This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
Summary:
This follows from the discussion at D70095.
D70095 moves hasOptSize calls into SelectionDAG::shouldOptForSize to allow
querying size optimization conditions together with profile guided size
optimization.
Since it appears that size optimizations for WebAssembly SelectionDAG haven't
been implemented yet and thus ForCodeSize is unused, and it would not make a lot
of sense to call shouldOptForSize here as the necessary profile data like
PSI/BFI aren't available at this point, it seems good and less confusing to
remove this for now and use shouldOptForSize when they are implemented in the
future.
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70567
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
This instruction is not merged to the spec proposal, but we need it to
be implemented in the toolchain to experiment with it. It is available
only on an opt-in basis through a clang builtin.
Defined in https://github.com/WebAssembly/simd/pull/127.
Depends on D69696.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69697
This reverts commit e5cae5692b, which
reverted 11850a6305. The original revert
was done because of breakage that was actually in a separate commit,
2ab1b8c1ec, which was also reverted and
has since been fixed and relanded.
Summary:
Introduces a clang builtins and LLVM intrinsics representing integer
min/max instructions. These instructions have not been merged to the
SIMD spec proposal yet, so they are currently opt-in only via builtins
and not produced by general pattern matching. If these instructions
are accepted into the spec proposal the builtins and intrinsics will
be replaced with normal pattern matching.
Defined in https://github.com/WebAssembly/simd/pull/27.
Reviewers: aheejin
Reviewed By: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69696
This reverts commit 2ab1b8c1ec, it is
causing build failures on numerous bots, including
sanitizer-x86_64-linux-bootstrap-ubsan. My previous revert was for the
wrong commit.
Summary:
Fixes an ISel failure when a splatted load is used more than once. The
failure was due to the hacks we were doing in ISel lowering to
preserve the original load as the operand of a LOAD_SPLAT node. The
fix is to properly lower the splatted use of the load to a separate
LOAD_SPLAT node.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69640
Summary:
The SIMD spec does not include i64x2 comparisons, so they need to be
expanded. Using setOperationAction to expand them also causes f64x2
comparisons to be expanded, so setCondCodeAction needs to be used
instead. But since there are no legal condition codes, the legalizer
does not know how to expand the comparisons. We therefore manually
unroll the operation, taking care to fill each lane with -1 or 0
rather than 1 or 0 for consistency with the other vector comparisons.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69604
MipsMCAsmInfo was using '$' prefix for Mips32 and '.L' for Mips64
regardless of -target-abi option. By passing MCTargetOptions to MCAsmInfo
we can find out Mips ABI and pick appropriate prefix.
Tags: #llvm, #clang, #lldb
Differential Revision: https://reviews.llvm.org/D66795
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68889
llvm-svn: 374933
Summary:
The WebAssembly backend lowers fptoint instructions to a code sequence
that checks for overflow to avoid traps because fptoint is supposed to
be speculatable. These new builtins and intrinsics give users a way to
depend on the trapping semantics of the underlying instructions and
avoid the extra code generated normally.
Patch by coffee and tlively.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68902
llvm-svn: 374856
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
Summary:
This is necessary and sufficient to get simple cases of multiple
return working with multivalue enabled. More complex cases will
require block and loop signatures to be generalized to potentially be
type indices as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68684
llvm-svn: 374235
Summary:
This clang builtin and corresponding LLVM intrinsic are necessary to
expose the exact semantics of the underlying WebAssembly instruction
to users. LLVM produces a poison value if the dynamic swizzle indices
are greater than the vector size, but the WebAssembly instruction sets
the corresponding output lane to zero. Users who depend on this
behavior can safely use this builtin.
Depends on D68527.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68531
llvm-svn: 374189
Summary:
Adds the new v8x16.swizzle SIMD instruction as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#swizzling-using-variable-indices.
In addition to adding swizzles as a candidate lowering in
LowerBUILD_VECTOR, also rewrites and simplifies the lowering to
minimize the number of replace_lanes necessary rather than trying to
minimize code size. This leads to more uses of v128.const instead of
splats, which is expected to increase performance.
The new code will be easier to tune once V8 implements all the vector
construction operations, and it will also be easier to add new
candidate instructions in the future if necessary.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68527
llvm-svn: 374188
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
Summary:
When searching for local expression tree created by stackified
registers, for 'block' placement, we start the search from the previous
instruction of a BB's terminator. But in 'try''s case, we should start
from the previous instruction of a call that can throw, or a EH_LABEL
that precedes the call, because the return values of the call's previous
instructions can be stackified and consumed by the throwing call.
For example,
```
i32.call @foo
call @bar ; may throw
br $label0
```
In this case, if we start the search from the previous instruction of
the terminator (`br` here), we end up stopping at `call @bar` and place
a 'try' between `i32.call @foo` and `call @bar`, because `call @bar`
does not have a return value so it is not a local expression tree of
`br`.
But in this case, unlike when placing 'block's, we should start the
search from `call @bar`, because the return value of `i32.call @foo` is
stackified and used by `call @bar`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68619
llvm-svn: 374073
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Summary:
There was a bug when computing the number of unwind destination
mismatches in CFGStackify. When there are many mismatched calls that
share the same (original) destination BB, they have to be counted
separately.
This also fixes a typo and runs `fixUnwindMismatches` only when the wasm
exception handling is enabled. This is to prevent unnecessary
computations and does not change behavior.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68552
llvm-svn: 373975
Summary:
Previously, `WebAssembly::mayThrow()` assumed all inputs are global
addresses. But when intrinsics, such as `memcpy`, `memmove`, or `memset`
are lowered to external symbols in instruction selection and later
emitted as library calls. And these functions don't throw.
This patch adds handling to those memory intrinsics to `mayThrow`
function. But while most of libcalls don't throw, we can't guarantee all
of them don't throw, so currently we conservatively return true for all
other external symbols.
I think a better way to solve this problem is to embed 'nounwind' info
in `TargetLowering::CallLoweringInfo`, so that we can access the info
from the backend. This will also enable transferring 'nounwind'
properties of LLVM IR instructions. Currently we don't transfer that
info and we can only access properties of callee functions, if the
callees are within the module. Other targets don't need this info in the
backend because they do all the processing before isel, but it will help
us because that info will reduce code size increase in fixing unwind
destination mismatches in CFGStackify.
But for now we return false for these memory intrinsics and true for all
other libcalls conservatively.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68553
llvm-svn: 373967
Summary:
64-bit WebAssembly (wasm64) is not specified and not supported in the
WebAssembly backend. We do have support for it in clang, however, and
we would like to keep that support because we expect wasm64 to be
specified and supported in the future. For now add an error when
trying to use wasm64 from the backend to minimize user confusion from
unexplained crashes.
Reviewers: aheejin, dschuff, sunfish
Subscribers: sbc100, jgravelle-google, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68254
llvm-svn: 373493
Summary:
In CFGSort, we try to make EH pads have higher priorities as soon as
they are ready to be sorted, to prevent creation of unwind destination
mismatches in CFGStackify. We did that by making priority queues'
comparison function prefer EH pads, but it was possible for an EH pad
to be popped from `Preferred` queue and then not sorted immediately and
enter `Ready` queue instead in a certain condition. This patch makes
sure that special condition does not consider EH pads as its candidates.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68229
llvm-svn: 373302
Summary:
Fixing unwind mismatches for exception handling can result in splicing
existing BBs and moving some of instructions to new BBs. In this case
some of stackified def registers in the original BB can be used in the
split BB. For example, we have this BB and suppose %r0 is a stackified
register.
```
bb.1:
%r0 = call @foo
... use %r0 ...
```
After fixing unwind mismatches in CFGStackify, `bb.1` can be split and
some instructions can be moved to a newly created BB:
```
bb.1:
%r0 = call @foo
bb.split (new):
... use %r0 ...
```
In this case we should make %r0 un-stackified, because its use is now in
another BB.
When spliting a BB, this CL unstackifies all def registers that have
uses in the new split BB.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68218
llvm-svn: 373301
Summary:
Instead of having different v128.load and v128.store instructions for
each MVT, just have one of each that is reused in all the
patterns. Also removes the HasSIMD128 predicate where accompanied by
HasUnimplementedSIMD128, since the latter implies the former.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67930
llvm-svn: 372792
Summary:
Adds the new load_splat instructions as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#load-and-splat.
DAGISel does not allow matching multiple copies of the same load in a
single pattern, so we use a new node in WebAssemblyISD to wrap loads
that should be splatted.
Depends on D67783.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67784
llvm-svn: 372655
Summary:
Removes duplicated SIMD loads and store instructions and removes
patterns involving GlobalAddresses that were not used in any tests.
Reviewers: aheejin, sunfish
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67783
llvm-svn: 372648
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
Summary:
Large slowdowns were observed in Rust due to many small, constant
sized copies in conjunction with poorly-optimized memory.copy
implementations. Since memory.copy cannot be expected to be inlined
efficiently by engines at this time, stop using it for the smallest
copies. We continue to lower all memcpy intrinsics to memory.copy,
though.
Reviewers: aheejin, alexcrichton
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, JDevlieghere, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67639
llvm-svn: 372275
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
This removes all string constants for function names and compares
functions by string directly when needed. Many of these constants are
used only once or twice so the benefit of defining them separately is
not very clear, and this actually fixes a bug.
When we already have a `malloc` declaration which is an alias to
something else within the module,
```
@malloc = weak hidden alias i8* (i32), i8* (i32)* @dlmalloc
```
(this happens compiling with emscripten with `-s WASM_OBJECT_FILES=0`
because all bc files are merged before being fed into `wasm-ld` which
runs the backend optimizations as LTO)
`Module::getFunction("malloc")` in `canLongjmp` returns `nullptr`
because `Module::getFunction` dyncasts pointer into `Function`, but the
alias is a `GlobalValue` but not a `Function`. This makes `canLongjmp`
return false for `malloc` in this case, and we end up adding a lot of
longjmp handling code around malloc. This is not only a code size
increase but actually a bug because `malloc` is used in the entry block
when preparing for setjmp tables for emscripten sjlj handling, and this
makes initial setjmp preparation, which has to happen in the entry
block, move to another split block, and this interferes with SSA update
later.
This also adds two more functions, `getTempRet0` and `setTempRet0`, in
the list of not longjmp-able functions.
Fixes https://github.com/emscripten-core/emscripten/issues/8935.
Reviewers: sbc100
Subscribers: mehdi_amini, jgravelle-google, hiraditya, sunfish, dexonsmith, dschuff, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67129
llvm-svn: 370828
David Green