, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57618
llvm-svn: 353237
Summary:
Add support for options that always prefix their value, giving an error
if the value is in the next argument or if the option is given a value
assignment (ie. opt=val). This is the desired behavior for the -D option
of FileCheck for instance.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions and introduced when creating
D56549)
Reviewers: jdenny
Subscribers: llvm-commits, probinson, kristina, hiraditya,
JonChesterfield
Differential Revision: https://reviews.llvm.org/D56549
llvm-svn: 353172
This fixes two problems with CSE done in buildConstant. First, this
would hit an assert when used with a vector result type. Solve this by
allowing CSE on the vector elements, but not on the result vector for
now.
Second, this was also performing the CSE based on the input
ConstantInt pointer. The underlying buildConstant could potentially
convert the constant depending on the result type, giving in a
different ConstantInt*. Stop allowing the APInt and ConstantInt forms
from automatically casting to the result type to avoid any similar
problems in the future.
llvm-svn: 353077
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all InvokeInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57171
llvm-svn: 352910
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
Patch https://reviews.llvm.org/D56329 caused build failures for me when
building on Windows because of the use of cmake operator
'VERSION_GREATER_EQUAL' which isn't supported in older versions of cmake. The
llvm website states that minimum required version of cmake for building llvm is
3.4.3 https://llvm.org/docs/CMake.html
Differential Revision: https://reviews.llvm.org/D57326
llvm-svn: 352378
The IR enforced limit for the address space is 24-bits, but LLT was
only using 23-bits. Additionally, the argument to the constructor was
truncating to 16-bits.
A similar problem still exists for the number of vector elements. The
IR enforces no limit, so if you try to use a vector with > 65535
elements the IRTranslator asserts in the LLT constructor.
llvm-svn: 352264
Summary:
Renamed setBaseDiscriminator to cloneWithBaseDiscriminator, to match
similar APIs. Also changed its behavior to copy over the other
discriminator components, instead of eliding them.
Renamed cloneWithDuplicationFactor to
cloneByMultiplyingDuplicationFactor, which more closely matches what
this API does.
Reviewers: dblaikie, wmi
Reviewed By: dblaikie
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D56220
llvm-svn: 351996
Summary:
Previously no client of ilist traits has needed to know about transfers
of nodes within the same list, so as an optimization, ilist doesn't call
transferNodesFromList in that case. However, now there are clients that
want to use ilist traits to cache instruction ordering information to
optimize dominance queries of instructions in the same basic block.
This change updates the existing ilist traits users to detect in-list
transfers and do nothing in that case.
After this change, we can start caching instruction ordering information
in LLVM IR data structures. There are two main ways to do that:
- by putting an order integer into the Instruction class
- by maintaining order integers in a hash table on BasicBlock
I plan to implement and measure both, but I wanted to commit this change
first to enable other out of tree ilist clients to implement this
optimization as well.
Reviewers: lattner, hfinkel, chandlerc
Subscribers: hiraditya, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D57120
llvm-svn: 351992
VPlan-native path
Context: Patch Series #2 for outer loop vectorization support in LV
using VPlan. (RFC:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
Patch series #2 checks that inner loops are still trivially lock-step
among all vector elements. Non-loop branches are blindly assumed as
divergent.
Changes here implement VPlan based predication algorithm to compute
predicates for blocks that need predication. Predicates are computed
for the VPLoop region in reverse post order. A block's predicate is
computed as OR of the masks of all incoming edges. The mask for an
incoming edge is computed as AND of predecessor block's predicate and
either predecessor's Condition bit or NOT(Condition bit) depending on
whether the edge from predecessor block to the current block is true
or false edge.
Reviewers: fhahn, rengolin, hsaito, dcaballe
Reviewed By: fhahn
Patch by Satish Guggilla, thanks!
Differential Revision: https://reviews.llvm.org/D53349
llvm-svn: 351990
This version of gcc seems to be having issues with raw literals inside macro
arguments. I change the string to use regular string literals instead.
llvm-svn: 351756
This patch introduces the field `ExpressionSize` in SCEV. This field is
calculated only once on SCEV creation, and it represents the complexity of
this SCEV from arithmetical point of view (not from the point of the number
of actual different SCEV nodes that are used in the expression). Roughly
saying, it is the number of operands and operations symbols when we print this
SCEV.
A formal definition is following: if SCEV `X` has operands
`Op1`, `Op2`, ..., `OpN`,
then
Size(X) = 1 + Size(Op1) + Size(Op2) + ... + Size(OpN).
Size of SCEVConstant and SCEVUnknown is one.
Expression size may be used as a universal way to limit SCEV transformations
for huge SCEVs. Currently, we have a bunch of options that represents various
limits (such as recursion depth limit) that may not make any sense from the
point of view of a LLVM users who is not familiar with SCEV internals, and all
these different options pursue one goal. A more general rule that may
potentially allow us to get rid of this redundancy in options is "do not make
transformations with SCEVs of huge size". It can apply to all SCEV traversals
and transformations that may need to visit a SCEV node more than once, hence
they are prone to combinatorial explosions.
This patch only introduces SCEV sizes calculation as NFC, its utilization will
be introduced in follow-up patches.
Differential Revision: https://reviews.llvm.org/D35989
Reviewed By: reames
llvm-svn: 351725
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is a follow-up to r351448. It adds support for other _*Z extensions
of the Itanium demanling, to the newly available demangle function
heuristic.
Reviewed by: erik.pilkington, rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D56855
llvm-svn: 351551
Summary:
The operators simply print the underlying value or "None".
The trickier part of this patch is making sure the streaming operators
work even in unit tests (which was my primary motivation, though I can
also see them being useful elsewhere). Since the stream operator was a
template, implicit conversions did not kick in, and our gtest glue code
was explicitly introducing an implicit conversion to make sure other
implicit conversions do not kick in :P. I resolve that by specializing
llvm_gtest::StreamSwitch for llvm:Optional<T>.
Reviewers: sammccall, dblaikie
Reviewed By: sammccall
Subscribers: mgorny, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56795
llvm-svn: 351548
This allows it to be used in an upcoming llvm-readobj change.
A small change in internal behaviour of the function is to always call
the microsoftDemangle function if the string does not have an itanium
encoding prefix, rather than only if it starts with '?'. This is
harmless because the microsoftDemangle function does the same check
already.
Reviewed by: grimar, erik.pilkington
Differential Revision: https://reviews.llvm.org/D56721
llvm-svn: 351448
Summary:
The version of make_absolute which accepted a specific directory to use
as the "base" for the computation could never fail, even though it
returned a std::error_code. The reason for that seems to be historical
-- the CWD flavour (which can fail due to failure to retrieve CWD) was
there first, and the new version was implemented by extending that.
This removes the error return value from the non-CWD overload and
reimplements the CWD version on top of that. This enables us to remove
some dead code where people were pessimistically trying to handle the
errors returned from this function.
Reviewers: zturner, sammccall
Subscribers: hiraditya, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56599
llvm-svn: 351317
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
This adds support for multilib paths for wasm32 targets, following
[Debian's Multiarch conventions], and also adds an experimental OS name in
order to test it.
[Debian's Multiarch conventions]: https://wiki.debian.org/Multiarch/
Differential Revision: https://reviews.llvm.org/D56553
llvm-svn: 351163
Summary:
Previously only one RealFileSystem instance was available, and its working
directory is shared with the process. This doesn't work well for multithreaded
programs that want to work with relative paths - the vfs::FileSystem is assumed
to provide the working directory, but a thread cannot control this exclusively.
The new vfs::createPhysicalFileSystem() factory copies the process's working
directory initially, and then allows it to be independently modified.
This implementation records the working directory path, and glues it to relative
paths to provide the correct absolute path to the sys::fs:: functions.
This will give different results in unusual situations (e.g. the CWD is moved).
The main alternative is the use of openat(), fstatat(), etc to ask the OS to
resolve paths relative to a directory handle which can be kept open. This is
more robust. There are two reasons not to do this initially:
1. these functions are not available on all supported Unixes, and are somewhere
between difficult and unavailable on Windows. So we need a path-based
fallback anyway.
2. this would mean also adding support at the llvm::sys::fs level, which is a
larger project. My clearest idea is an OS-specific `BaseDirectory` object
that can be optionally passed to functions there. Eventually this could be
backed by either paths or a fd where openat() is supported.
This is a large project, and demonstrating here that a path-based fallback
works is a useful prerequisite.
There is some subtlety to the path-manipulation mechanism:
- when setting the working directory, both Specified=makeAbsolute(path) and
Resolved=realpath(path) are recorded. These may differ in the presence of
symlinks.
- getCurrentWorkingDirectory() and makeAbsolute() use Specified - this is
similar to the behavior of $PWD and sys::path::current_path
- IO operations like openFileForRead use Resolved. This is similar to the
behavior of an openat() based implementation, that doesn't see changes
in symlinks.
There may still be combinations of operations and FS states that yield unhelpful
behavior. This is hard to avoid with symlinks and FS abstractions :(
The caching behavior of the current working directory is removed in this patch.
getRealFileSystem() is now specified to link to the process CWD, so the caching
is incorrect.
The user who needed this so far is clangd, which will immediately switch to
createPhysicalFileSystem().
Reviewers: ilya-biryukov, bkramer, labath
Subscribers: ioeric, kadircet, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56545
llvm-svn: 351050
Summary:
Add support for options that always prefix their value, giving an error
if the value is in the next argument or if the option is given a value
assignment (ie. opt=val). This is the desired behavior for the -D option
of FileCheck for instance.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions and introduced when creating
D56549)
Reviewers: jdenny
Subscribers: llvm-commits, probinson, kristina, hiraditya,
JonChesterfield
Differential Revision: https://reviews.llvm.org/D56549
llvm-svn: 351038
This shortcut mechanism for creating types was added 10 years ago, but
has seen almost no uptake since then, neither internally nor in
external projects.
The very small number of characters saved by using it does not seem
worth the mental overhead of an additional type-creation API, so,
delete it.
Differential Revision: https://reviews.llvm.org/D56573
llvm-svn: 351020
On AIX, attempting (without root) to set the sticky bit on a file with
the `chmod` utility will give:
```
chmod: not all requested changes were made to <file>
```
The same occurs when modifying other permission bits on a file with the
sticky bit already set.
It seems that the `chmod` function will report success despite failing
to set the sticky bit.
llvm-svn: 350735
Prediction control instructions are only
mandatory from v8.5a onwards but is optional
from Armv8.0-A. This patch adds a command
line option to enable it by it's own.
Differential Revision: https://reviews.llvm.org/D56007
llvm-svn: 350385
This makes the target name consistent with how all the other unit tests are
named.
Differential Revision: https://reviews.llvm.org/D56216
llvm-svn: 350339
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also moves to FeatureSB the old FeatureSpecRestrict.
Reviewers: pbarrio, olista01, t.p.northover, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55921
llvm-svn: 350126
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
llvm-svn: 349973
Weak symbols are supposed to be supported in the ELF TextAPI
implementation, but the YAML handler didn't read or write the `Weak`
member of ELFSymbol. This change adds the YAML mapping and updates tests
to ensure correct behavior.
Differential Revision: https://reviews.llvm.org/D56020
llvm-svn: 349950
Summary:
This function checks whether the mappings in the interval map overlap
with the given range [a;b]. The motivation is to enable checking for
overlap before inserting a new interval into the map.
Reviewers: vsk, dblaikie
Subscribers: dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D55760
llvm-svn: 349898
Summary:
This function is very similar to add_llvm_library(), so this patch merges it
into add_llvm_library() and replaces all calls to add_llvm_loadable_module(lib ...)
with add_llvm_library(lib MODULE ...)
Reviewers: philip.pfaffe, beanz, chandlerc
Reviewed By: philip.pfaffe
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51748
llvm-svn: 349839
We need to keep the underlying profile reader alive as long as the
profile data, because the profile data may contain StringRefs referring
to strings in the reader's name table.
llvm-svn: 349600
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
IR-printing AfterPass instrumentation might be called on a loop
that has just been invalidated. We should skip printing it to
avoid spurious asserts.
Reviewed By: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D54740
llvm-svn: 348887
This change makes DT_SONAME treated as an optional trait for ELF TextAPI
stubs. This change accounts for the fact that shared objects aren't
guaranteed to have a DT_SONAME entry. Tests have been updated to check
for correct behavior of an optional soname.
Differential Revision: https://reviews.llvm.org/D55533
llvm-svn: 348817
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
A dependency on TestingSupport was introduced in rL348735 but
library was not incldued in the LLVM_LINK_LLVM_DYLIB build.
Differential Revision: https://reviews.llvm.org/D55526
llvm-svn: 348803
Summary: The APFloat and Constant APIs taking an APInt allow arbitrary payloads,
and that's great. There's a convenience API which takes an unsigned, and that's
silly because it then directly creates a 64-bit APInt. Just change it to 64-bits
directly.
At the same time, add ConstantFP NaN getters which match the APFloat ones (with
getQNaN / getSNaN and APInt parameters).
Improve the APFloat testing to set more payload bits.
Reviewers: scanon, rjmccall
Subscribers: jkorous, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D55460
llvm-svn: 348791
The list generated in the target parser tests is the
same as the one in the AArch64 target parser.
Use that one instead.
Differential Revision: https://reviews.llvm.org/D55509
llvm-svn: 348757
Since TBEHandler doesn't maintain state or otherwise have any need to be
a class right now, the read and write functions have been moved out and
turned into standalone functions. Additionally, the TBE read function
has been updated to return an Expected value for better error handling.
Tests have been updated to reflect these changes.
Differential Revision: https://reviews.llvm.org/D55450
llvm-svn: 348735
Markus Lavin