Normally, if any registers are spilled, we prefer to spill lr on Thumb1
so we can fold the "bx lr" into the "pop". However, if there are tail
calls involved, restoring lr is expensive, so skip the optimization in
that case.
The spill of r7 in the new test also isn't necessary, but that's
mostly orthogonal to this patch. (It's the same code in
ARMFrameLowering, but it's not related to tail calls.)
Differential Revision: https://reviews.llvm.org/D49459
llvm-svn: 339283
ld64 supplies its own Thumb bit for Thumb functions, and intentionally zeroes
out that part of any addend in an object file. But it only does that for
symbols marked N_EXT -- i.e. external symbols. So LLVM should avoid setting
that extra bit in other cases.
llvm-svn: 339007
Disable ARMCodeGenPrepare by default again. It is causing verifier
failues in V8 that look like:
Duplicate integer as switch case
switch i32 %trunc, label %if.end13 [
i32 0, label %cleanup36
i32 0, label %if.then8
], !dbg !4981
i32 0
fatal error: error in backend: Broken function found, compilation aborted!
I will continue reducing the test case and send it along.
llvm-svn: 338452
Contrary to ELF, we don't add any markers that distinguish data generated
with .short/.long from normal instructions, so the .inst directive only
adds compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49936
llvm-svn: 338356
Code in `CC_ARM_AAPCS_Custom_Aggregate()` is responsible for handling
homogeneous aggregates for `CC_ARM_AAPCS_VFP`. When an aggregate ends up
fully on stack, the function tries to pack all resulting items of the
aggregate as tightly as possible according to AAPCS.
Once the first item was laid out, the alignment used for consecutive
items was the size of one item. This logic went wrong for 128-bit
vectors because their alignment is normally only 64 bits, and so could
result in inserting unexpected padding between the first and second
element.
The patch fixes the problem by updating the alignment with the item size
only if this results in reducing it.
Differential Revision: https://reviews.llvm.org/D49720
llvm-svn: 338233
This feature enables the fusion of such operations on Cortex A57 and Cortex
A72, as recommended in their Software Optimisation Guides, sections 4.14 and
4.11, respectively.
Differential revision: https://reviews.llvm.org/D49563
llvm-svn: 338147
In SVN r334523, the first half of comdat constant pool handling was
hoisted from X86WindowsTargetObjectFile (which despite the name only
was used for msvc targets) into the arch independent
TargetLoweringObjectFileCOFF, but the other half of the handling was
left behind in X86AsmPrinter::GetCPISymbol.
With only half of the handling in place, inconsistent comdat
sections/symbols are created, causing issues with both GNU binutils
(avoided for X86 in SVN r335918) and with the MS linker, which
would complain like this:
fatal error LNK1143: invalid or corrupt file: no symbol for COMDAT section 0x4
Differential Revision: https://reviews.llvm.org/D49644
llvm-svn: 337950
Saves materializing the immediate for the "ands".
Corresponding patterns exist for lsrs+lsls, but that seems less common
in practice.
Now implemented as a DAGCombine.
Differential Revision: https://reviews.llvm.org/D49585
llvm-svn: 337945
ARM Stage 2 builders have been suspiciously broken since the pass was
committed. Disabling to hopefully fix the bots and give me time to
debug.
llvm-svn: 337821
Summary:
OpChain has subclasses, so add a virtual destructor.
This fixes an issue when deleting subclasses of OpChain (see MatchSMLAD() specifically) in r337701.
Reviewers: javed.absar
Subscribers: llvm-commits, SjoerdMeijer, samparker
Differential Revision: https://reviews.llvm.org/D49681
llvm-svn: 337713
In preparing to allow ARMParallelDSP pass to parallelise more than
smlads, I've restructed some elements:
- The ParallelMAC struct has been renamed to BinOpChain.
- The BinOpChain struct holds two value lists: LHS and RHS, as well
as inheriting from the OpChain base class.
- The OpChain struct holds all the values of the represented chain
and has had the memory locations functionality inserted into it.
- ParallelMACList becomes OpChainList and it now holds pointers
instead of objects.
Differential Revision: https://reviews.llvm.org/D49020
llvm-svn: 337701
Arm specific codegen prepare is implemented to perform type promotion
on icmp operands, which can enable the removal of uxtb and uxth
(unsigned extend) instructions. This is possible because performing
type promotion before ISel alleviates this duty from the DAG builder
which has to perform legalisation, but has a limited view on data
ranges.
The pass visits any instruction operand of an icmp and creates a
worklist to traverse the use-def tree to determine whether the values
can simply be promoted. Our concern is values in the registers
overflowing the narrow (i8, i16) data range, so instructions marked
with nuw can be promoted easily. For add and sub instructions, we are
able to use the parallel dsp instructions to operate on scalar data
types and avoid overflowing bits. Underflowing adds and subs are also
permitted when the result is only used by an unsigned icmp.
Differential Revision: https://reviews.llvm.org/D48832
llvm-svn: 337687
Enable the optimization of operations on DPR and SPR via a feature instead
of checking the target.
Differential revision: https://reviews.llvm.org/D49463
llvm-svn: 337575
We were emitting incorrect calls to libm functions that LLVM had decided it
knew about because the default is soft-float.
Recommitted without breaking ELF this time.
llvm-svn: 337450
ARMSubtarget had a copy/pasted block to determine whether the target was
hard-float, but it just delegated to triple features anyway so it's better at
the TargetMachine level.
llvm-svn: 337384
This fixes an issue that we were not properly supporting multiple reduction
stmts in a loop, and not generating SMLADs for these cases. The alias analysis
checks were done too early, making it too conservative.
Differential revision: https://reviews.llvm.org/D49125
llvm-svn: 336795
The original code attempted to do this, but the std::abs() call didn't
actually do anything due to implicit type conversions. Fix the type
conversions, and perform the correct check for negative immediates.
This probably has very little practical impact, but it's worth fixing
just to avoid confusion in the future, I think.
Differential Revision: https://reviews.llvm.org/D48907
llvm-svn: 336742
Added statistics for the number of SMLAD instructions created, and
als renamed the pass name to -arm-parallel-dsp.
Differential Revision: https://reviews.llvm.org/D48971
llvm-svn: 336441
We were miscompiling i8 loads, so reject them as unsupported narrow operations
for now.
Differential Revision: https://reviews.llvm.org/D48944
llvm-svn: 336319
Support for negative immediates was implemented in
https://reviews.llvm.org/rL298380, however few instruction options were missing.
This change adds negative immediates support and respective tests
for the following:
ADD
ADDS
ADDS.W
AND.W
ANDS
BIC.W
BICS
BICS.W
SUB
SUBS
SUBS.W
Differential Revision: https://reviews.llvm.org/D48649
llvm-svn: 336286
With a view to support parallel operations that have their results
stored to memory, refactor the consecutive access helper out so it
could support stores instructions.
Differential Revision: https://reviews.llvm.org/D48872
llvm-svn: 336195
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 336062
Initial patch adding assembly support for Armv8.4-A.
Besides adding v8.4 as a supported architecture to the usual places, this also
adds target features for the different crypto algorithms. Armv8.4-A introduced
new crypto algorithms, made them optional, and allows different combinations:
- none of the v8.4 crypto functions are supported, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- the v8.4 SHA512 and SHA3 support is implemented, in this case the Armv8.0
SHA1 and SHA2 instructions must also be implemented.
- the v8.4 SM3 and SM4 support is implemented, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- all of the v8.4 crypto functions are supported, in this case the Armv8.0 SHA1
and SHA2 instructions must also be implemented.
The v8.4 crypto instructions are added to AArch64 only, and not AArch32,
and are made optional extensions to Armv8.2-A.
The user-facing Clang options will map on these new target features, their
naming will be compatible with GCC and added in follow-up patches.
The Armv8.4-A instruction sets can be downloaded here:
https://developer.arm.com/products/architecture/a-profile/exploration-tools
Differential Revision: https://reviews.llvm.org/D48625
llvm-svn: 335953
We don't ever check these again (unless you're using
-fno-integrated-as), so make sure the extracted bits are well-defined.
I don't think it's possible to trigger any of the assertions on trunk,
but it's difficult to prove. (The first one depends on DAGCombine to
minimize the number of set bits in AND masks; I think the others are
mathematically impossible to hit.)
llvm-svn: 335931
Mostly just adding checks for Thumb2 instructions which correspond to
ARM instructions which already had diagnostics. While I'm here, also fix
ARM-mode strd to check the input registers correctly.
Differential Revision: https://reviews.llvm.org/D48610
llvm-svn: 335909
Add NoTrapAfterNoreturn target option which skips emission of traps
behind noreturn calls even if TrapUnreachable is enabled.
Enable the feature on Mach-O to save code size; Comments suggest it is
not possible to enable it for the other users of TrapUnreachable.
rdar://41530228
DifferentialRevision: https://reviews.llvm.org/D48674
llvm-svn: 335877
Armv6 introduced instructions to perform 32-bit SIMD operations. The purpose of
this pass is to do some straightforward IR pattern matching to create ACLE DSP
intrinsics, which map on these 32-bit SIMD operations.
Currently, only the SMLAD instruction gets recognised. This instruction
performs two multiplications with 16-bit operands, and stores the result in an
accumulator. We will follow this up with patches to recognise SMLAD in more
cases, and also to generate other DSP instructions (like e.g. SADD16).
Patch by: Sam Parker and Sjoerd Meijer
Differential Revision: https://reviews.llvm.org/D48128
llvm-svn: 335850
These are all benign races and only visible in !NDEBUG. tsan complains
about it, but a simple atomic bool is sufficient to make it happy.
llvm-svn: 335823
This patch adds support for the q versions of the dup
(load-to-all-lanes) NEON intrinsics, such as vld2q_dup_f16() for
example.
Currently, non-q versions of the dup intrinsics are implemented
in clang by generating IR that first loads the elements of the
structure into the first lane with the lane (to-single-lane)
intrinsics, and then propagating it other lanes. There are at
least two problems with this approach. First, there are no
double-spaced to-single-lane byte-element instructions. For
example, there is no such instruction as 'vld2.8 { d0[0], d2[0]
}, [r0]'. That means we cannot rely on the to-single-lane
intrinsics and instructions to implement the q versions of the
dup intrinsics. Note that to-all-lanes instructions do support
all sizes of data items, including bytes.
The second problem with the current approach is that we need a
separate vdup instruction to propagate the structure to each
lane. So for vld4q_dup_f16() we would need four vdup instructions
in addition to the initial vld instruction.
This patch introduces dup LLVM intrinsics and reworks handling of
the currently supported (non-q) NEON dup intrinsics to expand
them into those LLVM intrinsics, thus eliminating the need for
using to-single-lane intrinsics and instructions.
Additionally, this patch adds support for u64 and s64 dup NEON
intrinsics. These are marked as Arch64-only in the ARM NEON
Reference, but it seems there are no reasons to not support them
in AArch32 mode. Please correct, if that is wrong.
That's what we generate with this patch applied:
vld2q_dup_f16:
vld2.16 {d0[], d2[]}, [r0]
vld2.16 {d1[], d3[]}, [r0]
vld3q_dup_f16:
vld3.16 {d0[], d2[], d4[]}, [r0]
vld3.16 {d1[], d3[], d5[]}, [r0]
vld4q_dup_f16:
vld4.16 {d0[], d2[], d4[], d6[]}, [r0]
vld4.16 {d1[], d3[], d5[], d7[]}, [r0]
Differential Revision: https://reviews.llvm.org/D48439
llvm-svn: 335733
Summary:
If a routine with no stack frame makes a sibling call, we need to
preserve the stack space check even if the local stack frame is empty,
since the call target could be a "no-split" function (in which case
the linker needs to be able to fix up the prolog sequence in order to
switch to a larger stack).
This fixes PR37807.
Reviewers: cherry, javed.absar
Subscribers: srhines, llvm-commits
Differential Revision: https://reviews.llvm.org/D48444
llvm-svn: 335604
When the condition code for an IT instruction is "AL" we get strange "15"
predicates on subsequent instructions. These are dealt with for most
instructions by treating them as "ARMCC::AL", but VFP takes a different path
which didn't have this code.
llvm-svn: 335594
IT instructions are allowed to have the 'AL' predicate, but it must never
result in an 'NV' predicated instruction. Essentially this means that all
branches must be 't' rather than 'e' if the predicate is 'AL'.
This patch adds a diagnostic for this during assembly (error because parsing
hits an assertion if allowed to continue) and an annotation during disassembly.
llvm-svn: 335593
This sets target feature FeatureStrictAlign for Armv6-m and Armv8-m.baseline,
because it has no support for unaligned accesses.
It looks like we always pass target feature "+strict-align" from
Clang, so this is not a user facing problem, but querying the subtarget
(in e.g. llc) for unaligned access support is incorrect.
Differential Revision: https://reviews.llvm.org/D48437
llvm-svn: 335326
This option allows codegen (such as DAGCombine or MI scheduling) to use alias
analysis information, which can help with the codegen on in-order cpu's,
especially machine scheduling. Here I have done things the same way as AArch64,
adding a subtarget feature to enable this for specific cores, and enabled it for
the R52 where we have a schedule to make use of it.
Differential Revision: https://reviews.llvm.org/D48074
llvm-svn: 335249
Thumb has more 16-bit encoding space dedicated to ADD than ORR, allowing both a
3-address encoding and a wider range of immediates. So, particularly when
optimizing for code size (but it doesn't make things worse elsewhere) it's
beneficial to select an OR operation to an ADD if we know overflow won't occur.
This is made even better by LLVM's penchant for putting operations in canonical
form by converting the other way.
llvm-svn: 335119
So far, we've only handled special cases of PatFrag like ImmLeaf. This patch
adds support for the remaining cases using similar mechanisms.
Like most C++ code from SelectionDAG, GISel and DAGISel expect to operate on
different types and representations and as such the code is not compatible
between the two. It's therefore necessary to add an alternative implementation
in the GISelPredicateCode field.
The target test for this feature could easily be done with IntImmLeaf and this
would save on a little boilerplate. The reason I've chosen to implement this
using PatFrag.GISelPredicateCode and not IntImmLeaf is because I was unable to
find a rule that was blocked solely by lack of support for PatFrag predicates. I
found that the ones I investigated as being likely candidates for the test
were further blocked by other things.
llvm-svn: 334871
As discussed on PR33744, this patch relaxes ShuffleKind::SK_Alternate which requires shuffle masks to only match an alternating pattern from its 2 sources:
e.g. v4f32: <0,5,2,7> or <4,1,6,3>
This seems far too restrictive as most SIMD hardware which will implement it using a general blend/bit-select instruction, so replaces it with SK_Select, permitting elements from either source as long as they are inline:
e.g. v4f32: <0,5,2,7>, <4,1,6,3>, <0,1,6,7>, <4,1,2,3> etc.
This initial patch just updates the name and cost model shuffle mask analysis, later patch reviews will update SLP to better utilise this - it still limits itself to SK_Alternate style patterns.
Differential Revision: https://reviews.llvm.org/D47985
llvm-svn: 334513
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47447
llvm-svn: 334361
It looks like this got left in by accident in r289794; I can't think of
any reason this check would be necessary. (Maybe it was meant to be a
check that the AND has one use? But we check that a few lines earlier.)
Differential Revision: https://reviews.llvm.org/D47921
llvm-svn: 334322
Make TII isCopyInstr() return MachineOperands through pointer to pointer
instead via reference.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47364
llvm-svn: 334105
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
When the branch target of a Thumb2 unconditional or conditonal branch is
resolved at assembly time, no range checking is performed on the result
leading to incorrect immediates. This change adds a range check:
+- 16 Megabytes for unconditional branches, +- 1 Megabyte for the
conditional branch.
Differential Revision: https://reviews.llvm.org/D46306
llvm-svn: 333997
The Thumb BL range is + or - either 16 Megabytes or 4 Megabytes depending
on whether the CPU supports Thumb2 or the v8-m baseline ops. The existing
check for BL range is incorrectly set at +- 32 Megabytes. This change
corrects the higher range and uses the lower range if the featurebits
don't have the necessary support for it.
Differential Revision: https://reviews.llvm.org/D46305
llvm-svn: 333991
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47120
llvm-svn: 333825
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47121
llvm-svn: 333819
Summary: This code is now dead as the ARM backend uses ADDCARRY/SUBCARRY/SETCCCARRY .
Reviewers: rogfer01, efriedma, rengolin, javed.absar
Subscribers: kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D47413
llvm-svn: 333544
We've had Thumb1 support for ARMISD::SUBE for a while now, so this just
works. Reduces codesize a bit for 64-bit integer comparisons.
Differential Revision: https://reviews.llvm.org/D47387
llvm-svn: 333445
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 333358
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
Also bringing ARMRegisterBankInfo::getRegBankFromRegClass
implementation up to speed with the *.td-definition.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D43982
llvm-svn: 333056
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Chances are we'll be asked again after type legalization, but before that point
it's better to claim misaligned accesses aren't allowed than to assert.
llvm-svn: 332840
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
We currently handle all aggregates by creating one large LLT, and letting the
legalizer deal with splitting them up. However using this approach means that
we can't support big endian code correctly.
This patch changes the way that the IRTranslator deals with aggregate values,
by splitting them up into their constituent element values. To do this, parts
of the translator need to be modified to deal with multiple VRegs for a single
Value.
A new Value to VReg mapper is introduced to help keep compile time under
control, currently there is no measurable impact on CTMark despite the extra
code being generated in some cases.
Patch is based on the original work of Tim Northover.
Differential Revision: https://reviews.llvm.org/D46018
llvm-svn: 332449
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary: As per title. SETCCE is deprecated and will eventually be removed.
Reviewers: rogfer01, efriedma, rengolin, javed.absar
Subscribers: kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D46512
llvm-svn: 331929
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
By default LLVM thinks very large vectors get aligned to their size when
passed across functions. Unfortunately no-one told the ARM backend so it
doesn't trigger stack realignment and so accesses can cause the usual
misalignment issues (e.g. a data abort).
This changes the ABI alignment to the stack alignment, which in practice
(and as a bonus) also coincides with the alignment "natural" vectors get.
llvm-svn: 331451
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
This adds IR intrinsics for the ARM dot-product instructions introduced in
v8.2-A.
Differential revision: https://reviews.llvm.org/D46106
llvm-svn: 331032
Back when the R52 schedule was added in rL286949, there was no way
to enable machine schedules in ARM for specific cores. Since then a
target feature has been added. This enables the feature for R52,
removing the need to manually specify compiler flags.
llvm-svn: 331027
This adds code generation support for the FP16 vmaxnm/vminnm scalar
instructions.
Differential Revision: https://reviews.llvm.org/D44675
llvm-svn: 330034
This is a follow up of rL327695 to instruction select more variants of VSELGT
and VSELGE, for which it is necessary to custom lower SELECT.
More work is required in this area, which will be addressed soon:
- more variants need to be regression tested, but this depends on the next point.
- first LowerConstantFP need to be adjusted for fp16 values.
Differential Revision: https://reviews.llvm.org/D45205
llvm-svn: 329788
Should fix UBSan bot by also checking there's no "uwtable" attribute
before skipping. Otherwise the unwind table will be useless since its
moves expect CSRs to actually be preserved.
A noreturn nounwind function can be expected to never return in any way, and by
never returning it will also never have to restore any callee-saved registers
for its caller. This makes it possible to skip spills of those registers during
function entry, saving some stack space and time in the process. This is rather
useful for embedded targets with limited stack space.
Should fix PR9970.
Patch mostly by myeisha (pmb).
llvm-svn: 329494
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: t.p.northover, RKSimon, MatzeB, bkramer
Reviewed By: bkramer
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44855
llvm-svn: 329329
A noreturn nounwind function can be expected to never return in any way, and by
never returning it will also never have to restore any callee-saved registers
for its caller. This makes it possible to skip spills of those registers during
function entry, saving some stack space and time in the process. This is rather
useful for embedded targets with limited stack space.
Should fix PR9970.
Patch by myeisha (pmb).
llvm-svn: 329287
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Summary:
Patch https://reviews.llvm.org/D44467 implements conversion of invalid
vmov instructions into valid ones. It turned out that some valid
instructions also get converted, for example
vmov.i64 d2, #0xff00ff00ff00ff00 ->
vmov.i16 d2, #0xff00
Such behavior is incorrect because according to the ARM ARM section
F2.7.7 Modified immediate constants in T32 and A32 Advanced SIMD
instructions, "On assembly, the data type must be matched in the table
if possible."
This patch fixes the isNEONmovReplicate check so that the above
instruction is not modified any more.
Reviewers: rengolin, olista01
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44678
llvm-svn: 329158
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
Follow up patch of r328313 to support the UseVMOVSR constraint. Removed
some unneeded instructions from the test and removed some stray
comments.
Differential Revision: https://reviews.llvm.org/D44941
llvm-svn: 328691
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
This patch fixes PR36658, "Constant pool entry out of range!" in Thumb1 mode.
In ARMConstantIslands::optimizeThumb2JumpTables() in Thumb1 mode,
adjustBBOffsetsAfter() is not calculating postOffset correctly by
properly accounting for the padding that is required for the constant pool
that immediately follows the jump table branch instruction.
Reviewers: t.p.northover, eli.friedman
Reviewed By: t.p.northover
Subscribers: chrib, tstellar, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D44709
llvm-svn: 328341
When targeting execute-only and fp-armv8, float constants in a compare
resulted in instruction selection failures. This is now fixed by using
vmov.f32 where possible, otherwise the floating point constant is
lowered into a integer constant that is moved into a floating point
register.
This patch also restores using fpcmp with immediate 0 under fp-armv8.
Change-Id: Ie87229706f4ed879a0c0cf66631b6047ed6c6443
llvm-svn: 328313
This fixes a few issues with the R52 instregexs to enable the full overlap checking
Differential Revision: https://reviews.llvm.org/D44767
llvm-svn: 328216
This extends the use of this attribute on ARM and AArch64 from
SVN r325900 (where it was only checked for fixed stack
allocations on ARM/AArch64, but for all stack allocations on X86).
This also adds a testcase for the existing use of disabling the
fixed stack probe with the attribute on ARM and AArch64.
Differential Revision: https://reviews.llvm.org/D44291
llvm-svn: 327897
This is the groundwork for adding the Armv8.2-A FP16 vector intrinsics, which
uses v4f16 and v8f16 vector operands and return values. All the moving parts
are tested with two intrinsics, a 1-operand v8f16 and a 2-operand v4f16
intrinsic. In a follow-up patch the rest of the intrinsics and tests will be
added.
Differential Revision: https://reviews.llvm.org/D44538
llvm-svn: 327839
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
Summary:
Currently the LLVM MC assembler is able to convert e.g.
vmov.i32 d0, #0xabababab
(which is technically invalid) into a valid instruction
vmov.i8 d0, #0xab
this patch adds support for vmov.i64 and for cases with the resulting
load types other than i8, e.g.:
vmov.i32 d0, #0xab00ab00 ->
vmov.i16 d0, #0xab00
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: rengolin, javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44467
llvm-svn: 327709
Summary:
Currently the check is incorrect and the following invalid
instruction is accepted and incorrectly assembled:
vmov.i32 d2, #0x00a500a6
This patch fixes the issue.
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: SjoerdMeijer, javed.absar, rogfer01, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44460
llvm-svn: 327704
This implements lowering of SELECT_CC for f16s, which enables
codegen of VSEL with f16 types.
Differential Revision: https://reviews.llvm.org/D44518
llvm-svn: 327695
r327171 "Improve Dependency analysis when doing multi-node Instruction Selection"
r328170 "[DAG] Enforce stricter NodeId invariant during Instruction selection"
Reverting patch as NodeId invariant change is causing pathological
increases in compile time on PPC
llvm-svn: 327197
Instruction Selection makes use of the topological ordering of nodes
by node id (a node's operands have smaller node id than it) when doing
cycle detection. During selection we may violate this property as a
selection of multiple nodes may induce a use dependence (and thus a
node id restriction) between two unrelated nodes. If a selected node
has an unselected successor this may allow us to miss a cycle in
detection an invalid selection.
This patch fixes this by marking all unselected successors of a
selected node have negated node id. We avoid pruning on such negative
ids but still can reconstruct the original id for pruning.
In-tree targets have been updated to replace DAG-level replacements
with ISel-level ones which enforce this property.
This preemptively fixes PR36312 before triggering commit r324359 relands
Reviewers: craig.topper, bogner, jyknight
Subscribers: arsenm, nhaehnle, javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43198
llvm-svn: 327170
This patch handling:
Enable parsing of raw encodings of system registers .
Allows UNPREDICTABLE sysregs to be decoded to a raw number in the same way that disasslib does, rather than llvm crashing.
Disassemble msr/mrs with unpredictable sysregs as SoftFail.
Fix regression due to SoftFailing some encodings.
Patch by Chris Ryder
Differential revision:https://reviews.llvm.org/D43374
llvm-svn: 326803
These instructions require that the two S registers are adjacent (but not the R
registers), because only the first register is included in the encoding, but we
were not checking this in the assembler.
Differential revision: https://reviews.llvm.org/D44084
llvm-svn: 326696
When an Armv6m function dynamically re-aligns the stack, access to incoming
stack arguments (and to stack area, allocated for register varargs) is done via
SP, which is incorrect, as the SP is offset by an unknown amount relative to the
value of SP upon function entry.
This patch fixes it, by making access to "fixed" frame objects be done via FP
when the function needs stack re-alignment. It also changes the access to
"fixed" frame objects be done via FP (instead of using R6/BP) also for the case
when the stack frame contains variable sized objects. This should allow more
objects to fit within the immediate offset of the load instruction.
All of the above via a small refactoring to reuse the existing
`ARMFrameLowering::ResolveFrameIndexReference.`
Differential Revision: https://reviews.llvm.org/D43566
llvm-svn: 326584
Code generation of VLD3, VLD4, VST3 and VST4 with register writeback is
broken due to 2 separate bugs:
1) VLD1d64TPseudoWB_register and VLD1d64QPseudoWB_register are missing
rules to expand them to non pseudo MIR. These are selected for
ARMISD::VLD3_UPD/VLD4_UPD with v1i64 vectors in SelectVLD.
2) Selection of the right VLD/VST instruction is broken for load and
store of 3 and 4 v1i64 vectors. SelectVLD and SelectVST are called
with MIR opcode for fixed writeback (ie increment is access size)
and call getVLDSTRegisterUpdateOpcode() to select an opcode with
register writeback if base register update is of a different size.
Since getVLDSTRegisterUpdateOpcode() only knows about
VLD1/VLD2/VST1/VST2 the call is currently conditional on the number
of element in the vector.
However, VLD1/VST1 is selected by SelectVLD/SelectVST's caller for
load and stores of 3 or 4 v1i64 vectors. Therefore the opcode is not
updated which later lead to a fixed writeback instruction being
constructed with an extra operand for the register writeback.
This patch addresses the two issues as follows:
- it adds the necessary mapping from VLD1d64TPseudoWB_register and
VLD1d64QPseudoWB_register to VLD1d64Twb_register and
VLD1d64Qwb_register respectively. Like for the existing _fixed
variants, the cost of these is bumped for unaligned access.
- it changes the logic in SelectVLD and SelectVSD to call isVLDfixed
and isVSTfixed respectively to decide whether the opcode should be
updated. It also reworks the logic and comments for pushing the
writeback offset operand and r0 operand to clarify the logic:
writeback offset needs to be pushed if it's a register writeback,
r0 needs to be pushed if not and the instruction is a
VLD1/VLD2/VST1/VST2.
Reviewers: rengolin, t.p.northover, samparker
Reviewed By: samparker
Patch by Thomas Preud'homme <thomas.preudhomme@arm.com>
Differential Revision: https://reviews.llvm.org/D42970
llvm-svn: 326570
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Martin Svanfeldt
Reviewers: fhahn, pbarrio, rogfer01
Reviewed By: pbarrio, rogfer01
Subscribers: chrib, yroux, eugenis, efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 326333
We were always setting the block alignment to 2 bytes in Thumb mode
and 4-bytes in ARM mode (r325754, and r325012), but this could cause
reducing the block alignment when it already had been aligned (e.g.
in Thumb mode when the block is a CPE that was already 4-byte aligned).
Patch by Momchil Velikov, I've only added a test.
Differential Revision: https://reviews.llvm.org/D43777
llvm-svn: 326232
Currently we assert that only non target specific opcodes can have
missing RegisterClass constraints in the MCDesc. The backend can have
instructions with register operands but don't have RegisterClass
constraints (say using unknown_class) in which case the instruction
defining the register will constrain it.
Change the assert to only fire if a def has no regclass.
https://reviews.llvm.org/D43409
llvm-svn: 326142
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Fixup to rL325573 for large xor constants.
Thanks to Eli Friedman for the catch.
Differential revision: https://reviews.llvm.org/D43549
llvm-svn: 325761
This is a follow up of r325012, that allowed half types in constant pools.
Proper alignment was enforced when a big basic block was split up, but not when
a CPE was placed before/after a block; the successor block had the wrong
alignment.
Differential Revision: https://reviews.llvm.org/D43580
llvm-svn: 325754
We can always convert xor %a, -1 into MVN, even in thumb 1 where the -1
would not otherwise be considered a cheap constant. This prevents the
-1's from being pulled out into constants and potentially hoisted.
Differential Revision: https://reviews.llvm.org/D43451
llvm-svn: 325573
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Eli Friedman
llvm-svn: 325327
This patch combines some cases of ARMISD::CMOV for integers that arise in comparisons of the form
a != b ? x : 0
a == b ? 0 : x
and that currently (e.g. in Thumb1) are emitted as branches.
Differential Revision: https://reviews.llvm.org/D34515
llvm-svn: 325323
Summary:
In LLVM, 't' selects a floating-point/SIMD register and only supports
32-bit values. This is appropriately documented in the LLVM Language
Reference Manual. However, this behaviour diverges from that of GCC, where
't' selects the s0-s31 registers and its qX and dX variants depending on
additional operand modifiers (q/P).
For example, the following C code:
#include <arm_neon.h>
float32x4_t a, b, x;
asm("vadd.f32 %0, %1, %2" : "=t" (x) : "t" (a), "t" (b))
results in the following assembly if compiled with GCC:
vadd.f32 s0, s0, s1
whereas LLVM will show "error: couldn't allocate output register for
constraint 't'", since a, b, x are 128-bit variables, not 32-bit.
This patch extends the use of 't' to mean that of GCC, thus allowing
selection of the lower Q vector regs and their D/S variants. For example,
the earlier code will now compile as:
vadd.f32 q0, q0, q1
This behaviour still differs from that of GCC but I think it is actually
more correct, since LLVM picks up the right register type based on the
datatype of x, while GCC would need an extra operand modifier to achieve
the same result, as follows:
asm("vadd.f32 %q0, %q1, %q2" : "=t" (x) : "t" (a), "t" (b))
Since this is only an extension of functionality, existing code should not
be affected by this change. Note that operand modifiers q/P are already
supported by LLVM, so this patch should suffice to support inline
assembly with constraint 't' originally built for GCC.
Reviewers: grosbach, rengolin
Reviewed By: rengolin
Subscribers: rogfer01, efriedma, olista01, aemerson, javed.absar, eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42962
llvm-svn: 325244
Change ARMConstantIslandPass to:
- accept f16 literals as litpool entries,
- if the litpool needs to be inserted in the middle of a big block, then we
need to 4-byte align the next instruction in ARM mode.
Differential Revision: https://reviews.llvm.org/D42784
llvm-svn: 325012
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes
ARMFastISel to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324781
ARMDisassembler now depends on the banked register tables in ARMUtils, so the
LLVMBuild.txt needed updating to reflect this.
Original commit mesage:
[ARM] Fix disassembly of invalid banked register moves
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324606
The broken bot (clang-ppc64le-linux-multistage) is doign a shared-object build,
so I guess using lookupBankedRegByEncoding in the disassembler is a layering
violation?
llvm-svn: 324604
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324600
This is a follow up of r324321, adding a match pattern for mov with a FP16
immediate (also fixing operand vfp_f16imm that wasn't even compiling).
Differential Revision: https://reviews.llvm.org/D42973
llvm-svn: 324456
This is a follow up of r324321, adding f16 <-> f32 and f16 <-> f64 conversion
match patterns.
Differential Revision: https://reviews.llvm.org/D42954
llvm-svn: 324360
This adds most of the FP16 codegen support, but these areas need further work:
- FP16 literals and immediates are not properly supported yet (e.g. literal
pool needs work),
- Instructions that are generated from intrinsics (e.g. vabs) haven't been
added.
This will be addressed in follow-up patches.
Differential Revision: https://reviews.llvm.org/D42849
llvm-svn: 324321
Commit r323512 introduced an optimisation in LowerReturn for half-precision
return values. A missing check caused a crash when the return value is "undef"
(i.e. a node that has no operands).
Differential Revision: https://reviews.llvm.org/D42743
llvm-svn: 323968
This fixes bugzilla 33011
https://bugs.llvm.org/show_bug.cgi?id=33011
Defines bits {19-16} as zero or unpredictable as specified by the ARM ARM in
sections A8.8.116 and A8.8.117.
It fixes also the usage of PC register as destination register for MVN
register-shifted register version as specified in A8.8.117.
Differential Revision: https://reviews.llvm.org/D41905
llvm-svn: 323954
Start using the new LegalizerInfo API introduced in r323681.
Keep the old API for opcodes that need Lowering in some circumstances
(G_FNEG and G_UREM/G_SREM).
llvm-svn: 323876
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Marten Svanfeldt.
Reviewers: fhahn, pbarrio
Reviewed By: pbarrio
Subscribers: efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 323869
Half-precision arguments and return values are passed as if it were an int or
float for ARM. This results in truncates and bitcasts to/from i16 and f16
values, which are legalized very early to stack stores/loads. When FullFP16 is
enabled, we want to avoid codegen for these bitcasts as it is unnecessary and
inefficient.
Differential Revision: https://reviews.llvm.org/D42580
llvm-svn: 323861
In Thumb 1, with the new ADDCARRY / SUBCARRY the scheduler may need to do
copies CPSR ↔ GPR but not all Thumb1 targets implement them.
The schedule can attempt, before attempting a copy, to clone the instructions
but it does not currently do that for nodes with input glue. In this patch we
introduce a target-hook to let the hook decide if a glued machinenode is still
eligible for copying. In this case these are ARM::tADCS and ARM::tSBCS .
As a follow-up of this change we should actually implement the copies for the
Thumb1 targets that do implement them and restrict the hook to the targets that
can't really do such copy as these clones are not ideal.
This change fixes PR35836.
Differential Revision: https://reviews.llvm.org/D42051
llvm-svn: 323857
Legal if we have hardware support for floating point, libcalls
otherwise.
Also add the necessary support for libcalls in the legalizer helper.
llvm-svn: 323726
Summary:
Apparently, we missed on constraining register classes of VReg-operands of all the instructions
built from a destination pattern but the root (top-level) one. The issue exposed itself
while selecting G_FPTOSI for armv7: the corresponding pattern generates VTOSIZS wrapped
into COPY_TO_REGCLASS, so top-level COPY_TO_REGCLASS gets properly constrained,
while nested VTOSIZS (or rather its destination virtual register to be exact) does not.
Fixing this by issuing GIR_ConstrainSelectedInstOperands for every nested GIR_BuildMI.
https://bugs.llvm.org/show_bug.cgi?id=35965
rdar://problem/36886530
Patch by Roman Tereshin
Reviewers: dsanders, qcolombet, rovka, bogner, aditya_nandakumar, volkan
Reviewed By: dsanders, qcolombet, rovka
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42565
llvm-svn: 323692
Summary:
The improvements to the LegalizerInfo discussed in D42244 require that
LegalizerInfo::LegalizeAction be available for use in other classes. As such,
it needs to be moved out of LegalizerInfo. This has been done separately to the
next patch to minimize the noise in that patch.
llvm-svn: 323669
Create and use FP16Pat FullFP16Pat helper patterns to make the difference
explicit.
Differential Revision: https://reviews.llvm.org/D42634
llvm-svn: 323640
load instruction
The function `Thumb1InstrInfo::loadRegFromStackSlot` accepts only the `tGPR`
register class. The function serves to emit a `tLDRspi` instruction and
certainly any subset of the `tGPR` register class is a valid destination of the
load.
Differential revision: https://reviews.llvm.org/D42535
llvm-svn: 323514
This is the groundwork for Armv8.2-A FP16 code generation .
Clang passes and returns _Float16 values as floats, together with the required
bitconverts and truncs etc. to implement correct AAPCS behaviour, see D42318.
We will implement half-precision argument passing/returning lowering in the ARM
backend soon, but for now this means that this:
_Float16 sub(_Float16 a, _Float16 b) {
return a + b;
}
gets lowered to this:
define float @sub(float %a.coerce, float %b.coerce) {
entry:
%0 = bitcast float %a.coerce to i32
%tmp.0.extract.trunc = trunc i32 %0 to i16
%1 = bitcast i16 %tmp.0.extract.trunc to half
<SNIP>
%add = fadd half %1, %3
<SNIP>
}
When FullFP16 is *not* supported, we don't make f16 a legal type, and we get
legalization for "free", i.e. nothing changes and everything works as before.
And also f16 argument passing/returning is handled.
When FullFP16 is supported, we do make f16 a legal type, and have 2 places that
we need to patch up: f16 argument passing and returning, which involves minor
tweaks to avoid unnecessary code generation for some bitcasts.
As a "demonstrator" that this works for the different FP16, FullFP16, softfp
modes, etc., I've added match rules to the VSUB instruction description showing
that we can codegen this instruction from IR, but more importantly, also to
some conversion instructions. These conversions were causing issue before in
the FP16 and FullFP16 cases.
I've also added match rules to the VLDRH and VSTRH desriptions, so that we can
actually compile the entire half-precision sub code example above. This showed
that these loads and stores had the wrong addressing mode specified: AddrMode5
instead of AddrMode5FP16, which turned out not be implemented at all, so that
has also been added.
This is the minimal patch that shows all the different moving parts. In patch
2/3 I will add some efficient lowering of bitcasts, and in 2/3 I will add the
remaining Armv8.2-A FP16 instruction descriptions.
Thanks to Sam Parker and Oliver Stannard for their help and reviews!
Differential Revision: https://reviews.llvm.org/D38315
llvm-svn: 323512
Summary: For long shifts, the inlined version takes about 20 instructions on Thumb1. To avoid the code bloat, expand to __aeabi_ calls if target is Thumb1.
Reviewers: samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42401
llvm-svn: 323354
This matches what MSVC does for alloca() function calls on ARM.
Even if MSVC doesn't support VLAs at the language level, it does
support the alloca function.
On the clang level, both the _alloca() (when emulating MSVC, which is
what the alloca() function expands to) and __builtin_alloca() builtin
functions, and VLAs, map to the same LLVM IR "alloca" function - so
within LLVM they're not distinguishable from each other.
Differential Revision: https://reviews.llvm.org/D42292
llvm-svn: 323308
As noted in another review, this loop is confusing. This commit cleans it up
somewhat.
Differential Revision: https://reviews.llvm.org/D42312
llvm-svn: 323136
1. ReachingDefsAnalysis - Allows to identify for each instruction what is the “closest” reaching def of a certain register. Used by BreakFalseDeps (for clearance calculation) and ExecutionDomainFix (for arbitrating conflicting domains).
2. ExecutionDomainFix - Changes the variant of the instructions in order to minimize domain crossings.
3. BreakFalseDeps - Breaks false dependencies.
4. LoopTraversal - Creatws a traversal order of the basic blocks that is optimal for loops (introduced in revision L293571). Both ExecutionDomainFix and ReachingDefsAnalysis use this to determine the order they will traverse the basic blocks.
This also included the following changes to ExcecutionDepsFix original logic:
1. BreakFalseDeps and ReachingDefsAnalysis logic no longer restricted by a register class.
2. ReachingDefsAnalysis tracks liveness of reg units instead of reg indices into a given reg class.
Additional changes in affected files:
1. X86 and ARM targets now inherit from ExecutionDomainFix instead of ExecutionDepsFix. BreakFalseDeps also was added to the passes they activate.
2. Comments and references to ExecutionDepsFix replaced with ExecutionDomainFix and BreakFalseDeps, as appropriate.
Additional refactoring changes will follow.
This commit is (almost) NFC.
The only functional change is that now BreakFalseDeps will break dependency for all register classes.
Since no additional instructions were added to the list of instructions that have false dependencies, there is no actual change yet.
In a future commit several instructions (and tests) will be added.
This is the first of multiple patches that fix bugzilla https://bugs.llvm.org/show_bug.cgi?id=33869
Most of the patches are intended at refactoring the existent code.
Additional relevant reviews:
https://reviews.llvm.org/D40331https://reviews.llvm.org/D40332https://reviews.llvm.org/D40333https://reviews.llvm.org/D40334
Differential Revision: https://reviews.llvm.org/D40330
Change-Id: Icaeb75e014eff96a8f721377783f9a3e6c679275
llvm-svn: 323087
Fix a performance regression caused by r322737.
While trying to make it easier to replace compares with existing adds and
subtracts, I accidentally stopped it from doing so in some cases. This should
fix that. I'm also fixing another potential bug in that commit.
Differential Revision: https://reviews.llvm.org/D42263
llvm-svn: 322972
Every known PE COFF target emits /EXPORT: linker flags into a .drective
section. The AsmPrinter should handle this.
While we're at it, use global_values() and emit each export flag with
its own .ascii directive. This should make the .s file output more
readable.
llvm-svn: 322788
This extends my previous patches to also optimize overflow-checked multiplies during SelectionDAG.
Differential revision: https://reviews.llvm.org/D40922
llvm-svn: 322738
The ARM backend contains code that tries to optimize compares by replacing them with an existing instruction that sets the flags the same way. This allows it to replace a "cmp" with a "adds", generalizing the code that replaces "cmp" with "sub". It also heuristically disables sinking of instructions that could potentially be used to replace compares (currently only if they're next to each other).
Differential revision: https://reviews.llvm.org/D38378
llvm-svn: 322737
Mark G_FPEXT and G_FPTRUNC as legal or libcall, depending on hardware
support, but only for conversions between float and double.
Also add the necessary boilerplate so that the LegalizerHelper can
introduce the required libcalls. This also works only for float and
double, but isn't too difficult to extend when the need arises.
llvm-svn: 322651
For hard float with VFP4, it is legal. Otherwise, we use libcalls.
This needs a bit of support in the LegalizerHelper for soft float
because we didn't handle G_FMA libcalls yet. The support is trivial, as
the only difference between G_FMA and other libcalls that we already
handle is that it has 3 input operands rather than just 2.
llvm-svn: 322366
This patch teaches the Arm back-end to generate the SMMULR, SMMLAR and SMMLSR
instructions from equivalent IR patterns.
Differential Revision: https://reviews.llvm.org/D41775
llvm-svn: 322361
The PeepholeOptimizer would fail for vregs without a definition. If this
was caused by an undef operand abort to keep the code simple (so we
don't need to add logic everywhere to replicate the undef flag).
Differential Revision: https://reviews.llvm.org/D40763
llvm-svn: 322319
For hard float, it is legal.
For soft float, we need to lower to 0 - x first, and then we can use the
libcall for G_FSUB. This is undoing some of the canonicalization
performed by the IRTranslator (which introduces G_FNEG when it sees a
0 - x). Ideally, that canonicalization would be performed by a
pre-legalizer pass that would allow targets to opt out of this behaviour
rather than dance around it in the legalizer.
llvm-svn: 322168
In -debug output we print "pred:" whenever a MachineOperand is a
predicate operand in the instruction descriptor, and "opt:" whenever a
MachineOperand is an optional def in the instruction descriptor.
Differential Revision: https://reviews.llvm.org/D41870
llvm-svn: 322096
This patch allows `r7` to be used, regardless of its use as a frame pointer, as
a temporary register when popping `lr`, and also falls back to using a high
temporary register if, for some reason, we weren't able to find a suitable low
one.
Differential revision: https://reviews.llvm.org/D40961
Fixes https://bugs.llvm.org/show_bug.cgi?id=35481
llvm-svn: 321989
Currently the assembler would accept, e.g. `ldr r0, [s0, #12]` and similar.
This patch add checks that only general-purpose registers are used in address
operands, shifted registers, and shift amounts.
Differential revision: https://reviews.llvm.org/D39910
llvm-svn: 321866
Wide Thumb2 instructions should be emitted into the object file as pairs of
16-bit words of the appropriate endianness, not one 32-bit word.
Differential revision: https://reviews.llvm.org/D41185
llvm-svn: 321799
Select G_PHI to PHI and manually constrain the result register. This is
very similar to how COPY is handled, so extract and reuse some of that
code.
llvm-svn: 321797
We used to handle G_CONSTANT with pointer type by forcing the type of
the result register to s32 and then letting TableGen handle it.
Unfortunately, setting the type only works for generic virtual
registers, that haven't yet been constrained to a register class (e.g.
those used only by a COPY later on). If the result register has already
been constrained as a use of a previously selected instruction, then
setting the type will assert.
It would be nice to be able to teach TableGen to select pointer
constants the same as integer constants, but since it's such an edge
case (at the moment the only pointer constant that we're generally
interested in is 0, and that is mostly used for comparisons and selects,
which are also not supported by TableGen) it's probably not worth the
effort right now. Instead, handle pointer constants with some trivial
handwritten code.
llvm-svn: 321793
After D41349, we can now directly access MCSubtargetInfo from
createARM*AsmBackend. This patch makes use of this, avoiding the need to
create a fresh MCSubtargetInfo (which was previously always done with a blank
CPU and feature string). Given the total size of the change remains pretty
tiny and we're removing the old explicit destructor, I changed the STI field
to a reference rather than a pointer.
Differential Revision: https://reviews.llvm.org/D41693
llvm-svn: 321707
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Pointer constants are pretty rare, since we usually represent them as
integer constants and then cast to pointer. One notable exception is the
null pointer constant, which is represented directly as a G_CONSTANT 0
with pointer type. Mark it as legal and make sure it is selected like
any other integer constant.
llvm-svn: 321354
The penalty is currently getting applied in a bunch of places where it
doesn't make sense, like bitcasts (which are free) and calls (which
were getting the call penalty applied twice). Instead, just apply the
penalty to binary operators and floating-point casts.
While I'm here, also fix getFPOpCost() to do the right thing in more
cases, so we don't have to dig into function attributes.
Differential Revision: https://reviews.llvm.org/D41522
llvm-svn: 321332
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
The AArch64 backend contains code to optimize {s,u}{add,sub}.with.overflow during SelectionDAG. This commit ports that code to the ARM backend.
Differential revision: https://reviews.llvm.org/D35635
llvm-svn: 321224
We get an assertion in RegBankSelect for code along the lines of
my_32_bit_int = my_64_bit_int, which tends to translate into a 64-bit
load, followed by a G_TRUNC, followed by a 32-bit store. This appears in
a couple of places in the test-suite.
At the moment, the legalizer doesn't distinguish between integer and
floating point scalars, so a 64-bit load will be marked as legal for
targets with VFP, and so will the rest of the sequence, leading to a
slightly bizarre G_TRUNC reaching RegBankSelect.
Since the current support for 64-bit integers is rather immature, this
patch works around the issue by explicitly handling this case in
RegBankSelect and InstructionSelect. In the future, we may want to
revisit this decision and make sure 64-bit integer loads are narrowed
before reaching RegBankSelect.
llvm-svn: 321165
Summary:
Implement lower of unsigned saturation on an interval [0, k] where k + 1 is a power of two using USAT instruction in a similar way to how [~k, k] is lowered using SSAT on ARM models that supports it.
Patch by Marten Svanfeldt
Reviewers: t.p.northover, pbarrio, eastig, SjoerdMeijer, javed.absar, fhahn
Reviewed By: fhahn
Subscribers: fhahn, aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D41348
llvm-svn: 321164
Note:
- X86ISelLowering: setLibcallName(SINCOS) was superfluous as
InitLibcalls() already does it.
- ARMISelLowering: Setting libcallnames for sincos/sincosf seemed
superfluous as in the darwin case it wouldn't be used while for all
other cases InitLibcalls already does it.
llvm-svn: 321036
r319524 has made more G_MERGE_VALUES/G_UNMERGE_VALUES pairs legal than
are supported by the rest of the pipeline. Restrict that to only the
cases that we can currently handle: packing 32-bit values into 64-bit
ones, when we have hardware FP.
llvm-svn: 320980
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
Eli Friedman