The test based on PR42010:
https://bugs.llvm.org/show_bug.cgi?id=42010
...may show an inaccuracy for PPC's target defs, but we should not
be so aggressive with an assert here. There's no telling what out-of-tree
targets look like.
llvm-svn: 361696
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
In a few places in getInstrMapping, we check if use/def instructions for the
instruction we're mapping have floating point constraints.
We can improve this check and reduce the number of copies in GISel-compiled code
if we make a couple observations:
- For a def instruction, it only matters if the def instruction must always
output a value stored on a FPR
- For a use instruction, it only matters if the use instruction must always
only take in values stored in FPRs
This adds two new functions:
- onlyUsesFP
- onlyDefinesFP
Then we can use those when we're checking the uses/defs instead.
Without this patch, the load, unmerge, store, and select in the added test
would have unnecessary copies.
Differential Revision: https://reviews.llvm.org/D62426
llvm-svn: 361679
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
The fcsel and csel instructions differ in only the register banks they work on.
So, they're entirely interchangeable otherwise.
With this in mind, this does two things:
- Teach AArch64RegisterBankInfo to consider the inputs to G_SELECT as well as
the outputs.
- Teach it to choose the best register bank mapping based off the constraints
of the inputs and outputs.
The "best" in this case means the one that requires the smallest number of
copies to properly emit a fcsel/csel.
For example, if the inputs are all already going to be on FPRs, we should
emit a fcsel, even if the output is a GPR. This costs one copy to produce the
result, but saves us from copying the inputs into GPRs.
Also update the regbank-select.mir to check that we end up with the right
select instruction.
Differential Revision: https://reviews.llvm.org/D62267
llvm-svn: 361665
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
llvm-svn: 361644
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
llvm-svn: 361608
The D45316 introduced the `shouldTransformMulToShiftsAddsSubs` function
to check that breaking down constant multiplications into a series
of shifts, adds, and subs is efficient. Unfortunately, this function
does not check maximum number of steps on all paths of the algorithm.
This patch fixes this bug.
Fix for PR41929.
Differential Revision: https://reviews.llvm.org/D62166
llvm-svn: 361606
When we are scheduling the load and addi, if all other heuristic didn't take effect,
we will try to schedule the addi before the load, to hide the latency, and avoid the
true dependency added by RA. And this only take effects for Power9.
Differential Revision: https://reviews.llvm.org/D61930
llvm-svn: 361600
Summary:
On Windows, X8 may be used to pass in the address of an aggregate that
is returned indirectly. Therefore, it should be forwarded to variadic
musttail calls and preserved in thunks.
Fixes PR41997
Reviewers: mgrang, efriedma
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62344
llvm-svn: 361585
Summary:
Appears identical to powerpc64{,le}.
Regenerate test that is being affected by upcoming patch.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: nemanjai, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62339
llvm-svn: 361543
We were assuming a much larger possible per-wave visible stack
allocation than is possible:
faa3ae5138/src/core/runtime/amd_gpu_agent.cpp (L70)
Based on this, we can assume the high 15 bits of a frame index or sret
are 0. The frame index value is the per-lane offset, so the maximum
frame index value is MAX_WAVE_SCRATCH / wavesize.
Remove the corresponding subtarget feature and option that made
this configurable.
llvm-svn: 361541
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 361527
Summary:
These features will both be implemented soon, so I thought I would
save time by adding the boilerplate for both of them at the same time.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62047
llvm-svn: 361516
When printing assembly for PtrToInt, AsmPrinter::lowerConstant
incorrectly assumed that if PtrToInt was not converting to an
int with exactly the same number of bits, it must be widening
to a larger int. But this isn't necessarily true; PtrToInt can
also shrink the size, which is useful when you want to produce
a known 32-bit pointer on a 64-bit platform (on x86_64 ELF
this yields a R_X86_64_32 relocation).
The old behavior of falling through to the widening case for a
narrowing PtrToInt yields bogus assembly code like this, which
fails to assemble because the no-op bit and it accidentally
creates is not a valid relocation:
```
.long a&-1
```
The fix is to treat a narrowing PtrToInt exactly the same as
it already treats Trunc: just emit the expression and let
the assembler deal with truncating it in the appropriate way.
Patch by Mat Hostetter <mjh@fb.com>.
Differential Revision: https://reviews.llvm.org/D61325
llvm-svn: 361508
The previous patch added a member set to store instructions that we
could allow to wrap. But this wasn't cleared between searches meaning
that they could get promoted, incorrectly, during the promotion of a
separate valid chain.
Differential Revision: https://reviews.llvm.org/D62254
llvm-svn: 361462
Summary:
In this patch, `ISD::RETURNADDR` is lowered on the emscripten target
to the new Emscripten runtime function `emscripten_return_address`, which
implements the functionality.
Patch by Guanzhong Chen
Reviewers: tlively, aheejin
Reviewed By: tlively
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62210
llvm-svn: 361454
In general dynamic/local dynamic TLS models, with -fno-plt,
* x86: emit `calll *___tls_get_addr@GOT(%ebx)` instead of `calll ___tls_get_addr@PLT`
Note, on x86, if we can get rid of %ebx as the PIC register,
it may be better to use a register not preserved across function calls.
* x86_64: emit `callq *__tls_get_addr@GOTPCREL(%rip)` instead of `callq __tls_get_addr@PLT`
Reorganize the code by separating 32-bit and 64-bit.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62106
llvm-svn: 361453
We effectively had a second set of isel patterns that tried to use a
regular store instruction and an extract_subreg instruction. Or a masked move
and an extract_subreg. These patterns were intended to override the
matching of VEXTRACT instructions by taking advantage of the priority
of the explicit immediate 0 for the index.
This patch instaed just disables the immediate 0 matchin the VEXTRACT
patterns. This each of the component pieces of the larger patterns will
match by themselves.
This found a bug of sorts were we didn't use 128-bit store for 512->128
extract on KNL. Its unclear what the right thing here should be.
Using the vextract avoids constraining the register allocator to use
xmm0-15. But it always results in a longer encoding if the register
allocator ends up choosing xmm0-15 anyway.
llvm-svn: 361431
We were turning roundss/sd/ps/pd intrinsics with immediates of 1 or 2 into
llvm.floor/ceil. The llvm.ceil/floor intrinsics are supposed to correspond
to the libm functions. For the libm functions we need to disable the
precision exception so the llvm.floor/ceil functions should always map to
encodings 0x9 and 0xA.
We had a mix of isel patterns where some used 0x9 and 0xA and others used
0x1 and 0x2. We need to be consistent and always use 0x9 and 0xA.
Since we have no way in isel of knowing where the llvm.ceil/floor came
from, we can't map X86 specific intrinsics with encodings 1 or 2 to it.
We could map 0x9 and 0xA to llvm.ceil/floor instead, but I'd really like
to see a use case and optimization advantage first.
I've left the backend test cases to show the blend we now emit without
the extra isel patterns. But I've removed the InstCombine tests completely.
llvm-svn: 361425
This fix is for the problem from https://bugs.llvm.org/show_bug.cgi?id=38714.
Specifically, Simple Register Coalescing creates following conversion :
undef %0.sub_32:gpr64 = ORRWrs $wzr, %3:gpr32common, 0, debug-location !24;
It copies 32-bit value from gpr32 into gpr64. But Live DEBUG_VALUE analysis
is not able to create debug location record for that instruction. So the problem
is in that debug info for argc variable is incorrect. The fix is
to write custom isCopyInstrImpl() which would recognize the ORRWrs instr.
llvm-svn: 361417
Keep it optional in cases this is ever needed in some global
context. Currently it's only used for getting an upper bound inline
asm code size.
For AMDGPU, gfx10 increases the maximum instruction size to
20-bytes. This avoids penalizing older subtargets when estimating code
size, and making some annoying branch relaxation test adjustments.
llvm-svn: 361405
This is a minimal start to correcting a problem most directly discussed in PR38086:
https://bugs.llvm.org/show_bug.cgi?id=38086
We have been hacking around a limitation for FP select patterns by using the
fast-math-flags on the condition of the select rather than the select itself.
This patch just allows FMF to appear with the 'select' opcode. No changes are
needed to "FPMathOperator" because it already includes select-of-FP because
that definition is based on the (return) value type.
Once we have this ability, we can start correcting and adding IR transforms
to use the FMF on a 'select' instruction. The instcombine and vectorizer test
diffs only show that the IRBuilder change is behaving as expected by applying
an FMF guard value to 'select'.
For reference:
rL241901 - allowed FMF with fcmp
rL255555 - allowed FMF with FP calls
Differential Revision: https://reviews.llvm.org/D61917
llvm-svn: 361401
Does not affect update_llc_test_checks, or the actual output,
but is not accepted by the actual FileCheck.
Sorry, i should have noticed this before committing,
not the very next second after..
llvm-svn: 361398
Summary:
Another target that prefers to use `-march` in tests
```
llvm/test/CodeGen/SPARC$ grep -ri mtriple | wc -l
25
llvm/test/CodeGen/SPARC$ grep -ri march | wc -l
165
```
This test is being affected by a further patch,
so regenerate it to better visualize the changes
Reviewers: RKSimon, dcederman, gberry
Reviewed By: RKSimon
Subscribers: jyknight, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62242
llvm-svn: 361381
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
llvm-svn: 361356
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
Sanjay Patel