Specifically, if a braced list has at least one nested braced list,
format it either all on one line or in one column (i.e. one item per
line).
This seems in general to be an improvement as the structure of nested
braced lists can make a tightly packed outer braced list hard to read.
llvm-svn: 193345
The fused multiply instructions were added in VFPv4 but are still NEON
instructions, in particular they shouldn't be available on a Cortex-M4 not
matter how floaty it is.
llvm-svn: 193342
If an alias inherits directly from InstAlias then it doesn't get any default
"Requires" values, so llvm-mc will allow it even on architectures that don't
support the underlying instruction.
This tidies up the obvious VFP and NEON cases I found.
llvm-svn: 193340
Origin copying may destroy valid origin info. This is caused by
__msan_copy_origin widening the address range to the nearest 4-byte aligned
addresses both on the left and on the right. If the target buffer is
uninitialized and the source is fully initialized, this will result in
overriding valid origin of target buffer with stale (possibly 0) origin of the
source buffer.
With this change the widened origin is copied only if corresponding shadow
values are non zero.
llvm-svn: 193338
The compiler-rt functions __adddf3vfp and so on exist purely to allow Thumb1
code to make use of VFP instructions by switching back to ARM mode, they make
no sense for M-class processors which don't even have an ARM mode.
Given that justification, in practice this is a platform ABI decision so the
actual check is based on that rather than CPU features.
rdar://problem/15302004
llvm-svn: 193327
Without this, customers of the MCJIT were leaking memory like crazy.
It's not really clear what the *right* memory management is here, so I'm
not trying to add lots of tests or other logic, just trying to get us
back to a better baseline. I'll follow up on the original commit to
figure out the right path forward.
llvm-svn: 193323
POP instructions are aliased to the ARM LDM variants but have different syntax.
This caused two problems: we tried to access a non-existent operand to annotate
the '!', and the error message didn't make much sense.
With some vigorous hand-waving in the error message both problems can be
fixed.
llvm-svn: 193322
This GCC flag is useful when you want to control whether implicit
template instantiation occurs at the commandline level. Clang doesn't
currently support such controls, but technically *always* implicitly
instantiating (what Clang does, and what every other compiler still in
use does by default) is valid behavior even under
-fno-implicit-templates, it just may be slow and very wasteful. If
people really want this, we can try to implement it, but I don't have an
actual use.
This should help fix the build of libstdc++ with Clang, its build system
uses this flag.
llvm-svn: 193319
flag. We should probably wire at least some variants of this up to our
actual diagnostics engine, but I'm leaving that for someone else. This
fixes the builds of packages which hard code something here, at least
including libstdc++ itself.
llvm-svn: 193318
LLVM optimizers may widen accesses to packed structures that overflow the structure itself, but should be in bounds up to the alignment of the object
llvm-svn: 193317
When generating the IfTrue basic block during the F128CSEL pseudo-instruction
handling, the NZCV live-in for the newly created BB wasn't being added. This
caused a fault during MI-sched/live range calculation when the predecessor
for the fall-through BB didn't have a live-in for phys-reg as expected.
llvm-svn: 193316
This allows using virtual file mappings on the original SourceManager to
map in virtual module.map files. Without this patch, the ModuleMap
search will find a module.map file (as the FileEntry exists in the
FileManager), but will be unable to get the content from the
SourceManager (as ModuleMap previously created its own SourceManager).
Two problems needed to be fixed which this patch exposed:
1. Storing the inferred module map
When writing out a module, the ASTWriter stores the names of the files
in the main source manager; when loading the AST again, the ASTReader
errs out if such a file is found missing, unless it is overridden.
Previously CompilerInstance's compileModule method would store the
inferred module map to a temporary file; the problem with this approach
is that now that the module map is handled by the main source manager,
the ASTWriter stores the name of the temporary module map as source to
the compilation; later, when the module is loaded, the temporary file
has already been deleted, which leads to a compilation error. This patch
changes the inferred module map to instead inject a virtual file into
the source manager. This both saves some disk IO, and works with how the
ASTWriter/ASTReader handle overridden source files.
2. Changing test input in test/Modules/Inputs/*
Now that the module map file is handled by the main source manager, the
VerifyDiagnosticConsumer will not ignore diagnostics created while
parsing the module map file. The module test test/Modules/renamed.m uses
-I test/Modules/Inputs and triggers recursive loading of all module maps
in test/Modules/Inputs, some of which had conflicting names, thus
leading errors while parsing the module maps. Those diagnostics already
occur on trunk, but before this patch they would not break the test, as
they were ignored by the VerifyDiagnosticConsumer. This patch thus
changes the module maps that have been recently introduced which broke
the invariant of compatible modules maps in test/Modules/Inputs.
llvm-svn: 193314
Disable tests to be run with REQUIRES: disable. Note disable is not added to the
config by the test runner Mkaefiles, so essentially disables the test.
Code changes would be required to fix these tests :-
test/darwin/hello-world.objtxt
test/elf/check.test
test/elf/phdr.test
test/elf/ppc.test
test/elf/undef-from-main-dso.test
test/elf/X86_64/note-sections-ro_plus_rw.test
test/pecoff/alignment.test
test/pecoff/base-reloc.test
test/pecoff/bss-section.test
test/pecoff/drectve.test
test/pecoff/dynamic.test
test/pecoff/dynamicbase.test
test/pecoff/entry.test
test/pecoff/hello.test
test/pecoff/imagebase.test
test/pecoff/importlib.test
test/pecoff/lib.test
test/pecoff/multi.test
test/pecoff/reloc.test
test/pecoff/weak-external.test
llvm-svn: 193300
This was a fundamental flaw in llvm-cov where it treated the values in
the GCDA files as block counts instead of edge counts. This created
incorrect line counts when branching was present. Instead, the edge
counts should be summed to obtain the correct block count.
The fix was tested using custom test files as well as single source
files from the test-suite directory. The behaviour can be verified by
reading the GCOV documentation that describes the GCDA spec ("ARC_COUNTS
gives the counter values for those arcs that are instrumented") and the
header description provided by GCOVProfiling.cpp ("instruments the code
that runs to records (sic) the edges between blocks that run and emit a
complementary "gcda" file on exit").
llvm-svn: 193299
Instead of making the linker to create a manifest XML file in the same
directory as the resulting binary, you can embed the XML as a part of
resource into the executable.
In order to do that, the linker first creates a resource script file containing
the XML file, compile it into a binary resource file with RC.EXE, and then
convert it to a COFF file with CVTRES.EXE.
llvm-svn: 193298
which we don't think can't have one, only allow it in the tiny number of
attributes which opts into this weird parse rule.
I've manually checked that the handlers for all these attributes can in fact
cope with an identifier as the argument. This is still somewhat terrible; we
should move more fully towards picking the parsing rules based on the
attribute, and make the Parse -> Sema interface more type-safe.
llvm-svn: 193295
This patch fixes the typelocs of the conversion-operator and the conversion-operator-name and adds the parameters of the call operator to the FunctionProtoTypeLoc of the respective entities. Thus, when the template declarations (conversion operators) undergo deduction and instantiation/transformation/substitution - they add themselves to the local instantiation scope if needed.
This patch supports the following:
auto L = [](auto b) {
return [](auto a) ->decltype(a) { return a; };
};
int (*fp)(int) = L(8);
Richard LGTM'd this patch: http://llvm-reviews.chandlerc.com/D1831
Thanks!
llvm-svn: 193294
it. Also removes all of the microsoft C++ ABI related code from the
itanium layout builder.
Differential Revision: http://llvm-reviews.chandlerc.com/D2003
llvm-svn: 193290
Calling _chkstk is required on ELF as well as COFF on Windows. Without
_chkstk, functions requiring large stack crash in initialization code.
Previous code tested for COFF format but not Mach-O and this patch modifies
the code to test for Windows OS (both Windows target and MingW target)
but not Mach-O object format: Looks like macho environment was used to
build some EFI code.
Credits to Andrew MacPherson.
llvm-svn: 193289
Since we never insert DIE for DITemplateTypeParameter to a map, there is no need
to call getDIE in getOrCreateTemplateTypeParameterDIE. It is also renamed to
constructTemplateTypeParameterDIE to match with other construct functions
in CompileUnit.
Same applies to getOrCreateTemplateValueParameterDIE.
llvm-svn: 193287
Remove the unneeded return values from createMemberDIE, constructEnumTypeDIE,
getOrCreateTemplateTypeParameterDIE, and getOrCreateTemplateValueParameterDIE.
llvm-svn: 193285
Chris Wailes