Summary:
This commit fixes following problems after rL341782:
- Broken SymbolFilePDBTests
- Warning on comparison of integers of different signs
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D51162
llvm-svn: 341942
The warning is
comparison of integers of different signs: 'const int' and 'const unsigned long'
and triggered by
EXPECT_EQ (num_of_instructions, inst_list.GetSize());
as num_of_instructions is an int in this comparison (and the RHS is size_t).
llvm-svn: 341931
code. This will enable disassembly of the optional subset of
neon that some Cortex cores support. Add a unit test to check
that a few of these instructions disassemble as expected.
<rdar://problem/26674303>
llvm-svn: 341623
TestCompletion was failing quite frequently on our Linux bots. Some tracing
revealed that when we are iterating BaseDir we are not getting all the entries.
More specifically, we are sometimes missing the entry corresponding to the
TestCompletion directory that the first test in DirCompletionAbsolute is
looking for. BaseDir is the directory where lit is creating all the temporary
files. The semantics of opendir/readdir are unclear when it comes to iterating
over a directory that changes contents, but it seems like on Linux you might
fail to list an entry even if it was there before opendir and is still present
throughout the iteration. Changing the test to only look inside of the test-
specific directory seems to fix the instability.
This commit also removes some assertions that were added to try to track down
this issue.
llvm-svn: 341425
If you tried to complete somwthing like ~/., lldb would come up with a lot
of non-existent filenames by concatenating every exisitng file in the directory
with an initial '.'.
This was due to a workaround for an llvm::fs::path::filename behavior that
was not applied selectively enough.
llvm-svn: 341268
Summary:
This class was initially in Host because its implementation used to be
very OS-specific. However, with C++11, it has become a very simple
std::condition_variable wrapper, with no host-specific code.
It is also a general purpose utility class, so it makes sense for it to
live in a place where it can be used by everyone.
This has no effect on the layering right now, but it enables me to later
move the Listener+Broadcaster+Event combo to a lower layer, which is
important, as these are used in a lot of places (notably for launching a
process in Host code).
Reviewers: jingham, zturner, teemperor
Reviewed By: zturner
Subscribers: xiaobai, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50384
llvm-svn: 341089
Summary:
The syntax highlighting feature so far is mutually exclusive with the lldb feature
that marks the current column in the line by underlining it via an ANSI color code.
Meaning that if you enable one, the other is automatically disabled by LLDB.
This was caused by the fact that both features inserted color codes into the the
source code and were likely to interfere with each other (which would result
in a broken source code printout to the user).
This patch moves the cursor code into the highlighting framework, which provides
the same feature to the user in normal non-C source code. For any source code
that is highlighted by Clang, we now also have cursor marking for the whole token
that is under the current source location. E.g., before we underlined only the '!' in the
expression '1 != 2', but now the whole token '!=' is underlined. The same for function
calls and so on. Below you can see two examples where we before only underlined
the first character of the token, but now underline the whole token.
{F7075400}
{F7075414}
It also simplifies the DisplaySourceLines method in the SourceManager as most of
the code in there was essentially just for getting this column marker to work as
a FormatEntity.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D51466
llvm-svn: 341003
As we only use PATH_MAX for an assert in a unit test that is supposed
to catch the random failures on the Swift CI bots, we might as well
just ifdef this assert out on Windows.
llvm-svn: 340652
Summary:
The DirCompletionAbsolute is still randomly failing on the nodes even after D50722, so this patch adds more asserts
that verify certain properties on which the actual completion implementation relies on.
The first assert checks that the directory we complete on actually exists. If the directory doesn't exist on the
next CI failure, this assert should catch it and we know that the 0 matches come from a missing base directory.
The second assert is just checking that we are below the PATH_MAX limit that the completion checks against.
This check could randomly fail if the temporary directories we generate are sometimes longer than PATH_MAX,
and the assert can tell us that this is the reason we failed (instead of the mysterious '0 matches').
(As a sidenote: We shouldn't be checking against PATH_MAX anyway in the code (as this is just wrong). Also
the disk completion API really needs a better error mechanism than returning 0 on both error or no-results.)
Reviewers: aprantl, friss
Reviewed By: aprantl
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D51111
llvm-svn: 340589
Summary:
There is currently a way to skip the debugserver build. See how the CMake
variables SKIP_DEBUGSERVER and LLDB_CODESIGN_IDENTITY are used if you're
interested in that.
This allows us to skip building lldb-server as well. There is another
debug server called ds2 that can be used with LLDB. If you choose to use
ds2, this flag is very useful because it can cut down the build time of LLDB.
Differential Revision: https://reviews.llvm.org/D49282
llvm-svn: 340560
Summary:
CompletionTest.DirCompletionAbsolute had a random failure on a CI node
(in the failure, the completion count was 0, while we expected it to be 1),
but there seems no good reason for it to fail. The sanitizers don't complain
about the test when it's run, so I think we don't have some uninitialized
memory that we access here.
My best bet is that the unique directory selection randomly failed on the CI
node because maybe the FS there doesn't actually guarantee the atomic fopen
assumptions we make in the LLVM code (or some other funny race condition).
In this case a different test run could get the same directory and clean its contents
which would lead to 0 results.
The other possible explanation is that someone changed the CI configuration
on the node and changed the working dir to something very long, which would
make our PATH_MAX test fail (which also leads to 0 results), but I think that case
is unlikely.
This patch is just a stab in the dark that (hopefully) fixes this random failure by
giving each test a (more) unique working directory by appending the unique
test name to the temp-dir prefix. Also adds one more ASSERT_NO_ERROR to
one of our chdir calls just in case that is the reason for failing.
The good thing is that this refactor gets rid of most of the static variables
and files that we previously had as shared state between the different tests.
Potentially fixes rdar://problem/43150260
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: jfb, lldb-commits
Differential Revision: https://reviews.llvm.org/D50722
llvm-svn: 339715
Summary:
This issue came up because it caused problems in our unit tests. The StringPool did connect counterparts only once and silently ignored the values passed in subsequent calls.
The simplest solution for the unit tests would be silent overwrite. In practice, however, it seems useful to assert that we never overwrite a different mangled counterpart.
If we ever have mangled counterparts for other languages than C++, this makes it more likely to notice collisions.
I added an assertion that allows the following cases:
* inserting a new value
* overwriting the empty string
* overwriting with an identical value
I fixed the unit tests, which used "random" strings and thus produced collisions.
It would be even better if there was a way to reset or isolate the StringPool, but that's a different story.
Reviewers: jingham, friss, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D50536
llvm-svn: 339669
Summary:
We can optimize and refactor some of the classes in RangeMap.h, but first
we should have some tests for all the data structures in there. This adds a first
batch of tests for the Range class itself.
There are some unexpected results happening when mixing invalid and valid ranges, so
I added some FIXME's for that in the tests.
Reviewers: vsk
Reviewed By: vsk
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50620
llvm-svn: 339611
Summary:
Removing FastDemangle will greatly reduce maintenance efforts. This patch replaces the last point of use in LLDB. Semantics should be kept intact.
Once this is agreed upon, we can:
* Remove the FastDemangle sources
* Add more features e.g. substitutions in template parameters, considering all variations, etc.
Depends on LLVM patch https://reviews.llvm.org/D50586
Reviewers: erik.pilkington, friss, jingham, JDevlieghere
Subscribers: kristof.beyls, chrib, lldb-commits
Differential Revision: https://reviews.llvm.org/D50587
llvm-svn: 339583
Summary: It was not immediately clear to me whether or not non-null-terminated StringRef's are supported in ConstString and/or the counterpart mechanism. From this test it seems to be fine. Maybe useful to keep?
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D50334
llvm-svn: 339292
Summary:
I set up a new review, because not all the code I touched was marked as a change in old one anymore.
In preparation for this review, there were two earlier ones:
* https://reviews.llvm.org/D49612 introduced the ItaniumPartialDemangler to LLDB demangling without conceptual changes
* https://reviews.llvm.org/D49909 added a unit test that covers all relevant code paths in the InitNameIndexes() function
Primary goals for this patch are:
(1) Use ItaniumPartialDemangler's rich mangling info for building LLDB's name index.
(2) Provide a uniform interface.
(3) Improve indexing performance.
The central implementation in this patch is our new function for explicit demangling:
```
const RichManglingInfo *
Mangled::DemangleWithRichManglingInfo(RichManglingContext &, SkipMangledNameFn *)
```
It takes a context object and a filter function and provides read-only access to the rich mangling info on success, or otherwise returns null. The two new classes are:
* `RichManglingInfo` offers a uniform interface to query symbol properties like `getFunctionDeclContextName()` or `isCtorOrDtor()` that are forwarded to the respective provider internally (`llvm::ItaniumPartialDemangler` or `lldb_private::CPlusPlusLanguage::MethodName`).
* `RichManglingContext` works a bit like `LLVMContext`, it the actual `RichManglingInfo` returned from `DemangleWithRichManglingInfo()` and handles lifetime and configuration. It is likely stack-allocated and can be reused for multiple queries during batch processing.
The idea here is that `DemangleWithRichManglingInfo()` acts like a gate keeper. It only provides access to `RichManglingInfo` on success, which in turn avoids the need to handle a `NoInfo` state in every single one of its getters. Having it stored within the context, avoids extra heap allocations and aids (3). As instantiations of the IPD the are considered expensive, the context is the ideal place to store it too. An efficient filtering function `SkipMangledNameFn` is another piece in the performance puzzle and it helps to mimic the original behavior of `InitNameIndexes`.
Future potential:
* `DemangleWithRichManglingInfo()` is thread-safe, IFF using different contexts in different threads. This may be exploited in the future. (It's another thing that it has in common with `LLVMContext`.)
* The old implementation only parsed and indexed Itanium mangled names. The new `RichManglingInfo` can be extended for various mangling schemes and languages.
One problem with the implementation of RichManglingInfo is the inaccessibility of class `CPlusPlusLanguage::MethodName` (defined in source/Plugins/Language/..), from within any header in the Core components of LLDB. The rather hacky solution is to store a type erased reference and cast it to the correct type on access in the cpp - see `RichManglingInfo::get<ParserT>()`. At the moment there seems to be no better way to do it. IMHO `CPlusPlusLanguage::MethodName` should be a top-level class in order to enable forward delcarations (but that is a rather big change I guess).
First simple profiling shows a good speedup. `target create clang` now takes 0.64s on average. Before the change I observed runtimes between 0.76s an 1.01s. This is still no bulletproof data (I only ran it on one machine!), but it's a promising indicator I think.
Reviewers: labath, jingham, JDevlieghere, erik.pilkington
Subscribers: zturner, clayborg, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50071
llvm-svn: 339291
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary: `IsEmpty()` and `operator bool() == false` have equal semantics. Usage in Mangled::GetDemangledName() was incorrect. What it actually wants is a check for null-string. Split this off of D50071 and added a test to clarify usage.
Reviewers: labath, jingham
Subscribers: erik.pilkington, lldb-commits
Differential Revision: https://reviews.llvm.org/D50327
llvm-svn: 339014
Summary:
This patch allows LLDB's Stream class to count the bytes it has written to so far.
There are two major motivations for this patch:
The first one is that this will allow us to get rid of all the handwritten byte counting code
we have in LLDB so far. Examples for this are pretty much all functions in LLDB that
take a Stream to write to and return a size_t, which usually represents the bytes written.
By moving to this centralized byte counting mechanism, we hopefully can avoid some
tricky errors that happen when some code forgets to count the written bytes while
writing something to a stream.
The second motivation is that this is needed for the migration away from LLDB's `Stream`
and towards LLVM's `raw_ostream`. My current plan is to start offering a fake raw_ostream
class that just forwards to a LLDB Stream.
However, for this raw_ostream wrapper we need to fulfill the raw_ostream interface with
LLDB's Stream, which currently lacks the ability to count the bytes written so far (which
raw_ostream exposes by it's `tell()` method). By adding this functionality it is trivial to start
rolling out our raw_ostream wrapper (and then eventually completely move to raw_ostream).
Also, once this fake raw_ostream is available, we can start replacing our own code writing
to LLDB's Stream by LLVM code writing to raw_ostream. The best example for this is the
LEB128 encoding we currently ship, which can be replaced with by LLVM's version which
accepts an raw_ostream.
From the point of view of the pure source changes this test does, we essentially just renamed
the Write implementation in Stream to `WriteImpl` while the `Write` method everyone is using
to write its raw bytes is now just forwarding and counting the written bytes.
Reviewers: labath, davide
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D50159
llvm-svn: 338733
Summary: In order to exploit the potential of LLVM's new ItaniumPartialDemangler for indexing in LLDB, we expect conceptual changes in the implementation of the InitNameIndexes function. Here is a unit test that aims at covering all relevant code paths in that function.
Reviewers: labath, jingham, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: friss, teemperor, davide, clayborg, erik.pilkington, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D49909
llvm-svn: 338695
Summary:
This patch adds syntax highlighting support to LLDB. When enabled (and lldb is allowed
to use colors), printed source code is annotated with the ANSI color escape sequences.
So far we have only one highlighter which is based on Clang and is responsible for all
languages that are supported by Clang. It essentially just runs the raw lexer over the input
and then surrounds the specific tokens with the configured escape sequences.
Reviewers: zturner, davide
Reviewed By: davide
Subscribers: labath, teemperor, llvm-commits, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D49334
llvm-svn: 338662
Summary:
When I added the Stream unit test (r338488), the build bots failed due to an out-of-
bound reads when passing an empty string to the PutCStringAsRawHex8 method.
In r338491 I removed the test case to fix the bots.
This patch fixes this in PutCStringAsRawHex8 by always checking for the terminating
null character in the given string (instead of skipping it the first time). It also re-adds the
test case I removed.
Reviewers: vsk
Reviewed By: vsk
Subscribers: vsk, lldb-commits
Differential Revision: https://reviews.llvm.org/D50149
llvm-svn: 338637
The suspicious behavior is obviously because this method reads
OOB memory, so I'll remove it for now and re-add the test alongside
the fix later.
llvm-svn: 338491
Summary:
This adds an initial small unit test for LLDB's Stream class, which should at least cover
most of the functions in the Stream class. StreamString is always in big endian
mode, so that's the only stream byte order path this test covers as of now. Also,
the binary mode still needs to be tested for all print methods.
Also adds some FIXMEs for wrong/strange result values of the Stream class that we hit
while testing those functions.
Reviewers: labath
Reviewed By: labath
Subscribers: probinson, labath, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50027
llvm-svn: 338488
Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
Replace the existing combination of FastDemangle and the fallback to llvm::itaniumDemangle() with LLVM's new ItaniumPartialDemangler. It slightly reduces complexity and slightly improves performance, but doesn't introduce conceptual changes. This patch is preparing for more fundamental improvements on LLDB's demangling approach.
Reviewers: friss, jingham, erik.pilkington, labath, clayborg, mgorny, davide, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: teemperor, JDevlieghere, labath, clayborg, davide, lldb-commits, mgorny, erik.pilkington
Differential Revision: https://reviews.llvm.org/D49612
llvm-svn: 337931
The new test checks that we are actually able to read data from these
kinds of elf headers correctly instead of just that we read the section
number correctly. It is also easier to figure out what's going on in the
test.
llvm-svn: 337459
Summary:
This patch fixes a few problems with the FormatAnsiTerminalCodes function:
* It does an infinite loop on an unknown color value.
* It crashes when the color value is at the end of the string.
* It deletes the first character behind the color token.
Also added a few tests that reproduce those problems (and test some other corner cases).
Reviewers: davide, labath
Reviewed By: labath
Subscribers: labath, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D49307
llvm-svn: 337189
Summary:
As suggested in D48796, this patch replaces even more internal calls that were using the old
completion API style with a single CompletionRequest. In some cases we also pass an option
vector/index, but as we don't always have this information, it currently is not part of the
CompletionRequest class.
The constructor of the CompletionRequest is now also more sensible. You only pass the
user input, cursor position and your list of matches to the request and the rest will be
inferred (using the same code we used before to calculate this). You also have to pass these
match window parameters to it, even though they are unused right now.
The patch shouldn't change any behavior.
Reviewers: jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48976
llvm-svn: 337031
Corrupted minidumps was leading to unpredictable behavior.
This change adds explicit consistency checks for the minidump early on. The
checks are not comprehensive but they should catch obvious structural violations:
streams with type == 0
duplicate streams (same type)
overlapping streams
truncated minidumps
Another early check is to make sure we actually support the minidump architecture
instead of crashing at a random place deep inside LLDB.
Differential Revision: https://reviews.llvm.org/D49202
llvm-svn: 336918
Summary:
A subset of the LLDB commands follows this command line interface style:
<command name> [arguments] -- <string suffix>
The parsing code for this interface has been so far been duplicated into the different
command objects which makes it hard to maintain and reuse elsewhere.
This patches improves the situation by adding a OptionsWithRaw class that centralizes
the parsing logic and allows easier testing. The different commands now just call this class to
extract the arguments and the raw suffix from the provided user input.
Reviewers: jingham
Reviewed By: jingham
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49106
llvm-svn: 336723
Summary:
This patch refactors the internal completion API. It now takes (as far as possible) a single
CompletionRequest object instead o half a dozen in/out/in-out parameters. The CompletionRequest
contains a common superset of the different parameters as far as it makes sense. This includes
the raw command line string and raw cursor position, which should make the `expr` command
possible to implement (at least without hacks that reconstruct the command line from the args).
This patch is not intended to change the observable behavior of lldb in any way. It's also as
minimal as possible and doesn't attempt to fix all the problems the API has.
Some Q&A:
Q: Why is this not fixing all the problems in the completion API?
A: Because is a blocker for the expr command completion which I want to get in ASAP. This is the
smallest patch that unblocks the expr completion patch and which allows trivial refactoring in the future.
The patch also doesn't really change the internal information flow in the API, so that hopefully
saves us from ever having to revert and resubmit this humongous patch.
Q: Can we merge all the copy-pasted code in the completion methods
(like computing the current incomplete arg) into CompletionRequest class?
A: Yes, but it's out of scope for this patch.
Q: Why the `word_complete = request.GetWordComplete(); ... ` pattern?
A: I don't want to add a getter that returns a reference to the internal integer. So we have
to use a temporary variable and the Getter/Setter instead. We don't throw exceptions
from what I can tell, so the behavior doesn't change.
Q: Why are we not owning the list of matches?
A: Because that's how the previous API works. But that should be fixed too (in another patch).
Q: Can we make the constructor simpler and compute some of the values from the plain command?
A: I think this works, but I rather want to have this in a follow up commit. Especially when making nested
request it's a bit awkward that the parsed arguments behave as both input/output (as we should in theory
propagate the changes on the nested request back to the parent request if we don't want to change the
behavior too much).
Q: Can't we pass one const request object and then just return another result object instead of mixing
them together in one in/out parameter?
A: It's hard to get keep the same behavior with that pattern, but I think we can also get a nice API with just
a single request object. If we make all input parameters read-only, we have a clear separation between what
is actually an input and what an output parameter (and hopefully we get rid of the in-out parameters).
Q: Can we throw out the 'match' variables that are not implemented according to the comment?
A: We currently just forward them as in the old code to the different methods, even though I think
they are really not used. We can easily remove and readd them once every single completion method just
takes a CompletionRequest, but for now I prefer NFC behavior from the perspective of the API user.
Reviewers: davide, jingham, labath
Reviewed By: jingham
Subscribers: mgorny, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48796
llvm-svn: 336146
Summary:
The data structure is optimized for the case where the UUID size is <=
20 bytes (standard length emitted by the GNU linkers), but larger sizes
are also possible.
I've modified the string conversion function to support the new sizes as
well. For standard UUIDs it maintains the traditional formatting
(4-2-2-2-6). If a UUID is shorter, we just cut this sequence short, and
for longer UUIDs it will just repeat the last 6-byte block as long as
necessary.
I've also modified ObjectFileELF to take advantage of the new UUIDs and
avoid manually padding the UUID to 16 bytes. While there, I also made
sure the computed UUID does not depend on host endianness.
Reviewers: clayborg, lemo, sas, davide, espindola
Subscribers: emaste, arichardson, lldb-commits
Differential Revision: https://reviews.llvm.org/D48633
llvm-svn: 335963
Now that we have gmock, we can use its matchers to better express the
test assertions. The main advantage of this is that when things fail,
the test will now print the expected and actual lists of completed
strings instead of just a not-very-helpful "false is not true" message.
llvm-svn: 335955
Summary:
The test fails because we don't rewrite the slash behind `foo` to the OS specific
separator (as the completion API doesn't support this kind of rewriting). However,
we assume that this part of the string is rewritten in the test case, which broke
on Windows.
Reviewers: stella.stamenova
Reviewed By: stella.stamenova
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48746
llvm-svn: 335934
Summary:
During the previous attempt to generalize the UUID class, it was
suggested that we represent invalid UUIDs as length zero (previously, we
used an all-zero UUID for that). This meant that some valid build-ids
could not be represented (it's possible however unlikely that a checksum of
some file would be zero) and complicated adding support for variable
length build-ids (should a 16-byte empty UUID compare equal to a 20-byte
empty UUID?).
This patch resolves these issues by introducing a canonical
representation for an invalid UUID. The slight complication here is that
some clients (MachO) actually use the all-zero notation to mean "no UUID
has been set". To keep this use case working (while making it very
explicit about which construction semantices are wanted), replaced the
UUID constructors and the SetBytes functions with named factory methods.
- "fromData" creates a UUID from the given data, and it treats all bytes
equally.
- "fromOptionalData" first checks the data contents - if all bytes are
zero, it treats this as an invalid/empty UUID.
Reviewers: clayborg, sas, lemo, davide, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D48479
llvm-svn: 335612
Instead of a separate GetBytes + GetByteSize methods I introduce a
single GetBytes method returning an ArrayRef.
This is NFC cleanup now, but it should make handling arbitrarily-sized
UUIDs cleaner, should we choose to go that way. I also took the
opportunity to add some unit tests for this class.
llvm-svn: 335244
StringConvert was the only non-Utility dependency of this class. Getting
rid of it means it will be easy to move this class to a lower layer.
While I was in there, I also added a couple of unit tests for the Scalar
string conversion function.
llvm-svn: 335060
Summary:
Instead of a function taking an enum value determining which path to
return, we now have a suite of functions, each returning a single path
kind. This makes it easy to move the python-path function into a
specific plugin in a follow-up commit.
All the users of GetLLDBPath were converted to call specific functions
instead. Most of them were hard-coding the enum value anyway, so this
conversion was simple. The only exception was SBHostOS, which I've
changed to use a switch on the incoming enum value.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48272
llvm-svn: 335052
Summary:
This has multiple advantages:
- we need only one function argument/instance variable instead of three
- no need to default initialize variables
- no custom parsing code
- VersionTuple has comparison operators, which makes version comparisons much
simpler
Reviewers: zturner, friss, clayborg, jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D47889
llvm-svn: 334950
r334615 changed the the value of FileSpec.IsRelative("/") for windows
path syntax. We previously considered it absolute but now it is
considered relative (I guess because it's interpretation depends on the
current drive).
This cause a failure in PathMappingList test, which assumed that "/"
will not get remapped as it is an absolute path. As this is no longer
true on windows, I replace "/" with a really absolute path.
llvm-svn: 334702
With the recent changes in FileSpec to use LLVM's path style, it is
possible to delegate a bunch of common path operations to LLVM's path
helpers. This means we only have to maintain a single implementation and
at the same time can benefit from the efforts made by the rest of the
LLVM community.
This is part one of a set of patches. There was no obvious way to split
this so I just worked from top to bottom.
Differential revision: https://reviews.llvm.org/D48084
llvm-svn: 334615
This simplifies some code which had StringRefs to begin with, and
makes other code more complicated which had const char* to begin
with.
In the end, I think this makes for a more idiomatic and platform
agnostic API. Not all platforms launch process with null terminated
c-string arrays for the environment pointer and argv, but the api
was designed that way because it allowed easy pass-through for
posix-based platforms. There's a little additional overhead now
since on posix based platforms we'll be takign StringRefs which
were constructed from null terminated strings and then copying
them to null terminate them again, but from a readability and
usability standpoint of the API user, I think this API signature
is strictly better.
llvm-svn: 334518
Summary:
The patch adds support of splitted functions (when MSVC is used with PGO) and function-level linking feature.
SymbolFilePDB::ParseCompileUnitLineTable function relies on fact that ranges of compiled source files in the binary are continuous and don't intersect each other. The function creates LineSequence for each file and inserts it into LineTable, and implementation of last one relies on continuity of the sequence. But it's not always true when function-level linking enabled, e.g. in added input test file test-pdb-function-level-linking.exe there is xstring's std__basic_string_char_std__char_traits_char__std__allocator_char_____max_size (.00454820) between test-pdb-function-level-linking.cpp's foo (.00454770) and main (.004548F0).
To fix the problem this patch renews the sequence on each address gap.
Reviewers: asmith, zturner
Reviewed By: asmith
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D47708
llvm-svn: 334030
Host depended on clang because HostInfo had a function to get
the directory where clang was installed. We move this over to
the clang expression parser plugin where it's more at home.
Differential Revision: https://reviews.llvm.org/D47384
llvm-svn: 333933
When reading DBGSourcePathRemapping from a dSYM, we remove the last two
path components to make the source lookup more general. However, when
dealing with a relative path that has less than 2 components, we ended
up with an invalid (empty) FileSpec.
This patch changes the behavior of removeLastPathComponent to remove the
last path component, if possible. It does this by checking whether a
parent path exists, and if so using that as the new path. We rely
entirely on LLVM's path implementation to do the heavy lifting.
We now also return a boolean which indicates whether the operator was
successful or not.
Differential revision: https://reviews.llvm.org/D47495
rdar://37791687
llvm-svn: 333540
The tests added in r332842 don't work on windows, because they do path
comparisons on strings, and on windows, the paths coming out of the
mappings had backslashes in them.
This switches comparisons to FileSpecs, so the results come out right.
llvm-svn: 333074
PathMappingList was broken for relative and empty paths after normalization changes in FileSpec. There were also no tests for PathMappingList so I added those.
Changes include:
Change PathMappingList::ReverseRemapPath() to take FileSpec objects instead of ConstString. The only client of this was doing work to convert to and from ConstString objects for no reason.
Normalize all paths prefix and replacements that are added to the PathMappingList vector so they match the paths that have been already normalized in the debug info
Unify code in the two forms of PathMappingList::RemapPath() so only one contains the actual functionality. Prior to this, there were two versions of this code.
Use FileSpec::AppendPathComponent() and remove a long standing TODO so paths are correctly appended to each other.
Added tests for absolute, relative and empty paths.
Differential Revision: https://reviews.llvm.org/D47021
llvm-svn: 332842
After switching to LLVM normalization, if we init FileSpec with "." we would end up with m_directory being NULL and m_filename being "".
This patch fixes this by allowing the path to be normalized and if it normalized to nothing, set it to m_filename.
Differential Revision: https://reviews.llvm.org/D46783
llvm-svn: 332618
Summary:
1) In logtest.cpp, the name of the file that is reported is not always capitalized, so split the comparison to validate the file (case insensitive) and function (case sensitive) separately
2) Update the gdb remote client tests to work with Python 3. In Python 3, socket sends/receives data as bytes rather than byte strings. This also updates the usage of .hex() - this is no longer available in Python 3, so use hexlify instead
Reviewers: asmith, labath, zturner
Reviewed By: labath
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46773
llvm-svn: 332293
The first fix wasn't enough, there is still a missing
ProcessInstanceInfo include in Host.mm. I won't be able to test a fix
before leaving work, so I am reverting both commits.
This reverts commit r332250 and the subsequent fix attempt.
llvm-svn: 332261
The Process class was only being referenced because of the last-ditch
effort in the process launchers to set a process death callback in case
one isn't set already.
Although launching a process for debugging is the most important kind of
"launch" we are doing, it is by far not the only one, so assuming this
particular callback is the one to be used is not a good idea (besides
breaking layering). Instead of assuming a particular exit callback, I
change the launcher code to require the callback to be set by the user (and fix
up the two call sites which did not set the callback already).
Reviewers: jingham, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46395
llvm-svn: 332250
Summary:
The llvm version of the enum has the same enumerators, with stlightly
different names, so this is mostly just a search&replace exercise. One
concrete benefit of this is that we can remove the function for
converting between the two enums.
To avoid typing llvm::sys::path::Style::windows everywhere I import the
enum into the FileSpec class, so it can be referenced as
FileSpec::Style::windows.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46753
llvm-svn: 332247
Inside Xcode and in Xcode toolchains LLDB is always in lockstep
with the Swift compiler, so it can reuse its Clang resource
directory. This allows LLDB and the Swift compiler to share the
same Clang module cache.
rdar://problem/40039633
Differential Revision: https://reviews.llvm.org/D46736
llvm-svn: 332111
Summary:
now that llvm supports host-agnostic path manipulation functions (and
most of their kinks have been ironed out), we can remove our copies of
the path parsing functions in favour of the llvm ones.
This should be NFC except for the slight difference in handling of the
"//" path, which is now normalized to "/" (this only applies to the
literal "//" path; "//net" and friends still get to keep the two
slashes).
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46687
llvm-svn: 332088
I was considering modifying this function, so I wrote some tests to make
sure I don't regress its behavior. I am not sure if I will actually
proceed with the modifications, but the tests seem useful nonetheless.
llvm-svn: 331966
Summary: The current setup for the unit tests only works correctly when the generator does not support multiple configurations. When the generator supports multiple configurations, the inputs are not copied to the correct per-configuration directory. This change sets up the build to copy the inputs in each configuration directory.
Reviewers: labath, asmith, zturner
Reviewed By: labath
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46642
llvm-svn: 331914
Summary:
The comments on this class were out of date with the implementation, and
the implementation itself was inconsistent with our usage of the Timeout
class (I started converting everything to use this class back in D27136,
but I missed this one). I avoid duplicating the waiting logic by
introducing a templated WaitFor function, and make other functions
delegate to that. This function can be also used as a replacement for
the unused WaitForBitToBeSet functions I removed, if it turns out to be
necessary.
As this changes the meaning of a "zero" timeout, I tracked down all the
callers of these functions and updated them accordingly. Propagating the
changes to all the callers of RunShellCommand was a bit too much for
this patch, so I stopped there and will continue that in a follow-up
patch.
I also add some basic unittests for the functions I modified.
Reviewers: jingham, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D46580
llvm-svn: 331880
In case we are building with xml enabled, the GetMemoryRegionInfo
function will send extra packets to query te extended memory map, which
the tests were not expecting.
Add an expectation for this to the test. Right now, it's just a basic
one which pretends we don't support the extension, however, it would be
also interesting the add a test which verifies the extension-enabled
case.
I also noticed that the test does a pretty lousy job of validating the
returned memory region info, so I add a couple of extra assertions to
improve that.
llvm-svn: 331374
Always normalizing lldb_private::FileSpec paths will help us get a consistent results from comparisons when setting breakpoints and when looking for source files. This also removes a lot of complexity from the comparison routines. Modified the DWARF line table parser to use the normalized compile unit directory if needed.
Differential Revision: https://reviews.llvm.org/D45977
llvm-svn: 331049
The default packet timeout of 1 second is a bit too small for these
tests, particularly as they are working in ack-mode, which means they
need to fit twice as many packets into the timeslot.
This does not seem to be a problem on the bots, but for some people
these tests are timing out regularly. I can't be sure increasing this
will solve their problem, but this does seem like a likely culprit.
llvm-svn: 330578
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
There are plenty of ways attaching can go wrong. Having the server
report the exact error means we can give better feedback to the user.
(This patch does not do the second part, it only makes sure the
information is sent from the server.)
Triggering all possible error conditions in a test would prove
challenging, but there is one error that is very easy to reproduce
(attempting to attach while debugging), so I write a test based on that.
The test immediately exposed a bug where the m_send_error_strings field
was being used uninitialized (so it was sometimes true from the get-go),
so I fix that as well.
llvm-svn: 329803
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
Remove Scalar::Cast.
It was noted on the list that this method is unused. So, this patch
removes it.
Fix Scalar::Promote for most integer types
This fixes promotion of most integer types (128- and 256-bit types are
handled in a subsequent patch) to floating-point types. Previously
promotion was done bitwise, where value preservation is correct.
Fix Scalar::Promote for 128- and 256-bit integer types
This patch fixes the behavior of Scalar::Promote when trying to
perform a binary operation involving a 128- or 256-bit integer type
and a floating-point type. Now, the integer is cast to the floating
point type for the operation.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D44907
llvm-svn: 328985
Summary:
We've had a mismatch in the checksum computation between the sender and
receiver. The sender computed the payload checksum using the wire
encoding of the packet, while the receiver did this after expanding
un-escaping and expanding run-length-encoded sequences. This resulted in
communication breakdown if packets using these feature were sent in the
ack mode.
Normally, this did not cause any issues since the only packet we send in
the ack-mode is the QStartNoAckMode packet, but I ran into this when
debugging the lldb-server tests which (for better or worse) don't use
this mode.
According to the gdb-remote documentation "The two-digit checksum is computed as
the modulo 256 sum of all characters between the leading ‘$’ and the
trailing ‘#’", it seems that our sender is doing the right thing here.
Therefore, I fix the receiver the match the sender behavior and add a
test.
With this bug fixed, we can see that lldb-server is sending a stop-reply
after receiving the "k" in the same way as debugserver does (but we
weren't detecting this because at that point the connection was dead
already). I fix that expectation as well.
Reviewers: clayborg, jasonmolenda
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D44922
llvm-svn: 328693
The lldb-server unit tests don't test the right thing when the debug
server in use is copied from somewhere else. This can lead to spurious
test failures.
Disable these unit tests when an external debug server is in use.
Fixes llvm.org/PR36494.
llvm-svn: 326001
Removing the template arguments and most of the mutating methods from
CleanUp makes it easier to understand and reuse.
In its present state, CleanUp would be too cumbersome to adapt to cases
where multiple objects need to be released. Take for example this change
in swift-lldb:
https://github.com/apple/swift-lldb/pull/334/files#diff-6f474df750f75c8ba675f2a8408a5629R219
This change is simple to express with the new CleanUp, but not so simple
with the old version.
Differential Revision: https://reviews.llvm.org/D43662
llvm-svn: 325964
Summary:
The issue was that we were parsing the registers into 64-bit integers
and the calling swapByteOrder without regard for the actual size of the
register. This switches the test to use the RegisterValue class which
tracks the register size, and knows how to initialize itself from a
piece of memory (so we don't need to swap byte order ourselves).
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43376
llvm-svn: 325511
Summary:
Right now the test client is not parsing register values correctly,
which is manifesting itself in one test failing on 32-bit architectures
(pr36013). This parses the information from the qRegisterInfo packets
and stores it in the client, which will enable fixing the parsing in a
follow up commit.
I am also adding a new templated SendMessage overload, which enables one
to send a message get a parsed response in a single call.
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43076
llvm-svn: 324722
Now incorrect type argument that looks like T<A><B> doesn't
cause an assert, but just a parsing error.
Bug: 36224
Differential Revision: https://reviews.llvm.org/D42939
llvm-svn: 324380
Davide pointed out this would be useful if the file ever needs to be
regenerated (and I certainly agree).
I also replace the test binary with a slightly smaller one -- I intended
to do this in the original commit, but I forgot to add it to the patch
as I was juggling several things at the same time.
llvm-svn: 324256
ObjectFileELF::GetModuleSpecifications contained a lot of tip-toing code
which was trying to avoid loading the full object file into memory. It
did this by trying to load data only up to the offset if was accessing.
However, in practice this was useless, as 99% of object files we
encounter have section headers at the end, so we would load the whole
file as soon as we start parsing the section headers.
In fact, this would break as soon as we encounter a file which does
*not* have section headers at the end (yaml2obj produces these), as the
access to .strtab (which we need to get the section names) was not
guarded by this offset check.
As this strategy was completely ineffective anyway, I do not attempt to
proliferate it further by guarding the .strtab accesses. Instead I just
lead the full file as soon as we are reasonably sure that we are indeed
processing an elf file.
If we really care about the load size here, we would need to reimplement
this to just load the bits of the object file we need, instead of
loading everything from the start of the object file to the given
offset. However, given that the OS will do this for us for free when
using mmap, I think think this is really necessary.
For testing this I check a (tiny) SO file instead of yaml2obj-ing it
because the fact that they come out first is an implementation detail of
yaml2obj that can change in the future.
llvm-svn: 324254
Summary:
The difference between this and regular LLDB_LOG is that this one clears
the error object unconditionally. This was inspired by the
ObjectFileELF bug (r322664), where the error object was being cleared
only if logging was enabled.
Reviewers: davide, zturner, jingham, clayborg
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D42182
llvm-svn: 323753
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary: We can't use unique_ptr's here because we use those variables as `out` parameters to some functions. Discovered by the memory sanitizer.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42386
llvm-svn: 323138
Summary: float can't represent the given value in the literal, so we get this UB error: `runtime error: 1.23457e+48 is outside the range of representable values of type 'float'`. The test seems to not rely on this specific value, so let's just choose a smaller one that can be represented.
Reviewers: uweigand
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42338
llvm-svn: 323081
Summary: We never delete the created instances, so those test fail with the memory sanitizer.
Reviewers: jasonmolenda
Reviewed By: jasonmolenda
Subscribers: aemerson, javed.absar, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D42336
llvm-svn: 323076
Summary:
- Fix a null array access bug. This happens when creating the lldb type for a function that has no argument.
- Implement SymbolFilePDB::ParseTypes method. Using `lldb-test symbols` will show all supported types in the target.
- Create lldb types for variadic function, PDBSymbolTypePointer, PDBSymbolTypeBuiltin
- The underlying builtin type for PDBSymbolTypeEnum is always `Int`, correct it with the very first enumerator's encoding if any. This is more accurate when the underlying type is not signed or another integer type.
- Fix a bug when the compiler type is not created based on PDB_BuiltinType. For example, basic type `long` is of same width as `int` in a 32-bit target, and the compiler type of former one will be represented by the one generated for latter if using the default method. Introduce a static function GetBuiltinTypeForPDBEncodingAndBitSize to correct this issue.
- Basic type `long double` and `double` have the same bit size in MSVC and there is no information in a PDB to distinguish them. The compiler type of the former one is represented by the latter's.
- There is no line informaton about typedef, enum etc in a PDB and the source and line information for them are not shown.
- There is no information about scoped enumeration. The compiler type is represented as an unscoped one.
Reviewers: zturner, lldb-commits, davide, asmith
Reviewed By: zturner, asmith
Subscribers: llvm-commits, davide
Differential Revision: https://reviews.llvm.org/D41427
llvm-svn: 322995
This removes boilerplate for setting up a log channel and capturing the
output from some of the tests. I do this by moving the setup code into a
test fixture and adding a logAndTakeOutput utility function to log some
string and then retrieve it from the log.
I also use some googlemock goodies to simplify a couple of assertions.
llvm-svn: 322653
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Summary: D41086 fixed an exception in FindTypes()/FindTypesByRegex() and caused two lldb unit test to fail. This change updates the unit tests to pass again.
Reviewers: zturner, lldb-commits, labath, clayborg, asmith
Reviewed By: asmith
Differential Revision: https://reviews.llvm.org/D41550
llvm-svn: 321511
Summary:
Make sure we propagate environment when starting debugserver with a pre-loaded
inferior. AFAIK, RNBRunLoopLaunchInferior is only called in pre-loaded inferior
scenario, so we can just pick up the debugserver environment instead of trying
to construct an envp from the (empty) context.
This makes debugserver pass an test added for an equivalent lldb-server fix.
Reviewers: jasonmolenda, clayborg
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D41352
llvm-svn: 321355
Summary:
It was possible when searching for a symbol by regex in a pdb that an invalid regex would cause an exception on Windows. This updates the code to avoid throwing an exception.
When fixing the exception it was decided there is no reason to search for a symbol in a pdb by regex. To support this, SymbolFilePDB::FindTypes() now only searches for types by name and no longer calls FindTypesByRegEx().
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: clayborg
Differential Revision: https://reviews.llvm.org/D41086
llvm-svn: 321344
The recent UUID cleanups exposed a bug in the parsing code for the
jModulesInfo response, which was passing wrong value for the second
argument to UUID::SetFromStringRef (it passed the length of the string,
whereas the correct value should be the number of decoded bytes we
expect to receive).
This was not picked up by tests, because they test with 16-byte uuids,
for which the function happens to do the right thing even if the length
does not match (if the length does not match, the function does not
update m_num_uuid_bytes member, but that member is already 16 to begin
with).
I fix that and add a test with 20-byte uuid to catch if this regresses.
I have also added more safeguards into the parsing code to fail if we
cannot parse the entire uuid field we recieve. While testing the latter
part, I noticed that the "negative" jModulesInfo tests were succeeding
because we were sending malformed json (and not because the json
contents was invalid), so I make those tests a bit more robuts as well.
llvm-svn: 320985
Summary:
We were failing to propagate the environment when lldb-server was
started with a pre-loaded process
(e.g.: lldb-server gdbserver -- inferior --inferior_args)
This patch makes sure the environment is propagated. Instead of adding a
new GDBRemoteCommunicationServerLLGS::SetLaunchEnvironment function to
complement SetLaunchArgs and SetLaunchFlags, I replace these with a
more generic SetLaunchInfo, which can be used to set any launch-related
property.
The accompanying test also verifies that the server correctly terminates
the connection after sending the exit packet (specifically, that it does
not send the exit packet twice).
Reviewers: clayborg, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41070
llvm-svn: 320984
Summary:
lldb-server was sending the "exit" packet (W??) twice. This happened
because it was handling both the pre-exit (PTRACE_EVENT_EXIT) and
post-exit (WIFEXITED) as exit events. We had some code which was trying
to detect when we've already sent the exit packet, but this stopped
working quite a while ago.
This never really caused any problems in practice because the client
automatically closes the connection after receiving the first packet, so
the only effect of this was some warning messages about extra packets
from the lldb-server test suite, which were ignored because they didn't
fail the test.
The new test suite will be stricter about this, so I fix this issue
ignoring the first event. I think this is the correct behavior, as the
inferior is not really dead at that point, so it's premature to send the
exit packet.
There isn't an actual test yet which would verify the exit behavior, but
in my next patch I will add a test which will also test this
functionality.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41069
llvm-svn: 320961
Summary:
This makes StopReply class abstract, so that we can represent different
types of stop replies such as StopReplyStop and StopReplyExit (there
should also be a StopReplySignal, but I don't need that right now so I
haven't implemented it yet).
This prepares the ground for a new test I'm writing.
Reviewers: eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41067
llvm-svn: 320820
Summary:
We use the llvm decompressor to decompress SHF_COMPRESSED sections. This enables
us to read data from debug info sections, which are sometimes compressed,
particuarly in the split-dwarf case. This functionality is only available if
llvm is compiled with zlib support.
Reviewers: clayborg, zturner
Subscribers: emaste, mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D40616
llvm-svn: 320813
Summary:
Adding a new test would require one to duplicate a significant part of
the existing test that we have. This attempts to reduce that by moving
some part of that code to the test fixture. The StandardStartupTest
fixture automatically starts up the server and connects it to the
client. I also add a more low-level TestBase fixture, which allows one
to start up the client and server in a custom way (I am going to need
this for the test I am writing).
Reviewers: eugene, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41066
llvm-svn: 320809
Host::GetEnvironment returns a StringList, but the interface for
launching a process takes Args. The fact that we use two classes for
representing an environment is not ideal, but for now we should at least
have an easy way to convert between the two.
llvm-svn: 320366
Summary:
For ptys (at least on Linux), the end-of-file (closing of the slave FD)
is signalled by the POLLHUP flag. We were ignoring this flag, which
meant that when this happened, we would spin in a loop, continuously
calling poll(2) and not making any progress.
This makes sure we treat POLLHUP as a read event (reading will return
0), and we call the registered callback when it happens. This is the
behavior our clients expect (and is consistent with how select(2)
works).
Reviewers: eugene, beanz
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41008
llvm-svn: 320345
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
1. Move TaskPool into the namespace lldb_private.
2. Add missing std::move in TaskPoolImpl::Worker.
3. std:🧵:hardware_concurrency may return 0,
handle this case correctly.
Differential revision: https://reviews.llvm.org/D40587
Test plan: make check-all
llvm-svn: 319492
Summary:
llvm::APSInt(0) asserts because it creates an int with bit-width 0 and
not (as I thought) a value 0.
Theoretically it should be sufficient to change this to APSInt(1), as
the intention there was that the value of the first argument should be
ignored if the type is invalid, but that would look dodgy.
Instead, I use llvm::Optional to denote an invalid value and use a
special struct instead of a std::pair, to reduce typing and increase
clarity.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40615
llvm-svn: 319414
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
In D39387, I was quick to jump to conclusion that ArchSpec has no
external dependencies. It turns there still was one call to
HostInfo::GetArchitecture left -- for implementing the "systemArch32"
architecture and friends.
Since GetAugmentedArchSpec is the place we handle these "incomplete"
triples that don't specify os or vendor and "systemArch" looks very much
like an incomplete triple, I move its handling there.
After this ArchSpec *really* does not have external dependencies, and
I'll move it to the Utility module as a follow-up.
Reviewers: zturner, clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39896
llvm-svn: 318046
Summary:
Despite it's name, GetTemplateArgument was only really working for Type
template arguments. This adds the ability to retrieve integral arguments
as well (which I've needed for the std::bitset data formatter).
I've done this by splitting the function into three pieces. The idea is
that one first calls GetTemplateArgumentKind (first function) to
determine the what kind of a parameter this is. Based on that, one can
then use specialized functions to retrieve the correct value. Currently,
I only implement two of these: GetTypeTemplateArgument and
GetIntegralTemplateArgument.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39844
llvm-svn: 318040
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Summary:
Without this, the launching of the test inferior may fail if it depends
on some component of the environment (most likely LD_LIBRARY_PATH). This
makes sure we propagate the environment variable to the inferior
process.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39010
llvm-svn: 316244
Summary:
This adds support for running the lldb-server test suite (currently consisting
of only one test) against the debugserver. Currently, the choice which binary
to test is based on the host system. This will need to be replaced by something
more elaborate if/when lldb-server starts supporting debugging on darwin.
I need to make a couple of tweaks to the test client to work with debugserver:
- debugserver has different command-line arguments - launching code adjusted to
handle that
- debugserver sends duplicate "medata" fields in the stop reply packet -
adjusted stop-reply parsing code to handle that
- debugserver replies to the k packet instead of just dropping the connection -
stopping code adjusted, although we should probably consider aligning the
behavior of the two stubs in this case
Reviewers: jmajors, beanz
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D35311
llvm-svn: 316010
* Prevent dumping of characters in DumpDataExtractor() with
item_byte_size bigger than 8 bytes. This case is not supported by the
code and results in a crash because the code calls
DataExtractor::GetMaxU64Bitfield() -> GetMaxU64() that asserts for
byte size > 8 bytes.
* Teach DataExtractor::GetMaxU64(), GetMaxU32(), GetMaxS64() and
GetMaxU64_unchecked() how to handle byte sizes that are not a multiple
of 2. This allows DumpDataExtractor() to dump characters and booleans
with item_byte_size in the interval of [1, 8] bytes. Values that are
not a multiple of 2 would previously result in a crash because they
were not handled by GetMaxU64().
llvm-svn: 315444
Summary:
At present, several gtests in the lldb open source codebase are using
#include statements rooted at $(SOURCE_ROOT)/${LLDB_PROJECT_ROOT}.
This patch cleans up this directory/include structure for both CMake and
Xcode build systems.
rdar://problem/33835795
Reviewers: zturner, jingham, beanz
Reviewed By: beanz
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D36598
llvm-svn: 314849
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
Turns out WITH_LOCKDOWN define changes the struct layout and constructor implementation for RNBSocket which is used in debugserver.cpp, so we need to make sure this is consistent.
In the future we should change WITH_LOCKDOWN to be configured in a generated header, but for now we can just set it correctly.
<rdar://problem/33900552>
llvm-svn: 312666
The socket bind address should either be localhost or anyaddress. This bug in the listen behavior was preventing lldb-server from opening sockets for non-localhost connections.
The added test verifies that opening an anyaddress socket works and has a non-zero port assignment.
This should resolve PR34183.
llvm-svn: 312008
The Process/gdb-remote test now requires the LLVMTestingSupport library
that is not installed by LLVM. As a result, when doing an out-of-source
build it fails being unable to find the library. To solve that, build
a local copy of the library when building LLDB with unittests and LLVM
sources available. This is based on how we deal with bundled gtest
sources.
Differential Revision: https://reviews.llvm.org/D36886
llvm-svn: 311355
Summary:
The EncodingError test ensures that trying to encode a multibyte wchar
with a given codepage fails. If setlocale() fails, the encoding is
performed using the current locale, which may or may not fail.
This patch asserts that both setlocale() operations are successful, as
well as falling back to a widely available unibyte encoding for
non-Windows systems.
<rdar://problem/33782806>
Reviewers: zturner, labath, lhames
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D36496
llvm-svn: 310499
While adding IPv6 support to debugserver I broke handling wildcard addresses and fully qualified address filtering. This patch resolves that bug and adds a test for matching the address "*".
<rdar://problem/32947613>
llvm-svn: 307957
blocks of memory, and if the final bytes of that block look like a long
x86 instruction, it can cause the llvm disassembler to read past the end
of the buffer. Use the maximum allowed instruction length that we pass
to the llvm disassembler as a way to limit this to the size of the buffer.
An example of how to trigger this is when lldb does a function call, it
puts a breakpoint on the beginning of main() and uses that as the return
address from the function call. When we stop at that location, lldb may
try to find the first frame up the stack. Because this is on the first
instruction of a function, it will get the word-size value at the stack
pointer and assume that this was the caller's pc value. But this is random
stack memory and could point to anything - an object in memory, something
in the data section, whatever. And if we have a symbol for that thing,
we'll try to disassemble it.
This was leading to infrequent crashes in customer scenarios; figured out
what was happening with address sanitizer.
<rdar://problem/30463256>
llvm-svn: 307454
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
Fetching an input file required about five lines of code, and this was
repeated in multiple unit tests, with slight variations. Add a helper
function for doing that into the lldbUtilityMocks module (which I rename
to lldbUtilityHelpers to commemorate the fact it includes more than
mocks)
Reviewers: zturner, eugene
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34683
llvm-svn: 306668
Summary:
The instruction pattern:
and $-16, %esp
sub $imm, %esp
...
lea imm(%ebp), %esp
appears when the compiler is realigning the stack (for example in
main(), or almost everywhere with -mstackrealign switch). The "and"
instruction is very difficult to model, but that's not necessary, as
these frames are always %ebp-based (the compiler also needs a way to
restore the original %esp). Therefore the plans we were generating for
these function were almost correct already. The only place we were doing
it wrong were the last instructions of the epilogue (usually just
"ret"), where we had to revert to %esp-based unwinding, as the %ebp had
been popped already.
This was wrong because our "distance of esp from cfa" counter had picked
up the "sub" instruction (and incremented the counter) but it had not
seen that the register was reset by the "lea" instruction.
This patch fixes that shortcoming, and adds a test for handling
functions like this.
I have not been able to tickle the compiler into producing a 64-bit
function with this pattern, but I don't see a reason why it couldn't
produce it, if it chose to, so I add a x86_64 test as well.
Reviewers: jasonmolenda, tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34750
llvm-svn: 306666
Summary:
instead of using a boolean to differentiate between the two section
types, use an enum to make the intent clearer.
I also remove the RegisterKind argument from the constructor, as this
can be deduced from the Type argument.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34681
llvm-svn: 306521
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
This is a beefed-up version of D33504, which adds support for dwarf 4
debug_frame section format.
The main difference here is that the decision whether to use eh_frame or
debug_frame is done on a per-function basis instead of per-object file.
This is necessary because one module can contain both sections (for
example, the start files added by the linker will typically pull in
eh_frame), but we want to be able to access both, for maximum
information.
I also add unit test for parsing various CFI formats (eh_frame,
debug_frame v3 and debug_frame v4).
Reviewers: jasonmolenda, clayborg
Subscribers: mgorny, aprantl, abidh, lldb-commits, tatyana-krasnukha
Differential Revision: https://reviews.llvm.org/D34613
llvm-svn: 306397
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Instead of every test creating a client-server combo, do that in the
SetUp method of the test fixture. This also means that we can rely on
gtest to not run the test if the SetUp method fails and delete the
if(HasFailure) calls.
llvm-svn: 306013
Summary:
A number of places were trying to decode the result of wait(). Add a simple
utility function that does that and a struct that encapsulates the
decoded result. Then also provide a pretty-printer for that class.
Reviewers: zturner, krytarowski, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33998
llvm-svn: 305689
Summary:
ProcessLauncherPosix was using posix_spawn for launching the process,
but this function is not available on all platforms we support, and even
where it was avaialable, it did not support the full range of options we
require for launching (most importantly, launching in stop-on-entry
mode). For these reasons, the set of ifdefs around these functions has
grown untractably large, and we were forced to implement our own
launcher from more basic primitives anyway (ProcessLauncherPosixFork --
used on Linux, Android, and NetBSD).
Therefore, I remove this class, and move the relevant parts of the code
to the darwin-specific Host.mm file. This is the platform that code was
originally written for anyway, and it's the only platform where this
implementation makes sense (e.g. the lack of the "thread-specific
working directory" concept makes these functions racy on all other
platforms). This allows us to remove a lot of ifdefs and simplify the
code.
Effectively, the only change this introduces is that FreeBSD will now
use the fork-based launcher instead of posix_spawnp. That sholdn't be a
problem as this approach works at least on one other BSD-based system
already.
Reviewers: krytarowski, emaste, jingham
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34236
llvm-svn: 305686
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Summary:
This is a new C++ test framework based on Google Test, and one working
example test.
The intention is to replace the existing tests in
packages/Python/lldbsuite/test/tools/lldb-server/ with this suite
and use this framework for all new client server tests.
Reviewers: labath, beanz
Reviewed By: labath, beanz
Subscribers: beanz, emaste, zturner, tberghammer, takuto.ikuta, krytarowski, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D32930
Patch by Jason Majors <jmajors@google.com>
llvm-svn: 304793
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
Summary:
This adds functions to convert between llvm::Error and Status classes.
Posix errors in Status are represented as llvm::ECError, and the rest as
llvm::StringError.
For the conversion from Error to Status, ECError is again represented as
a posix error in Status, while other errors are stored as generic errors
and only the string value is preserved.
Reviewers: zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33241
llvm-svn: 303348
The Timer destructor would grab a global mutex in order to update
execution time. Add a class to define a category once, statically; the
class adds itself to an atomic singly linked list, and thus subsequent
updates only need to use an atomic rather than grab a lock and perform a
hashtable lookup.
Differential Revision: https://reviews.llvm.org/D32823
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 303058
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
Many parallel tasks just want to iterate over all the possible numbers from 0 to N-1. Rather than enqueue N work items, instead just "map" the function across the requested integer space.
Reviewers: clayborg, labath, tberghammer, zturner
Reviewed By: clayborg, zturner
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D32757
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 302223
Summary:
This adds a couple of unit tests to the MainLoop class. To get the
kqueue based version of the signal handling passing, I needed to
modify the implementation a bit to make the queue object persistent.
Otherwise, only the signals which are send during the Run call would get
processed, which did not match the ppoll behaviour.
I also took the opportunity to remove the ForEach template functions and
replace them with something more reasonable.
Reviewers: beanz, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D32753
llvm-svn: 302133
Summary:
If we have symbol information in a separate file, we need to be very
careful about presenting a unified section view of module to the rest of
the debugger. ObjectFileELF had code to handle that, but it was being
overly cautious -- the section->GetFileSize()!=0 meant that the
unification would fail for sections which do not occupy any space in the
object file (e.g., .bss). In my case, that manifested itself as not
being able to display the values of .bss variables properly as the
section associated with the variable did not have it's load address set
(because it was not present in the unified section list).
I test this by making sure the unified section list and the variables
refer to the same section.
Reviewers: eugene, zturner
Subscribers: tberghammer, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D32434
llvm-svn: 301917
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
Summary:
the reason for this is two-fold:
- getaddrinfo without the extra arguments will return the same
(network-level) address multiple times, once for each supported
transport protocol, which is not what is usually intended (it certainly
wasn't in D31823)
- it enables us to rewrite the getaddrinfo member function in terms of
the static GetAddressInfo function.
Reviewers: beanz, tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32357
llvm-svn: 301168
Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary: This patch adds IPv6 support to debugserver. It follows a similar pattern to the changes proposed for LLDB/Host except that the listen implementation is only with kqueue(2) because debugserver is only supported on Darwin.
Reviewers: jingham, jasonmolenda, clayborg
Reviewed By: clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31824
llvm-svn: 300580
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
Summary:
This patch refactors the CMake build system's support for building debugserver to allow us to build the majority of debugserver's sources into the debugserverCommon library which can then be reused by unit tests.
The first unit test I've written tests debug server's ability to accept incoming connections from LLDB. The test forks the process, and one side creates a listening socket using debugserver's socket API, the other side creates a transmitting socket using LLDB's TCPSocket class.
I have no clue where to even start getting this connected into the LLDB Xcode project, so for now these tests are CMake-only.
Reviewers: zturner, labath, jasonmolenda
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31357
llvm-svn: 300111
Current implementation of CPlusPlusLanguage::MethodName::Parse() doesn't
get anywhere close to covering full extent of possible function declarations.
It causes incorrect behavior in avoid-stepping and sometimes messes
printing of thread backtrace.
This change implements more methodical parsing logic based on clang
lexer and simple recursive parser.
Examples:
void std::vector<Class, std::allocator<Class>>::_M_emplace_back_aux<Class const&>(Class const&)
void (*&std::_Any_data::_M_access<void (*)()>())()
Previous version of this change (D31451) was rolled back due to an issue
with Objective-C selectors being incorrectly recognized as a C++ identifier.
Differential Revision: https://reviews.llvm.org/D31451
llvm-svn: 299721
This caused a failure in the test case:
functionalities/breakpoint/objc/TestObjCBreakpoints.py
When we are parsing up names we stick interesting parts of the names
in various buckets, one of which is the ObjC selector bucket. The new
C++ name parser must be interfering with this process somehow.
<rdar://problem/31439305>
llvm-svn: 299489
Current implementation of CPlusPlusLanguage::MethodName::Parse() doesn't
get anywhere close to covering full extent of possible function declarations.
It causes incorrect behavior in avoid-stepping and sometimes messes
printing of thread backtrace.
This change implements more methodical parsing logic based on clang
lexer and simple recursive parser.
Examples:
void std::vector<Class, std::allocator<Class>>::_M_emplace_back_aux<Class const&>(Class const&)
void (*&std::_Any_data::_M_access<void (*)()>())()
Differential Revision: https://reviews.llvm.org/D31451
llvm-svn: 299374
Summary:
This aims to verify the validity of the response from the debugging
server in GDBRemoteCommunicationClient::GetMemoryRegionInfo. I was
working with ds2 (https://github.com/facebook/ds2) and encountered a bug
that caused the server's response to have a 'size' value of 0, which
caused lldb to behave incorrectly.
Reviewers: k8stone, labath, clayborg
Reviewed By: labath, clayborg
Subscribers: clayborg, sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D31485
Change by Alex Langford <apl@fb.com>
llvm-svn: 299239
GetNormalizedPath seems to be slow, so it's worth
shortcutting it if possible. This change does so
when the filenames and not equal and we can tell
GetNormalizedPath would not make them equal.
Also added a test for "." final component since that
was missing.
llvm-svn: 298876
This was causing a test failure in one of LLDB's tests which
specifically dealt with a limitation in LLVM's implementation
of home_directory() that LLDB's own implementation had worked
around.
This limitation has been addressed in r298513 on the LLVM side,
so the failing test (which is now unnecessary as the limitation
no longer exists) was removed in r298519, allowing this patch to
be re-submitted without modification.
llvm-svn: 298526
Summary:
ProcFileReader is the cause of the dependency from Host to ProcessLinux
module. Since it's interface is also obsolete (ReadIntoDataBuffer is
trivially replaceable by llvm::MemoryBuffer functions and
ProcessLineByLine is trivially implementable with StringRefs), instead
of moving it around I'm planning to obliterate it. This is the first
step, where I remove a couple of occurences in linux/Host.cpp, and
modernize some code around that.
I have introduced linux/Support.h, which holds two utility functions
now, whose resposibility is to construct the appropriate proc file names
-- the only useful feature of ProcFileReader.
I add a couple of tests for these functions, and for
Host::GetProcessInfo. It's worth noting that these are the first
host-specific unit tests in lldb.
Reviewers: zturner, eugene
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30942
llvm-svn: 297843
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
One of the file name templates was occasionally generating the name
"fooa***", which conflicted with the one of the tests expectation that
there is only one item beginning with "fooa".
There doesn't seem to be a good reason for using random file templates
here, so just switch to a fixed set of files to increase
reproducibility.
llvm-svn: 297743
This reverts commit a6a29374662716710f80c8ece96629751697841e.
It has a few compilation failures that I don't have time to fix
at the moment.
llvm-svn: 297589
There were a couple of problems with this function on Windows. Different
separators and differences in how tilde expressions are resolved for
starters, but in addition there was no clear indication of what the
function's inputs or outputs were supposed to be, and there were no tests
to demonstrate its use.
To more easily paper over the differences between Windows paths,
non-Windows paths, and tilde expressions, I've ported this function to use
LLVM-based directory iteration (in fact, I would like to eliminate all of
LLDB's directory iteration code entirely since LLVM's is cleaner / more
efficient (i.e. it invokes fewer stat calls)). and llvm's portable path
manipulation library.
Since file and directory completion assumes you are referring to files and
directories on your local machine, it's safe to assume the path syntax
properties of the host in doing so, so LLVM's APIs are perfect for this.
I've also added a fairly robust set of unit tests. Since you can't really
predict what users will be on your machine, or what their home directories
will be, I added an interface called TildeExpressionResolver, and in the
unit test I've mocked up a fake implementation that acts like a unix
password database. This allows us to configure some fake users and home
directories in the test, so we can exercise all of those hard-to-test
codepaths that normally otherwise depend on the host.
Differential Revision: https://reviews.llvm.org/D30789
llvm-svn: 297585
Summary:
This fixes two threading issues in the logging code. The access to the
mask and options flags had data races when we were trying to
enable/disable logging while another thread was writing to the log.
Since we can log from almost any context, and we want it to be fast, so
I avoided locking primitives and used atomic variables instead. I have
also removed the (unused) setters for the mask and flags to make sure
that the only way to set them is through the enable/disable channel
functions.
I also add tests, which when run under tsan, verify that the use cases
like "doing an LLDB_LOGV while another thread disables logging" are
data-race-free.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30702
llvm-svn: 297368
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
it was accessing the details of the Log class directly. Let it go
through the channel class instead.
This also discovered a bug when we were setting but not clearing the log
options when enabling a channel.
llvm-svn: 297053
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Prior to MSVC 2015 we had to manually include this header any
time we were going to include <thread> or <future> due to a
bug in MSVC's STL implementation. This has been fixed in MSVC
for some time now, and we require VS 2015 minimum, so we can
remove this across all subprojects.
llvm-svn: 296906
Summary:
Use StringRef and ArrayRef where possible. This adds an accessor to the
Args class to get a view of the arguments as ArrayRef<const char *>.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30402
llvm-svn: 296592
load_size should be 64-bit unconditionally to match the underlying API.
This makes sure the MAX value correctly signals to auto-detect the file
size when mmap()ing.
llvm-svn: 296334
The channel refactor introduced a regression where we were not honoring
the log options passed when enabling the channel. Fix that and add a
test.
llvm-svn: 296329
After a series of patches on the LLVM side to get the mmaping
code up to compatibility with LLDB's needs, it is now ready
to go, which means LLDB's custom mmapping code is redundant.
So this patch deletes it all and uses LLVM's code instead.
In the future, we could take this one step further and delete
even the lldb DataBuffer base class and rely entirely on
LLVM's facilities, but this is a job for another day.
Differential Revision: https://reviews.llvm.org/D30054
llvm-svn: 296159
Summary:
The code was attempting to copy the shared pointer member in order to
guarantee atomicity, but this is not enough. Instead, protect the
pointer with a proper read-write mutex.
This bug was present here for a long time, but my recent refactors must
have altered the timings slightly, such that now this fails fairly often
when running the tests: the test runner runs the "log disable" command
just as the thread monitoring the lldb-server child is about to report
that the server has exited.
I add a test case for this. It's not possible to reproduce the race
deterministically in normal circumstances, but I have verified that
before the fix, the test failed when run under tsan, and was running
fine afterwards.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30168
llvm-svn: 295712
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
The way of injecting an error into the printf call was not working on
darwin - the C library still happily format the character. It only
returns an error after we use a wide character that does not fit into a
single byte, so switch the test to use that.
llvm-svn: 295443
Changes wrt. previous version:
- add #include <atomic>: fix build on windows
- add extra {} around the string literals used to initialize
llvm::StringLiteral: fix gcc build
llvm-svn: 295442
Shafik Yaghmour