Summary:
Some compressed instructions match against negative values; store
immediates as a signed value such that these patterns will now match
the intended instructions.
Reviewers: asb, lenary, PaoloS
Reviewed By: asb
Subscribers: rbar, johnrusso, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76767
Follow-up of D72172 and D72180
This patch passes `uint64_t Address` to print methods of PC-relative
operands so that subsequent target specific patches can change
`*InstPrinter::print{Operand,PCRelImm,...}` to customize the output.
Add MCInstPrinter::PrintBranchImmAsAddress which is set to true by
llvm-objdump.
```
// Current llvm-objdump -d output
aarch64: 20000: bl #0
ppc: 20000: bl .+4
x86: 20000: callq 0
// Ideal output
aarch64: 20000: bl 0x20000
ppc: 20000: bl 0x20004
x86: 20000: callq 0x20005
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
aarch64: 20000: bl 20000
ppc: 20000: bl 0x20004
x86: 20000: callq 20005
```
In `lib/Target/X86/X86GenAsmWriter1.inc` (generated by `llvm-tblgen -gen-asm-writer`):
```
case 12:
// CALL64pcrel32, CALLpcrel16, CALLpcrel32, EH_SjLj_Setup, JCXZ, JECXZ, J...
- printPCRelImm(MI, 0, O);
+ printPCRelImm(MI, Address, 0, O);
return;
```
Some targets have 2 `printOperand` overloads, one without `Address` and
one with `Address`. They should annotate derived `Operand` properly with
`let OperandType = "OPERAND_PCREL"`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76574
This allows creating custom test formats on top of `executeShTest` that
inject commands at the beginning of the file being parsed, without
requiring these commands to physically appear in the test file itself.
For example, one could define a test format that prints out additional
debug information at the beginning of each test. More realistically,
this has been used to define custom test formats like one that supports
compilation failure tests (e.g. with the extension `compile.fail.cpp`)
by injecting a command that calls the compiler on the file itself and
expects it to fail.
Without this change, the only alternative is to create a temporary file
with the same content as the original test, then prepend the desired
`// RUN:` lines to that file, and call `executeShTest` on that file
instead. This is both slow and cumbersome to do.
Differential Revision: https://reviews.llvm.org/D76290
Remove the local versions of the IR_FUNCTION_RE matcher (they weren't doing anything different), and ensure all the function name matchers accept '.' and '-'.
We don't need to use '\.' inside python regex sets either, or '\-' as long as thats at the end of the set.
For MTE error reporting we will need to expose interfaces for crash handlers
to use to interpret scudo headers and metadata. The intent is that these
interfaces will live in scudo/interface.h.
Move the existing interface.h into an include/scudo directory and make it
independent of the internal headers, so that we will be able to add the
interfaces there.
Differential Revision: https://reviews.llvm.org/D76648
This reverts commit e9f22fd429.
When building with -DLLVM_USE_SANITIZER="Thread", check-llvm has 70
failing tests with this revision, and 29 without this revision.
This commit adds a new keyword in lit called ALLOW_RETRIES. This keyword
takes a single integer as an argument, and it allows the test to fail that
number of times before it first succeeds.
This work attempts to make the existing test_retry_attempts more flexible
by allowing by-test customization, as well as eliminate libc++'s FLAKY_TEST
custom logic.
Differential Revision: https://reviews.llvm.org/D76288
This patch generates TableGen descriptions for the specified register
banks which contain a list of register sizes corresponding to the
available HwModes. The appropriate size is used during codegen according
to the current HwMode. As this HwMode was not available on generation,
it is set upon construction of the RegisterBankInfo class. Targets
simply need to provide the HwMode argument to the
<target>GenRegisterBankInfo constructor.
The RISC-V RegisterBankInfo constructor has been updated accordingly
(plus an unused argument removed).
Differential Revision: https://reviews.llvm.org/D76007
This patch rewrites the RegisterBankEmitter class to derive
RegisterClassHierarchy from CodeGenTarget::getRegBank() rather than
constructing our own copy. All are now accessed through a const
reference.
Differential Revision: https://reviews.llvm.org/D76006
For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
Summary: This patch renames the "llvm-gsym" tool directory to "llvm-gsymutil". Dependencies are also reduced to the bare minimum for llvm-gsymutil.
Reviewers: aprantl, thakis
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75291
Lots of headers pass around MemoryBuffer objects, but very few open
them. Let those that do include FileSystem.h.
Saves ~250 includes of Chrono.h & FileSystem.h:
$ diff -u thedeps-before.txt thedeps-after.txt | grep '^[-+] ' | sort | uniq -c | sort -nr
254 - ../llvm/include/llvm/Support/FileSystem.h
253 - ../llvm/include/llvm/Support/Chrono.h
237 - ../llvm/include/llvm/Support/NativeFormatting.h
237 - ../llvm/include/llvm/Support/FormatProviders.h
192 - ../llvm/include/llvm/ADT/StringSwitch.h
190 - ../llvm/include/llvm/Support/FormatVariadicDetails.h
...
This requires duplicating the file_t typedef, which is unfortunate. I
sunk the choice of mapping mode down into the cpp file using variable
template specializations instead of class members in headers.
Now that the Windows installer no longer does anything besides
self-extract, maybe it would make sense to distribute the toolchain as a
plain zip file in addition to the current installer.
Differential revision: https://reviews.llvm.org/D74896
Summary:
The type used to represent functional units in MC is
'unsigned', which is 32 bits wide. This is currently
not a problem in any upstream target as no one seems
to have hit the limit on this yet, but in our
downstream one, we need to define more than 32
functional units.
Increasing the size does not seem to cause a huge
size increase in the binary (an llc debug build went
from 1366497672 to 1366523984, a difference of 26k),
so perhaps it would be acceptable to have this patch
applied upstream as well.
Subscribers: hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71210
isPrefix was added to support the patches to align branches.
it relies on a switch over instruction names.
This moves those opcodes to a new format so the information is
tablegen and we can just check for a specific value in some bits
in TSFlags instead.
I've left the other function in place for now so that the
existing patches in phabricator will still work. I'll work with
the owner to get them migrated.
The Blocks runtime provide a header named Block.h.
It is generally preferable to avoid name collision with system headers
(reducing reliance on -isystem order, more friendly when navigating files in
an editor, etc).
Reviewed By: gribozavr2
Differential Revision: https://reviews.llvm.org/D74934
I was drafting a patch that would increase broadcast load usage,
but our shuffle scrubbing makes it impossible to see if the memory
operand offset was getting created correctly. I'm proposing to make
that an option (defaulted to 'off' for now to reduce regression
test churn).
The updated files provide examples of tests where we can now verify
that the pointer offset for a loaded memory operand is correct. We
still have stack and constant scrubbing that can obscure the operand
even if we don't scrub the entire instruction.
Differential Revision: https://reviews.llvm.org/D74775
This was checking for default operands in the current DAG instruction,
rather than the correct result operand list. I'm not entirly sure how
this managed to work before, but was failing for me when multiple
default operands were overridden.
\<foo\> is more correct, but since we use shell=True on Windows,
the < and > get interpreted as redirection operators.
Rather than adding cmd escaping, just use \bfoo\b, which is Good
Enough Often Enough.
Summary:
Previously TableGen would crash trying to print the undefined value as
an integer.
Change-Id: I3900071ceaa07c26acafb33bc49966d7d7a02828
Reviewers: nhaehnle
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74210
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
Summary:
In the DAG pattern backend, `SimplifyTree` simplifies a pattern by
removing bitconverts between two identical types. But that function is
also run on the fragments list in instances of `PatFrags`, in which
the types haven't been specified yet. So the input and output of the
bitconvert always evaluate to the empty set of types, which makes them
compare equal. So the test always passes, and bitconverts are
unconditionally removed from the PatFrag RHS.
Fixed by spotting the empty type set and using it to inhibit the
optimization.
Reviewers: nhaehnle, hfinkel
Reviewed By: nhaehnle
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74627
Summary:
Many directives are unavailable, and support for others may be limited.
This first draft has preliminary support for:
- conditional directives (including errors),
- data allocation (unsigned types up to 8 bytes, and ALIGN),
- equates/variables (numeric and text),
- and procedure directives (without parameters),
as well as COMMENT, ECHO, INCLUDE, INCLUDELIB, PUBLIC, and EXTERN. Text variables (aka text macros) are expanded in-place wherever the identifier occurs.
We deliberately ignore all ml.exe processor directives.
Prominent features not yet supported:
- structs
- macros (both procedures and functions)
- procedures (with specified parameters)
- substitution & expansion operators
Conditional directives are complicated by the fact that "ifdef rax" is a valid way to check if a file is being assembled for a 64-bit x86 processor; we add support for "ifdef <register>" in general, which requires adding a tryParseRegister method to all MCTargetAsmParsers. (Some targets require backtracking in the non-register case.)
Reviewers: rnk, thakis
Reviewed By: thakis
Subscribers: kerbowa, merge_guards_bot, wuzish, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, mgorny, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72680
This is like -fdata-sections, and it's not part of /O2 by default for some reason.
In the cmake build, reduces the size of clang.exe from 70,358,016 bytes to 69,982,720 bytes.
clang-format.exe goes from 3,703,296 bytes to 3,331,072 bytes.
Differential Revision: https://reviews.llvm.org/D74573
Before, the script used `git log -SFoo.cpp` to find a commit where
the number of occurrences of "Foo.cpp" changed -- but since
a patch with
+ LLVMFoo.cpp
- Foo.cpp
contains the same number of instances of "Foo.cpp", the script
incorrectly skipped this type of rename.
As fix, look for '\bFoo\.cpp\b' instead and pass --pickaxe-regex
so that we can grep for word boundaries.
To test, check out 7531a5039f (which renamed in llvm/lib/IR
RemarkStreamer.cpp to LLVMRemarkStreamer.cpp) and look at the output of
the script. Before this change, it correctly assigned the addition
of LLVMRemarkStreamer.cpp to 7531a5039f but incorrectly assigned
the removal of RemarkStreamer.cpp to b8a847c. With this, it
correctly assigns both to 7531a5039f.
Basically change the layout to please `go build` and remove references to
`llvm-go`.
Update llvm/test/Bindings/Go/ to use the system go compiler
Differential Revision: https://reviews.llvm.org/D74540
Tablegen's DAGISelMatcher emits integers in a VBR format,
so if an integer is below 128 it can fit into a single
byte, otherwise high bit is set, next byte is used etc.
MatcherTable is essentially an unsigned char table. When
SelectionDAGISel parses the table it does a reverse translation.
In a situation when numeric value of an integer to emit is
unknown it can be emitted not as OPC_EmitInteger but as
OPC_EmitStringInteger using a symbolic name of the value.
In this situation the value should not exceed 127.
One of the situations when OPC_EmitStringInteger is used is
if we need to emit a subreg into a matcher table. However,
number of subregs can exceed 127. Currently last defined subreg
for AMDGPU is 192. That results in a silent bug in the ISel
with matcher reading from an invalid offset.
Fixed this bug to emit actual VBR encoded value for a subregs
which value exceeds 127.
Differential Revision: https://reviews.llvm.org/D74368
Update test scripts were limited because they performed a single action
on the entire file and if that action was controlled by arguments, like
the one introduced in D68819, there was no record of it.
This patch introduces the capability of changing the arguments passed to
the script "on-the-fly" while processing a test file. In addition, an
"on/off" switch was added so that processing can be disabled for parts
of the file where the content is simply copied. The last extension is a
record of the invocation arguments in the auto generated NOTE. These
arguments are also picked up in a subsequent invocation, allowing
updates with special options enabled without user interaction.
To change the arguments the string `UTC_ARGS:` has to be present in a
line, followed by "additional command line arguments". That is
everything that follows `UTC_ARGS:` will be added to a growing list
of "command line arguments" which is reparsed after every update.
Reviewed By: arichardson
Differential Revision: https://reviews.llvm.org/D69701
Summary:
Simplifies the C++11-style "-> decltype(...)" return-type deduction.
Note that you have to be careful about whether the function return type
is `auto` or `decltype(auto)`. The difference is that bare `auto`
strips const and reference, just like lambda return type deduction. In
some cases that's what we want (or more likely, we know that the return
type is a value type), but whenever we're wrapping a templated function
which might return a reference, we need to be sure that the return type
is decltype(auto).
No functional change.
Subscribers: dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74383
On macOS, libc++ headers are distributed with the compiler, not
the sysroot. Without this, compiling a file that includes something
like <string> won't compile with gn-built clang without manual tweaks.
I used to do the manual tweaks, but now that other people are starting
to use this on mac, let's make it Just Work.
(This is marginally nicer than the cmake build now in that you can
just build 'clang' and it'll do the right thing.)
Differential Revision: https://reviews.llvm.org/D74247
Summary: Replace '-' in the error message with <stdin>. This is also consistent with another error message in the code.
Reviewers: jhenderson, probinson, jdenny, grimar, arichardson
Reviewed By: jhenderson
Subscribers: thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73793
Previously we were adding the CHECK lines to both definitions and
declarations. Update the JSON AST dump parsing code to skip all
FunctionDecls without an "inner" node (i.e. no body).
Reviewed By: MaskRay, greened
Differential Revision: https://reviews.llvm.org/D73708
Summary:
this patch makes tablegen generate llvm attributes in a more generic and simpler (at least to me).
changes: make tablegen generate
...
ATTRIBUTE_ENUM(Alignment,align)
ATTRIBUTE_ENUM(AllocSize,allocsize)
...
which can be used to generate most of what was previously used and more.
Tablegen was also generating attributes from 2 identical files leading to identical output. so I removed one of them and made user use the other.
Reviewers: jdoerfert, thakis, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72455
Summary:
this patch makes tablegen generate llvm attributes in a more generic and simpler (at least to me).
changes: make tablegen generate
...
ATTRIBUTE_ENUM(Alignment,align)
ATTRIBUTE_ENUM(AllocSize,allocsize)
...
which can be used to generate most of what was previously used and more.
Tablegen was also generating attributes from 2 identical files leading to identical output. so I removed one of them and made user use the other.
Reviewers: jdoerfert, thakis, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72455
This produces a seemingly-working dynamic (x64-only) asan dylib on macOS
and static libraries on Linux.
I've had this sitting in a branch for a long time and wanted to get
check-asan working before landing it, but smaller patches and fewer
local branches is probably better.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This changes the generated (Instr|Asm|Reg|Regclass)Name tables from this
form:
extern const char HexagonInstrNameData[] = {
/* 0 */ 'G', '_', 'F', 'L', 'O', 'G', '1', '0', 0,
/* 9 */ 'E', 'N', 'D', 'L', 'O', 'O', 'P', '0', 0,
/* 18 */ 'V', '6', '_', 'v', 'd', 'd', '0', 0,
/* 26 */ 'P', 'S', '_', 'v', 'd', 'd', '0', 0,
[...]
};
...to this:
extern const char HexagonInstrNameData[] = {
/* 0 */ "G_FLOG10\0"
/* 9 */ "ENDLOOP0\0"
/* 18 */ "V6_vdd0\0"
/* 26 */ "PS_vdd0\0"
[...]
};
This should make debugging and exploration a lot easier for mortals,
while providing a significant compile-time reduction for common compilers.
To avoid issues with low implementation limits, this is disabled by
default for visual studio.
To force output one way or the other, pass
`--long-string-literals=<bool>` to `tablegen`
Reviewers: mstorsjo, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D73044
A variation of this patch was originally committed in ce23515f5a and
then reverted in e464b31c due to build failures.
This previously only handled EXTRACT_SUBREGs from leafs, such as
operands directly in the original output. Handle extracting from a
result instruction.
This would hit the "Biggest class wasn't first" assert in
getMatchingSubClassWithSubRegs in a future patch for EXTRACT_SUBREG
handling.
Mips defines 4 identical register classes (MSA128B, MSA128H, MSA128BW,
MSA128D). These have the same set of registers, and only differ by the
isel type. I believe this is an ill formed way of defining registers,
that probably is just to work around the inconvenience of mixing
different types in a single register class in DAG patterns.
Since these all have the same size, they would all sort to the
beginning, but you would not necessarily get the same super register
at the front as the assert enforces. Breaking the ambiguity by also
sorting by name doesn't work, since each of these register classes all
want to be first. Force sorting of the original register class if the
size is the same.
This changes the generated (Instr|Asm|Reg|Regclass)Name tables from this
form:
extern const char HexagonInstrNameData[] = {
/* 0 */ 'G', '_', 'F', 'L', 'O', 'G', '1', '0', 0,
/* 9 */ 'E', 'N', 'D', 'L', 'O', 'O', 'P', '0', 0,
/* 18 */ 'V', '6', '_', 'v', 'd', 'd', '0', 0,
/* 26 */ 'P', 'S', '_', 'v', 'd', 'd', '0', 0,
[...]
};
...to this:
extern const char HexagonInstrNameData[] = {
/* 0 */ "G_FLOG10\0"
/* 9 */ "ENDLOOP0\0"
/* 18 */ "V6_vdd0\0"
/* 26 */ "PS_vdd0\0"
[...]
};
This should make debugging and exploration a lot easier for mortals,
while providing a significant compile-time reduction for common compilers.
To avoid issues with low implementation limits, this is disabled by
default for visual studio or when cross-compiling.
To force output one way or the other, pass
`--long-string-literals=<bool>` to `tablegen`
Reviewers: mstorsjo, rnk
Subscribers: llvm-commit
Differential Revision: https://reviews.llvm.org/D73044
As discussed on the mailing list, I plan to introduce an ml-compatible MASM assembler as part of providing more of the Windows build tools. This will be similar to llvm-mc, but with different command-line parameters.
This placeholder is purely a stripped-down version of llvm-mc; we'll eventually add support for the Microsoft-style command-line flags, and back it with a MASM parser.
Relanding this revision after fixing ARM-compatibility issues.
Reviewers: rnk, thakis, RKSimon
Reviewed By: thakis, RKSimon
Differential Revision: https://reviews.llvm.org/D72679
Summary:
As discussed on the mailing list, I plan to introduce an ml-compatible MASM assembler as part of providing more of the Windows build tools. This will be similar to llvm-mc, but with different command-line parameters.
This placeholder is purely a stripped-down version of llvm-mc; we'll eventually add support for the Microsoft-style command-line flags, and back it with a MASM parser.
Reviewers: rnk, thakis
Reviewed By: thakis
Subscribers: merge_guards_bot, mgorny, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72679
Summary:
In the DFAPacketizer we copy the Transitions array
into a map in order to later access the transitions
based on a "Current State/Action" pair as a key.
This map lives in the Automaton object used by the DFAPacketizer.
It is never changed during the life of the object after
having been created during the creation of the Automaton
itself.
This map creation can make the creation of a DFAPacketizer
quite expensive if the target contains a considerable
amount of transition states.
Considering that TableGen already generates a
sorted list of transitions by State/Action pairs
we could just use that directly in our Automaton
and search entries with std::lower_bound instead of copying
it in a map and paying the execution time and memory cost.
Reviewers: jmolloy, ThomasRaoux
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72682
Previously, the gn build would create VCSRevision.h / VCSVersion.h
files with some LLD_REVISION / LLVM_REVISION / CLANG_REVISION but
by default wouldn't add a dependency on .git/logs/HEAD so that
the step doesn't rerun after every branch switch or every pull.
That's bad for deterministic builds, and having --version print
some arbitrarily old revision isn't great either.
Instead, move to the model that the cmake build (now) uses fairly
consistently: If llvm_append_vc_rev is set, include the revision,
else don't.
Since the GN build is focused on developers, set llvm_append_vc_rev
to false instead of true by default (different from the cmake build),
so that things don't rebuild after every branch switch and every
pull.
While here, also remove some pre-monorepo code.
Differential Revision: https://reviews.llvm.org/D72859
r354605 moved LLD to the unified revision handling introduced in
rL353268 / r352729 and removed uses of LLD_REPOSITORY_STRING and
LLD_REVISION_STRING.
After this change, we no longer compute the (now-unused) values
of these two variables.
Since this removes the only use of llvm/utils/GetRepositoryPath,
remove that too (it's redundant with the system added in r354605).
While here, also remove LLD_VERSION_MAJOR and LLD_VERSION_MINOR.
Their uses were removed in r285163.
Also remove LLD_VERSION from Version.inc which as far as I can
tell has been unused since the file was added in r219277.
No behavior change.
Differential Revision: https://reviews.llvm.org/D72803
Ran `git ls-files '*.gn' '*.gni' | xargs llvm/utils/gn/gn.py format`.
The motivation is to reformat them with trunk gn again right after.
Trunk gn changed formatting of some single-element lists.
These return temporary Optional<> values which are immediately
destroyed. I'm not sure why no sanitizers seem to have caught this,
but I encountered crashes on these in a future patch.
The maps for dealing with the relationships between different register
classes and subregister indexes rely on unique pointers for every
class/index. By constructing a second copy of CodeGenRegBank, two
different pointer values existed for a given subregister depending on
where you were querying.
Use the existing CodeGenRegBank owned by the CodeGenTarget instead of
constructing a second copy. This avoids incorrectly failing map
lookups in a future change.
When using the option, draw the histogram representing the debug
location buckets. The resulting histogram will be saved in a png
file.
Differential Revision: https://reviews.llvm.org/D71869
LLVM GN Syncbot