Reapply r372309
Errors that occur when reading an MRI script now include a corresponding
line number.
Differential Revision: https://reviews.llvm.org/D67449
llvm-svn: 372374
As per bug 40244, fixed an error where the error message was repeated.
Differential Revision: https://reviews.llvm.org/D67038
Patch by Yu Jian (wyjw)
llvm-svn: 372370
This patch introduces a cut-off threshold for dependency edge frequences with
the goal of simplifying the critical sequence computation. This patch also
removes the cost normalization for loop carried dependencies. We didn't really
need to artificially amplify the cost of loop-carried dependencies since it is
already computed as the integral over time of the delay (in cycle).
In the absence of backend stalls there is no need for computing a critical
sequence. With this patch we early exit from the critical sequence computation
if no bottleneck was reported during the simulation.
llvm-svn: 372337
Errors that occur when reading an MRI script now include a corresponding
line number.
Differential Revision: https://reviews.llvm.org/D67449
llvm-svn: 372309
Before this patch we gave a priority to a dynamic table found
from the section header.
It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.
This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.
It adds a few more diagnostic warnings for the logic above.
Differential revision: https://reviews.llvm.org/D67547
llvm-svn: 372122
We had a precompiled binary committed and not all of the relocations
supported were tested. This patch fixes this.
Differential revision: https://reviews.llvm.org/D67617
llvm-svn: 372110
We do not support them and fail with llvm_unreachable currently.
This is not the only target we do not support and also seems we are missing
the tests for those we have already. But I needed this one for another patch,
so posted it separatelly.
Relocation names are taken from llvm\include\llvm\BinaryFormat\ELFRelocs\PowerPC64.def
Differential revision: https://reviews.llvm.org/D67615
llvm-svn: 372109
Currently we only allow using a known named constants
for `Machine` field in YAML documents.
This patch allows using any numbers (valid or "unknown")
and adds test cases for current and new functionality.
With this it is possible to write a test cases for really unknown
EM_* targets.
Differential revision: https://reviews.llvm.org/D67652
llvm-svn: 372108
Support `llvm-ar h` and `llvm-ar -h` because they may be what users try
at first. Note, operation 'h' is undocumented in GNU ar.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67560
llvm-svn: 372088
The "TODO" mentioned was:
"Add test for symbol with no name but with a value once yaml2obj allows
referencing symbols with no name from relocations."
We can do it now.
Differential revision: https://reviews.llvm.org/D67609
llvm-svn: 372087
It is possible to use yaml2obj to create sections with overlapping sh_offset now.
This patch does that.
Differential revision: https://reviews.llvm.org/D67610
llvm-svn: 372081
GNU objcopy documents that -B is only useful with architecture-less
input (i.e. "binary" or "ihex"). After D67144, -O defaults to -I, and
-B is essentially a NOP.
* If -O is binary/ihex, GNU objcopy ignores -B.
* If -O is elf*, -B provides the e_machine field in GNU objcopy.
So to convert a blob to an ELF, `-I binary -B i386:x86-64 -O elf64-x86-64` has to be specified.
`-I binary -B i386:x86-64 -O elf64-x86-64` creates an ELF with its
e_machine field set to EM_NONE in GNU objcopy, but a regular x86_64 ELF
in elftoolchain elfcopy. Follow the elftoolchain approach (ignoring -B)
to simplify code. Users that expect their command line portable should
specify -B.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67215
llvm-svn: 371914
Fixes PR42171.
In GNU objcopy, if -O (--output-target) is not specified, the value is
copied from -I (--input-target).
```
objcopy -I binary -B i386:x86-64 a.txt b # b is copied from a.txt
llvm-objcopy -I binary -B i386:x86-64 a.txt b # b is an x86-64 object file
```
This patch changes our behavior to match GNU. With this change, we can
delete code related to -B handling (D67215).
Reviewed By: jakehehrlich
Differential Revision: https://reviews.llvm.org/D67144
llvm-svn: 371913
Most GNU binutils don't append full stops in error messages. This
convention has been adopted by a bunch of LLVM binary utilities. Make
llvm-ar follow the convention as well.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67558
llvm-svn: 371912
This is a continuation of the YAML library error reporting
refactoring/improvement and the idea by itself was mentioned
in the following thread:
https://reviews.llvm.org/D67182?id=218714#inline-603404
This performs a cleanup of all object emitters in the library.
It allows using the custom one provided by the caller.
One of the nice things is that each tool can now print its tool name,
e.g: "yaml2obj: error: <text>"
Also, the code became a bit simpler.
Differential revision: https://reviews.llvm.org/D67445
llvm-svn: 371865
Patch by Justice Adams!
Made llvm-objdump --all-headers output match the order of GNU objdump for compatibility reasons.
Old order of the headers output:
* file header
* section header table
* symbol table
* program header table
* dynamic section
New order of the headers output (GNU compatible):
* file header information
* program header table
* dynamic section
* section header table
* symbol table
(Relevant BugZilla Bug: https://bugs.llvm.org/show_bug.cgi?id=41830)
Differential revision: https://reviews.llvm.org/D67357
llvm-svn: 371826
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
The tool will be very useful for tracking improvements regarding the
"debugging optimized code" support with LLVM ecosystem.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 371520
Adding testscases for this via llvm-dwarfdump.
Also add testcases for the existing resolver support for X86.
Differential Revision: https://reviews.llvm.org/D67340
llvm-svn: 371515
The additional fields will be parsed by the llvm-locstats tool in order to
produce more human readable output of the DWARF debug location quality
generated.
Differential Revision: https://reviews.llvm.org/D66525
llvm-svn: 371506
The address difference between two sections in a PT_LOAD is a constant.
Consider a hypothetical case (pagesize can be very small, say, 4).
```
.text sh_addralign=4
.text.hot sh_addralign=16
```
If we set p_align to 4, the PT_LOAD will be loaded at an address which
is a multiple of 4. The address of .text.hot is guaranteed to be a
multiple of 4, but not necessarily a multiple of 16.
This patch deletes the constraint
if (SHeader->sh_offset == PHeader.p_offset)
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D67260
llvm-svn: 371501
This fixes a bug as well. When "FileSize:" (p_filesz) is specified and
different from the actual value, the following code probably should not
use PHeader.p_filesz:
if (SHeader->sh_offset == PHeader.p_offset + PHeader.p_filesz)
PHeader.p_memsz += SHeader->sh_size;
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67256
llvm-svn: 371420
The aim of this patch is to refactor how we handle and report error.
I suggest to use the same approach we use in LLD: delayed error reporting.
For that I introduced 'HasError' flag which triggers when we report an error.
Now we do not exit instantly on any error. The benefits are:
1) There are no more 'exit(1)' calls in the library code.
2) Code was simplified significantly in a few places.
3) It is now possible to print multiple errors instead of only one.
Also, I changed the messages to be lower case and removed a full stop.
Differential revision: https://reviews.llvm.org/D67182
llvm-svn: 371380
It was pointed out that I had hard-coded PlatformKind. This is rectifying that.
Differential Revision: https://reviews.llvm.org/D67255
llvm-svn: 371248
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40785.
llvm-readelf does not print the st_value of the symbol when
st_value has any non-visibility bits set.
This patch:
* Aligns "Ndx" row for the default and a new cases.
(it was 1 space character off for the case when "PROTECTED" visibility was printed)
* Prints "[<other>: 0x??]" for symbols which has an additional st_other bits set.
In compare with GNU, this logic is a bit simpler and seems to be more consistent.
For MIPS GNU can print named flags, though can't print a mix of them:
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 NOTYPE GLOBAL DEFAULT [OPTIONAL] UND a1
2: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PLT] UND a2
3: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS PIC] UND a3
4: 00000000 0 NOTYPE GLOBAL DEFAULT [MICROMIPS] UND a4
5: 00000000 0 NOTYPE GLOBAL DEFAULT [MIPS16] UND a5
6: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: c] UND b1
7: 00000000 0 NOTYPE GLOBAL DEFAULT [<other>: 28] UND b2
On PPC64 it can print a localentry value that is encoded in the high bits of st_other
63: 0000000000000850 208 FUNC GLOBAL DEFAULT [<localentry>: 8] 12
We chose to print the raw st_other field, prefixed with '0x'.
Differential revision: https://reviews.llvm.org/D67094
llvm-svn: 371201
`struct Elf*_Shdr` has a field `sh_offset`, named `ShOffset` in
llvm::ELFYAML::Section. Rename SHOffset (e_shoff) to SHOff to prevent confusion.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67254
llvm-svn: 371185
Summary: It says [[ http://www.sco.com/developers/gabi/latest/ch4.eheader.html | here ]] that if there are no program headers than e_phoff should be 0, but currently it is always set after the header. GNU's `readelf` (but not `llvm-readelf`) complains about this: `readelf: Warning: possibly corrupt ELF header - it has a non-zero program header offset, but no program headers`.
Reviewers: jhenderson, grimar, MaskRay, rupprecht
Reviewed By: jhenderson, grimar, MaskRay
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67054
llvm-svn: 371162
See http://lists.llvm.org/pipermail/llvm-dev/2019-February/130583.html
and D60242 for the lld partition feature.
This patch:
* Teaches yaml2obj to parse the 3 section types.
* Teaches llvm-readobj/llvm-readelf to dump the 3 section types.
There is no test for SHT_LLVM_DEPENDENT_LIBRARIES in llvm-readobj. Add
it as well.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D67228
llvm-svn: 371157
Linkers (ld.bfd/gold/lld) place the section header table at the very
end. This allows tools to strip it, which is optional in executable/shared objects.
In addition, if we add or section, the size of the section header table
will change. Placing the section header table in the end keeps section
offsets unchanged.
yaml2obj currently places the section header table immediately after the
program header. Follow what linkers do to make offset updating easier.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67221
llvm-svn: 371074
D62179 introduced a regression. llvm-readelf lose the ability to dump the dynamic symbols
when there is .dynamic section with a DT_SYMTAB, but there are no program headers:
https://reviews.llvm.org/D62179#1652778
Below is a program flow before the D62179 change:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => don't try to parse it.
3) Print dynamic symbols using information about them found on step (1).
And after the change it became:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => find SHT_DYNAMIC.
3) Parse dynamic table, but fail to handle the DT_SYMTAB because of the absence of the PT_LOAD. Report the "Virtual address is not in any segment" error.
This patch fixes the issue. For doing this it checks that the value of DT_SYMTAB was
mapped to a segment. If not - it ignores it.
Differential revision: https://reviews.llvm.org/D67078
llvm-svn: 371071
Fix: added missing return "return 0;"
Original commit message:
This eliminates one of the error(1) call in this lib.
It is different from the others because happens on a fields mapping stage
and can be easily fixed.
Differential revision: https://reviews.llvm.org/D67150
llvm-svn: 371030
This eliminates one of the error(1) call in this lib.
It is different from the others because happens on a fields mapping stage
and can be easily fixed.
Differential revision: https://reviews.llvm.org/D67150
llvm-svn: 371023
PT_GNU_STACK is used in an llvm-objcopy test.
I plan to use PT_GNU_RELRO in a patch to improve nested segment
processing in llvm-objcopy (PR42963).
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67146
llvm-svn: 370857
Add a mode in which profile read errors are not immediately treated as
fatal. In this mode, merging makes forward progress and reports failure
only if no inputs can be read.
Differential Revision: https://reviews.llvm.org/D66985
llvm-svn: 370827
The check needs to validate a counter offset before performing pointer
arithmetic with the (potentially corrupt) offset.
Found by UBSan's pointer overflow check.
rdar://54843625
Differential Revision: https://reviews.llvm.org/D66979
llvm-svn: 370826
Fix: add a 'consumeError()' call to ObjectFile.cpp.
This error was never checked.
Original commit message:
It adds a test case for a problem fixed by D66976 <https://reviews.llvm.org/D66976>.
It was introduced by me in D66089 <https://reviews.llvm.org/D66089>.
The error reported was never consumed because of a wrong variable name used,
so it could fail when LLVM_ENABLE_ABI_BREAKING_CHECKS is used.
Differential revision: https://reviews.llvm.org/D67002
llvm-svn: 370669
It adds a test case for a problem fixed by D66976.
It was introduced by me in D66089.
The error reported was never consumed because of a wrong variable name used,
so it could fail when LLVM_ENABLE_ABI_BREAKING_CHECKS is used.
Differential revision: https://reviews.llvm.org/D67002
llvm-svn: 370661
Owen Reynolds