MIPS ABI requires creation of the MIPS_RLD_MAP dynamic tag for non-PIE
executables only and MIPS_RLD_MAP_REL tag for both PIE and non-PIE
executables. The patch skips definition of the MIPS_RLD_MAP for PIE
files and defines MIPS_RLD_MAP_REL.
The MIPS_RLD_MAP_REL tag stores the offset to the .rld_map section
relative to the address of the tag itself.
Differential Revision: https://reviews.llvm.org/D43347
llvm-svn: 329996
If all references to a DSO happen to be weak, and if the DSO is
specified with --as-needed, the DSO is not added to DT_NEEDED.
If that happens, we also need to eliminate shared symbols created
from the DSO. Otherwise, they become dangling references that point
to non-exsitent DSO.
Fixes https://bugs.llvm.org/show_bug.cgi?id=36991
Differential Revision: https://reviews.llvm.org/D45536
llvm-svn: 329960
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 329696
I'm proposing a new command line flag, --warn-backrefs in this patch.
The flag and the feature proposed below don't exist in GNU linkers
nor the current lld.
--warn-backrefs is an option to detect reverse or cyclic dependencies
between static archives, and it can be used to keep your program
compatible with GNU linkers after you switch to lld. I'll explain the
feature and why you may find it useful below.
lld's symbol resolution semantics is more relaxed than traditional
Unix linkers. Therefore,
ld.lld foo.a bar.o
succeeds even if bar.o contains an undefined symbol that have to be
resolved by some object file in foo.a. Traditional Unix linkers
don't allow this kind of backward reference, as they visit each
file only once from left to right in the command line while
resolving all undefined symbol at the moment of visiting.
In the above case, since there's no undefined symbol when a linker
visits foo.a, no files are pulled out from foo.a, and because the
linker forgets about foo.a after visiting, it can't resolve
undefined symbols that could have been resolved otherwise.
That lld accepts more relaxed form means (besides it makes more
sense) that you can accidentally write a command line or a build
file that works only with lld, even if you have a plan to
distribute it to wider users who may be using GNU linkers. With
--check-library-dependency, you can detect a library order that
doesn't work with other Unix linkers.
The option is also useful to detect cyclic dependencies between
static archives. Again, lld accepts
ld.lld foo.a bar.a
even if foo.a and bar.a depend on each other. With --warn-backrefs
it is handled as an error.
Here is how the option works. We assign a group ID to each file. A
file with a smaller group ID can pull out object files from an
archive file with an equal or greater group ID. Otherwise, it is a
reverse dependency and an error.
A file outside --{start,end}-group gets a fresh ID when
instantiated. All files within the same --{start,end}-group get the
same group ID. E.g.
ld.lld A B --start-group C D --end-group E
A and B form group 0, C, D and their member object files form group
1, and E forms group 2. I think that you can see how this group
assignment rule simulates the traditional linker's semantics.
Differential Revision: https://reviews.llvm.org/D45195
llvm-svn: 329636
Currently LLD sets OutSecOff in addSection for input sections.
That is a fake offset (just a rude approximation to remember the order),
used for sorting SHF_LINK_ORDER sections
(see resolveShfLinkOrder, compareByFilePosition).
There are 2 problems with such approach:
1. We currently change and reuse Size field as a value assigned. Changing size is
not good because leads to bugs. Currently, SIZEOF(.bss) for empty .bss returns 2
because we add two empty synthetic sections and increase size twice by 1.
(See PR37011: https://bugs.llvm.org/show_bug.cgi?id=37011)
2. Such approach simply does not work when --symbol-ordering-file is involved,
because processing of the ordering file might break the initial section order.
This fixes PR37011.
Differential revision: https://reviews.llvm.org/D45368
llvm-svn: 329560
This is for PR36716 and
this enables emitting STT_FILE symbols.
Output size affect is minor:
lld binary size changes from 52,883,408 to 52,949,400
clang binary size changes from 83,136,456 to 83,219,600
Differential revision: https://reviews.llvm.org/D45261
llvm-svn: 329557
Some system libraries have a lot of versioned symbols. When linking
scylla this brings the number of malloc calls from 49154 to 37944.
llvm-svn: 329453
Currently there are a few odd things about the warning about symbols
that cannot be ordered. This patch fixes:
* When there is an undefined symbol that resolves to a shared file, we
were printing the location of the undefined reference.
* If there are multiple comdats, we were reporting them all.
llvm-svn: 329371
This is similar to r329219, but for the entire section. Like r329219 I
don't expect this to have any real impact, it is just more consistent
and simpler.
llvm-svn: 329367
Previously, "size" column is 9 characters long which is too long
at least for 32-bit (because at maximum it needs 8 columns). This
patch make it one column shorter than before. That's also a reasonable
default for 64-bit.
llvm-svn: 329317
As was mentioned in comments for D45158,
isPicRel's name does not make much sense,
because what this method does is checks if
we need to create the dynamic relocation or not.
Instead of renaming it to something different,
we can 'isPicRel' completely.
We can reuse the getDynRel method.
They are logically very close, getDynRel can just return
R_*_NONE in case no dynamic relocation should be produced
and that would simplify things and avoid functionality
correlation/duplication with 'isPicRel'.
The patch does this change.
Differential revision: https://reviews.llvm.org/D45248
llvm-svn: 329275
Currently, LLD print symbol assignment commands to the map file,
but it does not do that for assignments that are outside of the section
descriptions. Such assignments can affect the layout though.
The patch implements the following:
* Teaches LLD to print symbol assignments outside of section declaration.
* Teaches LLD to print PROVIDE/HIDDEN/PROVIDE hidden commands.
In case when symbol is not provided, nothing will be printed.
Differential revision: https://reviews.llvm.org/D44894
llvm-svn: 329272
Currently, LLD prints VA, but not LMA in a map file.
It seems can be useful to print both to reveal layout
details and patch implements it.
Differential revision: https://reviews.llvm.org/D44899
llvm-svn: 329271
We were ignoring the addend if the piece was dead. I don't expect this
to make a difference in any real world situations, but it is simpler
anyway.
llvm-svn: 329219
isPicRel is used to check if we want to create the dynamic relocations.
Not all of the dynamic relocations we create are passing through this
check, but those that are, probably better be whitelisted.
Differential revision: https://reviews.llvm.org/D45252
llvm-svn: 329203
In the lld perf builder r328686 had a negative impact in
stalled-cycles-frontend. Somehow that stat is not showing on my
machine, but the attached patch shows an improvement on cache-misses,
which is probably a reasonable proxy.
My working theory is that given a large input the pieces vector is out
of cache by the time initOffsetMap runs.
Both finalizeContents implementation have a convenient location for
initializing the OffsetMap, so this seems the best solution.
llvm-svn: 329117
Summary:
r328610 fixed a data race in the COFF linker. This change makes a
similar fix to the ELF linker.
Reviewers: ruiu, pcc, rnk
Reviewed By: ruiu
Subscribers: emaste, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D45192
llvm-svn: 329088
Added checks to test that we do not produce
output where VA of sections overruns the address
space available.
Differential revision: https://reviews.llvm.org/D43820
llvm-svn: 329063
This fixes PR36927.
The issue is next. Imagine we have -Ttext 0x7c and code below.
.code16
.global _start
_start:
movb $_start+0x83,%ah
So we have R_386_8 relocation and _start at 0x7C.
Addend is 0x83 == 131. We will sign extend it to 0xffffffffffffff83.
Now, 0xffffffffffffff83 + 0x7c gives us 0xFFFFFFFFFFFFFFFF.
Techically 0x83 + 0x7c == 0xFF, we do not exceed 1 byte value, but
currently LLD errors out, because we use checkUInt<8>.
Let's try to use checkInt<8> now and the following code to see if it can help (no):
main.s:
.byte foo
input.s:
.globl foo
.hidden foo
foo = 0xff
Here, foo is 0xFF. And addend is 0x0. Final value is 0x00000000000000FF.
Again, it fits one byte well, but with checkInt<8>,
we would error out it, so we can't use it.
What we want to do is to check that the result fits 1 byte well.
Patch changes the check to checkIntUInt to fix the issue.
Differential revision: https://reviews.llvm.org/D45051
llvm-svn: 329061
Having 8/16 bits dynamic relocations is incorrect.
Both gold and bfd (built from latest sources) disallow
that too.
Differential revision: https://reviews.llvm.org/D45158
llvm-svn: 329059
OffsetMap maps to a SectionPiece index, but we were not taking
advantage of that in getSectionPiece.
With this patch both getOffset and getSectionPiece use OffsetMap and
the binary search is moved to findSectionPiece.
llvm-svn: 329044
They are to pull out an object file for a symbol, but for a historical
reason the code is written in two separate functions. This patch
merges them.
llvm-svn: 329039
Rafael Espindola