There are no reasons for them to be STV_DEFAULT,
recently bfd did the same change.
Differential revision: https://reviews.llvm.org/D44566
llvm-svn: 327983
Choosing a Shift2 value based on wordsize is cargo-culted from gold.
Assuming that djb hash is a good hash function, choosing bits [4,9]
shouldn't be any worse or better than choosing bits [5,10]. We shouldn't
have copied that behavior that we can't justify in the first place.
Differential Revision: https://reviews.llvm.org/D44547
llvm-svn: 327921
We found that when you pass --allow-multiple-definitions or `-z muldefs`
to GNU linkers, they don't complain about duplicate symbols at all. They
don't even print out warnings on it. We emit warnings in that case.
If you pass --fatal-warnings, that difference results in a link failure.
Differential Revision: https://reviews.llvm.org/D44549
llvm-svn: 327920
This patch adds changes to start supporting the Power 64-Bit ELF V2 ABI.
This includes:
- Changing the ElfSym::GlobalOffsetTable to be named .TOC.
- Creating a GotHeader so the first entry in the .got is .TOC.
- Setting the e_flags to be 1 for ELF V1 and 2 for ELF V2
Differential Revision: https://reviews.llvm.org/D44483
llvm-svn: 327871
This is the same as 327248 except Arm defining _GLOBAL_OFFSET_TABLE_ to
be the base of the .got section as some existing code is relying upon it.
For most Targets the _GLOBAL_OFFSET_TABLE_ symbol is expected to be at
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64 and AArch64 will use the .got.plt. Arm, Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327823
This change broke ARM code that expects to be able to add
_GLOBAL_OFFSET_TABLE_ to the result of an R_ARM_REL32.
I will provide a reproducer on llvm-commits.
llvm-svn: 327688
Patch teaches LLD to print BYTE/SHORT/LONG/QUAD and
location move commands to the map file.
Differential revision: https://reviews.llvm.org/D44004
llvm-svn: 327612
This is an option to print out a table of symbols and filenames.
The output format of this option is the same as GNU, so that it can be
processed by the same scripts as before after migrating from GNU to lld.
This option is mildly useful; we can live without it. But it is pretty
convenient sometimes, and it can be implemented in 50 lines of code, so
I think lld should support this option.
Differential Revision: https://reviews.llvm.org/D44336
llvm-svn: 327565
This "fixes" PR36678 by just producing an error when we find a case
where we would produce an plt entry that used ebx but ebx would not be
set.
llvm-svn: 327542
Currently, we can end up with NBuckets==0 and android loader
does not like it (PR36537).
Seems we can go with a minimal amount of changes here for simplicity
and be consistent with gold and so just always use >= 1 value for NBuckets.
Differential revision: https://reviews.llvm.org/D44422
llvm-svn: 327481
This finishes PR35877.
INSERT BEFORE used similar to INSERT AFTER,
it inserts sections before the given target section.
Differential revision: https://reviews.llvm.org/D44380
llvm-svn: 327378
This is part of PR36515.
With some linkerscripts it is possible to get file offset overlaps
and overflows. Currently LLD checks overlaps in checkNoOverlappingSections().
And also we allow broken output with --no-inhibit-exec.
Problem is that sometimes final offset of sections is completely broken
and we calculate output file size wrong and might crash.
Patch implements check to verify that there is no output section
which offset exceeds file size.
Differential revision: https://reviews.llvm.org/D43819
llvm-svn: 327376
This fixes PR36598.
LLD currently crashes when we have empty output section
with SHF_LINK_ORDER flag. This might happen if we place an
empty synthetic section in the linker script, but keep output
section alive with the use of additional symbol, for example.
The patch fixes the issue by dropping all special flags
for empty sections.
Differential revision: https://reviews.llvm.org/D44376
llvm-svn: 327374
AFTER keyword is mandatory and consume() was
used by mistake here. We accepted broken script before
this patch, testcase shows the issue.
llvm-svn: 327260
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64, Arm and AArch64 will use the .got.plt. Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327248
This avoids creating multiple thunks for symbols with aliases or which
belong to ICF'd sections. This patch reduces the size of Chromium for
Android by 260KB (0.8% of .text).
Differential Revision: https://reviews.llvm.org/D44284
llvm-svn: 327154
Our code assumes all input sections in an output SHF_LINK_ORDER
section has SHF_LINK_ORDER flag. We do not check that and that can cause a crash.
That happens because we call
std::stable_sort(Sections.begin(), Sections.end(), compareByFilePosition);,
where compareByFilePosition predicate does not expect to see
null when calls getLinkOrderDep.
The same might happen when sections refer to non-regular sections.
Test cases demonstrate the issues, patch fixes them.
Differential revision: https://reviews.llvm.org/D44193
llvm-svn: 327006
This implements INSERT AFTER in a following way:
During reading scripts it collects all insert statements.
After we done and read all files it inserts statements into script commands list.
With that:
* Rest of code does know nothing about INSERT.
* Approach is straightforward and have no visible limitations.
* It is also easy to support INSERT BEFORE (was seen in clang code once).
* Should work for PR35877 and similar cases.
Cons:
* It assumes we have "main" scripts that describes sections.
Differential revision: https://reviews.llvm.org/D43468
llvm-svn: 327003
We don't need to handle an object file having more than one symbol table,
so as soon as we find the first one, we can process it and then return
from the function.
llvm-svn: 326977
addElfSymbols and readJustSymbolsFile still has duplicate code, but
I didn't come up with a good idea to eliminate them. Since this patch
is an improvement, I'm sending this for review.
Differential Revision: https://reviews.llvm.org/D44187
llvm-svn: 326972
It was raised during the review of D43819.
LLD usually use [X, Y] for reporting ranges, like below:
"relocation R_386_16 out of range: 65536 is not in [0, 65535]"
Patch changes rangeToString() to do the same.
Differential revision: https://reviews.llvm.org/D44207
llvm-svn: 326918
Summary:
I originally tried to simplify code and then noticed that lld doesn't
do what it tells to the user by warn(). It says "unable to order
discarded symbol" but it actually can for sections eliminated by ICF.
With this patch, lld doesn't sort such sections.
Reviewers: jhenderson, rafael
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D44180
llvm-svn: 326911
LLD uses the debug info and debug line sections to determine the location of
e.g. references to undefined symbols, when producing error messages. In the
event that debug info was present, but debug line parsing failed for some
reason, then a nullptr would end up being dereferenced by the location-lookup
code.
Differential Revision: https://reviews.llvm.org/D44205
Reviewers: grimar
llvm-svn: 326899
With fix: add missing "RUN:" prefix to test case.
Original commit message:
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326895
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326892
Currently, LLD segfaults when linker script attempts to discard
one of the hash sections. This patch fixes that.
Differential revision: https://reviews.llvm.org/D44012
llvm-svn: 326891
It looks like the problem that caused us to originally warn instead of
error was that of a symbol being assigned to the same version twice.
Now we don't warn if a symbol is assigned to the same version twice,
but error if it is assigned to multiple.
This fixes pr28342.
llvm-svn: 326813
We do not expand memory region correctly for following scripts:
.foo.1 :
{
*(.foo.1)
. += 0x1000;
} > ram
Patch generalizes expanding of output sections and memory
regions in one place and fixes the issue.
Differential revision: https://reviews.llvm.org/D43999
llvm-svn: 326688
"division by zero" or "modulo by zero" are not
very informative errors and even probably confusing
as does not let to know that error is coming from linker script.
Patch adds location reporting.
Differential revision: https://reviews.llvm.org/D43934
llvm-svn: 326686
LLD can not catch a memory area overflow when using a data command.
If we have the script below:
.foo :
{
*(.foo)
BYTE(0x1)
} > ram
where BYTE overflows the ram region, we do not report it currently.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D43948
llvm-svn: 326545
GNU linkers by convention supports both `--foo bar` and `--foo=bar` styles
for all long options that take arguments.
Differential Revision: https://reviews.llvm.org/D43972
llvm-svn: 326506
Summary:
If an executable needs text relocations, it should be marked as such so
that the loader can prepare for text relocations. We currently create a
dummy segment with DT_TEXTREL for that purpose.
Generic ABI as of 2000 [1] mentioned that "Its [DT_TEXTREL's] use
has been superseded by the DF_TEXTREL flag". However, it's actually not
superseded even after 18 years. OpenBSD and musl recognize only DT_TEXTREL.
So we still need to set both.
[1] http://www.sco.com/developers/gabi/2000-07-17/ch5.dynamic.html
Reviewers: rafael
Subscribers: emaste, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D43920
llvm-svn: 326503
With the current code if the script has a PHDRS we always obey and try
to allocate a header. This can cause Min - HeaderSize to underflow.
It looks like bfd actually prints an error for this case. With this
patch we do the same.
Found while looking at pr36515.
llvm-svn: 326441
LLD crashes with broken scripts shown in testcase,
because fails to read memory regon name and accesses
MemoryRegions's element which is nullptr.
Patch fixes it.
Differential revision: https://reviews.llvm.org/D43866
llvm-svn: 326431
This is PR36515.
Currenly if we have a script like .debug_info 0 : { *(.debug_info) },
we would not remove this section and keep it in the output.
That does not work, because it is common case for
debug sections to have a zero address expression.
Patch changes behavior so that we remove only sections
that do not use symbols in its expressions.
Differential revision: https://reviews.llvm.org/D43863
llvm-svn: 326430
Previously, we didn't try to make effort to put .note sections next
to each other in the output file, so two .note sections were likely
to be stored to two separate NOTE segments. That's undesirable because
we should create as few segments as possible in general.
Differential Revision: https://reviews.llvm.org/D43858
llvm-svn: 326410
This should resolve the issue that lld build fails in some hosts
that uses case-insensitive file system.
Differential Revision: https://reviews.llvm.org/D43788
llvm-svn: 326339
We should process symbols inside output section declarations the same way as top-level ones.
Differential Revision: https://reviews.llvm.org/D43008
llvm-svn: 326305
Imagine that we have sections A, B, C, where A == C and
symbol ordering file containing symbols: symC, symB, symA
Previously because of ICF it was possible that final order would be
B, A or B, C. That violates order specified in ordering file.
Patch changes that.
Differential revision: https://reviews.llvm.org/D43234
llvm-svn: 326179
It should be possible to resolve undefined symbols in dynamic libraries
using symbols defined in a linker script.
Differential Revision: https://reviews.llvm.org/D43011
llvm-svn: 326176
This fixes pr36475.
I think this code can be simplified a bit, but I would like to check
in the more direct fix if we are in agreement on the direction and
then refactor.
This is not something that bfd does. The issue is not noticed in bfd
because it keeps fewer sections from the linkerscript in the output.
The reasons why it seems reasonable to do this:
- As George noticed, we would still keep the flags if the output
section had both an empty synthetic section and a regular section
- We need an heuristic to find the flags of output sections. Using the
flags of a synthetic section that would have been there seems a
reasonable heuristic.
llvm-svn: 326137
MIPS ABIs require that if an executable file uses non-PIC model, the
EI_ABIVERSION entry in the ELF header should be incremented from 0 to 1.
That allows obsoleted / limited dynamic linkers refuse to link them.
llvm-svn: 325890
This continues direction started in D43069.
We can keep sections that are explicitly assigned to segment in script.
It helps to simplify code.
Differential revision: https://reviews.llvm.org/D43571
llvm-svn: 325887
Latest patch version now.
Original commit message:
[ELF] - Do not crash with --emit-relocs and --icf=all together.
Previously we would crash because did not mark .rel[a] sections
as dead and they tried to access parent which was not live
after ICF and therefore was null.
Differential revision: https://reviews.llvm.org/D43241
llvm-svn: 325879
Previously we would crash because did not mark .rel[a] sections
as dead and they tried to access parent which was not live
after ICF and therefore was null.
Differential revision: https://reviews.llvm.org/D43241
llvm-svn: 325877
This is for fixing PR36297.
Issue itself is that if we have SECTIONS { .bar (a+b) : { *(.stub) } };
script and no section .stub, when LLD will remove .bar, but
produce output with undefined symbols a and b.
Differential revision: https://reviews.llvm.org/D43069
llvm-svn: 325875
We have an internal program that does't link without this patch. I don't
know of any open-source program that needs this, but there might be.
Since this patch improves compatibility with GNU linkers with a few lines
of code, I think it's worth to be committed.
The problem is about undefined symbols in DSOs. Some programs depend on
the GNU linkers' behavior that they pull out object files from archive
files to resolve undefined symbols in DSOs. We already allow that kind of
"reverse" dependency (from DSOs to the main executable) for regular
symbols, in particular, for "__progname" symbol (which is usually in
crt0.o), but that doesn't work if the symbol is in an archive file.
This patch is to make it work.
Differential Revision: https://reviews.llvm.org/D43658
llvm-svn: 325849
We sometimes need to iterate over input sections for a given
output section. It is not very convinent because we have to iterate
over section descriptions.
Patch introduces getInputSections helper, it simplifies things.
Differential revision: https://reviews.llvm.org/D43574
llvm-svn: 325763
This reverts commit r325679 that was committed without discussion.
Actually, in the discussion thread, most people opposed to have this
option in lld. Reverting that change doesn't mean that this is a
final decision, but that needs to be discussed first.
llvm-svn: 325714
Address @ruiu's post commit review comment about a value which is intended
to be a unsigned 32 bit integer as using uint32_t rather than unsigned.
llvm-svn: 325713
In r324043, --nopie was renamed to --no-pie to presumably fix a typo.
As it turns out, "nopie" wasn't a typo but the spelling used by
OpenBSD's binutils ld. Gold on the other hand spells the flag "no-pie".
(Vanilla binutils doesn't have a flag like this at all.)
Since they do the same thing, let's support both spellings.
llvm-svn: 325679
This patch provides migitation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLD part of
-z hazardplt. Like the Clang part of this patch, I have opted for that
specific option name in case alternative migitation methods are required
in the future.
The mitigation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
For LLD, this changes PLT stubs to use 'jalr.hb' and 'jr.hb'.
Reviewers: atanasyan, ruiu
Differential Revision: https://reviews.llvm.org/D43488
llvm-svn: 325647
Previously wasm used a separate header to declare markLive
and ELF used to declare ICF. This change makes each backend
consistently declare these in their own headers.
Differential Revision: https://reviews.llvm.org/D43529
llvm-svn: 325631
The profailing style in lld seem to be to not include such empty lines.
Clang-tidy/clang-format seem to handle this just fine.
Differential Revision: https://reviews.llvm.org/D43528
llvm-svn: 325629
Summary:
With D43396, no clients use the Path parameter anymore.
This is the lld side fix with D43400.
Depends on D43396 and D43400.
Reviewers: pcc
Subscribers: emaste, inglorion, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D43401
llvm-svn: 325620
Summary:
Before the name of the function sounded like it was just a getter for the
private class member Addend. However, it actually calculates the final
value for the r_addend field in Elf_Rela that is used when writing the
.rela.dyn section. I also added a comment to the UseSymVA member to
explain how it interacts with computeAddend().
Differential Revision: https://reviews.llvm.org/D43161
llvm-svn: 325485
Currently, archive file name is missing in this message. In general,
we should avoid constructing strings in an ad-hoc manner and instead
use toString() to get consistent output strings.
Differential Revision: https://reviews.llvm.org/D43420
llvm-svn: 325416
We are running lld tests with "--full-shutdown" option because we don't
want to call _exit() in lld if it is running tests. Regular shutdown
is needed for leak sanitizer.
This patch changes the way how we tell lld that it is running tests.
Now "--full-shutdown" is removed, and LLD_IN_TEST environment variable
is used instead.
This patch enables full shutdown on all ports, e.g. ELF, COFF and wasm.
Previously, we enabled it only for ELF.
Differential Revision: https://reviews.llvm.org/D43410
llvm-svn: 325413
There seems to be no reason to collect this list of symbols.
Also fix a bug where --exclude-libs would apply to all symbols that
appear in an archive's symbol table, even if the relevant archive
member was not added to the link.
Differential Revision: https://reviews.llvm.org/D43369
llvm-svn: 325380
Now that we have R_ADDEND, UseSymVA was redundant. We only want to
write the symbol virtual address when using an expression other than
R_ADDEND.
llvm-svn: 325360
Summary:
This follows up on r321889 where writing of Elf_Rel addends was partially
moved to RelocationBaseSection. This patch ensures that the addends are
always written to the output section when a input section uses RELA but the
output is REL.
Differential Revision: https://reviews.llvm.org/D42843
llvm-svn: 325328
Previously, we accidentally dropped STB_WEAK bit from an undefined symbol
if there is a lazy object symbol with the same name. That caused a
compatibility issue with GNU gold.
llvm-svn: 325316
Even though it doesn't make sense, there seems to be multiple programs
in the wild that create PC-relative relocations in non-ALLOC sections.
I believe this is caused by the negligence of GNU linkers to not report
any errors for such relocations.
Currently, lld emits warnings against such relocations and exits.
So, you cannot link any program that contains wrong relocations until
you fix an issue in a program that generates wrong ELF files. It's often
impractical to fix a program because it's not always easy.
This patch relaxes the error checking and emit a warning instead.
Differential Revision: https://reviews.llvm.org/D43351
llvm-svn: 325307
When we are emitting a relocatable output, we should keep the original
symbol name including "@" part. Previously, we drop that part unconditionally
which resulted in dropping versions from symbols.
Differential Revision: https://reviews.llvm.org/D43307
llvm-svn: 325204
This patch addresses a minor compatibility issue with GNU linkers.
Previously, --export-dynamic-symbol is completely ignored if you
pass --export-dynamic together.
Differential Revision: https://reviews.llvm.org/D43266
llvm-svn: 325152
There are a number of different situations when symbols are requested
to be ordered in the --symbol-ordering-file that cannot be ordered for
some reason. To assist with identifying these symbols, and either
tidying up the order file, or the inputs, a number of warnings have
been added. As some users may find these warnings unhelpful, due to how
they use the symbol ordering file, a switch has also been added to
disable these warnings.
The cases where we now warn are:
* Entries in the order file that don't correspond to any symbol in the input
* Undefined symbols
* Absolute symbols
* Symbols imported from shared objects
* Symbols that are discarded, due to e.g. --gc-sections or /DISCARD/ linker script sections
* Multiple of the same entry in the order file
Reviewed by: rafael, ruiu
Differential Revision: https://reviews.llvm.org/D42475
llvm-svn: 325125
We sort inside output sections, so all the sections we see should be
InputSectionBase.
I noticed the patch adding callgraph based section ordering used this
type and changing this separately makes the merge easier.
llvm-svn: 325094
This adds an extra level of static safety to our use of placement
new to allocate Symbol types. It prevents the accidental addition
on a non-trivially-destructible member that could allocate and
leak memory.
From the spec: Storage occupied by trivially destructible objects
may be reused without calling the destructor.
Differential Revision: https://reviews.llvm.org/D43244
llvm-svn: 325025
In order to identify a compressed section, we check if a section name
starts with ".zdebug" or the section has SHF_COMPRESSED flag. We already
use the knowledge in this function. So hiding that check in
isCompressedELFSection doesn't make sense.
llvm-svn: 324951
When decompressing a compressed debug section, we drop SHF_COMPRESSED
flag but we didn't drop "z" in ".zdebug" section name. This patch does
that for consistency.
This change also fixes the issue that .zdebug_gnu_pubnames are not
dropped when we are creating a .gdb_index section.
llvm-svn: 324949
GNU gold doesn't print out ICF sections for -verbose. It only shows
them for -print-icf-sections. We printed out them for -verbose because
we didn't have -print-icf-sections. Now that we have the option, there's
no reason to print out for -verbose.
Differential Revision: https://reviews.llvm.org/D43100
llvm-svn: 324755
This is for compatiblity with GNU gold. GNU gold tries to resolve
symbols specified by --export-dynamic-symbol. So, if a symbol specified
by --export-dynamic-symbol is in an archive file, lld's result is
currently different from gold's.
Interestingly, that behavior is different for --dynamic-list.
I added a new test to ensure that.
Differential Revision: https://reviews.llvm.org/D43103
llvm-svn: 324752
This is a bit more verbose, but it has a few advantages.
The logic on what to do with special sections like .init_array is not
duplicated. Before we would need keep isKnownNonreorderableSection in
sync.
I think with this the call graph based sorting can be implemented by
"just" returning a new order from buildSectionOrder.
llvm-svn: 324744
Previously, multiple chunks of --print-icf-sections messages were interleaved
and didn't make sense. This is because forEachClass is multi-threaded.
llvm-svn: 324683
When you omit an argument, most options fall back to their defaults.
For example, --color-diagnostics is a synonym for --color-diagnostics=auto.
We don't have a way to specify the default choice for --build-id, so we
can't describe --build-id (without an argument) in that way.
This patch adds "fast" for the default build-id choice.
Differential Revision: https://reviews.llvm.org/D43032
llvm-svn: 324502
MIPS BFD linker puts _gp_disp symbol into DSO files and assigns zero
version definition index to it. This value means 'unversioned local
symbol' while _gp_disp is a section global symbol. We have to handle
this bug in the LLD because BFD linker is used for building MIPS
toolchain libraries.
Differential revision: https://reviews.llvm.org/D42486
llvm-svn: 324467
This is PR35740 which now crashes
because we remove unused synthetic sections incorrectly.
We can keep input section description and corresponding output
section live even if it must be empty and dead.
This results in a crash because SHF_LINK_ORDER handling code
tries to access first section which is nullptr in this case.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D42681
llvm-svn: 324463
Previously --defsym=foo2=etext+2 would produce incorrect value
for foo2 because expressions did not work correctly with
reserved symbols, section offset was calculated wrong for them.
Fixes PR35744.
Differential revision: https://reviews.llvm.org/D42911
llvm-svn: 324461
Previously we ignored -plugin-opt=mcpu=<xxx>
and the only way to set CPU string was to pass
-mllvm -mcpu=<xxx>
Though clang may pass it with use of plugin options:
-plugin-opt=mcpu=x86-64
Since we are trying to be compatible in command line
with gold plugin, seems we should support it too.
Differential revision: https://reviews.llvm.org/D42956
llvm-svn: 324459
objects, it confuses codegen into generating pc-rel relocations for those
symbols, which leads to linker errors.
Differential Revision: https://reviews.llvm.org/D42977
llvm-svn: 324435
I tested that if I remove "elf" from the message, building a program
that uses libtool prints
checking whether to build shared libraries... no
but with this patch it still prints
checking whether to build shared libraries... yes
llvm-svn: 324428
In lld this was the only use of Config->Static where it meant anything
else other than "use .a instead of .so".
If a program turns out to not use any dynamic libraries, we should
produce the same result with and without -static.
llvm-svn: 324421
With fix:
Keep logic that ignores -plugin-opt=mcpu=x86-64 -plugin-opt=thinlto,
add checks for those to testcases.
Original commit message:
[ELF] - Use InitTargetOptionsFromCodeGenFlags/ParseCommandLineOptions for parsing LTO options.
gold plugin uses InitTargetOptionsFromCodeGenFlags +
ParseCommandLineOptions for parsing LTO options.
Patch do the same change for LLD.
Such change helps to avoid parsing/whitelisting LTO
plugin options again on linker side, what can help LLD
to automatically support new -plugin-opt=xxx options
passed.
Differential revision: https://reviews.llvm.org/D42733
llvm-svn: 324340
gold plugin uses InitTargetOptionsFromCodeGenFlags +
ParseCommandLineOptions for parsing LTO options.
Patch do the same change for LLD.
Such change helps to avoid parsing/whitelisting LTO
plugin options again on linker side, what can help LLD
to automatically support new -plugin-opt=xxx options
passed.
Differential revision: https://reviews.llvm.org/D42733
llvm-svn: 324322
When using Elf_Rela every tool should use the addend in the
relocation.
We have --apply-dynamic-relocs to work around bugs in tools that don't
do that.
The default value of --apply-dynamic-relocs should be false to make
sure these bugs are more easily found in the future.
llvm-svn: 324264
When resolving dynamic RELA relocations the addend is taken from the
relocation and not the place being relocated. Accordingly lld does not
write the addend field to the place like it would for a REL relocation.
Unfortunately there is some system software, in particlar dynamic loaders
such as Bionic's linker64 that use the value of the place prior to
relocation to find the offset that they have been loaded at. Both gold
and bfd control this behavior with the --[no-]apply-dynamic-relocs option.
This change implements the option and defaults it to true for compatibility
with gold and bfd.
Differential Revision: https://reviews.llvm.org/D42797
llvm-svn: 324221
Fangrui Song