Summary:
Folding patterns like:
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%ext = extractelement <4 x i8> %insvec, i32 0
%cond = icmp eq i32 %ext, 0
Combined with existing rules, this allows us to fold patterns like:
%insvec = insertelement <4 x i8> undef, i8 %val, i32 0
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%cond = icmp eq i8 %val, 0
When we construct a splat vector via a shuffle, and bitcast the vector into an integer type for comparison against an integer constant. Then we can simplify the the comparison to compare the splatted value against the integer constant.
Reviewers: spatel, anna, mkazantsev
Reviewed By: spatel
Subscribers: efriedma, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D44997
llvm-svn: 329087
Summary:
If the load/extractelement/extractvalue instructions are not originally
consecutive, the SLP vectorizer is unable to vectorize them. Patch
allows reordering of such instructions.
Patch does not support reordering of the repeated instruction, this must
be handled in the separate patch.
Reviewers: RKSimon, spatel, hfinkel, mkuper, Ayal, ashahid
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43776
llvm-svn: 329085
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
The primary issue here is that using NDEBUG alone isn't enough to guard
debug printing -- instead the DEBUG() macro needs to be used so that the
specific pass debug logging check is employed. Without this, every
asserts-enabled build was printing out information when it hit this.
I also fixed another place where we had multiple statements in a DEBUG
macro to use {}s to be a bit cleaner. And I fixed a place that used
errs() rather than dbgs().
llvm-svn: 329082
I have taken the opportunity to simplify some tests slightly and move
parts around.
It also brings back a few IR checks for interchangable loops.
Reviewers: karthikthecool, sebpop, grosser
Reviewed By: sebpop
Differential Revision: https://reviews.llvm.org/D45207
llvm-svn: 329081
This should fix the problem reported by the lld buildbots:
- Builder lld-x86_64-darwin13, Build #19782
- Builder lld-perf-testsuite, Build #1419
llvm-svn: 329068
This patch allows the description of register files in processor scheduling
models. This addresses PR36662.
A new tablegen class named 'RegisterFile' has been added to TargetSchedule.td.
Targets can optionally describe register files for their processors using that
class. In particular, class RegisterFile allows to specify:
- The total number of physical registers.
- Which target registers are accessible through the register file.
- The cost of allocating a register at register renaming stage.
Example (from this patch - see file X86/X86ScheduleBtVer2.td)
def FpuPRF : RegisterFile<72, [VR64, VR128, VR256], [1, 1, 2]>
Here, FpuPRF describes a register file for MMX/XMM/YMM registers. On Jaguar
(btver2), a YMM register definition consumes 2 physical registers, while MMX/XMM
register definitions only cost 1 physical register.
The syntax allows to specify an empty set of register classes. An empty set of
register classes means: this register file models all the registers specified by
the Target. For each register class, users can specify an optional register
cost. By default, register costs default to 1. A value of 0 for the number of
physical registers means: "this register file has an unbounded number of
physical registers".
This patch is structured in two parts.
* Part 1 - MC/Tablegen *
A first part adds the tablegen definition of RegisterFile, and teaches the
SubtargetEmitter how to emit information related to register files.
Information about register files is accessible through an instance of
MCExtraProcessorInfo.
The idea behind this design is to logically partition the processor description
which is only used by external tools (like llvm-mca) from the processor
information used by the llvm machine schedulers.
I think that this design would make easier for targets to get rid of the extra
processor information if they don't want it.
* Part 2 - llvm-mca related *
The second part of this patch is related to changes to llvm-mca.
The main differences are:
1) class RegisterFile now needs to take into account the "cost of a register"
when allocating physical registers at register renaming stage.
2) Point 1. triggered a minor refactoring which lef to the removal of the
"maximum 32 register files" restriction.
3) The BackendStatistics view has been updated so that we can print out extra
details related to each register file implemented by the processor.
The effect of point 3. is also visible in tests register-files-[1..5].s.
Differential Revision: https://reviews.llvm.org/D44980
llvm-svn: 329067
fact use regular expression syntax to use regular expressions.
Should restore the bots. Sorry for the noise on this test.
Thanks to Philip for spotting the bug!
llvm-svn: 329057
This adds the basic test cases from all the EFLAGS bugs in more direct
forms. It also switches to generated check lines, and includes both
32-bit and 64-bit variations.
No functionality changing here, just setting things up to have a nice
clean asm diff in my EFLAGS patch.
llvm-svn: 329056
do explicit scrubbing of the offsets of stack spills and reloads.
You can always turn this off in order to test specific stack slot usage.
We were already hiding most of this, but the new logic hides it more
generically. Notably, we should effectively hide stack slot churn in
functions that have a frame pointer now, and should also hide it when
changing a function from stack pointer to frame pointer. That transition
already changes enough to be clearly noticed in the test case diff,
showing *every* spill and reload is really noisy without benefit. See
the test case I ran this on as a classic example.
llvm-svn: 329055
The default assembly handling mode may introduce false positives in the
cases when MSan doesn't understand that the assembly call initializes
the memory pointed to by one of its arguments.
We introduce the conservative mode, which initializes the first
|sizeof(type)| bytes for every |type*| pointer passed into the
assembly statement.
llvm-svn: 329054
The patch changes the usage of dominate to properlyDominate
to satisfy the condition !(a < a) while using std::max.
It is actually NFC due to set data structure is used to keep
the Loops and no two identical loops can be in collection.
So in reality there is no difference between usage of
dominate and properlyDominate in this particular case.
However it might be changed so it is better to fix it.
llvm-svn: 329051
Useful when looking for indirect calls/jmps the need mitigation
via retpoline or other mitigations for Spectre v2.
Feedback, extension, additional patches welcome.
llvm-svn: 329050
Current implementation of `computeExitLimit` has a big piece of code
the only purpose of which is to prove that after the execution of this
block the latch will be executed. What it currently checks is actually a
subset of situations where the exiting block dominates latch.
This patch replaces all these checks for simple particular cases with
domination check over loop's latch which is the only necessary condition
of taking the exiting block into consideration. This change allows to
calculate exact loop taken count for simple loops like
for (int i = 0; i < 100; i++) {
if (cond) {...} else {...}
if (i > 50) break;
. . .
}
Differential Revision: https://reviews.llvm.org/D44677
Reviewed By: efriedma
llvm-svn: 329047
The primary issue here is that using NDEBUG alone isn't enough to guard
debug printing -- instead the DEBUG() macro needs to be used so that the
specific pass debug logging check is employed. Without this, every
asserts-enabled build was printing out information when it hit this.
I also fixed another place where we had multiple statements in a DEBUG
macro to use {}s to be a bit cleaner. And I fixed a place that used
`errs()` rather than `dbgs()`.
llvm-svn: 329046
Commit 37962a331c77 ("bpf: Improve expanding logic in LowerSELECT_CC")
intended to improve code quality for certain jmp conditions. The
commit, however, has a couple of issues:
(1). In code, just swap is not enough, ConditionalCode CC
should also be swapped, otherwise incorrect code will
be generated.
(2). The ConditionalCode swap should be subject to
getHasJmpExt(). If getHasJmpExt() is False, certain
conditional codes will not be supported and swap
may generate incorrect code.
The original goal for this patch is to optimize jmp operations
which does not have JmpExt turned on. If JmpExt is on,
better code could be generated. For example, the test
select_ri.ll is introduced to demonstrate the optimization.
The same result can be achieved with -mcpu=v2 flag.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 329043
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 329042
Just adds basic block labels and tidies up where comments go in the test
case and then generates fresh CHECK lines with the script. This way, the
check lines are much easier to maintain. They were already close to this
but not quite there.
llvm-svn: 329040
Only rely on Python 3 (io.open) when necessary. This puts TestRunnyer.py closer to how it behaved
before the changes introduced in D43165 and silences a few Windows build bot failures.
Thanks to Stella Stamenova for the patch!
llvm-svn: 329037
We use two approaches for determining the minimum bitwidth.
* Demanded bits
* Value tracking
If demanded bits doesn't result in a narrower type, we then try value tracking.
We need this if we want to root SLP trees with the indices of getelementptr
instructions since all the bits of the indices are demanded.
But there is a missing piece though. We need to be able to distinguish "demanded
and shrinkable" from "demanded and not shrinkable". For example, the bits of %i
in
%i = sext i32 %e1 to i64
%gep = getelementptr inbounds i64, i64* %p, i64 %i
are demanded, but we can shrink %i's type to i32 because it won't change the
result of the getelementptr. On the other hand, in
%tmp15 = sext i32 %tmp14 to i64
%tmp16 = insertvalue { i64, i64 } undef, i64 %tmp15, 0
it doesn't make sense to shrink %tmp15 and we can skip the value tracking.
Ideas are from Matthew Simpson!
Differential Revision: https://reviews.llvm.org/D44868
llvm-svn: 329035
Summary:
When attempting to split a coroutine with 'hidden' visibility (for
example, a C++ coroutine that is inlined when compiled with the option
'-fvisibility-inlines-hidden'), LLVM would hit an assertion in
include/llvm/IR/GlobalValue.h:240: "local linkage requires default
visibility". The issue is that the visibility is copied from the source
of the function split in the `CloneFunctionInto` function, but the linkage
is not. To fix, create the new function first with external linkage,
then copy the linkage from the original function *after* `CloneFunctionInto`
is called.
Since `GlobalValue::setLinkage` in turn calls `maybeSetDsoLocal`, the
explicit call to `setDSOLocal` can be removed in CoroSplit.cpp.
Test Plan: check-llvm
Reviewers: GorNishanov, lewissbaker, EricWF, majnemer, rnk
Reviewed By: rnk
Subscribers: llvm-commits, eric_niebler
Differential Revision: https://reviews.llvm.org/D44185
llvm-svn: 329033
Summary:
The cast simplifications that instcombine does here do not make any
attempt to obey the verifier rules for musttail calls. Therefore we have
to disable them.
Reviewers: efriedma, majnemer, pcc
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45186
llvm-svn: 329027
Reapply D43165 which was reverted because of different versions of python failing.
The one line fix for the different python versions was commited at the same time
that D43165 was reverted. If this change is giving you issues then get in touch
with your python version and we will fix it.
llvm-svn: 329022
Summary:
This issue was found when running the clang unit test on Windows. Python 3.x cannot open some of the files that the tests are using with a simple open because of their encoding. Python 2.7+ and Python 3.x both support io.open which allows for an encoding to be specified.
This change will determine whether two files being compared should be opened (and then compared) as text or binary and whether to use utf-8 or the default encoding before proceeding with a line-by-line comparison.
Patch by Stella Stamenova!
Reviewers: zturner, llvm-commits, rnk, MaggieYi
Reviewed By: zturner
Subscribers: asmith, MatzeB, stella.stamenova, delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D43165
llvm-svn: 329012
Daniel Neilson