Summary:
Control flow guard works best when targets it checks are 16-byte aligned.
Microsoft's link.exe helps ensure this by aligning code from sections
that are referenced from the gfids table to 16 bytes when linking with
-guard:cf, even if the original section specifies a smaller alignment.
This change implements that behavior in lld-link.
See https://crbug.com/857012 for more details.
Reviewers: ruiu, hans, thakis, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48690
llvm-svn: 335864
`lld-link foo.lib /wholearchive:foo.lib` should work the same way as
`lld-link /wholearchive:foo.lib foo.lib`. Previously, /wholearchive in
the former case was ignored.
Differential Revision: https://reviews.llvm.org/D47565
llvm-svn: 334552
When running with linker GC (`-opt:ref`), defined imported symbols that
are referenced but then dropped by GC end up with their `Location`
member being nullptr, which means `getChunk()` returns nullptr for them
and attempting to call `getChunk()->getOutputSection()` causes a crash
from the nullptr dereference. Check for `getChunk()` being nullptr and
bail out early to avoid the crash.
Differential Revision: https://reviews.llvm.org/D48092
llvm-svn: 334548
If building lld without x86 support, tests that require that support should
be treated as unsupported, not errors.
Tested using:
1. cmake '-DLLVM_TARGETS_TO_BUILD=AArch64;X86'
make check-lld
=>
Expected Passes : 1406
Unsupported Tests : 287
2. cmake '-DLLVM_TARGETS_TO_BUILD=AArch64'
make check-lld
=>
Expected Passes : 410
Unsupported Tests : 1283
Patch by Joel Jones
Differential Revision: https://reviews.llvm.org/D47748
llvm-svn: 334095
Rather than using a loop to compare symbol RVAs to the starting RVAs of
sections to determine which section a symbol belongs to, just get the
output section of a symbol directly via its chunk, and bail if the
symbol doesn't have an output section, which avoids having to hardcode
logic for handling dead symbols, CodeView symbols, etc. This was
suggested by Reid Kleckner; thank you.
This also fixes writing out symbol tables in the presence of RVA table
input sections (e.g. .sxdata and .gfids). Such sections aren't written
to the output file directly, so their RVA is 0, and the loop would thus
fail to find an output section for them, resulting in a segfault. Extend
some existing tests to cover this case.
Fixes PR37584.
Differential Revision: https://reviews.llvm.org/D47391
llvm-svn: 333450
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
llvm-svn: 332664
Previously we would always write a hash of the binary into the
PE file, for reproducible builds. This breaks AppCompat, which
is a feature of Windows that relies on the timestamp in the PE
header being set to a real value (or at the very least, a value
that satisfies certain properties).
To address this, we put the old behavior of writing the hash
behind the /Brepro flag, which mimics MSVC linker behavior. We
also match MSVC default behavior, which is to write an actual
timestamp to the PE header. Finally, we add the /TIMESTAMP
option (an lld extension) so that the user can specify the exact
value to be used in case he/she manually constructs a value which
is both reproducible and satisfies AppCompat.
Differential Revision: https://reviews.llvm.org/D46966
llvm-svn: 332613
This is needed to avoid merging two functions with identical
instructions but different xdata. It also reduces binary size by
deduplicating identical pdata sections.
Fixes PR35337.
Differential Revision: https://reviews.llvm.org/D46672
llvm-svn: 332169
We discovered (crbug.com/838449#c24) that string tail merging can
negatively affect compressed binary size, so provide a flag to turn
it off for users who care more about compressed size than uncompressed
size.
Differential Revision: https://reviews.llvm.org/D46780
llvm-svn: 332149
Previously this was only supported when specified on the command line
or in directives.
Differential Revision: https://reviews.llvm.org/D46244
llvm-svn: 331900
Now only IMAGE_REL_ARM64_ABSOLUTE and IMAGE_REL_ARM64_TOKEN
are unhandled.
Also add range checks for the existing BRANCH26 relocation.
Differential Revision: https://reviews.llvm.org/D46354
llvm-svn: 331505
This is what link.exe does and lets us avoid needing to worry about
merging output characteristics while adding input sections to output
sections.
With this change we can't process /merge in the same way as before
because sections with different output characteristics can still
be merged into one another. So this change moves the processing of
/merge to just before we assign addresses. In the case where there
are multiple output sections with the same name, link.exe only merges
the first section with the source name into the first section with
the target name, and we do the same.
At the same time I also implemented transitive merging (which means
that /merge:.c=.b /merge:.b=.a merges both .c and .b into .a).
This isn't quite enough though because link.exe has a special case for
.CRT in 32-bit mode: it processes sections whose output characteristics
are DATA | R | W as though the output characteristics were DATA | R
(so that they get merged into things like constructor lists in the
expected way). Chromium has a few such sections, and it turns out
that those sections were causing the problem that resulted in r318699
(merge .xdata into .rdata) being reverted: because of the previous
permission merging semantics, the .CRT sections were causing the entire
.rdata section to become writable, which caused the SEH runtime to
crash because it apparently requires .xdata to be read-only. This
change also implements the same special case.
This should unblock being able to merge .xdata into .rdata by default,
as well as .bss into .data, both of which will be done in followups.
Differential Revision: https://reviews.llvm.org/D45801
llvm-svn: 330479
Part of the DBI stream is a list of variable length structures
describing each module that contributes to the final executable.
One member of this structure is a section contribution entry that
describes the first section contribution in the output file for
the given module.
We have been leaving this structure unpopulated until now, so with
this patch it is now filled out correctly.
Differential Revision: https://reviews.llvm.org/D45832
llvm-svn: 330457
Summary:
DLLs and executables with no exception handlers need to be marked with
IMAGE_DLL_CHARACTERISTICS_NO_SEH, even if they have a load config.
Discovered here when building Chromium with LLD on Windows:
https://crbug.com/833951
Reviewers: ruiu, mstorsjo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45778
llvm-svn: 330300
Summary:
This change does three things:
- Try to find the file and line number of an undefined symbol
reference by reading codeview debug info.
- Try to find the name of the function or global variable with the
undefined symbol reference by searching the object file's symbol
table.
- Prints the information in the same style as the ELF linker.
Differential Revision: https://reviews.llvm.org/D45467
llvm-svn: 330235
In this reland I removed an unnecessary use of /debug in the test
delayimports32.test and used the /pdbaltpath flag in the test
pdb-publics-import.test, both of which avoid embedding absolute PDB
paths in executables which could affect later RVAs.
Original commit message:
> COFF: Merge .idata, .didat and .edata into .rdata by default.
>
> This saves a little space and matches what link.exe does.
>
> Tested using the chromium Windows trybots:
> https://chromium-review.googlesource.com/c/chromium/src/+/1014784
Differential Revision: https://reviews.llvm.org/D45737
llvm-svn: 330233
I needed to revert r330223 because we were embedding an absolute PDB
path in the .rdata section, which ended up being laid out before the
.idata section and affecting its RVAs. This flag will let us control
the embedded path.
Differential Revision: https://reviews.llvm.org/D45747
llvm-svn: 330232
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
One place where this seems to matter is to make sure the .rsrc section comes
after .text. The Win32 UpdateResource() function can change the contents of
.rsrc. It will move the sections that come after, but if .text gets moved, the
entry point header will not get updated and the executable breaks. This was
found by a test in Chromium.
Differential Revision: https://reviews.llvm.org/D45260
llvm-svn: 329221
/FIXED:NO is always the default, so that part needs no work.
Also test the interaction of /ORDER: with /INCREMENTAL.
https://reviews.llvm.org/D45091
llvm-svn: 328877
As of rL215127, FileCheck has an -allow-empty flag,
so this could be used instead of writing a dummy line.
But it looks like the log is never empty now, so not
even that is needed.
llvm-svn: 328862
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
llvm-svn: 328812
This was reverted several times due to what ultimately turned out
to be incompatibilities in our serialized hash table format.
Several changes went in prior to this to fix those issues since
they were more fundamental and independent of supporting injected
sources, so now that those are fixed this change should hopefully
pass.
llvm-svn: 328363
When investigating bugs in PDB generation, the first step is
often to do the same link with link.exe and then compare PDBs.
But comparing PDBs is hard because two completely different byte
sequences can both be correct, so it hampers the investigation when
you also have to spend time figuring out not just which bytes are
different, but also if the difference is meaningful.
This patch fixes a couple of cases related to string table emission,
hash table emission, and the order in which we emit strings that
makes more of our bytes the same as the bytes generated by MS PDBs.
Differential Revision: https://reviews.llvm.org/D44810
llvm-svn: 328348
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
llvm-svn: 328014
Bob Haarman