If we have common uses on separate paths in the tree; process the one with greater common depth first.
This makes sure that we do not assume we need to extract a load when it is actually going to be part of a vectorized tree.
Review: http://reviews.llvm.org/D3800
llvm-svn: 210310
This patch adds support to vectorize intrinsics such as powi, cttz and ctlz in Vectorizer. These intrinsics are different from other
intrinsics as second argument to these function must be same in order to vectorize them and it should be represented as a scalar.
Review: http://reviews.llvm.org/D3851#inline-32769 and http://reviews.llvm.org/D3937#inline-32857
llvm-svn: 209873
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
llvm-svn: 209577
The cost model conservatively assumes that it will always get scalarized and
that's about as good as we can get with the generic TTI; reasoning whether a
shuffle with an efficient lowering is available is hard. We can override that
conservative estimate for some targets in the future.
llvm-svn: 209125
There is no total ordering if the CFG is disconnected. We don't care if we
catch all CSE opportunities in dead code either so just exclude ignore them in
the assert.
PR19646
llvm-svn: 208461
When can't assume a vectorized tree is rooted in an instruction. The IRBuilder
could have constant folded it. When we rebuild the build_vector (the series of
InsertElement instructions) use the last original InsertElement instruction. The
vectorized tree root is guaranteed to be before it.
Also, we can't assume that the n-th InsertElement inserts the n-th element into
a vector.
This reverts r207746 which reverted the revert of the revert of r205018 or so.
Fixes the test case in PR19621.
llvm-svn: 207939
=[
Turns out that this was the root cause of PR19621. We found a crasher
only recently (likely due to improvements elsewhere in the SLP
vectorizer) but the reduced test case failed all the way back to here.
I've confirmed that reverting this patch both fixes the reduced test
case in PR19621 and the actual source file that led to it, so it seems
to really be rooted here. I've replied to the commit thread with
discussion of my (feeble) attempts to debug this. Didn't make it very
far, so reverting now that we have a good test case so that things can
get back to healthy while the debugging carries on.
llvm-svn: 207746
Some Intrinsics are overloaded to the extent that return type equality (all
that's been checked up to now) does not guarantee that the arguments are the
same. In these cases SLP vectorizer should not recurse into the operands, which
can be achieved by comparing them as "Function *" rather than simply the ID.
llvm-svn: 205424
This reverts commit r205018.
Conflicts:
lib/Transforms/Vectorize/SLPVectorizer.cpp
test/Transforms/SLPVectorizer/X86/insert-element-build-vector.ll
This is breaking libclc build.
llvm-svn: 205260
This reverts commit r200576. It broke 32-bit self-host builds by
vectorizing two calls to @llvm.bswap.i64, which we then fail to expand.
llvm-svn: 200602
transform accordingly. Based on similar code from Loop vectorization.
Subsequent commits will include vectorization of function calls to
vector intrinsics and form function calls to vector library calls.
Patch by Raul Silvera! (Much delayed due to my not running dcommit)
llvm-svn: 200576
We were creating external uses for scalar values in MustGather entries that also
had a ScalarToTreeEntry (they also are present in a vectorized tuple). This
meant we would keep a value 'alive' as a scalar and vectorized causing havoc.
This is not necessary because when we create a MustGather vector we explicitly
create external uses entries for the insertelement instructions of the
MustGather vector elements.
Fixes PR18129.
radar://15582184
llvm-svn: 196508
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.
Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.
llvm-svn: 196294
we generate PHI nodes with multiple entries from the same basic block but
with different values. Enabling CSE on ExtractElement instructions make sure
that all of the RAUWed instructions are the same.
llvm-svn: 195773
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
llvm-svn: 195504
By vectorizing a series of srl, or, ... instructions we have obfuscated the
intention so much that the backend does not know how to fold this code away.
radar://15336950
llvm-svn: 193573
Before this patch we relied on the order of phi nodes when we looked for phi
nodes of the same type. This could prevent vectorization of cases where there
was a phi node of a second type in between phi nodes of some type.
This is important for vectorization of an internal graphics kernel. On the test
suite + external on x86_64 (and on a run on armv7s) it showed no impact on
either performance or compile time.
radar://15024459
llvm-svn: 192537
Sort the operands of the other entries in the current vectorization root
according to the first entry's operands opcodes.
%conv0 = uitofp ...
%load0 = load float ...
= fmul %conv0, %load0
= fmul %load0, %conv1
= fmul %load0, %conv2
Make sure that we recursively vectorize <%conv0, %conv1, %conv2> and <%load0,
%load0, %load0>.
This makes it more likely to obtain vectorizable trees. We have to be careful
when we sort that we don't destroy 'good' existing ordering implied by source
order.
radar://15080067
llvm-svn: 191977
This recursively strips all GEPs like the existing code. It also handles bitcasts and
other operations that do not change the pointer value.
llvm-svn: 191847
Inspired by the object from the SLPVectorizer. This found a minor bug in the
debug loc restoration in the vectorizer where the location of a following
instruction was attached instead of the location from the original instruction.
llvm-svn: 191673
We were previously using getFirstInsertionPt to insert PHI
instructions when vectorizing, but getFirstInsertionPt also skips past
landingpads, causing this to generate invalid IR.
We can avoid this issue by using getFirstNonPHI instead.
llvm-svn: 191526
Put them under a separate flag for experimentation. They are more likely to
interfere with loop vectorization which happens later in the pass pipeline.
llvm-svn: 191371
Some supplemental information for r191314: We would like to make sure SLP Vectorizer will not try to vectorize tiny trees even with a negative threshold so we set the cost to INT_MAX.
llvm-svn: 191327
Reapply r191108 with a fix for a memory corruption error I introduced. Of
course, we can't reference the scalars that we replace by vectorizing and then
call their eraseFromParent method. I only 'needed' the scalars to get the
DebugLoc. Just store the DebugLoc before actually vectorizing instead. As a nice
side effect, this also simplifies the interface between BoUpSLP and the
HorizontalReduction class to returning a value pointer (the vectorized tree
root).
radar://14607682
llvm-svn: 191123
Match reductions starting at binary operation feeding into a phi. The code
handles trees like
r += v1 + v2 + v3 ...
and
r += v1
r += v2
...
and
r *= v1 + v2 + ...
We currently only handle associative operations (add, fadd fast).
The code can now also handle reductions feeding into stores.
a[i] = v1 + v2 + v3 + ...
The code is currently disabled behind the flag "-slp-vectorize-hor". The cost
model for most architectures is not there yet.
I found one opportunity of a horizontal reduction feeding a phi in TSVC
(LoopRerolling-flt) and there are several opportunities where reductions feed
into stores.
radar://14607682
llvm-svn: 191108
XCore target: Add XCoreTargetTransformInfo
This is where getNumberOfRegisters() resides, which in turn returns the
number of vector registers (=0).
llvm-svn: 190936
We can't insert an insertelement after an invoke. We would have to split a
critical edge. So when we see a phi node that uses an invoke we just give up.
radar://14990770
llvm-svn: 190871
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
llvm-svn: 190205
1) If the width of vectorization list candidate is bigger than vector reg width, we will break it down to fit the vector reg.
2) We do not vectorize the width which is not power of two.
The performance result shows it will help some spec benchmarks. mesa improved 6.97% and ammp improved 1.54%.
llvm-svn: 189830
The builder inserts from before the insert point,
not after, so this would insert before the last
instruction in the bundle instead of after it.
I'm not sure if this can actually be a problem
with any of the current insertions.
llvm-svn: 189285
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
llvm-svn: 189282
A single metadata will not span multiple lines. This also helps me with
my script to automatic update the testing cases.
A debug info testing case should have a llvm.dbg.cu.
Do not use hard-coded id for debug nodes.
llvm-svn: 189033
using GEPs. Previously, it used a number of different heuristics for
analyzing the GEPs. Several of these were conservatively correct, but
failed to fall back to SCEV even when SCEV might have given a reasonable
answer. One was simply incorrect in how it was formulated.
There was good code already to recursively evaluate the constant offsets
in GEPs, look through pointer casts, etc. I gathered this into a form
code like the SLP code can use in a previous commit, which allows all of
this code to become quite simple.
There is some performance (compile time) concern here at first glance as
we're directly attempting to walk both pointers constant GEP chains.
However, a couple of thoughts:
1) The very common cases where there is a dynamic pointer, and a second
pointer at a constant offset (usually a stride) from it, this code
will actually not do any unnecessary work.
2) InstCombine and other passes work very hard to collapse constant
GEPs, so it will be rare that we iterate here for a long time.
That said, if there remain performance problems here, there are some
obvious things that can improve the situation immensely. Doing
a vectorizer-pass-wide memoizer for each individual layer of pointer
values, their base values, and the constant offset is likely to be able
to completely remove redundant work and strictly limit the scaling of
the work to scrape these GEPs. Since this optimization was not done on
the prior version (which would still benefit from it), I've not done it
here. But if folks have benchmarks that slow down it should be straight
forward for them to add.
I've added a test case, but I'm not really confident of the amount of
testing done for different access patterns, strides, and pointer
manipulation.
llvm-svn: 189007
Update iterator when the SLP vectorizer changes the instructions in the basic
block by restarting the traversal of the basic block.
Patch by Yi Jiang!
Fixes PR 16899.
llvm-svn: 188832
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
Do not generate new vector values for the same entries because we know that the incoming values
from the same block must be identical.
llvm-svn: 188185
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
Before we could vectorize PHINodes scanning successors was a good way of finding candidates. Now we can vectorize the phinodes which is simpler.
llvm-svn: 186139
This is a complete re-write if the bottom-up vectorization class.
Before this commit we scanned the instruction tree 3 times. First in search of merge points for the trees. Second, for estimating the cost. And finally for vectorization.
There was a lot of code duplication and adding the DCE exposed bugs. The new design is simpler and DCE was a part of the design.
In this implementation we build the tree once. After that we estimate the cost by scanning the different entries in the constructed tree (in any order). The vectorization phase also works on the built tree.
llvm-svn: 185774
To support this we have to insert 'extractelement' instructions to pick the right lane.
We had this functionality before but I removed it when we moved to the multi-block design because it was too complicated.
llvm-svn: 185230
Untill now we detected the vectorizable tree and evaluated the cost of the
entire tree. With this patch we can decide to trim-out branches of the tree
that are not profitable to vectorizer.
Also, increase the max depth from 6 to 12. In the worse possible case where all
of the code is made of diamond-shaped graph this can bring the cost to 2**10,
but diamonds are not very common.
llvm-svn: 184681
Rewrote the SLP-vectorization as a whole-function vectorization pass. It is now able to vectorize chains across multiple basic blocks.
It still does not vectorize PHIs, but this should be easy to do now that we scan the entire function.
I removed the support for extracting values from trees.
We are now able to vectorize more programs, but there are some serious regressions in many workloads (such as flops-6 and mandel-2).
llvm-svn: 184647
We collect gather sequences when we vectorize basic blocks. Gather sequences are excellent
hints for vectorization of other basic blocks.
llvm-svn: 184444
The type <3 x i8> is a common in graphics and we want to be able to vectorize it.
This changes accelerates bullet by 12% and 471_omnetpp by 5%.
llvm-svn: 184317
We are not working on a DAG and I ran into a number of problems when I enabled the vectorizations of 'diamond-trees' (trees that share leafs).
* Imroved the numbering API.
* Changed the placement of new instructions to the last root.
* Fixed a bug with external tree users with non-zero lane.
* Fixed a bug in the placement of in-tree users.
llvm-svn: 182508
The external user does not have to be in lane #0. We have to save the lane for each scalar so that we know which vector lane to extract.
llvm-svn: 181674
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
llvm-svn: 179117
Alp Toker