Add support for folding G_GEPs into loads of the form
```
ldr reg, [base, off]
```
when possible. This can save an add before the load. Currently, this is only
supported for loads of 64 bits into 64 bit registers.
Add a new addressing mode function, `selectAddrModeRegisterOffset` which
performs this folding when it is profitable.
Also add a test for addressing modes for G_LOAD.
Differential Revision: https://reviews.llvm.org/D64944
llvm-svn: 366503
This is a small extension of !associated, mostly useful for the implementation
convenience of instrumentation passes that RAUW globals with aliases, such
as LowerTypeTests.
Differential Revision: https://reviews.llvm.org/D64951
llvm-svn: 366502
Summary:
Other platforms don't have the capability to perform llvm_codesign
step. If LLVM_CODESIGNING_IDENTITY is set then this chunk of code would
attempt to codesign if the target was Apple. But when cross compiling
to Darwin from Linux, for example, this step would fail. So test if the
host is Apple as well.
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64942
llvm-svn: 366498
Summary:
Some polish for r365099 which adds a static initializer to
MachOObjectFile. Remove it by moving it to file scope.
Reviewers: smeenai, alexshap, compnerd, mtrent, anushabasana
Reviewed By: smeenai
Subscribers: hiraditya, jkorous, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64873
llvm-svn: 366496
This causes sections with relative pointers to be marked as read only,
which means that they won't end up sharing pages with writable data.
Differential Revision: https://reviews.llvm.org/D64948
llvm-svn: 366494
The new DriverKit user-land kernel drivers in macOS 10.15 / Catalina
do not have a main() function or an LC_MAIN load command. lldb uses
the address of main() as the return address for inferior function
calls; it puts a breakpoint on main, runs the inferior function call,
and when the main() breakpoint is hit, lldb knows unambiguously that
the inferior function call ran to completion - no other function calls
main.
This change hoists the logic for finding the "entry address" from
ThreadPlanCallFunction to Target. It changes the logic to first
try to get the entry address from the main executable module,
but if that module does not have one, it will iterate through all
modules looking for an entry address.
The patch also adds code to ObjectFileMachO to use dyld's
_dyld_start function as an entry address.
<rdar://problem/52343958>
Differential Revision: https://reviews.llvm.org/D64897
llvm-svn: 366493
Instead of having to write FileSpecList::Append(FileSpec(args)) you can
now call FileSpecList::EmplaceBack(args), similar to
std::vector<>::emplace_back.
llvm-svn: 366489
While 'd_type' is a non-standard extension to `struct dirent`, only
glibc signals its presence with a macro '_DIRENT_HAVE_D_TYPE'.
However, any platform with 'd_type' also includes a way to convert to
mode_t values using the macro 'DTTOIF', so we can check for that alone
and still be confident that the 'd_type' member exists.
(If this turns out to be wrong, I'll go back and set up an actual
CMake check.)
I couldn't think of how to write a test for this, because I couldn't
think of how to test that a 'stat' call doesn't happen without
controlling the filesystem or intercepting 'stat', and there's no good
cross-platform way to do that that I know of.
Follow-up (almost a year later) to r342089.
rdar://problem/50592673
https://reviews.llvm.org/D64940
llvm-svn: 366486
If the threadprivate variable is used in the copyin clause on inner
parallel directive with TLS support, we capture this variable in all
outer OpenMP scopes. It leads to the fact that in all scopes we're
working with the original variable, not the threadprivate copies.
llvm-svn: 366483
The RISC-V hard float calling convention requires the frontend to:
* Detect cases where, once "flattened", a struct can be passed using
int+fp or fp+fp registers under the hard float ABI and coerce to the
appropriate type(s)
* Track usage of GPRs and FPRs in order to gate the above, and to
determine when signext/zeroext attributes must be added to integer
scalars
This patch attempts to do this in compliance with the documented ABI,
and uses ABIArgInfo::CoerceAndExpand in order to do this. @rjmccall, as
author of that code I've tagged you as reviewer for initial feedback on
my usage.
Note that a previous version of the ABI indicated that when passing an
int+fp struct using a GPR+FPR, the int would need to be sign or
zero-extended appropriately. GCC never did this and the ABI was changed,
which makes life easier as ABIArgInfo::CoerceAndExpand can't currently
handle sign/zero-extension attributes.
Re-landed after backing out 366450 due to missed hunks.
Differential Revision: https://reviews.llvm.org/D60456
llvm-svn: 366480
r366471 added "-features autodoc" without a trailing comment, leading to `Unrecognized option -features autodoc-threads` due to implicit string concatenation. Add a comma to fix that.
Also separate into "-features" and "autodoc", otherwise it gets parsed as a single "-features autodoc" flag which is also not recognized (it must be two separate CLI args).
llvm-svn: 366478
The IRBuilder doesn't know that FPTrunc and FPExt have constrained
equivalents. Add the support by building on the strict FP mode now
present in the IRBuilder.
Reviewed by: John McCall
Approved by: John McCall
Differential Revision: https://reviews.llvm.org/D64934
llvm-svn: 366477
Summary:
We currently don't support offsetof in the expression evaluator as it is implemented as a macro
(which then calls __builtin_offsetof) in stddef.h. The best solution would be to include that
header (or even better, import Clang's builtin module), but header-parsing and
(cross-platform) importing modules is not ready yet.
Until we get this working with modules I would say we add the macro to our existing macro list
as we already do with other macros from stddef.h/stdint.h. We should be able to drop all of them
once we can import the relevant modules by default.
rdar://26040641
Reviewers: shafik, davide
Reviewed By: davide
Subscribers: clayborg, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64917
llvm-svn: 366476
Summary:
Add `__builtin_wasm_tls_base` so that LeakSanitizer can find the thread-local
block and scan through it for memory leaks.
Reviewers: tlively, aheejin, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64900
llvm-svn: 366475
variables.
Loop control variables are private in loop-based constructs and we shall
take this into account when generate the code for inner constructs.
Currently, those variables are reported as shared in many cases. Moved
the analysis of the data-sharing attributes of the loop control variable
to an early semantic stage to correctly handle their attributes.
llvm-svn: 366474
Summary:
Currently, Transformer rejects any changes to source locations inside macro
expansions. This change relaxes that constraint to allow rewrites when the
entirety of the expansion is replaced, since that can be mapped to replacing the
entirety of the expansion range in the file source. This change makes
Transformer consistent with the handling of edit ranges in `clang::edit::Commit`
(which is used, for example, for applying `FixItHint`s from diagnostics).
Reviewers: ilya-biryukov
Subscribers: gribozavr, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64518
llvm-svn: 366473
Summary:
- As the pointer stripping now tracks through `addrspacecast`, prepare
to handle the bit-width difference from the result pointer.
Reviewers: jdoerfert
Subscribers: jvesely, nhaehnle, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64928
llvm-svn: 366470
Summary:
Adds the function `getRangeForEdit` to validate that a given source range is
editable and, if needed, translate it into a range in the source file (for
example, if it's sourced in macro expansions).
Reviewers: ilya-biryukov
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64924
llvm-svn: 366469
Summary:
Changes persistance logic to store shards at the directory of closest
CDB. Previously we were storing all shards to directory of the CDB that
triggered indexing, it had its downsides.
For example, if you had two TUs coming from a different CDB but depending on the
same header foo.h, we will store the foo.h only for the first CDB, and it would
be missing for the second and we would never persist it since it was actually
present in the memory and persisted before.
This patch still stores only a single copy of a shard, but makes the directory a
function of the file name. So that the shard place will be unique even with
multiple CDBs accessing the file. This directory is determined as the first
directory containing a CDB in the file's parent directories, if no such
directory exists we make use of the home directory.
Reviewers: sammccall
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64745
llvm-svn: 366467
Avoid splitting the test into multiple files and use zero for the value of
the symbol with addends at relocations so that it's clear what value is
being used at relocations.
Differential Revision: https://reviews.llvm.org/D64684
llvm-svn: 366463
There doesn't seem to be a practical reason for these instructions to have
different restrictions on the types of relocations that they may be used
with, notwithstanding the language in the ELF AArch64 spec that implies that
specific relocations are meant to be used with specific instructions.
For example, we currently forbid the first instruction in the following
sequence, despite it currently being used by clang to generate a global
reference under -mcmodel=large:
movz x0, #:abs_g0_nc:foo
movk x0, #:abs_g1_nc:foo
movk x0, #:abs_g2_nc:foo
movk x0, #:abs_g3:foo
Therefore, allow MOVK/MOVN/MOVZ to accept the union of the set of relocations
that they currently accept individually.
Differential Revision: https://reviews.llvm.org/D64466
llvm-svn: 366461
It's possible to create IR that uses !associated to refer to a global that
appears later in the module, which can result in these types of forward
references being generated. Unfortunately our assembler does not currently
accept the resulting .s so I needed to use yaml2obj to test this.
Differential Revision: https://reviews.llvm.org/D64880
llvm-svn: 366460
Jessica Paquette