`Transport.h` does not include `Features.inc`. However, since it is used in a
subdirectory, it cannot directly include the header as it is not available.
Include `Features.inc` in `ClangdLSPServer.h` prior to the inclusion of
`Transport.h` which will provide the interfaces in `ClangdMain.cpp` where the
symbol `newXPCTransport` will not be defined due to it being preprocessed away
since the configuration is not passed along to the initial inclusion.
llvm-svn: 358103
Summary:
The InlineAsm::AsmDialect is only required for X86; no architecture
makes use of it and as such it gets passed around between arch-specific
and general code while being unused for all architectures but X86.
Since the AsmDialect is queried from a MachineInstr, which we also pass
around, remove the additional AsmDialect parameter and query for it deep
in the X86AsmPrinter only when needed/as late as possible.
This refactor should help later planned refactors to AsmPrinter, as this
difference in the X86AsmPrinter makes it harder to make AsmPrinter more
generic.
Reviewers: craig.topper
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60488
llvm-svn: 358101
Following D60483 and D60497, this adds support for AlwaysOverflows
handling for ssubo. This is the last case we can handle right now.
Differential Revision: https://reviews.llvm.org/D60518
llvm-svn: 358100
ssubo X, C is equivalent to saddo X, -C. Make the transformation in
InstCombine and allow the logic implemented for saddo to fold prior
usages of add nsw or sub nsw with constants.
Patch by Dan Robertson.
Differential Revision: https://reviews.llvm.org/D60061
llvm-svn: 358099
This patch changes the order of pattern matching by first testing
a compare instruction's predicate, before doing the pattern
match for the whole expression tree.
Patch by Paul Walker.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D60504
llvm-svn: 358097
Summary:
There are cases where Sema can't tell that "foo" in foo::Bar is a
namespace qualifier, like in incomplete macro expansions.
After this patch, if sema reports no specifier but it looks like there's one in
the source code, then we take it into account.
Reworked structure and comments in getQueryScopes to try to fight
creeping complexity - unsure if I succeeded.
I made the test harder (the original version also passes).
Reviewers: ioeric
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60503
llvm-svn: 358091
TestObjCMethods2.py was the third-longest running test on Darwin. By
splitting it up, lit can exploit parallelism to reduce the total wall
clock time.
llvm-svn: 358088
Summary: The fp16 scalar version of facge and facgt requires a custom patter matching, as the result type is not the same width of the operands.
Reviewers: olista01, javed.absar, pbarrio
Reviewed By: javed.absar
Subscribers: kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60212
llvm-svn: 358083
Summary: One clear use case: use with an editor that reacts poorly to edits above the cursor.
Reviewers: ioeric
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60409
llvm-svn: 358075
Summary:
Intent is to use the heuristically-parsed scope in cases where we get bogus
results from sema, such as in complex macro expansions.
Added a motivating testcase we currently get wrong.
Name changed because we (already) use this for things other than speculation.
Reviewers: ioeric
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60500
llvm-svn: 358074
Summary:
When calculating the debug value history, DbgEntityHistoryCalculator
would only keep track of register clobbering for the latest debug value
per inlined entity. This meant that preceding register-described debug
value fragments would live on until the next overlapping debug value,
ignoring any potential clobbering. This patch amends
DbgEntityHistoryCalculator so that it keeps track of all registers that
a inlined entity's currently live debug values are described by.
The DebugInfo/COFF/pieces.ll test case has had to be changed since
previously a register-described fragment would incorrectly outlive its
basic block.
The parent patch D59941 is expected to increase the coverage slightly,
as it makes sure that location list entries are inserted after clobbered
fragments, and this patch is expected to decrease it, as it stops
preceding register-described from living longer than they should. All in
all, this patch and the preceding patch has a negligible effect on the
output from `llvm-dwarfdump -statistics' for a clang-3.4 binary built
using the RelWithDebInfo build profile. "Scope bytes covered" increases
by 0.5%, and "variables with location" increases from 2212083 to
2212088, but it should improve the accuracy quite a bit.
This fixes PR40283.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59942
llvm-svn: 358073
Summary:
Currently the DbgValueHistorymap only keeps track of clobbered registers
for the last debug value that it has encountered. This could lead to
preceding register-described debug values living on longer in the
location lists than they should. See PR40283 for an example. This
patch does not introduce tracking of multiple registers, but changes
the DbgValueHistoryMap structure to allow for that in a follow-up
patch. This patch is not NFC, as it at least fixes two bugs in
DwarfDebug (both are covered in the new clobbered-fragments.mir test):
* If a debug value was clobbered (its End pointer set), the value would
still be added to OpenRanges, meaning that the succeeding location list
entries could potentially contain stale values.
* If a debug value was clobbered, and there were non-overlapping
fragments that were still live after the clobbering, DwarfDebug would
not create a location list entry starting directly after the
clobbering instruction. This meant that the location list could have
a gap until the next debug value for the variable was encountered.
Before this patch, the history map was represented by <Begin, End>
pairs, where a new pair was created for each new debug value. When
dealing with partially overlapping register-described debug values, such
as in the following example:
DBG_VALUE $reg2, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 32, 32)
[...]
DBG_VALUE $reg3, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 64, 32)
[...]
$reg2 = insn1
[...]
$reg3 = insn2
the history map would then contain the entries `[<DV1, insn1>, [<DV2, insn2>]`.
This would leave it up to the users of the map to be aware of
the relative order of the instructions, which e.g. could make
DwarfDebug::buildLocationList() needlessly complex. Instead, this patch
makes the history map structure monotonically increasing by dropping the
End pointer, and replacing that with explicit clobbering entries in the
vector. Each debug value has an "end index", which if set, points to the
entry in the vector that ends the debug value. The ending entry can
either be an overlapping debug value, or an instruction which clobbers
the register that the debug value is described by. The ending entry's
instruction can thus either be excluded or included in the debug value's
range. If the end index is not set, the debug value that the entry
introduces is valid until the end of the function.
Changes to test cases:
* DebugInfo/X86/pieces-3.ll: The range of the first DBG_VALUE, which
describes that the fragment (0, 64) is located in RDI, was
incorrectly ended by the clobbering of RAX, which the second
(non-overlapping) DBG_VALUE was described by. With this patch we
get a second entry that only describes RDI after that clobbering.
* DebugInfo/ARM/partial-subreg.ll: This test seems to indiciate a bug
in LiveDebugValues that is caused by it not being aware of fragments.
I have added some comments in the test case about that. Also, before
this patch DwarfDebug would incorrectly include a register-described
debug value from a preceding block in a location list entry.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: javed.absar, kristof.beyls, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59941
llvm-svn: 358072
As discussed on PR41359, we're probably going to keep both of these but we need to make it more explicit how they complement each other.
llvm-svn: 358071
In this patch, I just remove the structure definitions for the
ModuleList stream and the associated parsing code. The rest of the code
is converted to work with the definitions in llvm. NFC.
llvm-svn: 358070
Patch by Robert O'Callahan.
Rust projects tend to link in all object files from all dependent
libraries and rely on --gc-sections to strip unused code and data.
Unfortunately --gc-sections doesn't currently strip any debuginfo
associated with GC'ed sections, so lld links in the full debuginfo from
all dependencies even if almost all that code has been discarded. See
https://github.com/rust-lang/rust/issues/56068 for some details.
Properly stripping debuginfo for discarded sections would be difficult,
but a simple approach that helps significantly is to mark debuginfo
sections as live only if their associated object file has at least one
live code/data section. This patch does that. In a (contrived but not
totally artificial) Rust testcase linked above, it reduces the final
binary size from 46MB to 5.1MB.
Differential Revision: https://reviews.llvm.org/D54747
llvm-svn: 358069
Make it possible to TableGen code for FCONSTS and FCONSTD.
We need to make two changes to the TableGen descriptions of vfp_f32imm
and vfp_f64imm respectively:
* add GISelPredicateCode to check that the immediate fits in 8 bits;
* extract the SDNodeXForms into separate definitions and create a
GISDNodeXFormEquiv and a custom renderer function for each of them.
There's a lot of boilerplate to get the actual value of the immediate,
but it basically just boils down to calling ARM_AM::getFP32Imm or
ARM_AM::getFP64Imm.
llvm-svn: 358063
Summary:
In an upcoming commit the history map will be changed so that it
contains explicit entries for instructions that clobber preceding debug
values, rather than Begin- End range pairs, so generalize the name to
"Entry".
Also, prefix the iterator variable names in buildLocationList() with
"E". In an upcoming commit the entry will have query functions such as
"isD(e)b(u)gValue", which could at a glance make one confuse it for
iterations over MachineInstrs, so make the iterator names a bit more
distinct to avoid that.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59939
llvm-svn: 358060
Summary:
Replace use of std::pair by creating a class for the debug value
instruction ranges instead. This is a preparatory refactoring for
improving handling of clobbered fragments.
In an upcoming commit the Begin pointer will become a PointerIntPair, so
it will be cleaner to have a getter for that.
Reviewers: aprantl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59938
llvm-svn: 358059
This is helpful to measure the impact of D60125 on maintaining
topological orders.
Reviewers: MatzeB, atrick, efriedma, niravd
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D60187
llvm-svn: 358058
1. Use computed VF for stress testing.
2. If the computed VF does not produce vector code (VF smaller than 2), force VF to be 4.
3. Test vectorization of i64 data on AArch64 to make sure we generate VF != 4 (on X86 that was already tested on AVX).
Patch by Francesco Petrogalli <francesco.petrogalli@arm.com>
Differential Revision: https://reviews.llvm.org/D59952
llvm-svn: 358056
We want the last row whose address is less than or equal to Address.
This can be computed as upper_bound - 1, which is simpler than
lower_bound followed by skipping equal rows in a loop.
Since FirstRow (LowPC) does not satisfy the predicate (OrderByAddress)
while LastRow-1 (HighPC) satisfies the predicate. We can decrease the
search range by two, i.e.
upper_bound [FirstRow,LastRow) = upper_bound [FirstRow+1,LastRow-1)
llvm-svn: 358053
Check AlwaysOverflow condition for usubo. The implementation is the
same as the existing handling for uaddo and umulo. Handling for saddo
and ssubo will follow (smulo doesn't have the necessary ValueTracking
support).
Differential Revision: https://reviews.llvm.org/D60483
llvm-svn: 358052
John McCall