restrictions when choosing a type for small-memcpy inlining in
SelectionDAGBuilder.
This ensures that the loads and stores output for the memcpy won't be further
expanded during legalization, which would cause the total number of instructions
for the memcpy to exceed (often significantly) the inlining thresholds.
<rdar://problem/17829180>
llvm-svn: 234462
The input to compileOptimized is already optimized and internalized, so remove
internalize pass from compileOptimized.
rdar://20227235
llvm-svn: 234446
The bug manifests when there are two loads and two stores chained as follows in
a DAG,
(ld v3f32) -> (st f32) -> (ld v3f32) -> (st f32)
and the stores' values are extracted from the preceding vector loads.
MergeConsecutiveStores would replace the first store in the chain with the
merged vector store, which would create a cycle between the merged store node
and the last load node that appears in the chain.
This commits fixes the bug by replacing the last store in the chain instead.
rdar://problem/20275084
Differential Revision: http://reviews.llvm.org/D8849
llvm-svn: 234430
The code uses a priority queue and a worklist, which share the same
visited set, but the visited set is only updated when inserting into
the priority queue. Instead, switch to using separate visited sets
for the priority queue and worklist.
llvm-svn: 234425
(Re-apply r234361 with a fix and a testcase for PR23157)
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
llvm-svn: 234424
Because -menable-no-nans causes fcmp conditions to be rewritten
without 'o' or 'u' the recognition code in needs to cope. Also
extended it to handle 'le' and 'ge.
Differential Revision: http://reviews.llvm.org/D8725
llvm-svn: 234421
Summary:
Even though there is no 2nd register operand in the "lw/sw $8, symbol" case, we still try to find one,
and we end up with $0, which makes us generate an unnecessary "addu $8, $8, $0" (a.k.a. "move $8, $8").
We can avoid this by checking if the 2nd register operand is different from $0, before generating the addu.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8055
llvm-svn: 234406
Summary:
They are of the form "bnezl/beqzl $rs, offset" and expand to "bnel/beql $rs, $zero, offset".
These instructions are used in Linux inline assembly.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8540
llvm-svn: 234401
One could make the argument for writing it immediately after the ELF header,
but writing it in the middle of the sections like we were doing just makes
it harder for no reason.
llvm-svn: 234400
Summary: Looks like new code from [[ http://reviews.llvm.org/rL222057 | rL222057 ]] doesn't account for early `return` in `ARMFrameLowering::emitPrologue`, which leads to loosing `.cfi_def_cfa_offset` directive for functions without stack frame.
Reviewers: echristo, rengolin, asl, t.p.northover
Reviewed By: t.p.northover
Subscribers: llvm-commits, rengolin, aemerson
Differential Revision: http://reviews.llvm.org/D8606
llvm-svn: 234399
Summary:
These AssemblerPredicate's are unnecessary and actually make some instructions unusable when assembling pre-MIPS32 ISAs.
For example, this was causing the IAS to reject the 'j' instruction for MIPS I-V.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8300
llvm-svn: 234398
Summary:
This patch adds an enum `OverflowCheckFlavor` and a function
`OptimizeOverflowCheck`. This will allow InstCombine to optimize
overflow checks without directly introducing an intermediate call to the
`llvm.$op.with.overflow` instrinsics.
This specific change is a refactoring and does not intend to change
behavior.
Reviewers: majnemer, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8888
llvm-svn: 234388
If two livesegments from different subranges happened to have the same
definition they could possibly end up as two adjacent segments in the
main liverange with the same value number which is not allowed. Detect
such cases and fix them in the 2nd pass of computeFromMainRange() if
necessary.
No testcase as there is only an out-of-tree target where I can sensibly
come up with one.
llvm-svn: 234382
This is currently considered experimental, but most of the more
commonly used instructions should work.
So far only SI has been extensively tested, CI and VI probably work too,
but may be buggy. The current set of tests cases do not give complete
coverage, but I think it is sufficient for an experimental assembler.
See the documentation in R600Usage for more information.
llvm-svn: 234381
We weren't checking the sign of the floating point immediate before translating
it to "fmov sD, wzr". Similarly for D-regs.
Technically "movi vD.2s, #0x80, lsl #24" would work most of the time, but it's
not a blessed alias (and I don't think it should be since people expect writing
sD to zero out the high lanes, and there's no dD equivalent). So an error it is.
rdar://20455398
llvm-svn: 234372
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
llvm-svn: 234361
The current crash reporting on Mac OS is only disabled via an environment variable.
This adds a boolean (default false) which can also disable crash reporting.
The only client right now is the unittests which don't ever want crash reporting, but do want to detect killed programs.
Reduces the time to run the APFloat unittests on my machine from
[----------] 47 tests from APFloatTest (51250 ms total)
to
[----------] 47 tests from APFloatTest (765 ms total)
Reviewed by Reid Kleckner and Justin Bogner
llvm-svn: 234353
This shouldn't affect anything in-tree, as the OperandType users are
mostly smart disassemblers and such; more information is helpful there.
However, on the flip side, that + the fact that this is just hinting at
the meaning of operands makes this not really test-worthy or testable.
Differential Revision: http://reviews.llvm.org/D8620
llvm-svn: 234350
This reverts commit r234295 (and r234294 and r234292 before it). I
removed the implicit conversion to `MDTuple*` r234326, so there's no
longer an ambiguity in `operator[]()`.
I think MSVC should accept the original code now...
llvm-svn: 234335
Instead of lowering SELECT to SELECT_CC which is further lowered later
immediately call the SELECT_CC lowering code. This is preferable
because:
- Avoids an unnecessary roundtrip through the legalization queues with
an intermediate node.
- More importantly: Lowered operations get visited last leading to SELECT_CC
getting visited with legalized operands and unlegalized ones for preexisting
SELECT_CC nodes. This does not hurt the current code (hence no testcase) but
is required for another patch I am working on.
Differential Revision: http://reviews.llvm.org/D8187
llvm-svn: 234334
This reverts commit r234329, which insufficiently appeased older
`clang`s (apparently that wasn't the only call site). r234331 was a
more complete fix.
llvm-svn: 234333
A bot is failing [1] after r234326, apparently because this code doesn't
do what I think it should:
template <class U>
explicit MDTupleTypedArrayWrapper(
const U &Tuple,
typename std::enable_if<
std::is_constructible<const MDTuple *, U>::value>::type * = nullptr)
: N(Tuple) {}
Just be explicit for now.
[1]: http://lab.llvm.org:8080/green/job/clang-stage1-cmake-RA-incremental_build/8201/
llvm-svn: 234329
There were four almost identical implementations of calculating/updating
the register pressure for a certain MachineInstr. Cleanup to have a
single implementation (well, controlled with two bool flags until this
is cleaned up more).
No functional changes intended.
Tested by verify that there are no binary changes in the entire llvm
test-suite. A new test was added separately in r234309 as it revealed a
pre-existing error in the register pressure calculation.
llvm-svn: 234325
Summary:
This is not possible when using the IAS for MIPS, but it is possible when using the IAS for other architectures and when using GAS for MIPS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8578
llvm-svn: 234316
Lang Hames