* `RelocationBaseSection::addReloc` increases `numRelativeRelocs`, which
duplicates the work done by RelocationSection<ELFT>::writeTo.
* --pack-dyn-relocs=android has inappropropriate DT_RELACOUNT.
AndroidPackedRelocationSection does not necessarily place relative relocations
in the front and DT_RELACOUNT might cause semantics error (though our
implementation doesn't and Android bionic doesn't use DT_RELACOUNT anyway.)
Move `llvm::partition` to a new function `partitionRels` and compute
`numRelativeRelocs` there. Now `RelocationBaseSection::addReloc` is trivial and
can be moved to the header to enable inlining.
The rest of DynamicReloc and `-z combreloc` handling is moved to the
non-template `RelocationBaseSection::computeRels` to decrease code size. My
x86-64 lld executable is 44+KiB smaller.
While here, rename `sort` to `combreloc`.
We only support both TLSDESC and TLS GD for x86 so this is an x86-specific
problem. If both are used, only one R_X86_64_TLSDESC is produced and TLS GD
accesses will incorrectly reference R_X86_64_TLSDESC. Fix this by introducing
SymbolAux::tlsDescIdx.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D116900
and remove associated make<XXX> calls.
gnuHash and sysvHash are unchanged, otherwise LinkerScript::discard would
destroy the objects which may be referenced by input section descriptions.
My x86-64 lld executable is 121+KiB smaller.
When linking a 1.2G output (nearly no debug info, 2846621 dynamic relocations) using `--threads=8`, I measured
```
9.131462 Total ExecuteLinker
1.449913 Total Write output file
1.445784 Total Write sections
0.657152 Write sections {"detail":".rela.dyn"}
```
This change decreases the .rela.dyn time to 0.25, leading to 4% speed up in the total time.
* The parallelSort is slow because of expensive r_sym/r_offset computation. Cache the values.
* The iteration is slow. Move r_sym/r_addend computation ahead of time and parallelize it.
With the change, the new encodeDynamicReloc is cheap (0.05s). So no need to parallelize it.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D115993
This decreases struct sizes and usually decreases the lld executable
size (39KiB for my x86-64 executable) (unless in some cases smaller
SmallVector leads to more inlining, e.g. StringTableBuilder).
For --gdb-index, there may be memory usage saving.
Only called once. Moving to OutputSections.cpp can make it inlined.
finalizeInputSections can be very hot, especially in -O1 links with much debug info.
Since D100490 this case is diagnosed for -z rel. This commit implements
R_AARCH64_TLSDESC cases for AArch64::getImplicitAddend() and
AArch64::relocate(). However, there are probably further relocation types
that need to be handled for full support of -z rel.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47009
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100544
There used to be many cases where addends for Elf_Rel were not emitted in
the final object file (mostly when building for MIPS64 since the input .o
files use RELA but the output uses REL). These cases have been fixed since,
but this patch adds a check to ensure that the written values are correct.
It is based on a previous patch that I added to the CHERI fork of LLD since
we were using MIPS64 as a baseline. The work has now almost entirely
shifted to RISC-V and Arm Morello (which use Elf_Rela), but I thought
it would be useful to upstream our local changes anyway.
This patch adds a (hidden) command line flag --check-dynamic-relocations
that can be used to enable these checks. It is also on by default in
assertions builds for targets that handle all dynamic relocations kinds
that LLD can emit in Target::getImplicitAddend(). Currently this is
enabled for ARM, MIPS, and I386.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101450
This patch changes the DynamicReloc class to store an enum instead
of the overloaded useSymVA member to make it easier to understand
and fix incorrect addends being written in some corner cases. The
change is motivated by a follow-up review that checks the value of
implicit Elf_Rel addends written to the output file.
This patch fixes an incorrect output when using `-z rela` for i386 files
with R_386_GOT32 relocations (not that this really matters since it's an
unsupported configuration).
Storing the relocation expression kind also addresses an incorrect addend
FIXME in ppc64-abs64-dyn.s introduced in D63383.
DynamicReloc now also has a special case for the MIPS TLS relocations
(DynamicReloc::AgainstSymbolWithTargetVA) since the
R_MIPS_TLS_TPREL{32/64} the symbol VA to the GOT for preemptible
symbols. I'm not sure if the symbol value actually should be written
for R_MIPS_TLS_TPREL32, but this patch does not attempt to change
that behaviour.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100490
We can reduce the number of "using" declarations.
`LLVM_ELF_IMPORT_TYPES_ELFT` was extended in D93801.
Differential revision: https://reviews.llvm.org/D93856
Currently we treat SHT_RISCV_ATTRIBUTES like a normal section and
concatenate all such input sections, yielding invalid output unless only
a single attributes section is present in the input. Instead, pick the
first as with SHT_ARM_ATTRIBUTES. We do not currently need to condition
our behaviour on the contents, unlike Arm. In future, we should both do
stricter validation of the input and merge all sections together to
ensure we have, for example, the full arch string requirement, but this
rudimentary implementation is good enough for most common cases.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D86309
Fix PR36272 and PR46835
A .eh_frame FDE references a text section and (optionally) a LSDA (in
.gcc_except_table). Even if two text sections have identical content and
relocations (e.g. a() and b()), we cannot fold them if their LSDA are different.
```
void foo();
void a() {
try { foo(); } catch (int) { }
}
void b() {
try { foo(); } catch (float) { }
}
```
Scan .eh_frame pieces with LSDA and disallow referenced text sections to be
folded. If two .gcc_except_table have identical semantics (usually identical
content with PC-relative encoding), we will lose folding opportunity.
For ClickHouse (an exception-heavy application), this can reduce --icf=all efficiency
from 9% to 5%. There may be some percentage we can reclaim without affecting
correctness, if we analyze .eh_frame and .gcc_except_table sections.
gold 2.24 implemented a more complex fix (resolution to
https://sourceware.org/bugzilla/show_bug.cgi?id=21066) which combines the
checksum of .eh_frame CIE/FDE pieces.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84610
Fixed error detected by msan. The size field of the .ARM.exidx synthetic
section needs to be initialized to at least estimation level before
calling assignAddresses as that will use the size field.
This was previously reverted in 1ca16fc4f5.
Differential Revision: https://reviews.llvm.org/D78422
-fno-pie produces a pair of non-GOT-non-PLT relocations R_PPC_ADDR16_{HA,LO} (R_ABS) referencing external
functions.
```
lis 3, func@ha
la 3, func@l(3)
```
In a -no-pie/-pie link, if func is not defined in the executable, a canonical PLT entry (st_value>0, st_shndx=0) will be needed.
References to func in shared objects will be resolved to this address.
-fno-pie -pie should fail with "can't create dynamic relocation ... against ...", so we just need to think about -no-pie.
On x86, the PLT entry passes the JMP_SLOT offset to the rtld PLT resolver.
On x86-64: the PLT entry passes the JUMP_SLOT index to the rtld PLT resolver.
On ARM/AArch64: the PLT entry passes &.got.plt[n]. The PLT header passes &.got.plt[fixed-index]. The rtld PLT resolver can compute the JUMP_SLOT index from the two addresses.
For these targets, the canonical PLT entry can just reuse the regular PLT entry (in PltSection).
On PPC32: PltSection (.glink) consists of `b PLTresolve` instructions and `PLTresolve`. The rtld PLT resolver depends on r11 having been set up to the .plt (GotPltSection) entry.
On PPC64 ELFv2: PltSection (.glink) consists of `__glink_PLTresolve` and `bl __glink_PLTresolve`. The rtld PLT resolver depends on r12 having been set up to the .plt (GotPltSection) entry.
We cannot reuse a `b PLTresolve`/`bl __glink_PLTresolve` in PltSection as a canonical PLT entry. PPC64 ELFv2 avoids the problem by using TOC for any external reference, even in non-pic code, so the canonical PLT entry scenario should not happen in the first place.
For PPC32, we have to create a PLT call stub as the canonical PLT entry. The code sequence sets up r11.
Reviewed By: Bdragon28
Differential Revision: https://reviews.llvm.org/D73399
In D71281 a fix was put in to round up the size of a ThunkSection to the
nearest 4KiB when performing errata patching. This fixed a problem with a
very large instrumented program that had thunks and patches mutually
trigger each other. Unfortunately it triggers an assertion failure in an
AArch64 allyesconfig build of the kernel. There is a specific assertion
preventing an InputSectionDescription being larger than 4KiB. This will
always trigger if there is at least one Thunk needed in that
InputSectionDescription, which is possible for an allyesconfig build.
Abstractly the problem case is:
.text : {
*(.text) ;
...
. = ALIGN(SZ_4K);
__idmap_text_start = .;
*(.idmap.text)
__idmap_text_end = .;
...
}
The assertion checks that __idmap_text_end - __idmap_start is < 4 KiB.
Note that there is more than one InputSectionDescription in the
OutputSection so we can't just restrict the fix to OutputSections smaller
than 4 KiB.
The fix presented here limits the D71281 to InputSectionDescriptions that
meet the following conditions:
1.) The OutputSection is bigger than the thunkSectionSpacing so adding
thunks will affect the addresses of following code.
2.) The InputSectionDescription is larger than 4 KiB. This will prevent
any assertion failures that an InputSectionDescription is < 4 KiB
in size.
We do this at ThunkSection creation time as at this point we know that
the addresses are stable and up to date prior to adding the thunks as
assignAddresses() will have been called immediately prior to thunk
generation.
The fix reverts the two tests affected by D71281 to their original state
as they no longer need the 4KiB size roundup. I've added simpler tests to
check for D71281 when the OutputSection size is larger than the ThunkSection
spacing.
Fixes https://github.com/ClangBuiltLinux/linux/issues/812
Differential Revision: https://reviews.llvm.org/D72344
This patch is a joint work by Rui Ueyama and me based on D58102 by Xiang Zhang.
It adds Intel CET (Control-flow Enforcement Technology) support to lld.
The implementation follows the draft version of psABI which you can
download from https://github.com/hjl-tools/x86-psABI/wiki/X86-psABI.
CET introduces a new restriction on indirect jump instructions so that
you can limit the places to which you can jump to using indirect jumps.
In order to use the feature, you need to compile source files with
-fcf-protection=full.
* IBT is enabled if all input files are compiled with the flag. To force enabling ibt, pass -z force-ibt.
* SHSTK is enabled if all input files are compiled with the flag, or if -z shstk is specified.
IBT-enabled executables/shared objects have two PLT sections, ".plt" and
".plt.sec". For the details as to why we have two sections, please read
the comments.
Reviewed By: xiangzhangllvm
Differential Revision: https://reviews.llvm.org/D59780
PltSection is used by both PLT and IPLT. The PLT section may have a
header while the IPLT section does not. Split off IpltSection from
PltSection to be clearer.
Unlike other targets, PPC64 cannot use the same code sequence for PLT
and IPLT. This helps make a future PPC64 patch (D71509) more isolated.
On EM_386 and EM_X86_64, when PLT is empty while IPLT is not, currently
we are inconsistent whether the PLT header is conceptually attached to
in.plt or in.iplt . Consistently attach the header to in.plt can make
the -z retpolineplt logic simpler. It also makes `jmp` point to an
aesthetically better place for non-retpolineplt cases.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71519
On some edge cases such as Chromium compiled with full instrumentation we
have a .text section over twice the size of the maximum branch range and
the instrumented code generation containing many examples of the erratum
sequence. The combination of Thunks and many erratum sequences causes
finalizeAddressDependentContent() to not converge. We end up with:
start
- Thunk Creation (disturbs addresses after thunks, creating more patches)
- Patch Creation (disturbs addresses after patches, creating more thunks)
- goto start
In most images with few thunks and patches the mutual disturbance does not
cause convergence problems. As the .text size and number of patches go up
the risk increases.
A way to prevent the thunk creation from interfering with patch creation is
to round up the size of the thunks to a 4KiB boundary when the
erratum patch is enabled. As the erratum sequence only triggers when an
instruction sequence starts at 0xff8 or 0xffc modulo (4 KiB) by making the
thunks not affect addresses modulo (4 KiB) we prevent thunks from
interfering with the patch.
The patches themselves could be aggregated in the same way that Thunks are
within ThunkSections and we could round up the size in the same way. This
would reduce the number of patches created in a .text section size >
128 MiB but would not likely help convergence problems.
Differential Revision: https://reviews.llvm.org/D71281
fixes (remaining part of) pr44071, other part in D71242
Fixes PPC64 part of PR40438
// clang -target ppc64le -c a.cc
// .text.unlikely may be placed in a separate output section (via -z keep-text-section-prefix)
// The distance between bar in .text.unlikely and foo in .text may be larger than 32MiB.
static void foo() {}
__attribute__((section(".text.unlikely"))) static int bar() { foo(); return 0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for PPC64.
AArch64: .text -> `__AArch64ADRPThunk_ (adrp x16, ...; add x16, x16, ...; br x16)` -> target
PPC64: .text -> `__long_branch_ (addis 12, 2, ...; ld 12, ...(12); mtctr 12; bctr)` -> target
AArch64 can leverage ADRP to jump to the target directly, but PPC64
needs to load an address from .branch_lt . Before Power ISA v3.0, the
PC-relative ADDPCIS was not available. .branch_lt was invented to work
around the limitation.
Symbol::ppc64BranchltIndex is replaced by
PPC64LongBranchTargetSection::entry_index which take addends into
consideration.
The tests are rewritten: ppc64-long-branch.s tests -no-pie and
ppc64-long-branch-pi.s tests -pie and -shared.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D70937
When /DISCARD/ is used on an input section, that input section may have
a .ARM.exidx metadata section that depends on it. As the discard handling
comes after the .ARM.exidx synthetic section is created we need to make
sure that we account for the case where the .ARM.exidx output section
should be removed because there are no more live input sections.
Differential Revision: https://reviews.llvm.org/D67848
llvm-svn: 372781
Fixes PR38748
mergeSections() calls getOutputSectionName() to get output section
names. Two MergeInputSections may be merged even if they are made
different by SECTIONS commands.
This patch moves mergeSections() after processSectionCommands() and
addOrphanSections() to fix the issue. The new pass is renamed to
OutputSection::finalizeInputSections().
processSectionCommands() and addorphanSections() are changed to add
sections to InputSectionDescription::sectionBases.
finalizeInputSections() merges MergeInputSections and migrates
`sectionBases` to `sections`.
For the -r case, we drop an optimization that tries keeping sh_entsize
non-zero. This is for the simplicity of addOrphanSections(). The
updated merge-entsize2.s reflects the change.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67504
llvm-svn: 372734
This essentially reverts the code change of D63132 and switches to a simpler approach.
In an executable/shared object, st_shndx of a symbol can be:
1) SHN_UNDEF: undefined symbol (or canonical PLT)
2) SHN_ABS: absolute symbol
3) any other value (usually a regular section index) represents a relative symbol.
The actual value does not matter.
Many ld.so (musl, all archs except MIPS of FreeBSD rtld-elf) even treat 2) and 3)
the same. If .sdata does not exist, it does not matter what value/section
__global_pointer$ has, as long as it is relative (otherwise there will be a pedantic
lld error. See D63132). Just set the st_shndx arbitrarily to 1.
Dummy st_shndx=1 may be used by __rela_iplt_start, linker-script-defined symbols outside a section, __dso_handle, etc.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66798
llvm-svn: 370172
EhFrameSection::addSection checks liveness of FDE early. This makes it
infeasible to move combineEhSections() before ICF.
Postpone the check to EhFrameSection::finalizeContents(). This is what
ARMExidxSyntheticSection does and it will make a subsequent patch D66717
simpler.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66727
llvm-svn: 369890
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
If .sdata is absent, linker synthesized __global_pointer$ gets a section index of SHN_ABS.
(ld.bfd has a similar issue: binutils PR24678)
Scrt1.o may use `lla gp, __global_pointer$` to reference the symbol PC
relatively. In -pie/-shared mode, lld complains if a PC relative
relocation references an absolute symbol (SHN_ABS) but ld.bfd doesn't:
ld.lld: error: relocation R_RISCV_PCREL_HI20 cannot refer to lute symbol: __global_pointer$
Let the reference of __global_pointer$ to force creation of .sdata to
fix the problem. This is similar to _GLOBAL_OFFSET_TABLE_, which forces
creation of .got or .got.plt .
Also, change the visibility from STV_HIDDEN to STV_DEFAULT and don't
define the symbol for -shared. This matches ld.bfd, though I don't
understand why it uses STV_DEFAULT.
Reviewed By: ruiu, jrtc27
Differential Revision: https://reviews.llvm.org/D63132
llvm-svn: 363351
We create several types of synthetic sections for loadable partitions, including:
- The dynamic symbol table. This allows code outside of the loadable partitions
to find entry points with dlsym.
- Creating a dynamic symbol table also requires the creation of several other
synthetic sections for the partition, such as the dynamic table and hash table
sections.
- The partition's ELF header is represented as a synthetic section in the
combined output file, and will be used by llvm-objcopy to extract partitions.
Differential Revision: https://reviews.llvm.org/D62350
llvm-svn: 362819
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
Fangrui Song