Summary:
The entire algorithm operates per basic-block, so for cache locality
it should be better to re-optimize a basic-block immediately rather than
in a separate loop.
I don't have performance measurements.
Change-Id: I85106570bd623c4ff277faaa50ee43258e1ddcc5
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40344
llvm-svn: 319156
Summary:
The PeepholeOptimizer pass calls this function solely based on checking
DefMI->isMoveImmediate(), which only checks the MoveImm bit of the
instruction description. So it's up to FoldImmediate itself to properly
check that DefMI *actually* moves from an immediate.
I don't have a separate test case for this, but the next patch introduces
a test case which happens to crash without this change.
This error is caught by the assertion in MachineOperand::getImm().
Change-Id: I88e7cdbcf54d75e1a296822e6fe5f9a5f095bbf8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40342
llvm-svn: 319155
This adds code to protect WebAssembly's `trunc_s` family of opcodes
from values outside their domain. Even though such conversions have
full undefined behavior in C/C++, LLVM IR's `fptosi` and `fptoui` do
not, and only return undef.
This also implements the proposed non-trapping float-to-int conversion
feature and uses that instead when available.
llvm-svn: 319128
These lines all exist identically either under SSE2, AVX2 or AVX512. Given that VLX implies all of those, these aren't providing anything new.
llvm-svn: 319124
Which VTs are considered simple is determined by the superset of the legal types of all targets in LLVM. If we're looking at VTs that are going to be split down to 512-bits we should allow any VT not just simple ones since the simple list changes over time as new targets are added.
llvm-svn: 319110
We don't do this for narrow vectors under AVX or SSE features. We also don't set them to Expand like we do for many vectors op. Nor does TargetLoweringBase.cpp. This leads me to believe these default to Legal.
llvm-svn: 319103
This patch adds a peep hole optimization to remove any redundant toc save
instructions added as part of the call sequence for indirect calls. It removes
any toc saves within a function that are dominated by another toc save.
Differential Revision: https://reviews.llvm.org/D39736
llvm-svn: 319087
I don't have a good test case for this at the moment. I was playing around with a change in legalizing and triggered this code to produce a PSHUFD with sse1 only.
llvm-svn: 319066
Similar for vXi16/vXi8 with BWI.
Any vector larger than 512 bits will be split to 512 bits during legalization. But without this we will fold sexts with them before that making it difficult to recover leading to scalarization.
llvm-svn: 319059
This patch extends on to rL307174 to not use the power9 vector extract with
variable index instructions when extracting word element 1. For such cases,
the existing selection of MFVSRWZ provides a better sequence.
Differential Revision: https://reviews.llvm.org/D38287
llvm-svn: 319049
Summary:
Now that store-merge is only generates type-safe stores, do a second
pass just before instruction selection to allow lowered intrinsics to
be merged as well.
Reviewers: jyknight, hfinkel, RKSimon, efriedma, rnk, jmolloy
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33675
llvm-svn: 319036
Make the print format consistent with other assembler instructions.
Adding a tab character instead of space in asmstring of Ext and Ins
instructions.
Removing space around the tab character for JALRC and replacing space with
tab in JRC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38144
llvm-svn: 319030
AMDGPU backend errors with "unsupported call to function" upon
encountering a call to llvm.log{,10}.{f16,f32} intrinsics. This patch
adds custom lowering to avoid that error on both R600 and SI.
Reviewers: arsenm, jvesely
Subscribers: tstellar
Differential Revision: https://reviews.llvm.org/D29942
llvm-svn: 319025
As mentioned on PR17367, many instructions are missing scheduling tags preventing us from setting 'CompleteModel = 1' for better instruction analysis. This patch deals with FMA/FMA4 which is one of the bigger offenders (along with AVX512 in general).
Annoyingly all scheduler models need to define WriteFMA (now that its actually used), even for older targets without FMA/FMA4 support, but that is an existing problem shared by other schedule classes.
Differential Revision: https://reviews.llvm.org/D40351
llvm-svn: 319016
The commit https://reviews.llvm.org/rL318143 computes incorrectly to offset to
restore LR from.
The number of tPOP operands is 2 (condition) + 2 (implicit def and use of SP) +
count of the popped registers. We need to load LR from just past the last
register, hence the correct offset should be either getNumOperands() - 4 and
getNumExplicitOperands() - 2 (multiplied by 4).
Differential revision: https://reviews.llvm.org/D40305
llvm-svn: 319014
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
Summary:
These instructions zero the non-scalar part of the lower 128-bits which makes them different than the FMA3 instructions which pass through the non-scalar part of the lower 128-bits.
I've only added fmadd because we should be able to derive all other variants using operand negation in the intrinsic header like we do for AVX512.
I think there are still some missed negate folding opportunities with the FMA4 instructions in light of this behavior difference that I hadn't noticed before.
I've split the tests so that we can use different intrinsics for scalar testing between the two. I just copied the tests split the RUN lines and changed out the scalar intrinsics.
fma4-fneg-combine.ll is a new test to make sure we negate the fma4 intrinsics correctly though there are a couple TODOs in it.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39851
llvm-svn: 318984
Summary:
This adds a new fast gather feature bit to cover all CPUs that support fast gather that we can use independent of whether the AVX512 feature is enabled. I'm only using this new bit to qualify AVX2 codegen. AVX512 is still implicitly assuming fast gather to keep tests working and to match the scatter behavior.
Test command lines have been added for these two cases.
Reviewers: magabari, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40282
llvm-svn: 318983
v4i32 isn't a legal type with sse1 only and would end up getting scalarized otherwise.
This isn't completely ideal as it doesn't handle cases like v8i32 that would get split to v4i32. But it at least helps with code written using the clang intrinsic header.
llvm-svn: 318967
This optimization can occur after type legalization and emit a vselect with v4i32 type. But that type is not legal with sse1. This ultimately gets scalarized by the second type legalization that runs after vector op legalization, but that's really intended to handle the scalar types that might be introduced by legalizing vector ops.
For now just stop this from happening by disabling the optimization with sse1.
llvm-svn: 318965
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
The NewCC variable is calculated outside of the loop that processes jcc/setcc/cmovcc instructions. If we invert it during the loop it can cause an incorrect value to be used by a later iteration. Instead only read it during the loop and use a new variable to store the possibly inverted value.
Fixes PR35399.
llvm-svn: 318934
Simon Pilgrim