Cache filename - SourceLocation pairs to speed up preamble loading and
global completion. This is especially relevant for windows, where
preamble loading takes a while.
Patch by Ivan Donchevskii!
Differential Revision: http://reviews.llvm.org/D33493
llvm-svn: 305061
This is useful for parsing a single file, as a fast/inaccurate 'mode' that can still provide declarations from the file, like the classes and their methods.
llvm-svn: 305044
replay the steps taken to create the AST file with the preprocessor-only action
installed to produce preprocessed output.
This can be used to produce the preprocessed text for an existing .pch or .pcm
file.
llvm-svn: 304726
A suspended translation unit uses significantly less memory but on the
other side does not support any other calls than
clang_reparseTranslationUnit to resume it or
clang_disposeTranslationUnit to dispose it completely.
This helps IDEs to reduce the memory footprint. The data that is freed
by a call to clang_suspendTranslationUnit will be re-generated on the
next (re)parse anyway. Used with a preamble, this allows pretty fast
resumption of the translation unit for further use (compared to disposal
of the translation unit and a parse from scratch).
Patch by Nikolai Kosjar!
llvm-svn: 304212
Previously, a preamble only included #if blocks (and friends like
ifdef) if there was a corresponding #endif before any declaration or
definition. The problem is that any header file that uses include guards
will not have a preamble generated, which can make code-completion very
slow.
To prevent errors about unbalanced preprocessor conditionals in the
preamble, and unbalanced preprocessor conditionals after a preamble
containing unfinished conditionals, the conditional stack is stored
in the pch file.
This fixes PR26045.
Differential Revision: http://reviews.llvm.org/D15994
llvm-svn: 304207
Summary:
OnDiskData.TemporaryFiles is filled only by ASTUnit::addTemporaryFile, which is
dead. Also these files are used nowhere in the frontend nor in libclang.
Reviewers: bkramer, ilya-biryukov
Reviewed By: bkramer, ilya-biryukov
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33270
llvm-svn: 303265
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
This reverts commit r298185, effectively reapplying r298165, after fixing the
new unit tests (PR32338). The memory buffer generator doesn't null-terminate
the MemoryBuffer it creates; this version of the commit informs getMemBuffer
about that to avoid the assert.
Original commit message follows:
----
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298278
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298165
Change ASTFileSignature from a random 32-bit number to the hash of the
PCM content.
- Move definition ASTFileSignature to Basic/Module.h so Module and
ASTSourceDescriptor can use it.
- Change the signature from uint64_t to std::array<uint32_t,5>.
- Stop using (saving/reading) the size and modification time of PCM
files when there is a valid SIGNATURE.
- Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record
and other records that shouldn't affect the hash. Because implicit
modules reuses the same file for multiple levels of -Werror, this
includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS.
This helps to solve a PCH + implicit Modules dependency issue: PCH files
are handled by the external build system, whereas implicit modules are
handled by internal compiler build system. This prevents invalidating a
PCH when the compiler overwrites a PCM file with the same content
(modulo the diagnostic differences).
Design and original patch by Manman Ren!
llvm-svn: 297655
Modules/preambles/PCH files can contain diagnostics, which, when used,
are added to the current ASTUnit. For that to work, they are translated
to use the current FileManager's FileIDs. When the entry is not the
main file, all local source locations will be checked by a linear
search. Now this is a problem, when there are lots of diagnostics (say,
25000) and lots of local source locations (say, 440000), and end up
taking seconds when using such a preamble.
The fix is to cache the last FileID, because many subsequent diagnostics
refer to the same file. This reduces the time spent in
ASTUnit::TranslateStoredDiagnostics from seconds to a few milliseconds
for files with many slocs/diagnostics.
This fixes PR31353.
Differential Revision: https://reviews.llvm.org/D29755
llvm-svn: 295301
If the preamble had diagnostic state this would leave behind invalid
state in the DiagnosticsEngine and crash later. The test case runs into
an assertion in DiagnosticsEngine::setSourceManager.
llvm-svn: 294963
Aleksey Shlypanikov pointed out my mistake in migrating an explicit
unique_ptr to auto - I was expecting the function returned a unique_ptr,
but instead it returned a raw pointer - introducing a leak.
Thanks Aleksey!
This reapplies r291184, reverted in r291249.
llvm-svn: 291270
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
llvm-svn: 279096
This changes the CompilerInstance::createOutputFile function to return
a std::unique_ptr<llvm::raw_ostream>, rather than an llvm::raw_ostream
implicitly owned by the CompilerInstance. This in most cases required that
I move ownership of the output stream to the relevant ASTConsumer.
The motivation for this change is to allow BackendConsumer to be a client
of interfaces such as D20268 which take ownership of the output stream.
Differential Revision: http://reviews.llvm.org/D21537
llvm-svn: 275507
When remapped files were changed, they would not always cause the preamble's PCH to be invalidated, because the remapped path didn't necessarily match the include path (e.g. slash direction -- this happens a lot on Windows). I fixed this by moving to a llvm::sys::fs::UniqueID-based map instead of comparing paths stringwise.
Differential Revision: http://reviews.llvm.org/D20137
llvm-svn: 269769
Revert the two changes to thread CodeGenOptions into the TargetInfo allocation
and to fix the layering violation by moving CodeGenOptions into Basic.
Code Generation is arguably not particularly "basic". This addresses Richard's
post-commit review comments. This change purely does the mechanical revert and
will be followed up with an alternate approach to thread the desired information
into TargetInfo.
llvm-svn: 265806
This threads CodeGenOptions into the TargetInfo hierarchy. This is motivated by
ARM which can change some target information based on the EABI selected
(-meabi). Similar options exist for other platforms (e.g. MIPS) and thus is
generally useful. NFC.
llvm-svn: 265640
option. Previously these options could both be used to specify that you were
compiling the implementation file of a module, with a different set of minor
bugs in each case.
This change removes -fmodule-implementation-of, and instead tracks a flag to
determine whether we're currently building a module. -fmodule-name now behaves
the same way that -fmodule-implementation-of previously did.
llvm-svn: 261372
Summary:
The current default is to create the preamble on the first reparse, aka
second parse. This is useful for clients that do not want to block when
opening a file because serializing the preamble takes a bit of time.
However, this makes the reparse much more expensive and that may be on the
critical path as it's the first interaction a user has with the source code.
YouCompleteMe currently optimizes for the first code interaction by parsing
the file twice when loaded. That's just unnecessarily slow and this flag
helps to avoid that.
Reviewers: doug.gregor, klimek
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D15490
llvm-svn: 255635
Introduce the notion of a module file extension, which introduces
additional information into a module file at the time it is built that
can then be queried when the module file is read. Module file
extensions are identified by a block name (which must be unique to the
extension) and can write any bitstream records into their own
extension block within the module file. When a module file is loaded,
any extension blocks are matched up with module file extension
readers, that are per-module-file and are given access to the input
bitstream.
Note that module file extensions can only be introduced by
programmatic clients that have access to the CompilerInvocation. There
is only one such extension at the moment, which is used for testing
the module file extension harness. As a future direction, one could
imagine allowing the plugin mechanism to introduce new module file
extensions.
llvm-svn: 251955
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
ASTUnit was creating multiple FileManagers and throwing them away. Reuse
the one from Tooling. No functionality change now but necessary for
VFSifying tooling.
llvm-svn: 249410
to enable the use of external type references in the debug info
(a.k.a. module debugging).
The driver expands -gmodules to "-g -fmodule-format=obj -dwarf-ext-refs"
and passes that to cc1. All this does at the moment is set a flag
codegenopts.
http://reviews.llvm.org/D11958
llvm-svn: 246192
- introduces a new cc1 option -fmodule-format=[raw,obj]
with 'raw' being the default
- supports arbitrary module container formats that libclang is agnostic to
- adds the format to the module hash to avoid collisions
- splits the old PCHContainerOperations into PCHContainerWriter and
a PCHContainerReader.
Thanks to Richard Smith for reviewing this patch!
llvm-svn: 242499
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
A PCHContainerOperations abstract interface provides operations for
creating and unwrapping containers for serialized ASTs (precompiled
headers and clang modules). The default implementation is
RawPCHContainerOperations, which uses a flat file for the output.
The main application for this interface will be an
ObjectFilePCHContainerOperations implementation that uses LLVM to
wrap the module in an ELF/Mach-O/COFF container to store debug info
alongside the AST.
rdar://problem/20091852
llvm-svn: 240225
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238601
Now that SmallString is a first-class citizen, most SmallString::str()
calls are not required. This patch removes a whole bunch of them, yet
there are lots more.
There are two use cases where str() is really needed:
1) To use one of StringRef member functions which is not available in
SmallString.
2) To convert to std::string, as StringRef implicitly converts while
SmallString do not. We may wish to change this, but it may introduce
ambiguity.
llvm-svn: 232622
with a subset of the existing target CPU features or mismatched CPU
names.
While we can't check that the CPU name used to build the module will end
up being able to codegen correctly for the translation unit, we actually
check that the imported features are a subset of the existing features.
While here, rewrite the code to use std::set_difference and have it
diagnose all of the differences found.
Test case added which walks the set relationships and ensures we
diagnose all the right cases and accept the others.
No functional change for implicit modules here, just better diagnostics.
llvm-svn: 232248
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
This reapplies r230044 with a fixed configure+make build and updated
dependencies and testcase requirements. Over the last iteration this
version adds
- missing target requirements for testcases that specify an x86 triple,
- a missing clangCodeGen.a dependency to libClang.a in the make build.
rdar://problem/19104245
llvm-svn: 230423
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 3.
llvm-svn: 230305
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 2.
llvm-svn: 230089
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies.
llvm-svn: 230067
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
llvm-svn: 230044
Summary:
Make DiagnosticsEngine::takeClient return std::unique_ptr<>. Updated
callers to store conditional ownership using a pair of pointer and unique_ptr
instead of a pointer + bool. Updated code that temporarily registers clients to
use the non-owning registration (+ removed extra calls to takeClient).
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6294
llvm-svn: 222193
Implicit module builds are not well-suited to a lot of build systems. In
particular, they fare badly in distributed build systems, and they lead to
build artifacts that are not tracked as part of the usual dependency management
process. This change allows explicitly-built module files (which are already
supported through the -emit-module flag) to be explicitly loaded into a build,
allowing build systems to opt to manage module builds and dependencies
themselves.
This is only the first step in supporting such configurations, and it should
be considered experimental and subject to change or removal for now.
llvm-svn: 220359
The various ways to create an ASTUnit all take a refcounted pointer to
a diagnostics engine as an argument, and if it isn't pointing at
anything they initialize it. This is a pretty confusing API, and it
really makes more sense for the caller to initialize the thing since
they control the lifetime anyway.
This fixes the one caller that didn't bother initializing the pointer
and asserts that the argument is initialized.
llvm-svn: 219752
Rather than having a pair of pairs and a reference out parameter, build
a structure with everything together and named. A raw pointer and a
unique_ptr, rather than a raw pointer and a boolean, are used to
communicate ownership transfer.
It's possible one day we'll end up with a conditional pointer (probably
represented by a raw pointer and a boolean) abstraction to use in places
like this. Conditional ownership seems to be coming up more often than
I'd hoped...
llvm-svn: 216712
This change is the last in the pack of five commits
(also see r216691, r216694, r216695, and r216696) that reduces the number
of test failures in "check-clang" invocation in UBSan bootstrap
from 2443 down to 5.
llvm-svn: 216697
(dropping const from the reference as MemoryBuffer is immutable already,
so const is just redundant - and while I'd personally put const
everywhere, that's not the LLVM Way (see llvm::Type for another example
of an immutable type where "const" is omitted for brevity))
Changing the pointer argument to a reference parameter makes call sites
identical between callers with unique_ptrs or raw pointers, minimizing
the churn in a pending unique_ptr migrations.
llvm-svn: 215391
After post-commit review and community discussion, this seems like a
reasonable direction to continue, making ownership semantics explicit in
the source using the type system.
llvm-svn: 215323
This reverts commit r213307.
Reverting to have some on-list discussion/confirmation about the ongoing
direction of smart pointer usage in the LLVM project.
llvm-svn: 213325
(after fixing a bug in MultiplexConsumer I noticed the ownership of the
nested consumers was implemented with raw pointers - so this fixes
that... and follows the source back to its origin pushing unique_ptr
ownership up through there too)
llvm-svn: 213307
Erik Verbruggen