Summary:
This patch introduces two new function attributes
InaccessibleMemOnly: This attribute indicates that the function may only access memory that is not accessible by the program/IR being compiled. This is a weaker form of ReadNone.
inaccessibleMemOrArgMemOnly: This attribute indicates that the function may only access memory that is either not accessible by the program/IR being compiled, or is pointed to by its pointer arguments. This is a weaker form of ArgMemOnly
Test cases have been updated. This revision uses this (d001932f3a) as reference.
Reviewers: jmolloy, hfinkel
Subscribers: reames, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D15499
llvm-svn: 255778
This patch adds optional fast-math-flags (the same that apply to fmul/fadd/fsub/fdiv/frem/fcmp)
to call instructions in IR. Follow-up patches would use these flags in LibCallSimplifier, add
support to clang, and extend FMF to the DAG for calls.
Motivating example:
%y = fmul fast float %x, %x
%z = tail call float @sqrtf(float %y)
We'd like to be able to optimize sqrt(x*x) into fabs(x). We do this today using a function-wide
attribute for unsafe-math, but we really want to trigger on the instructions themselves:
%z = tail call fast float @sqrtf(float %y)
because in an LTO build it's possible that calls with fast semantics have been inlined into a
function with non-fast semantics.
The code changes and tests are based on the recent commits that added "notail":
http://reviews.llvm.org/rL252368
and added FMF to fcmp:
http://reviews.llvm.org/rL241901
Differential Revision: http://reviews.llvm.org/D14707
llvm-svn: 255555
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
llvm-svn: 252368
This attribute allows the compiler to assume that the function never recurses into itself, either directly or indirectly (transitively). This can be used among other things to demote global variables to locals.
llvm-svn: 252282
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
We used automated tools to update our IR to its current syntax in commit
21f77df7(r247378). While it correctly updated the CHECK lines in our
compatibility tests, the IR should have remained untouched. This commit
fixes the syntax errors.
llvm-svn: 251458
Use 10 bits to represent calling convention ID's instead of 13, and
update the bitcode compatibility tests accordingly. We now error-out in
the bitcode reader when we see bad calling conv ID's.
Thanks to rnk and dexonsmith for feedback!
Differential Revision: http://reviews.llvm.org/D13826
llvm-svn: 251452
Processing bitcode from a different LLVM version can lead to
unexpected behavior. The LLVM project guarantees autoupdating
bitcode from a previous minor revision for the same major, but
can't make any promise when reading bitcode generated from a
either a non-released LLVM, a vendor toolchain, or a "future"
LLVM release. This patch aims at being more user-friendly and
allows a bitcode produce to emit an optional block at the
beginning of the bitcode that will contains an opaque string
intended to describe the bitcode producer information. The
bitcode reader will dump this information alongside any error it
reports.
The optional block also includes an "epoch" number, monotonically
increasing when incompatible changes are made to the bitcode. The
reader will reject bitcode whose epoch is different from the one
expected.
Differential Revision: http://reviews.llvm.org/D13666
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 251325
Summary:
The change to use the VST function entries for lazy deserialization did
not handle the case of anonymous functions without aliases. In that case
we must fall back to scanning the function blocks as there is no VST
entry.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tstellarAMD, llvm-commits
Differential Revision: http://reviews.llvm.org/D13596
llvm-svn: 249947
Summary:
The bitcode format is described in this document:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
For more info on ThinLTO see:
https://sites.google.com/site/llvmthinlto
The first customer is ThinLTO, however the data structures are designed
and named more generally based on prior feedback. There are a few
comments regarding how certain interfaces are used by ThinLTO, and the
options added here to gold currently have ThinLTO-specific names as the
behavior they provoke is currently ThinLTO-specific.
This patch includes support for generating per-module function indexes,
the combined index file via the gold plugin, and several tests
(more are included with the associated clang patch D11908).
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13107
llvm-svn: 249270
Summary:
This also adds the first set of tests for operand bundles.
The optimizer has not been audited to ensure that it does the right
thing with operand bundles.
Depends on D12456.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: maksfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12457
llvm-svn: 248551
This reverts commit r247898 (which reverted r247894).
Patch fixed to address two issues exposed by buildbots:
- unused variable warning in NDEBUG mode
- std::initializer_list lifetime issue causing test failures
Original Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247927
Temporarily revert to fix some buildbot issues. One is a minor issue
with a variable unused in NDEBUG mode. More concerning are some test
failures on win7 that I need to dig into.
This reverts commit 4e66a74543459832cfd571db42b4543580ae1d1d.
llvm-svn: 247898
Summary:
Support for including the function bitcode indices in the Value Symbol
Table. This requires writing the VST after the function blocks, which in
turn requires a new VST forward declaration record encoding the offset of
the full VST (which is backpatched to contain the offset after the VST
is written).
This patch also enables the lazy function reader to use the new function
indices out of the VST. This support will be used by ThinLTO as well, which
will be in a follow on patch. Backwards compatibility with older bitcode
files is maintained.
A new test is also included.
The bitcode format (used for the lazy reader as well as the upcoming
ThinLTO patches) came out of discussions with Duncan and others and is
described here:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12536
llvm-svn: 247894
The rest of the EH pads are fine, since they have at most one label and
take fewer operands for the personality.
Old catchpad vs. new:
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)] to label %__except.ret.10 unwind label %catchendblock.9
-----
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)]
to label %__except.ret.10 unwind label %catchendblock.9
llvm-svn: 247433
This test stresses verify-uselistorder. PR24755 is caused by our
ignoring uses when they occur in the function personality slot, the
prologue data slot, or the prefix data slot.
llvm-svn: 247292
Summary:
Constant vectors weren't allowed to have an i1 condition in the
BitcodeReader. Make sure we have the same restrictions that are
documented, not more.
Reviewers: nlewycky, rafael, kschimpf
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12440
llvm-svn: 246459
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
llvm-svn: 245029
This fixes a bug found while working on the bitcode reader. In
particular, the method BitstreamReader::AtEndOfStream doesn't always
behave correctly when processing a data streamer. The method
fillCurWord doesn't properly set CurWord/BitsInCurWord if the data
streamer was already at eof, but GetBytes had not yet set the
ObjectSize field of the streaming memory object.
This patch fixes this problem, and provides a test to show that
this problem has been fixed.
Patch by Karl Schimpf.
Differential Revision: http://reviews.llvm.org/D11391
llvm-svn: 243890
Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.
Almost all the testcases were updated with this script:
git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'
I imagine something similar should work for out-of-tree testcases.
llvm-svn: 243885
* generate function with string attribute using API,
* dump it in LL format,
* try to parse.
Add parser support for string attributes to fix the issue.
Reviewed By: reames, hfinkel
Differential Revision: http://reviews.llvm.org/D11058
llvm-svn: 243877
Successive versions of LLVM should retain the ability to parse bitcode
generated by old releases of the compiler. This adds a bitcode format
compatibility test, which is intended to provide good (albeit not
entirely exhaustive) coverage of the current LangRef.
This also includes compatibility tests for LLVM 3.6. After every 3.X.0
release, the compatibility.ll file from the 3.X branch should be copied
to compatibility-3.X.ll on trunk, and the 3.X.0 release used to generate
a corresponding bitcode file.
Patch by Vedant Kumar!
llvm-svn: 243779
Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags,
using `DW_TAG_variable` in their place Stop exposing the `tag:` field at
all in the assembly format for `DILocalVariable`.
Most of the testcase updates were generated by the following sed script:
find test/ -name "*.ll" -o -name "*.mir" |
xargs grep -l 'DILocalVariable' |
xargs sed -i '' \
-e 's/tag: DW_TAG_arg_variable, //' \
-e 's/tag: DW_TAG_auto_variable, //'
There were only a handful of tests in `test/Assembly` that I needed to
update by hand.
(Note: a follow-up could change `DILocalVariable::DILocalVariable()` to
set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable`
(as appropriate), instead of having that logic magically in the backend
in `DbgVariable`. I've added a FIXME to that effect.)
llvm-svn: 243774
This change adds new attribute called "argmemonly". Function marked with this attribute can only access memory through it's argument pointers. This attribute directly corresponds to the "OnlyAccessesArgumentPointees" ModRef behaviour in alias analysis.
Differential Revision: http://reviews.llvm.org/D10398
llvm-svn: 241979
FCmp behaves a lot like a floating-point binary operator in many ways,
and can benefit from fast-math information. Flags such as nsz and nnan
can affect if this fcmp (in combination with a select) can be treated
as a fminnum/fmaxnum operation.
This adds backwards-compatible bitcode support, IR parsing and writing,
LangRef changes and IRBuilder changes. I'll need to audit InstSimplify
and InstCombine in a followup to find places where flags should be
copied.
llvm-svn: 241901
When trying to upgrade @llvm.x86.sse2.psrl.dq while parsing a module,
BitcodeReader adds the function to its worklist twice, resulting in a
crash when accessing it the second time.
This patch replaces the worklist vector by a map.
Patch by Philip Pfaffe.
llvm-svn: 241281
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
Before this patch the bitcode reader would read a module from a file
that contained in order:
* Any number of non MODULE_BLOCK sub blocks.
* One MODULE_BLOCK
* Any number of non MODULE_BLOCK sub blocks.
* 4 '\n' characters to handle OS X's ranlib.
Since we support lazy reading of modules, any information that is relevant
for the module has to be in the MODULE_BLOCK or before it. We don't gain
anything from checking what is after.
This patch then changes the reader to stop once the MODULE_BLOCK has been
successfully parsed.
This avoids the ugly special case for .bc files in an archive and makes it
easier to embed bitcode files.
llvm-svn: 239845
Source for the test:
@bloom = global <3 x i32> <i32 0, i32 1, i32 42>
Plus bit twiddling to set the vector numelts to 0 (in the bc file).
llvm-svn: 238894
Vaivaswatha Nagaraj