Currently getOptimalMemOpType returns i32 for large enough sizes without
checking for alignment, leading to poor code generation when misaligned accesses
aren't permitted as we generate a word store then later split it up into byte
stores. This means we inadvertantly go over the MaxStoresPerMemcpy limit and for
memset we splat the memset value into a word then immediately split it up
again.
Fix this by leaving it up to FindOptimalMemOpLowering to figure out which type
to use, but also fix a bug there where it wasn't correctly checking if
misaligned memory accesses are allowed.
Differential Revision: https://reviews.llvm.org/D33442
llvm-svn: 303990
r303972 used GetValueForKeyAsInteger with mismatched types (e.g.
instantiating with uint64_t, but passing a size_t argument), which
manifested itself on 32-bit architectures.
The intended usage of these functions was to not specify the type
explicitly, and let the compiler figure that out, so switch to that kind
of usage instead.
llvm-svn: 303988
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
Running unittests/Support/DynamicLibrary/DynamicLibraryTests fails when LLVM is
configured with LLVM_EXPORT_SYMBOLS_FOR_PLUGINS=ON, because the test's version
script only contains symbols extracted from the static libraries, that the test
links with, but not those from the main object/executable itself. The patch
explicitly exports the one symbol needed by the test.
This change fixes https://bugs.llvm.org/show_bug.cgi?id=32893
Patch authored by Momchil Velikov.
Differential Revision: https://reviews.llvm.org/D33490
llvm-svn: 303979
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303978
Summary:
Custom vfs::FileSystem is currently used for unit tests.
This revision depends on https://reviews.llvm.org/D33397.
Reviewers: bkramer, krasimir
Reviewed By: bkramer, krasimir
Subscribers: klimek, cfe-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33416
llvm-svn: 303977
I found this when builded llc binary using gcc 5.4.1 + LLD.
gcc produces duplicate entries in .debug_gnu_pubtypes section, ex:
UnifyFunctionExitNodes.cpp.o has:
0x0000ac07 EXTERNAL TYPE "std::success_type<void*>"
0x0000ac07 EXTERNAL TYPE "std::success_type<void*>"
clang produces single entry here:
0x0000d291 EXTERNAL TYPE "std::__success_type<void *>"
If we link output from gcc with LLD, that would produce excessive duplicate
entries in .gdb_index constant pool area. That does not seem affect gdb work,
but makes .gdb_index larger than it can be.
I also checked that gold filters out such duplicates too. Patch fixes it.
Differential revision: https://reviews.llvm.org/D32647
llvm-svn: 303975
https://sourceware.org/gdb/onlinedocs/gdb/Index-Section-Format.html says:
"A CU vector in the constant pool is a sequence of offset_type values.
The first value is the number of CU indices in the vector.
Each subsequent value is the index and symbol attributes of a CU in the CU list."
Previously we keeped 2 values until the end, what was useless.
Initially was a part of D32647, though it is possible to split out.
Patch do that.
Differential revision: https://reviews.llvm.org/D33551
llvm-svn: 303973
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
The patch rL303730 was reverted because test lsr-expand-quadratic.ll failed on
many non-X86 configs with this patch. The reason of this is that the patch
makes a correctless fix that changes optimizer's behavior for this test.
Without the change, LSR was making an overconfident simplification basing on a
wrong SCEV. Apparently it did not need the IV analysis to do this. With the
change, it chose a different way to simplify (that wasn't so confident), and
this way required the IV analysis. Now, following the right execution path,
LSR tries to make a transformation relying on IV Users analysis. This analysis
is target-dependent due to this code:
// LSR is not APInt clean, do not touch integers bigger than 64-bits.
// Also avoid creating IVs of non-native types. For example, we don't want a
// 64-bit IV in 32-bit code just because the loop has one 64-bit cast.
uint64_t Width = SE->getTypeSizeInBits(I->getType());
if (Width > 64 || !DL.isLegalInteger(Width))
return false;
To make a proper transformation in this test case, the type i32 needs to be
legal for the specified data layout. When the test runs on some non-X86
configuration (e.g. pure ARM 64), opt gets confused by the specified target
and does not use it, rejecting the specified data layout as well. Instead,
it uses some default layout that does not treat i32 as a legal type
(currently the layout that is used when it is not specified does not have
legal types at all). As result, the transformation we expect to happen does
not happen for this test.
This re-enabling patch does not have any source code changes compared to the
original patch rL303730. The only difference is that the failing test is
moved to X86 directory and now has requirement of running on x86 only to comply
with the specified target triple and data layout.
Differential Revision: https://reviews.llvm.org/D33543
llvm-svn: 303971
Re-commit r303937 + r303949 as they were not the cause for the build
failures.
We do not track liveness of reserved registers so adding them to the
liveins list in computeLiveIns() was completely unnecessary.
llvm-svn: 303970
In the absense of a more specific handler for TRAP_CAP (generated by
ENOTCAPABLE or ECAPMODE while in capability mode) treat it as a trace
trap. Obtained from FreeBSD r318884.
We should later add an option to have LLDB control the trapcap procctl
(as with ASLR), as well as report a specific stop reason. For now this
change eliminates an assertion failure from LLDB.
llvm-svn: 303965
block.
This allows writing much more natural and readable range based for loops
directly over the PHI nodes. It also takes advantage of the same tricks
for terminating the sequence as the hand coded versions.
I've replaced one example of this mostly to showcase the difference and
I've added a unit test to make sure the facilities really work the way
they're intended. I want to use this inside of SimpleLoopUnswitch but it
seems generally nice.
Differential Revision: https://reviews.llvm.org/D33533
llvm-svn: 303964
Clang supports coroutines in all dialects; Therefore libc++ should too,
otherwise the Clang extension is unusable.
I'm not convinced extending support to C++03 is a feasible long term
plan, since as the library grows to offer things like generators it
will be come increasingly difficult to limit the implementation to C++03.
However for the time being supporting C++03 isn't a big deal.
llvm-svn: 303963
We were leaving the SubobjectDesignator in a surprising situation, where
it was allegedly valid but didn't actually refer to a type. This caused
a crash later on.
This patch fills out the SubobjectDesignator with the pointee type (as
happens in other evaluations of constant pointers) so that we don't
crash later.
llvm-svn: 303957
Clang started providing -fcoroutines and defining __cpp_coroutines
way before it implemented the __builtin_coro_foo functions. This
means that simply checking if __cpp_coroutines is not a sufficient
way of detecting the actual feature.
This patch implements _LIBCPP_HAS_NO_COROUTINES which implements
a slightly more complex feature check. Specifically it requires
__cpp_coroutines >= 201703L, which only holds for Clang 5.0 built
after 2017/05/24.
llvm-svn: 303956
The tests were previously guarded by #if defined(_LIBCPP_VER) || defined(_MSVC_STL_VER),
which is both incorrect (e.g. _LIBCPP_VERSION) and unneeded. Although the tests are
technically non-standard (yet) they are supported by both libc++ and MSVC's STL.
libstdc++ doesn't regularly use the test suite so I'm not concerned about guarding these
tests for them.
llvm-svn: 303953
Summary:
RelocVisitor had too many, too small functions. This patch group them
by architecture rather than each relocation type.
Reviewers: grimar, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33580
llvm-svn: 303950
We have a lot of complicated logic to determine where padding
is in a record, and the debug info doesn't always provide enough
information to figure it out with laser precision. In this case
we were putting the padding in the wrong place causing an
out of bounds access on a BitVector.
Right now we decide that any trailing padding of a child type
will be truncated during record layout, but this is only true
insofar as the class still is sized properly to end on an
alignment boundary, which the algorithm doesn't yet know about.
For now, just don't crash, even though we display padding twice
in this case.
llvm-svn: 303946
Summary:
For various clang analyzer tests, which were unsupported, I got lit
exceptions, similar to the following:
Exception during script execution:
Traceback (most recent call last):
File "utils/lit/lit/run.py", line 190, in execute_test
result = test.config.test_format.execute(test, lit_config)
File "tools/clang/test/Analysis/analyzer_test.py", line 11, in execute
if result.code == lit.Test.FAIL:
AttributeError: 'tuple' object has no attribute 'code'
This is because executeShTest() in utils/lit/lit/TestRunner.py is
supposed to return a lit.Test.Result object, but in case of unsupported
tests, it returns a plain tuple.
Fix this by returning a properly initialized lit.Test.Result object
instead.
Reviewers: rnk, rafael, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33579
llvm-svn: 303943
Summary:
allow_user_segv_handler had confusing name did not allow to control behavior for
signals separately.
Reviewers: eugenis, alekseyshl, kcc
Subscribers: llvm-commits, dberris, kubamracek
Differential Revision: https://reviews.llvm.org/D33371
llvm-svn: 303941
John Brawn