The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
Differential Revision: https://reviews.llvm.org/D44978
llvm-svn: 332352
Since -polly-codegen reports itself to preserve DependenceInfo and IslAstInfo,
we might get those analysis that were computed by a different ScopInfo for a
different Scop structure. This would be unfortunate because DependenceInfo and
IslAstInfo hold references to resources allocated by
ScopInfo/ScopBuilder/Scop (e.g. isl_id). If -polly-codegen and
DependenceInfo/IslAstInfo do not agree on which Scop to use, unpredictable
things can happen.
When the ScopInfo/Scop object is freed, there is a high probability that the
new ScopInfo/Scop object will be created at the same heap position with the
same address. Comparing whether the Scop or ScopInfo address is the expected
therefore is unreliable.
Instead, we compare the address of the isl_ctx object. Both, DependenceInfo
and IslAstInfo must hold a reference to the isl_ctx object to ensure it is
not freed before the destruction of those analyses which might happen after
the destruction of the Scop/ScopInfo they refer to. Hence, the isl_ctx
will not be freed and its address not reused as long there is a
DependenceInfo or IslAstInfo around.
This fixes llvm.org/PR34441
llvm-svn: 313842
Properly require and preserve the OptimizationRemarkEmitter for use in
ScopPass. Previously one had to get the ORE from ScopDetection because
CodeGeneration did not mark it as preserved. It would need to be
recomputed which results in the legacy PM to throw away all previous
SCoP analysis.
This also changes the implementation of ScopPass::getAnalysisUsage to
not unconditionally preserve all passes, but only those needed to be
preserved by any SCoP pass (at least when using the legacy PM). This
allows invalidating DependenceInfo (and IslAstInfo) in case the pass
would cause them to change (e.g. OpTree, DeLICM, MaximalArrayExpansion)
JSONImporter should also invalidate the DependenceInfo. In this patch
it marks DependenceInfo as preserved anyway because some regression
tests depend on it.
Differential Revision: https://reviews.llvm.org/D37010
llvm-svn: 311888
Add statistics about
- Which optimizations are applied
- Number of loops in Scops at various stages
- Number of scalar/singleton writes at various stages representative
for scalar false dependencies
- Number of parallel loops
These will be useful to find regressions due to moving Polly further
down of LLVM's pass pipeline.
Differential Revision: https://reviews.llvm.org/D37049
llvm-svn: 311553
This feature was not enabled for `PPCGCodeGeneration`. Now that this is
enabled, we can benchmark Scops that have been optimised with
`-polly-codegen-ppcg` with the `-polly-codegen-perf-monitoring` option.
Differential Revision: https://reviews.llvm.org/D36934
llvm-svn: 311328
Summary:
During code generation for a Scop we modify the IR of a function.
While this shouldn't affect a Scop in the formal sense, the implementation
caches various information about the IR such as SCEV expressions for bounds or
parameters. This cached information needs to be updated or invalidated. To this
end, SPMUpdater allows passes to report when they've invalidated a Scop to the
PassManager, which will then flush and recompute all Scops. This in turn
invalidates all iterators, so references to Scops shouldn't be held.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser
Subscribers: llvm-commits, pollydev
Differential Revision: https://reviews.llvm.org/D36524
llvm-svn: 310551
To do this, we replicate what `CodeGeneration` does. We expose
`markNodeUnreachable` from `CodeGeneration` to `PPCGCodeGeneration`.
Differential Revision: https://reviews.llvm.org/D36457
llvm-svn: 310350
Print a statement's instruction on dump() regardless of
-polly-print-instructions. dump() is supposed to be used in the debugger
only and never in regression tests. While debugging, get all the
information we have and we are not bound to break anything. For non-dump
purposes of print, forward the setting of -polly-print-instructions as
parameters.
Some calls to print() had to be changed because the
PollyPrintInstructions setting is only available in ScopInfo.cpp.
In ScheduleOptimizer.cpp, dump() was used in regression tests.
That's not what dump() is for.
The print parameter "PrintInstructions" will also be useful for an
explicit print SCoP pass in a future patch.
llvm-svn: 308746
- There is a conditional branch that is used to switch between the old
and new versions of the code.
- If we detect that the build was unsuccessful, `PPCGCodeGeneration` will
change the runtime check to be always set to false.
- To actually *reach* this runtime check instruction, `PPCGCodeGeneration`
was using assumptions about the layout of the BBs.
- However, invariant load hoisting violates this assumption by inserting
an extra basic block in the middle.
- Fix the assumption on the layout by having `createScopConditionally`
return the conditional branch instruction.
- Use this reference to set to always-false.
llvm-svn: 308010
Summary:
Introduce a "hybrid" `-polly-target` option to optimise code for either the GPU or CPU.
When this target is selected, PPCGCodeGeneration will attempt first to optimise a Scop. If the Scop isn't modified, it is then sent to the passes that form the CPU pipeline, i.e. IslScheduleOptimizerPass, IslAstInfoWrapperPass and CodeGeneration.
In case the Scop is modified, it is marked to be skipped by the subsequent CPU optimisation passes.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser
Subscribers: kbarton, nemanjai, pollydev
Tags: #polly
Differential Revision: https://reviews.llvm.org/D34054
llvm-svn: 306863
This patch aims to implement the option of allocating new arrays created
by polly on heap instead of stack. To enable this option, a key named
'allocation' must be written in the imported json file with the value
'heap'.
We need such a feature because in a next iteration, we will implement a
mechanism of maximal static expansion which will need a way to allocate
arrays on heap. Indeed, the expansion is very costly in terms of memory
and doing the allocation on stack is not worth considering.
The malloc and the free are added respectively at polly.start and
polly.exiting such that there is no use-after-free (for instance in case
of Scop in a loop) and such that all memory cells allocated with a
malloc are free'd when we don't need them anymore.
We also add :
- In the class ScopArrayInfo, we add a boolean as member called IsOnHeap
which represents the fact that the array in allocated on heap or not.
- A new branch in the method allocateNewArrays in the ISLNodeBuilder for
the case of heap allocation. allocateNewArrays now takes a BBPair
containing polly.start and polly.exiting. allocateNewArrays takes this
two blocks and add the malloc and free calls respectively to
polly.start and polly.exiting.
- As IntPtrTy for the malloc call, we use the DataLayout one.
To do that, we have modified :
- createScopArrayInfo and getOrCreateScopArrayInfo such that it returns
a non-const SAI, in order to be able to call setIsOnHeap in the
JSONImporter.
- executeScopConditionnaly such that it return both start block and end
block of the scop, because we need this two blocs to be able to add
the malloc and the free calls at the right position.
Differential Revision: https://reviews.llvm.org/D33688
llvm-svn: 306540
Before we would 'guess' the correct location for the MergeBlock
that got introduced when executing a Scop conditionally. This
implicitly depends on the situation that at this point during
CodeGen there will be nothing between polly.start and polly.exiting.
With this commit we explicitly state that we want the block that
directly follows polly.exiting.
llvm-svn: 306398
This commit returns both the start and the exit block that are created
by executeScopConditionally.
In a future commit we will make use of the exit block. Before we would
have to use the implicit property that there won't be any code generated
between polly.start and polly.exiting at the time of use to find the
correct block ('polly.exiting').
All usage location are semantically unchanged.
llvm-svn: 306283
Ensure that all array base pointers are assigned before generating
aliasing metadata by allocating new arrays beforehand.
Before this patch, getBasePtr() returned nullptr for new arrays because
the arrays were created at a later point. Nullptr did not match to any
array after the created array base pointers have been assigned and when
the loads/stores are generated.
llvm-svn: 305675
Previously, we would generate one performance counter for all scops.
Now, we generate both the old information, as well as a per-scop
performance counter to generate finer grained information.
This patch needed a way to generate a unique name for a `Scop`.
The start region, end region, and function name combined provides a
unique `Scop` name. So, `Scop` has a new public API to provide its start
and end region names.
Differential Revision: https://reviews.llvm.org/D33723
llvm-svn: 304528
Summary: To move CG to the new PM I outlined the various helper that were previously members of the CG class into free static functions. The CG class itself I moved into a header, which is required because we need to include it in `RegisterPasses` eventually.
Reviewers: grosser, Meinersbur
Reviewed By: grosser
Subscribers: pollydev, llvm-commits, sanjoy
Tags: #polly
Differential Revision: https://reviews.llvm.org/D33423
llvm-svn: 303624
Summary: This patch ports IslAst to the new PM. The change is mostly straightforward. The only major modification required is making IslAst move-only, to correctly manage the isl resources it owns.
Reviewers: grosser, Meinersbur
Reviewed By: grosser
Subscribers: nemanjai, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D33422
llvm-svn: 303622
Summary: This is a proof of concept of how to port polly-passes to the new PassManager architecture. This approach works ootb for Function-Passes, but might not be directly applicable to Scop/Region-Passes. While we could just run the Analyses/Transforms over functions instead, we'd surrender the nice pipelining behaviour we have now.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: pollydev, sanjoy, nemanjai, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31459
llvm-svn: 302902
As has been reported in the previous commit, codegen verification can result in
quadratic compile time increases for large functions with many scops. This is
certainly not something we would like to have in the Polly default
configuration. Hence, we disable codegen verification by default -- also to see
if this resolves some of the compilation timeouts we currently see on the AOSP
buildbots. We still leave this feature in Polly as it has shown _very_ useful
for debugging. In fact, we may want to have a discussion if we can bring this
feature back in a way that does not impact compilation time so much.
Thanks to Eli Friedman <efriedma@codeaurora.org> for reporting this issue and
for providing the test case in the previous commit (where I forgot to
acknowledge him).
llvm-svn: 301670
Before this change, we always tried to verify the function and printed
verification errors, but just did not abort in case -polly-codegen-verify=false
was set and verification failed. As verification can become very cosly -- for
large functions with many scops we may verify the very same function very often
-- this can affect compile time very negatively. Hence, we respect the
-polly-codegen-verify flag with this check, ensuring that no verification is run
if -polly-codegen-verify=false.
This reduces code generation time from 26 seconds to 4 seconds on the test
case below with -polly-codegen-verify=false:
struct X { int x; };
void a();
#define SIG (int x, X **y, X **z)
typedef void (*fn)SIG;
#define FN { for (int i = 0; i < x; ++i) { (*y)[i].x += (*z)[i].x; } a(); }
#define FN5 FN FN FN FN FN
#define FN25 FN5 FN5 FN5 FN5
#define FN125 FN25 FN25 FN25 FN25 FN25
#define FN250 FN125 FN125
#define FN1250 FN250 FN250 FN250 FN250 FN250
void x SIG { FN1250 }
llvm-svn: 301669
The current StackColoring algorithm does not correctly handle the
situation when some, but not all paths from a BB to the entry node
cross a llvm.lifetime.start. According to an interpretation of the
language reference at
http://llvm.org/docs/LangRef.html#llvm-lifetime-start-intrinsic
this might be correct, but it would cost too much effort to handle
in StackColoring.
To be on the safe side, remove all lifetime markers even in the original
code version (they have never been copied to the optimized version)
to ensure that no path to the entry block will cross a
llvm.lifetime.start.
The same principle applies to paths the a function return and the
llvm.lifetime.end marker, so we remove them as well.
This fixes llvm.org/PR32251.
Also see the discussion at
http://lists.llvm.org/pipermail/llvm-dev/2017-March/111551.html
llvm-svn: 299585
Summary:
A couple of the utilities used to analyze or build IR make explicit use of the legacy PM on their interface, to access analysis results. This patch removes the legacy PM from the interface, and just passes the required results directly.
This shouldn't introduce any function changes, although the API technically allowed to obtain two different analysis results before, one passed by reference and one through the PM. I don't believe that was ever intended, however.
Reviewers: grosser, Meinersbur
Reviewed By: grosser
Subscribers: nemanjai, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31653
llvm-svn: 299423
Add support for -polly-codegen-perf-monitoring. When performance monitoring
is enabled, we emit performance monitoring code during code generation that
prints after program exit statistics about the total number of cycles executed
as well as the number of cycles spent in scops. This gives an estimate on how
useful polyhedral optimizations might be for a given program.
Example output:
Polly runtime information
-------------------------
Total: 783110081637
Scops: 663718949365
In the future, we might also add functionality to measure how much time is spent
in optimized scops and how many cycles are spent in the fallback code.
Reviewers: bollu,sebpop
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31599
llvm-svn: 299359
Marking a pass as preserved is necessary if any Polly pass uses it, even
if it is not preserved within the generated code. Not marking it would
cause the the Polly pass chain to be interrupted. It is not used by any
Polly pass anymore, hence we can remove all references to it.
llvm-svn: 295983
This makes polly generate a CFG which is closer to what we want
in LLVM IR, with a loop preheader for the original loop. This is
just a cleanup, but it exposes some fragile assumptions.
I'm not completely happy with the changes related to expandCodeFor;
RTCBB->getTerminator() is basically a random insertion point which
happens to work due to the way we generate runtime checks. I'm not
sure what the right answer looks like, though.
Differential Revision: https://reviews.llvm.org/D26053
llvm-svn: 285864
LLVM's coding guideline suggests to not use @brief for one-sentence doxygen
comments to improve readability. Switch this once and for all to ensure people
do not copy @brief comments from other parts of Polly, when writing new code.
llvm-svn: 280468
There is no need to reset the position of the builder, as we can just continue
to insert code at the current position of the IRBuilder, which happens to
be precisely the location we reset the builder to.
llvm-svn: 278014
Extend the jscop interface to allow the user to export arrays. It is required
that already existing arrays of the list of arrays correspond to arrays
of the SCoP. Each array that is appended to the list will be newly created.
Furthermore, we allow the user to modify access expressions to reference
any array in case it has the same element type.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D22828
llvm-svn: 277263
This allows the finalization routine of the IslNodeBuilder to be overwritten
by derived classes. Being here, we also drop the unnecessary 'Scop' postfix
and the unnecessary 'Scop' parameter.
llvm-svn: 276622
llvm commonly adds a comment to the closing brace of a namespace to indicate
which namespace is closed. clang-tidy provides with llvm-namespace-comment
a handy tool to check for this habit. We use it to ensure we consitently use
namespace comments in Polly.
There are slightly different styles in how namespaces are closed in LLVM. As
there is no large difference between the different comment styles we go for the
style clang-tidy suggests by default.
To reproduce this fix run:
for i in `ls tools/polly/lib/*/*.cpp`; \
clang-tidy -checks='-*,llvm-namespace-comment' -p build $i -fix \
-header-filter=".*"; \
done
This cleanup was suggested by Eugene Zelenko <eugene.zelenko@gmail.com> in
http://reviews.llvm.org/D21488 and was split out to increase readability.
llvm-svn: 273621
The recent expression type changes still need more discussion, which will happen
on phabricator or on the mailing list. The precise list of commits reverted are:
- "Refactor division generation code"
- "[NFC] Generate runtime checks after the SCoP"
- "[FIX] Determine insertion point during SCEV expansion"
- "Look through IntToPtr & PtrToInt instructions"
- "Use minimal types for generated expressions"
- "Temporarily promote values to i64 again"
- "[NFC] Avoid unnecessary comparison for min/max expressions"
- "[Polly] Fix -Wunused-variable warnings (NFC)"
- "[NFC] Simplify min/max expression generation"
- "Simplify the type adjustment in the IslExprBuilder"
Some of them are just reverted as we would otherwise get conflicts. I will try
to re-commit them if possible.
llvm-svn: 272483
We now generate runtime checks __after__ the SCoP code generation and
not before, though they are still inserted at the same position int
the code. This allows to modify the runtime check during SCoP code
generation.
llvm-svn: 271894
Created a new pass ScopInfoRegionPass. As name suggests, it is a
region pass and it is there to preserve compatibility with our
existing Polly passes. ScopInfoRegionPass will return a SCoP object
for a valid region while the creation of the SCoP stays in the
ScopInfo class.
Contributed-by: Utpal Bora <cs14mtech11017@iith.ac.in>
Reviewed-by: Tobias Grosser <tobias@grosser.es>,
Johannes Doerfert <doerfert@cs.uni-saarland.de>
Differential Revision: http://reviews.llvm.org/D20770
llvm-svn: 271259
We utilize assumptions on the input to model IR in polyhedral world.
To verify these assumptions we version the code and guard it with a
runtime-check (RTC). However, since the RTCs are themselves generated
from the polyhedral representation we generate them under the same
assumptions that they should verify. In other words, the guarantees
that we try to provide with the RTCs do not hold for the RTCs
themselves. To this end it is necessary to employ a different check
for the RTCs that will verify the assumptions did hold for them too.
Differential Revision: http://reviews.llvm.org/D20165
llvm-svn: 269299
We verify the optimized function now for a long time and it helped to track
down bugs early. This will now also happen for all parallel subfunctions we
generate.
llvm-svn: 265823
When codegenerating invariant loads in some rare cases we cannot generate code
and bail out. This change ensures that we maintain a valid dominator tree
in these situations. This fixes llvm.org/PR26736
Contributed-by: Matthias Reisinger <d412vv1n@gmail.com>
llvm-svn: 264142
We now always print the reason why the code did not pass the LLVM verifier and
we also allow to disable verfication with -polly-codegen-verify=false. Before
this change the first assertion had generally no information why or what might
have gone wrong and it was also impossible to -view-cfg without recompile. This
change makes debugging bugs that result in incorrect IR a lot easier.
llvm-svn: 261320
We also disable this feature by default, as there are still some issues in
combination with invariant load hoisting that slipped through my initial
testing.
llvm-svn: 260025
Nicola Zaghen