For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
In order to properly implement these atomic we need one register more than other
binary atomics. It is used for storing result from comparing values in addition
to the one that is used for actual result of operation.
https://reviews.llvm.org/D71028
There are a couple of bugs with the sc, scs, ll, lld instructions expanding:
1. On R6 these instruction pack immediate offset into a 9-bit field. Now
if an immediate exceeds 9-bits assembler does not perform expansion and
just rejects such instruction.
2. On 64-bit non-PIC code if an operand is a symbol assembler generates
incorrect sequence of instructions. It uses R_MIPS_HI16 and R_MIPS_LO16
relocations and skips R_MIPS_HIGHEST and R_MIPS_HIGHER ones.
To solve these problems this patch:
- Introduces `mem_simm9_exp` to mark 9-bit memory immediate operands
which require expansion. Probably later all `mem_simm9` operands will be
able to migrate on `mem_simm9_exp` and we rename it to `mem_simm9`.
- Adds new `OPERAND_MEM_SIMM9` operand type and assigns it to the
`mem_simm9_exp`. That allows to know operand size in the `processInstruction`
method and decide whether we need to expand instruction.
- Adds `expandMem9Inst` method to expand instructions with 9-bit memory
immediate operand. This method just load immediate into a "base"
register used by origibal instruction:
sc $2, 256($sp) => addiu $1, $sp, 256
sc $2, 0($1)
- Fix `expandMem16Inst` to support a correct set of relocations for
symbol loading in case of 64-bit non-PIC code.
ll $12, symbol => lui $12, 0
R_MIPS_HIGHEST symbol
daddiu $12, $12, 0
R_MIPS_HIGHER symbol
dsll $12, $12, 16
daddiu $12, $12, 0
R_MIPS_HI16 symbol
dsll $12, $12, 16
ll $12, 0($12)
R_MIPS_LO16 symbol
- Fix `expandMem16Inst` to unify handling of 3 and 4 operands
instructions.
- Delete unused now `MipsTargetStreamer::emitSCWithSymOffset` method.
Task for next patches - implement expanding for other instructions use
`mem_simm9` operand and other `mem_simm##` operands.
Differential Revision: https://reviews.llvm.org/D70648
Introduce IntImmLeaf version of PatLeaf immZExt16 for 32-bit immediates.
Change immZExt16 with imm32ZExt16 for andi, ori and xori.
This keeps same behavior for SDAG and allows for GlobalISel selectImpl
to select 'G_CONSTANT imm' + G_AND, G_OR, G_XOR into ANDi, ORi, XORi,
respectively, when 32-bit imm satisfies imm32ZExt16 predicate: zero
extending 16 low bits of imm is equal to imm.
Large number of test changes comes from zero extending of small types
which is transformed into 'and' with bitmask in legalizer.
Differential Revision:https://reviews.llvm.org/D70185
Introduce IntImmLeaf version of PatLeaf immSExt16 for 32-bit immediates.
Change immSExt16 with imm32SExt16 for addiu.
This keeps same behavior for SDAG and allows for GlobalISel selectImpl
to select 'G_CONSTANT imm' + G_ADD into ADDIu when 32-bit imm satisfies
imm32SExt16 predicate: sign extending 16 low bits of imm is equal to imm.
Differential Revision: https://reviews.llvm.org/D70184
`saa` and `saad` are 32-bit and 64-bit store atomic add instructions.
memory[base] = memory[base] + rt
These instructions are available for "Octeon+" CPU. The patch adds support
for both instructions to MIPS assembler and diassembler and introduces new
CPU type - "octeon+".
Next patches will implement `.set arch=octeon+` directive and `AFL_EXT_OCTEONP`
ISA extension flag support.
Differential Revision: https://reviews.llvm.org/D69849
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
If result of 64-bit address loading combines with 32-bit mask, LLVM
tries to optimize the code and remove "redundant" loading of upper
32-bits of the address. It leads to incorrect code on MIPS64 targets.
MIPS backend creates the following chain of commands to load 64-bit
address in the `MipsTargetLowering::getAddrNonPICSym64` method:
```
(add (shl (add (shl (add %highest(sym), %higher(sym)),
16),
%hi(sym)),
16),
%lo(%sym))
```
If the mask presents, LLVM decides to optimize the chain of commands. It
really does not make sense to load upper 32-bits because the 0x0fffffff
mask anyway clears them. After removing redundant commands we get this
chain:
```
(add (shl (%hi(sym), 16), %lo(%sym))
```
There is no patterns matched `(MipsHi (i64 symbol))`. Due a bug in `SYM_32`
predicate definition, backend incorrectly selects a pattern for a 32-bit
symbols and uses the `lui` instruction for loading `%hi(sym)`.
As a result we get incorrect set of instructions with unnecessary 16-bit
left shifting:
```
lui at,0x0
R_MIPS_HI16 foo
dsll at,at,0x10
daddiu at,at,0
R_MIPS_LO16 foo
```
This patch resolves two problems:
- Fix `SYM_32/SYM_64` predicates to prevent selection of patterns dedicated
to 32-bit symbols in case of using N64 ABI.
- Add missed patterns for 64-bit symbols for `%hi/%lo`.
Fix PR42736.
Differential Revision: https://reviews.llvm.org/D66228
llvm-svn: 370268
There is no pattern matched `add hi, (MipsLo texternalsym)`. As a result,
loading an address of 32-bit symbol requires two registers and one more
additional instruction:
```
addiu $1, $zero, %lo(foo)
lui $2, %hi(foo)
addu $25, $2, $1
```
This patch adds the missed pattern and enables generation more effective
set of instructions:
```
lui $1, %hi(foo)
addiu $25, $1, %lo(foo)
```
Differential Revision: https://reviews.llvm.org/D66771
llvm-svn: 370196
The `sge/sgeu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than or equal `Src2/Imm` and
to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64314
llvm-svn: 365476
The `sgt/sgtu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than `Src2/Imm` and to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64313
llvm-svn: 365475
To provide mapping between standard and microMIPS R6 variants of the
`sw` command we have to rename SWSP_xxx commands from "sw" to "swsp".
Otherwise `tablegen` starts to show the error `Multiple matches found
for `SW'`. After that to restore printing SWSP command as `sw`, I add
an appropriate `MipsInstAlias` instance.
We also need to implement "size reduction" for microMIPS R6. But this
task is for separate patch. After that the `micromips-lwsp-swsp.ll` test
case will be extended.
Differential Revision: http://reviews.llvm.org/D59046
llvm-svn: 356045
Instruction abs.[ds] is not generating correct result when working
with NaNs for revisions prior mips32r6 and mips64r6.
To generate a sequence which always produce a correct result, but also
to allow user more control on how his code is compiled, attribute
+abs2008 is added, so user can choose legacy or 2008.
By default legacy mode is used on revisions prior R6. Mips32r6 and
mips64r6 use abs2008 mode by default.
Differential Revision: https://reviews.llvm.org/D35983
llvm-svn: 352370
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The callee address is added as an optional operand (MCSymbol) in
AdjustInstrPostInstrSelection() and then used by asm printer to insert:
'.reloc tmplabel, R_MIPS_JALR, symbol
tmplabel:'.
Controlled with '-mips-jalr-reloc', default is true.
Differential revision: https://reviews.llvm.org/D56694
llvm-svn: 351485
Expand on LONG_BRANCH_LUi and LONG_BRANCH_(D)ADDiu pseudo
instructions by creating variants which support
less operands/accept GPR64Opnds as their operand in order
to appease the machine verifier pass.
Differential Revision: https://reviews.llvm.org/D53977
llvm-svn: 346133
For the final DTPREL addition, rather than a lui/daddiu/daddu triple,
LLVM was erronously emitting a daddiu/daddiu pair, treating the %dtprel_hi
as if it were a %dtprel_lo, since Mips::Hi expands unshifted for Sym64.
Instead, use a new TlsHi node and, although unnecessary due to the exact
structure of the nodes emitted, use TlsHi for local exec too to prevent
future bugs. Also garbage-collect the unused TprelLo and TlsGd nodes,
and TprelHi since its functionality is provided by the new common TlsHi node.
Patch by James Clarke.
Differential revision: https://reviews.llvm.org/D49259
llvm-svn: 337827
This is a follow-up to the rL335185. Those commit adds some WrapperPat
patterns for microMIPS target. But declaration of the WrapperPat class
is under the NotInMicroMips predicate and microMIPS patterns cannot be
selected because predicate (Subtarget->inMicroMipsMode()) &&
(!Subtarget->inMicroMipsMode()) is always false.
This change move out the WrapperPat class declaration from the
NotInMicroMips predicate and enables microMIPS WrapperPat patterns.
Differential revision: https://reviews.llvm.org/D49533
llvm-svn: 337646
Instead, the pattern is tagged with the correct predicate when
it is declared. Some patterns have been duplicated as necessary.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D48365
llvm-svn: 337171
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the stores can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This version addresses issues with the initial implementation and covers
all atomic operations.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Patch By: Simon Dardis
Differential Revision: https://reviews.llvm.org/D31287
llvm-svn: 336328
These are identical but use microMIPS instructions instead of MIPS instructions.
Also, flatten the 'let AdditionalPredicates = [InMicroMips]' by using the
ISA_MICROMIPS adjective. Add tests for constant materialization.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D48275
llvm-svn: 335185
As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
Kazuaki Ishizaki