Coverage instrumentation which does not instrument full post-dominators
and full-dominators may skip valid paths, as the reasoning for skipping
blocks may become circular.
This patch fixes that, by only skipping
full post-dominators with multiple predecessors, as such predecessors by
definition can not be full-dominators.
llvm-svn: 303827
Coverage instrumentation has an optimization not to instrument extra
blocks, if the pass is already "accounted for" by a
successor/predecessor basic block.
However (https://github.com/google/sanitizers/issues/783) this
reasoning may become circular, which stops valid paths from having
coverage.
In the worst case this can cause fuzzing to stop working entirely.
This change simplifies logic to something which trivially can not have
such circular reasoning, as losing valid paths does not seem like a
good trade-off for a ~15% decrease in the # of instrumented basic blocks.
llvm-svn: 303698
It turned out that MSan was incorrectly calculating the shadow for int comparisons: it was done by truncating the result of (Shadow1 OR Shadow2) to i1, effectively rendering all bits except LSB useless.
This approach doesn't work e.g. in the case where the values being compared are even (i.e. have the LSB of the shadow equal to zero).
Instead, if CreateShadowCast() has to cast a bigger int to i1, we replace the truncation with an ICMP to 0.
This patch doesn't affect the code generated for SPEC 2006 binaries, i.e. there's no performance impact.
For the test case reported in PR32842 MSan with the patch generates a slightly more efficient code:
orq %rcx, %rax
jne .LBB0_6
, instead of:
orl %ecx, %eax
testb $1, %al
jne .LBB0_6
llvm-svn: 302787
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a second re-land of r298158. This time, this feature is
limited to -fdata-sections builds.
llvm-svn: 301587
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
This is a second re-land of r298756. This time with a flag to disable
the whole thing to avoid a bug in the gold linker:
https://sourceware.org/bugzilla/show_bug.cgi?id=19002
llvm-svn: 301586
The DWARF specification knows 3 kinds of non-empty simple location
descriptions:
1. Register location descriptions
- describe a variable in a register
- consist of only a DW_OP_reg
2. Memory location descriptions
- describe the address of a variable
3. Implicit location descriptions
- describe the value of a variable
- end with DW_OP_stack_value & friends
The existing DwarfExpression code is pretty much ignorant of these
restrictions. This used to not matter because we only emitted very
short expressions that we happened to get right by accident. This
patch makes DwarfExpression aware of the rules defined by the DWARF
standard and now chooses the right kind of location description for
each expression being emitted.
This would have been an NFC commit (for the existing testsuite) if not
for the way that clang describes captured block variables. Based on
how the previous code in LLVM emitted locations, DW_OP_deref
operations that should have come at the end of the expression are put
at its beginning. Fixing this means changing the semantics of
DIExpression, so this patch bumps the version number of DIExpression
and implements a bitcode upgrade.
There are two major changes in this patch:
I had to fix the semantics of dbg.declare for describing function
arguments. After this patch a dbg.declare always takes the *address*
of a variable as the first argument, even if the argument is not an
alloca.
When lowering a DBG_VALUE, the decision of whether to emit a register
location description or a memory location description depends on the
MachineLocation — register machine locations may get promoted to
memory locations based on their DIExpression. (Future) optimization
passes that want to salvage implicit debug location for variables may
do so by appending a DW_OP_stack_value. For example:
DBG_VALUE, [RBP-8] --> DW_OP_fbreg -8
DBG_VALUE, RAX --> DW_OP_reg0 +0
DBG_VALUE, RAX, DIExpression(DW_OP_deref) --> DW_OP_reg0 +0
All testcases that were modified were regenerated from clang. I also
added source-based testcases for each of these to the debuginfo-tests
repository over the last week to make sure that no synchronized bugs
slip in. The debuginfo-tests compile from source and run the debugger.
https://bugs.llvm.org/show_bug.cgi?id=32382
<rdar://problem/31205000>
Differential Revision: https://reviews.llvm.org/D31439
llvm-svn: 300522
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a re-land of r298158 rebased on D31358. This time,
asan.module_ctor is put in a comdat as well to avoid quadratic
behavior in Gold.
llvm-svn: 299697
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
This is a rebase of r298756.
llvm-svn: 299696
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
This is a rebase of r298731 which was reverted due to a false alarm.
llvm-svn: 299695
When possible, put ASan ctor/dtor in comdat.
The only reason not to is global registration, which can be
TU-specific. This is not the case when there are no instrumented
globals. This is also limited to ELF targets, because MachO does
not have comdat, and COFF linkers may GC comdat constructors.
The benefit of this is a lot less __asan_init() calls: one per DSO
instead of one per TU. It's also necessary for the upcoming
gc-sections-for-globals change on Linux, where multiple references to
section start symbols trigger quadratic behaviour in gold linker.
llvm-svn: 298756
Create the constructor in the module pass.
This in needed for the GC-friendly globals change, where the constructor can be
put in a comdat in some cases, but we don't know about that in the function
pass.
llvm-svn: 298731
This prevents crashes when attempting to instrument functions containing
C++ try.
Sanitizer coverage will still fail at runtime when an exception is
thrown through a sancov instrumented function, but that seems marginally
better than what we have now. The full solution is to color the blocks
in LLVM IR and only instrument blocks that have an unambiguous color,
using the appropriate token.
llvm-svn: 298662
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
Differential Revision: https://reviews.llvm.org/D30121
llvm-svn: 298158
This patch adds the value profile support to profile the size parameter of
memory intrinsic calls: memcpy, memcmp, and memmov.
Differential Revision: http://reviews.llvm.org/D28965
llvm-svn: 297897
They are register promoted by ISel and so it makes no sense to treat them as
memory.
Inserting calls to the thread sanitizer would also generate invalid IR.
You would hit:
"swifterror value can only be loaded and stored from, or as a swifterror
argument!"
llvm-svn: 295230
They are register promoted by ISel and so it makes no sense to treat them as
memory.
Inserting calls to the thread sanitizer would also generate invalid IR.
You would hit:
"swifterror value can only be loaded and stored from, or as a swifterror
argument!"
llvm-svn: 295215
This reverts 295092 (re-applies 295084), with a fix for dangling
references from the array of coverage names passed down from frontends.
I missed this in my initial testing because I only checked test/Profile,
and not test/CoverageMapping as well.
Original commit message:
The profile name variables passed to counter increment intrinsics are dead
after we emit the finalized name data in __llvm_prf_nm. However, we neglect to
erase these name variables. This causes huge size increases in the
__TEXT,__const section as well as slowdowns when linker dead stripping is
disabled. Some affected projects are so massive that they fail to link on
Darwin, because only the small code model is supported.
Fix the issue by throwing away the name constants as soon as we're done with
them.
Differential Revision: https://reviews.llvm.org/D29921
llvm-svn: 295099
The profile name variables passed to counter increment intrinsics are
dead after we emit the finalized name data in __llvm_prf_nm. However, we
neglect to erase these name variables. This causes huge size increases
in the __TEXT,__const section as well as slowdowns when linker dead
stripping is disabled. Some affected projects are so massive that they
fail to link on Darwin, because only the small code model is supported.
Fix the issue by throwing away the name constants as soon as we're done
with them.
Differential Revision: https://reviews.llvm.org/D29921
llvm-svn: 295084
Other than on COFF with incremental linking, global metadata should
not need any extra alignment.
Differential Revision: https://reviews.llvm.org/D28628
llvm-svn: 291859
When using profiling and ASan together (-fprofile-instr-generate -fcoverage-mapping -fsanitize=address), at least on Darwin, the section of globals that ASan emits (__asan_globals) is misaligned and starts at an odd offset. This really doesn't have anything to do with profiling, but it triggers the issue because profiling emits a string section, which can have arbitrary size. This patch changes the alignment to sizeof(GlobalStruct).
Differential Revision: https://reviews.llvm.org/D28573
llvm-svn: 291715
George Karpenkov