This is a fairly mechanical change, it just moves each algorithm into its own header. This is a NFC.
Note: during this change, I burned down all the includes, so this follows "include only and exactly what you use."
Differential Revision: https://reviews.llvm.org/D103583
This reverts commit 924ea3bb53 *again*, this time because it broke the
LLDB build with modules. We need to figure out what's up with the libc++
modules build once and for all.
Differential Revision: https://reviews.llvm.org/D103369
Implements part of P0896 'The One Ranges Proposal'.
Implements [range.iter.op.prev].
Depends on D102563.
Differential Revision: https://reviews.llvm.org/D102564
Implements part of P0896 'The One Ranges Proposal'.
Implements [range.iter.op.next].
Depends on D101922.
Differential Revision: https://reviews.llvm.org/D102563
This is a preparation to split the format header in smaller parts for the
upcoming patches.
Depends on D101723
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D102703
This is the second to last one! Based on D101396. Depends on D100255. Refs D101079 and D101193.
Differential Revision: https://reviews.llvm.org/D101476
This allocator is not intended for libc++'s users to use;
it's strictly an implementation detail of `src/locale.cpp`.
So, move it to the `src/include/` directory.
Drive-by const-qualify its comparison operators.
For consistency with `__hidden_allocator` (defined in `src/thread.cpp`),
do *not* remove it from "libcxx/lib/libc++unexp.exp",
"libcxx/utils/symcheck-blacklists/linux_blacklist.txt", etc.
Differential Revision: https://reviews.llvm.org/D101293
* `std::ranges::range`
* `std::ranges::sentinel_t`
* `std::ranges::range_difference_t`
* `std::ranges::range_value_t`
* `std::ranges::range_reference_t`
* `std::ranges::range_rvalue_reference_t`
* `std::ranges::common_range`
`range_size_t` depends on `sized_range` and will be added alongside it.
Implements parts of:
* P0896R4 The One Ranges Proposal`
Depends on D100255.
Differential Revision: https://reviews.llvm.org/D100269
When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
During the review of D97115 it was mentioned adding the `<utility>`
header for `__to_underlying` was a bit unfortunate. Nowadays we tend to
implement smaller headers, so a good reason to move `std::to_underlying`
to its own header and adjust `<charconv>` to use the new header.
Differential Revision: https://reviews.llvm.org/D101233
Based on D100682 and D99855.
(Note: I originally was going to just make this part of D99855, but I decided not to because this patch moves lots of unrelated code around, and I didn't want to make D99855 harder to review because of unrelated code-changes/moves.)
Differential Revision: https://reviews.llvm.org/D100686
This is the initial patch to implement ranges in libc++.
Implements parts of:
- P0896R4 One Ranges Proposal
- P1870 forwarding-range is too subtle
- LWG3379 in several library names is misleading
Reviewed By: ldionne, #libc, cjdb, zoecarver, Quuxplusone
Differential Revision: https://reviews.llvm.org/D90999
These variables were introduced during early work on the runtimes build
but were obsoleted by {LIBCXX,LIBCXXABI,LIBUNWIND}_INSTALL_LIBRARY_DIR.
Differential Revision: https://reviews.llvm.org/D99697
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D97572
The aim is to add the missing z/OS specific locale functions for libc++ (newlocale, freelocale and uselocale).
Reviewed By: ldionne, #libc, curdeius
Differential Revision: https://reviews.llvm.org/D98044
We need CLOCK_MONOTONIC equivalent implementation for z/OS within libc++. The default implementation is asserting.
On z/OS the lack of 'clock_gettime()' and 'time_point()' force us to look for alternatives.
The current proposal is to use `gettimeofday()` for CLOCK_MONOTONIC which is also used in CLOCK_REALTIME. This will allow us to skip the assertion with compromised CLOCK_MONOTONIC implementation which will not guarantee to never go back in time because it will use `gettimeofday()` but only when it's set.
Is this a good compromise for platforms which does not support monotonic clock?
Hopefully this will spark the discussion and agreement how to proceed in this situation.
Reviewed By: #libc, ldionne, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D93542
We do ship those headers, so the directory name should not be something
that can potentially conflict with user-defined directories.
Differential Revision: https://reviews.llvm.org/D95956
This is the first step at implementing <format>. It adds the <format> header
and implements the `format_error`. class.
Implemnts parts of:
-P0645 Text Formatting
Reviewed By: ldionne, #libc, miscco, curdeius
Differential Revision: https://reviews.llvm.org/D92214
It has the low-level bit fiddling operations from bit. It eliminates a cyclic dependency between __bit_reference, bits, and vector. I want to exploit this in later patches.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D94908
This commit is a step towards making it easier to add support for arrays
in allocate_shared. Adding support for arrays will require writing multiple
functions, and the current complexity of writing allocate_shared is
prohibitive for understanding.
Differential Revision: https://reviews.llvm.org/D93130
In addition to making the code a lot easier to grasp by localizing many
helper functions to the only file where they are actually needed, this
will allow creating helper functions that depend on allocator_traits
outside of <memory>.
This is done as part of implementing array support in allocate_shared,
which requires non-trivial array initialization algorithms that would be
better to keep out of <memory> for sanity. It's also a first step towards
splitting up our monolithic headers into finer grained ones, which will
make it easier to reuse functionality across the library. For example,
it's just weird that we had to define `addressof` inside <type_traits>
to avoid circular dependencies -- instead it's better to implement those
in true helper headers.
Differential Revision: https://reviews.llvm.org/D93074
This patch adds a shim for missing time functions on z/OS, and adds a
layer of indirection to account for differences in the timespec struct
on different systems.
This was originally committed as 173b51169b and reverted in 777ca48c9f
because the original commit also checked-in unrelated changes.
Differential Revision: https://reviews.llvm.org/D87940
This patch is one part of many steps required to build libc++ and libc++abi libraries on z/OS. This particular deals with time related functions and consists of the following 3 parts.
1) Initialization of :timeval within libc++ library need to be adjusted to work on z/OS.
The following is z/OS definition from time.h which includes additional aggregate member.
typedef signed int suseconds_t;
struct timeval {
time_t tv_sec;
char tv_usec_pad[4];
suseconds_t tv_usec;
};
In contracts the following is definition from time.h on Linux.
typedef long int __suseconds_t;
struct timeval
{
__time_t tv_sec;
__suseconds_t tv_usec;
};
2) In addition, retrieving ::timespec within libc++ library needs to be adjusted to compensate the difference of some of the members of ::stat depending of the target host.
Here are the 2 members in conflict on z/OS extracted from stat.h.
struct stat {
...
time_t st_atime;
time_t st_mtime;
...
};
In contract here is Linux equivalent from stat.h.
struct stat
{
...
struct timespec st_atim;
struct timespec st_mtim;
...
};
3) On Linux both members are of type timespec whereas on z/OS an object of type timespec need to be constructed first before retrieving it within libc++ library.
The libc++ header file __threading_support calls nanosleep, which is not available on z/OS.
The equivalent functionality will be implemented by using both sleep() and usleep().
Reviewed By: ldionne, #libc
Differential Revision: https://reviews.llvm.org/D87940
Currently, vendor-specific availability markup is enabled by default.
This means that even when building against trunk libc++, the headers
will by default prevent you from using some features that were not
released in the dylib on your target platform. This is a source of
frustration since people building libc++ from sources are usually not
trying to use some vendor's released dylib.
For that reason, I've been thinking for a long time that availability
annotations should be off by default, which is the primary change that
this commit enables.
In addition, it reworks the implementation to make it easier for new
vendors to add availability annotations for their platform, and it
refreshes the documentation to reflect the current state of the codebase.
Finally, a CMake configuration option is added to control whether
availability annotations should be turned on for the flavor of libc++
being created. The intent is for vendors like Apple to turn it on, and
for the upstream libc++ to leave it off (the default).
Differential Revision: https://reviews.llvm.org/D90843
Those are part of the library, and shipping them just adds a tiny bit of
size to the distribution. This was originally added in b422ecc7de to
make it possible to match the Makefile build, which doesn't exist anymore.
The upside is build system simplification.
Before 6db314e86b, when running cmake with clang, libcxx, and
compiler-rt enabled, building `ninja all` would run the
generate-cxx-headers target, due to the sanitizers depending on it.
After 6db314e86b, if LIBCXX_ENABLE_SHARED and LIBCXX_ENABLE_STATIC
and LIBCXX_INCLUDE_TESTS and LIBCXX_ENABLE_EXPERIMENTAL_LIBRARY are
disabled (https://reviews.llvm.org/D82702#2153627), `ninja all`
no longer copies the libcxx headers, which means clang can't compile
programs like `#include <string>` on macOS.
Explicitly add the copy target to the all target to restore the old
behavior.
This is a massive revert of the following commits (from most revent to oldest):
2b9b7b5775.
529ac3319728270234f169c2087283b5aa67446e5d796645d6
After checking-in the __config_site change, a lot of things started breaking
due to widespread reliance on various aspects of libc++'s build, notably the
fact that we can include the headers from the source tree, but also reliance
on various "internal" CMake variables used by the runtimes build and compiler-rt.
These were unintended consequences of the change, and after two days, we
still haven't restored all the bots to being green. Instead, now that I
understand what specific areas this will blow up in, I should be able to
chop up the patch into smaller ones that are easier to digest.
See https://reviews.llvm.org/D89041 for more details on this adventure.
This commit should really be named "Workaround external projects depending
on libc++ build system implementation details". It seems that the compiler-rt
build (and perhaps other projects) is relying on the fact that we copy libc++
and libc++abi headers to `<build-root>/include/c++/v1`. This was changed
by 5d796645, which moved the headers to `<build-root>/projects/libcxx/include/c++/v1`
and broke the compiler-rt build.
I'm committing this workaround to fix the compiler-rt build, but we should
remove reliance on implementation details like that. The correct way to
setup the compiler-rt build would be to "link" against the `cxx-headers`
target in CMake, or to run `install-cxx-headers` using an appropriate
installation prefix, and then manually add a `-I` path to that location.
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
This commit was originally applied in 1e46d1aa3 and reverted in eb60c487
because it broke the libc++abi and libunwind test suites. This has now
been fixed.
Differential Revision: https://reviews.llvm.org/D89041
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D89041
This is a partial revert of D62155. Rather than copying libc++ headers
into the build directory to be later overwritten by the final headers,
use -isystem flag to access libc++ headers during CMake checks. This
should address the occasional flake we've seen, especially on Windows
builders where CMake fails to overwrite __config with the final version.
Differential Revision: https://reviews.llvm.org/D88454
Instead of having complex logic around how to include the libc++ headers
and __config_site, handle that by defining cxx-headers as an INTERFACE
library and linking against it. After this patch, linking against cxx-headers
is sufficient to get the right __config_site include and include paths
for libc++.
Differential Revision: https://reviews.llvm.org/D82702
We've decided to move away from that by requiring that libc++ is built
as part of the monorepo a while ago. This commit removes code pertaining
to that unsupported use case and produces a clear error when the user
violates that.
In fact, building outside of the monorepo will still work as long as
LLVM_PATH is pointing to the root of the LLVM project, although that
is not officially supported.
The runtimes build includes libcxx/include/CMakeLists.txt directly instead
of going through the top-level CMake file. This not-very-hygienic inclusion
caused some variables like LIBCXX_BINARY_DIR not to be defined properly,
and the config_site generation logic to fail after landing 53623d4aa7.
This patch works around this issue by defining the missing variables.
However, the proper fix for this would be for the runtimes build to
always go through libc++'s top-level CMakeLists.txt. Doing otherwise
is unsupported.
Before this patch, the __config_site header was only generated when at
least one __config_site macro needed to be defined. This lead to two
different code paths in how libc++ is configured, depending on whether
a __config_site header was generated or not. After this patch, the
__config_site is always generated, but it can be empty in case there
are no macros to define in it.
More context on why this change is important
--------------------------------------------
In addition to being confusing, this double-code-path situation lead to
broken code being checked in undetected in 2405bd6898, which introduced
the LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT CMake setting. Specifically,
the _LIBCPP_HAS_MERGED_TYPEINFO_NAMES_DEFAULT <__config_site> macro was
supposed NOT to be defined unless LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT
was specified explicitly on the CMake command line. Instead, what happened
is that it was defined to 0 if it wasn't specified explicitly and a
<__config_site> header was generated. And defining that macro to 0 had
the important effect of using the non-unique RTTI comparison implementation,
which changes the ABI.
This change in behavior wasn't noticed because the <__config_site> header
is not generated by default. However, the Apple configuration does cause
a <__config_site> header to be generated, which lead to the wrong RTTI
implementation being used, and to https://llvm.org/PR45549. We came close
to an ABI break in the dylib, but were saved due to a downstream-only
change that overrode the decision of the <__config_site> for the purpose
of RTTI comparisons in libc++abi. This is an incredible luck that we should
not rely on ever again.
While the problem itself was fixed with 2464d8135e by setting
LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT explicitly in the Apple
CMake cache and then in d0fcdcd28f by making the setting less
brittle, the point still is that we should have had a single code
path from the beginning. Unlike most normal libraries, the macros
that configure libc++ are really complex, there's a lot of them and
they control important properties of the C++ runtime. There must be
a single code path for that, and it must be simple and robust.
Differential Revision: https://reviews.llvm.org/D80927
Patch from Christopher Di Bella (cjdb@google.com)
Reviewed as https://reviews.llvm.org/D74291
Adds `std::same_as` to libc++. Since there aren't clang-format rules for
//requires-expressions//, I'll need to disable the formatter in certain areas.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
This is a re-application of f383fb40b1, wich was reverted in 04d48111b
because the build bots had not been updated yet. The build bot configurations
have now been updated not to use the deprecated targets, and I verified
that they were using the non-deprecated targets, so we should be good
unless I missed a bot.
Differential Revision: https://reviews.llvm.org/D76104
This reverts commit f383fb40b. It looks like several of our build bots
are still using the legacy target names, so we'll change those before
we commit this change again.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
There's no doubt this commit will break some CI systems, however the
fix is trivial.
Differential Revision: https://reviews.llvm.org/D76104
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
The first attempt to commit this failed because it exposed a bug in the
tests for modules. Now that this has been fixed, it should be safe to
commit this.
Reviewers: EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 367903
This reverts r366593, which caused unforeseen breakage on the build bots.
I'm reverting until the problems have been figured out and fixed.
llvm-svn: 366603
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
Reviewers: rodgert, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 366593
Summary:
Following the discussion on the libcxx-dev mailing list
(http://lists.llvm.org/pipermail/libcxx-dev/2019-May/000358.html),
this implements the new policy for handling experimental features and
their deprecation. We basically add a deprecation warning for
std::experimental::filesystem, and we remove a bunch of <experimental/*>
headers that were now empty.
Reviewers: mclow.lists, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, arphaman, libcxx-commits, jfb
Tags: #libc
Differential Revision: https://reviews.llvm.org/D62428
llvm-svn: 363072
Summary: On some platforms C++ headers are packaged with the compiler not the sysroot. If you don't copy C++ headers into the build include directory during configuraiton of the outer build the C++ check during the runtime configuration may get inaccurate results.
Reviewers: phosek, compnerd, smeenai, EricWF
Reviewed By: compnerd
Subscribers: EricWF, christof, libcxx-commits, mgorny, llvm-commits
Tags: #llvm, #libc
Differential Revision: https://reviews.llvm.org/D62155
llvm-svn: 361513
Summary:
Adds the coroutine `std::experimental::task<T>` type described in proposal P1056R0.
See https://wg21.link/P1056R0.
This implementation allows customization of the allocator used to allocate the
coroutine frame by passing std::allocator_arg as the first argument, followed by
the allocator to use.
This supports co_awaiting the same task multiple times. The second and
subsequent times it returns a reference to the already-computed value.
This diff also adds some implementations of other utilities that have potential for
standardization as helpers within the test/... area:
- `sync_wait(awaitable)` - See P1171R0
- `manual_reset_event`
Move the definition of the __aligned_allocation_size helper function
from <experimental/memory_resource> to <experimental/__memory>
so it can be more widely used without pulling in memory_resource.
Outstanding work:
- Use C++14 keywords directly rather than macro versions
eg. use `noexcept` instead of `_NOEXCEPT`).
- Add support for overaligned coroutine frames.
This may need wording in the Coroutines TS to support passing the extra `std::align_val_t`.
- Eliminate use of `if constexpr` if we want it to compile under C++14.
Patch by @lewissbaker (Lewis Baker).
llvm-svn: 357010
Summary:
I can't think of a reason for shipping this empty header. If there is
a reason to do so, then hopefully this review can uncover it.
Reviewers: mclow.lists, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59137
llvm-svn: 355829
Summary:
Some implementations of fenv.h use macros to define the functions they provide. This can cause problems when `std::fegetround()` is spelled in source.
This patch adds a `fenv.h` header to libc++ for the sole purpose of turning those macros into real functions.
Reviewers: rsmith, mclow.lists, ldionne
Reviewed By: rsmith
Subscribers: mgorny, christof, libcxx-commits
Differential Revision: https://reviews.llvm.org/D57729
llvm-svn: 353767
Summary:
std::dynarray had been proposed for C++14, but it was pulled out from C++14
and there are no plans to standardize it anymore.
Reviewers: mclow.lists, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, arphaman, libcxx-commits
Differential Revision: https://reviews.llvm.org/D54801
llvm-svn: 347783
Summary:
Major QoI considerations:
- The facility is backported to C++14, same as libstdc++.
- Efforts have been made to minimize the header dependencies.
- The design is friendly to the uses of MSVC intrinsics (`__emulu`, `_umul128`, `_BitScanForward`, `_BitScanForward64`) but not implemented; future contributions are welcome.
Thanks to Milo Yip for contributing the implementation of `__u64toa` and `__u32toa`.
References:
https://wg21.link/p0067r5https://wg21.link/p0682r1
Reviewers: mclow.lists, EricWF
Reviewed By: mclow.lists
Subscribers: ldionne, Quuxplusone, christof, mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D41458
llvm-svn: 338479
This commit adds a node handle type, (located in __node_handle), and adds
extract() and insert() members to all map and set types, as well as their
implementations in __tree and __hash_table.
The second half of this feature is adding merge() members, which splice nodes
in bulk from one container into another. This will be committed in a follow-up.
Differential revision: https://reviews.llvm.org/D46845
llvm-svn: 338472
The bots were failing to build the cxx_filesystem target, so the
tests were failing. Though this does lead me to wonder how it
was ever working with c++experimental.
llvm-svn: 338095
This is a refinement on r337833. Previously we were installing two
copies of c++abi headers in libc++ build directory, one in
include/c++build and another one in include/c++/v1. However, the
second copy is unnecessary when building libc++ standalone.
Differential Revision: https://reviews.llvm.org/D49752
llvm-svn: 337979
This variable is already set in CMakeLists.txt but it wasn't used
which means that the headers get installed into a wrong location
when the per target runtime directory option is being used.
Differential Revision: https://reviews.llvm.org/D49345
llvm-svn: 337118
r334477 renamed the cxx-headers target to cxx_headers, but various
pieces sort-of expect the target names to match the component (e.g.,
LLVM_DISTRIBUTION_COMPONENTS in the various bootstrap caches, which, via
some magic foreign to me, seems to expect cxx-headers,
install-cxx-headers, and install-cxx-headers-stripped to exist.)
Revert back to cxx-headers.
Differential Revision: https://reviews.llvm.org/D48701
llvm-svn: 335899
This change adds a support for multiarch style runtimes layout, so in
addition to the existing layout where runtimes get installed to:
lib/clang/$version/lib/$os
Clang now allows runtimes to be installed to:
lib/clang/$version/$target/lib
This also includes libc++, libc++abi and libunwind; today those are
assumed to be in Clang library directory built for host, with the
new layout it is possible to install libc++, libc++abi and libunwind
into the runtime directory built for different targets.
The use of new layout is enabled by setting the
LLVM_ENABLE_RUNTIME_TARGET_DIR CMake variable and is supported by both
projects and runtimes layouts. The runtimes CMake build has been further
modified to use the new layout when building runtimes for multiple
targets.
Differential Revision: https://reviews.llvm.org/D45604
llvm-svn: 335809
Using file(COPY FILE...) has several downsides. Since the file command
is only executed at configuration time, any changes to headers made
after the initial CMake execution are ignored. This can lead to subtle
errors since the just built Clang will be using stale libc++ headers.
Furthermore, since the headers are copied prior to executing the build
system, this may hide missing dependencies on libc++ from other LLVM
components.
This changes replaces the use of file(COPY FILE...) command with a
custom command and target which addresses all aforementioned issues and
matches the implementation already used by other LLVM components that
also install headers like Clang builtin headers.
Differential Revision: https://reviews.llvm.org/D44773
llvm-svn: 334468
Petr Hosek