Behaviour was recently added to this switch to strip debug sections too.
See r369761.
This change also makes the description for the --strip-unneeded switch
consistent between the two docs.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D67546
llvm-svn: 371855
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
The tool will be very useful for tracking improvements regarding the
"debugging optimized code" support with LLVM ecosystem.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 371520
Add a mode in which profile read errors are not immediately treated as
fatal. In this mode, merging makes forward progress and reports failure
only if no inputs can be read.
Differential Revision: https://reviews.llvm.org/D66985
llvm-svn: 370827
Summary:
Commit r366897 introduced the possibility to set a variable from an
expression, such as [[#VAR2:VAR1+3]]. While introducing this feature, it
introduced extra logic to allow using such a variable on the same line
later on. Unfortunately that extra logic is flawed as it relies on a
mapping from variable to expression defining it when the mapping is from
variable definition to expression. This flaw causes among other issues
PR42896.
This commit avoids the problem by forbidding all use of a variable
defined on the same line, and removes the now useless logic. Redesign
will be done in a later commit because it will require some amount of
refactoring first for the solution to be clean. One example is the need
for some sort of transaction mechanism to set a variable temporarily and
from an expression and rollback if the CHECK pattern does not match so
that diagnostics show the right variable values.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66141
llvm-svn: 370663
It was causing some errors like:
Encoding error:
'ascii' codec can't decode byte 0xe2 in position 341: ordinal not in range(128)
The full traceback has been saved in /tmp/sphinx-err-y2fq4dtb.log, if you want to report the issue to the developers.
llvm-svn: 369644
Summary:
Linking between markdown and rst files is currently not supported very well, e.g. the current llvm-addr2line docs [1] link to "llvm-symbolizer" instead of "llvm-symbolizer.html". This is weirdly broken in different ways depending on which versions of sphinx and recommonmark are being used, so workaround the bug by using rst everywhere.
[1] http://llvm.org/docs/CommandGuide/llvm-addr2line.html
Reviewers: jhenderson
Reviewed By: jhenderson
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66305
llvm-svn: 369553
Flag -show-encoding enables the printing of instruction encodings as part of the
the instruction info view.
Example (with flags -mtriple=x86_64-- -mcpu=btver2):
Instruction Info:
[1]: #uOps
[2]: Latency
[3]: RThroughput
[4]: MayLoad
[5]: MayStore
[6]: HasSideEffects (U)
[7]: Encoding Size
[1] [2] [3] [4] [5] [6] [7] Encodings: Instructions:
1 2 1.00 4 c5 f0 59 d0 vmulps %xmm0, %xmm1, %xmm2
1 4 1.00 4 c5 eb 7c da vhaddps %xmm2, %xmm2, %xmm3
1 4 1.00 4 c5 e3 7c e3 vhaddps %xmm3, %xmm3, %xmm4
In this example, column Encoding Size is the size in bytes of the instruction
encoding. Column Encodings reports the actual instruction encodings as byte
sequences in hex (objdump style).
The computation of encodings is done by a utility class named mca::CodeEmitter.
In future, I plan to expose the CodeEmitter to the instruction builder, so that
information about instruction encoding sizes can be used by the simulator. That
would be a first step towards simulating the throughput from the decoders in the
hardware frontend.
Differential Revision: https://reviews.llvm.org/D65948
llvm-svn: 368432
Summary:
The information for -info -thin -create -replace and -segalign flags are added to llvm-lipo.rst
Test Plan:
Reviewers: smeenai, alexshap, compnerd, mtrent
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65676
llvm-svn: 368235
This patch adds a new llvm-mca flag named -print-imm-hex.
By default, the instruction printer prints immediate operands as decimals. Flag
-print-imm-hex enables the instruction printer to print those operands in hex.
This patch also adds support for MASM binary and hex literal numbers (example
0FFh, 101b).
Added tests to verify the behavior of the new flag. Tests also verify that masm
numeric literal operands are now recognized.
Differential Revision: https://reviews.llvm.org/D65588
llvm-svn: 367671
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60387
llvm-svn: 366001
Summary: This moves away from defaulting to a.out and uses stdin only if stdin has a file redirected to it. This has been discussed on the llvm-dev mailing list [[ https://lists.llvm.org/pipermail/llvm-dev/2019-July/133642.html | here ]].
Reviewers: jhenderson, rupprecht, MaskRay, chrisjackson
Reviewed By: jhenderson, MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64290
llvm-svn: 365889
Some of the wording in the doc (taken largely from the help text), was a
little imprecise in some cases, so this patch makes it a little more
precise.
Reviewed by: JDevlieghere, probinson
Differential Revision: https://reviews.llvm.org/D64332
llvm-svn: 365451
Similar to `FILECHECK_OPTS` for FileCheck, `LIT_OPTS` makes it easy to
adjust lit behavior when running the test suite via ninja. For
example:
```
$ LIT_OPTS='--time-tests -vv --filter=threadprivate' \
ninja check-clang-openmp
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D64135
llvm-svn: 365313
We briefly referred to being able to specify --target=binary without
explaining what binary input/output meant. This change adds a section on
this.
Reviewed by: MaskRay, abrachet
Differential Revision: https://reviews.llvm.org/D64245
llvm-svn: 365312
--section-data, --section-relocations and --section-symbols have no
effect for GNU style ouput. This patch changes the docs to point this
out, as it has caught me out on a couple of occasions.
See also https://bugs.llvm.org/show_bug.cgi?id=42522.
llvm-svn: 365221
Summary: Changes "see also" links to use :manpage: instead of plain text or the form `name|name` which was being treated literally, not as a link.
Reviewers: jhenderson, rupprecht
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63970
llvm-svn: 365159
The --show-children option description describes what it does, and
references the =<offset> parameter of section dump switches. I don't
think it needs to be explained again in the documentation of the
section dump switches too.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D64132
llvm-svn: 365115
Summary: Removed excess new lines from documentations. As far as I can tell, it seems as though restructured text is agnostic to new lines, the use of new lines was inconsistent and had no effect on how the files were being displayed.
Reviewers: jhenderson, rupprecht, JDevlieghere
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63971
llvm-svn: 365105
This patch addresses https://bugs.llvm.org/show_bug.cgi?id=42183 by replacing
the stub markdown doc for llvm-objcopy with a full one describing the current
options available in llvm-objcopy.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D63820
llvm-svn: 365042
Previously, the llvm-readelf documentation was essentially just a list
of differences to llvm-readobj. Since llvm-readelf is the more likely
goto tool for many people migrating to the LLVM toolchain, it seems like
it would be helpful to document all the switches in the llvm-readelf
document too. This change expands the options listed accordingly.
Additionally, they are unlikely to care what the differences are to
llvm-readobj, since they won't be familiar with the latter as there is
no GNU equivalent, so this change moves the "differences" section to
llvm-readobj's documentation.
Reviewed by: peter.smith
Differential Revision: https://reviews.llvm.org/D63826
llvm-svn: 364800
Update the doc after llvm-svn: 364121 is landed.
With two more trivial fixes that are not related to
--disassemble-functions but still about llvm-objdump.
Reviewers: jhenderson, grimar, MaskRay, rupprecht, peter.smith
Reviewed by: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D63787
llvm-svn: 364573
The "See Also" section for llvm-nm didn't actually contain any links,
and the tools referred to didn't make much sense (referring to non-LLVM
tools, when we have equivalents, or tools that aren't really to do with
symbol dumping). llvm-objdump's didn't refer to llvm-readelf.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D63875
llvm-svn: 364552
Sphinx allows for definitions of command-line options using
`.. option <name>` and references to those options via `:option:<name>`.
However, it looks like there is no scoping of these options by default,
meaning that links can end up pointing to incorrect documents. See for
example the llvm-mca document, which contains references to -o that,
prior to this patch, pointed to a different document. What's worse is
that these links appear to be non-deterministic in which one is picked
(on my machine, some references end up pointing to opt, whereas on the
live docs, they point to llvm-dwarfdump, for example).
The fix is to add the .. program <name> tag. This essentially namespaces
the options (definitions and references) to the named program, ensuring
that the links are kept correct.
Reviwed by: andreadb
Differential Revision: https://reviews.llvm.org/D63873
llvm-svn: 364538
As detailed in https://bugs.llvm.org/show_bug.cgi?id=42253, there were a
number of issues in the llvm-symbolizer documentation. This patch fixes
them by:
1. Adding [addresses...] to the synopsis, and matching the formatting
of other tools.
2. Rewriting the description to fix grammar issues and mention other
usage options.
3. Rewriting the examples to be easier to read.
4. Re-ordering the options into alphabetical order.
5. Improving the text of some of the option descriptions, and adding
some examples to individual options.
6. Splitting the Mach-O options into a separate section of the
document.
7. Standardizing on double dashes for long options throughout the file.
8. Adding a reference to the llvm-addr2line document.
Reviewed by: mtrent, ikudrin
Differential Revision: https://reviews.llvm.org/D63651
llvm-svn: 364410
There were a number of issues with the llvm-readobj documentation. The
following points were raised in https://bugs.llvm.org/show_bug.cgi?id=42255,
and have been fixed in this patch:
1. The description section claimed "The tool and its output is
primarily designed for use in FileCheck-based tests" which is not
really the case any more.
2. The documentation used single-dash long options for option names,
but references in the help text to other options exclusively used
double-dashes. Fixed by standardising on double-dashes for all
long-form options.
3. The majority of options available and in the help text were not
present in the documentation. This patch adds them.
4. Several aliases, both long and short, were missing, e.g. --relocs.
Additionally, this patch improves the documentation by:
1. Splitting the options into categories based on the file format they
are specific to.
2. Updating the Exit Status section to correctly mention that errors
lead to a non-zero exit code.
3. Adding a See Also section referencing other similar LLVM tools.
4. Improving/correcting some of the descriptions of options that did
not quite match up with what llvm-readobj does.
Reviewed by: peter.smith, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D63719
llvm-svn: 364306
There was a stub for llvm-cxxfilt, but it didn't describe the options.
Additionally, it was in markdown, which was causing issues, so as
discussed in https://reviews.llvm.org/D63211, this change replaces the
existing stub with an RST file.
Reviewed by: MaskRay, mattd
Differential Revision: https://reviews.llvm.org/D63722
llvm-svn: 364287
Nico Weber