This patch upstreams support for the Armv8-a Cortex-A78C
processor for AArch64 and ARM.
In detail:
Adding cortex-a78c as cpu option for aarch64 and arm targets in clang
Adding Cortex-A78C CPU name and ProcessorModel in llvm
Details of the CPU can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78c
Previously you just two hex numbers you had to decode manually.
This change adds a predicate formatter for extension flags
to produce failure messages like:
```
[ RUN ] AArch64CPUTests/AArch64CPUTestFixture.testAArch64CPU/2
<...>llvm/unittests/Support/TargetParserTest.cpp:862:
Failure
Expected extension flags: +fp-armv8, +crc, +crypto (0xe)
Got extension flags: +fp-armv8, +neon, +crc, +crypto (0x1e)
[ FAILED ] AArch64CPUTests/AArch64CPUTestFixture.testAArch64CPU/2,
where GetParam() = "cortex-a34", "armv8-a", <...>
```
From there you can take the feature name and map it back
to the enum in ARM/AArch64TargetParser.def.
(which isn't perfect but you've probably got both files
open if you're editing these tests)
Note that AEK_NONE is not meant to be user facing in the compiler
but here it is part of the tests. So failures may show an
extension "none" where the normal target parser wouldn't.
The formatter is implemented as a template on ARM::ISAKind
because the predicate formatters assume all parameters are used
for comparison.
(e.g. PRED_FORMAT3 is for comparing 3 values, not having 3
arguments in general)
Reviewed By: MarkMurrayARM
Differential Revision: https://reviews.llvm.org/D93448
Also convert the test function to use EXPECT_EQ and
remove the special case for the AEK_NONE extension.
This means that each test is marked as failing separatley
and the accumultated EXPECT failures are printed next
to that test, with its parameters.
Before they would be hidden by the "pass &=" pattern
and failures would print in one block since it was a
"single" test.
Example of the new failure messages:
```
ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from ARMCPUTestsPart1/ARMCPUTestFixture
[ RUN ] ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6
/work/open_source/nightly-llvm/llvm-project/llvm/unittests/Support/TargetParserTest.cpp:66:
Failure
Expected: params.ExpectedFlags
Which is: 3405705229
To be equal to: default_extensions
Which is: 1
[ FAILED ] ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6, where
GetParam() = "arm8", "armv4", "none", 0xcafef00d, "4" (0 ms)
```
Reviewed By: MarkMurrayARM
Differential Revision: https://reviews.llvm.org/D93392
This extends the command-line support for the 'armv8.7-a' architecture
name to the ARM target.
Based on a patch written by Momchil Velikov.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D93231
This introduces command-line support for the 'armv8.7-a' architecture name
(and an alias without the '-', as usual), and for the 'ls64' extension name.
Based on patches written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91776
We were passing this as an argument but never using
it. ARM has always checked this.
Note that the FPU list is shared between ARM and AArch64
so there is no AArch64::getFPUName, just ARM::getFPUName.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D93387
Remove target features crypto for Cortex-R82, because it doesn't have any, and
add LSE which was missing while we are at it.
This also removes crypto from the v8-R architecture description because that
aligns better with GCC and so far none of the R-cores have implemented crypto,
so is probably a more sensible default.
Differential Revision: https://reviews.llvm.org/D91994
Add support for the Neoverse V1 CPU to the ARM and AArch64 backends.
This is based on patches from Mark Murray and Victor Campos.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D90765
This adds support for -mcpu=cortex-r82. Some more information about this
core can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-r/cortex-r82
One note about the system register: that is a bit of a refactoring because of
small differences between v8.4-A AArch64 and v8-R AArch64.
This is based on patches from Mark Murray and Mikhail Maltsev.
Differential Revision: https://reviews.llvm.org/D88660
A list of target features is disabled when there is no hardware
floating-point support. This is the case when one of the following
options is passed to clang:
- -mfloat-abi=soft
- -mfpu=none
This option list is missing, however, the extension "+nofp" that can be
specified in -march flags, such as "-march=armv8-a+nofp".
This patch also disables unsupported target features when nofp is passed
to -march.
Differential Revision: https://reviews.llvm.org/D82948
This patch upstreams support for the Arm-v8 Cortex-A78 and Cortex-X1
processors for AArch64 and ARM.
In detail:
- Adding cortex-a78 and cortex-x1 as cpu options for aarch64 and arm targets in clang
- Adding Cortex-A78 and Cortex-X1 CPU names and ProcessorModels in llvm
details of the CPU can be found here:
https://www.arm.com/products/cortex-xhttps://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D83206
This patch upstreams support for the Arm-v8 Cortex-A77
processor for AArch64 and ARM.
In detail:
- Adding cortex-a77 as a cpu option for aarch64 and arm targets in clang
- Cortex-A77 CPU name and ProcessorModel in llvm
details of the CPU can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a77
and a similar submission to GCC can be found here:
e0664b7a63
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen, ostannard, SjoerdMeijer
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D82887
This is the first checkin to support Marvell ThunderX3T110.
Initial definition of the micro-ops of the instructions in ThunderX3T110
is included.
Differential Revision: https://reviews.llvm.org/D78129
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Command line options to enable these features with +i8mm, +f32mm, or f64mm
Note: +f32mm and +f64mm are optional and so are not enabled by default
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, DavidSpickett
Reviewed By: DavidSpickett
Subscribers: DavidSpickett, ostannard, kristof.beyls, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77875
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
This patch upstreams support for the ARM Armv8.1m cpu Cortex-M55.
In detail adding support for:
- mcpu option in clang
- Arm Target Features in clang
- llvm Arm TargetParser definitions
details of the CPU can be found here:
https://developer.arm.com/ip-products/processors/cortex-m/cortex-m55
Reviewers: chill
Reviewed By: chill
Subscribers: dmgreen, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74966
This patch upstreams support for the AArch64 Armv8-A cpu Cortex-A34.
In detail adding support for:
- mcpu option in clang
- AArch64 Target Features in clang
- llvm AArch64 TargetParser definitions
details of the cpu can be found here:
https://developer.arm.com/ip-products/processors/cortex-a/cortex-a34
Reviewers: SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: SjoerdMeijer, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74483
Change-Id: Ida101fc544ca183a0a0e61a1277c8957855fde0b
Summary:
This patch changes the underlying type of the ARM::ArchExtKind
enumeration to uint64_t and adjusts the related code.
The goal of the patch is to prepare the code base for a new
architecture extension.
Reviewers: simon_tatham, eli.friedman, ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits, pbarrio
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73906
Apple's CPUs are called A7-A13 in official communication, occasionally with
weird suffixes which we probably don't need to care about. This adds each one
and describes its features. It also switches the default CPU to the canonical
name for Cyclone, but leaves legacy support in so that existing bitcode still
compiles.
Summary:
The bitperm feature flag is now prefixed with SVE2, as it is for all other SVE2
extensions
Patch by Maciej Gabka.
Reviewers: sdesmalen, rovka, chill, SjoerdMeijer, rengolin
Reviewed By: SjoerdMeijer, rengolin
Differential Revision: https://reviews.llvm.org/D65327
llvm-svn: 367124
When processing the command line options march, mcpu and mfpu, we store
the implied target features on a vector. The change D62998 introduced a
temporary vector, where the processed features get accumulated. When
calling DecodeARMFeaturesFromCPU, which sets the default features for
the specified CPU, we certainly don't want to override the features
that have been explicitly specified on the command line. Therefore, the
default features should appear first in the final vector. This problem
became evident once I added the missing (unhandled) target features in
ARM::getExtensionFeatures.
Differential Revision: https://reviews.llvm.org/D63936
llvm-svn: 366027
Nothing of these tests made much sense. Loops were iterating too much, and I
also don't think it was actually testing anything. I think we simply want to
check that AEK_SOME_EXT returns "+some_ext".
I've given the AArch64 tests the same treatment as they very similarly didn't
made any sense either.
This fixes PR42316.
Differential Revision: https://reviews.llvm.org/D63569
llvm-svn: 363913
r363780 fixes extreme memory growth by using a new std::vector every loop iteration, but causes runtime to go up (and occasionally timeout in certain situations) because of constructor cost every loop iteration. Fix this by moving the constructor back out, but clearing contents in the loop.
Also apply this to the AArch64 features test case, which seems to use the same pattern.
llvm-svn: 363851
This adds:
- LLVM subtarget features to make all the new instructions conditional on,
- CPU and FPU names for use on clang's command line, with default FPUs set
so that "armv8.1-m.main+fp" and "armv8.1-m.main+fp.dp" will select the right
FPU features,
- architecture extension names "mve" and "mve.fp",
- ABI build attribute support for v8.1-M (a new value for Tag_CPU_arch) and MVE
(a new actual tag).
Patch mostly by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60698
llvm-svn: 362090
Summary:
This patch adds the following features defined by Arm SVE2 architecture
extension:
sve2, sve2-aes, sve2-sm4, sve2-sha3, bitperm
For existing CPUs these features are declared as unsupported to prevent
scheduler errors.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewers: SjoerdMeijer, sdesmalen, ostannard, rovka
Reviewed By: SjoerdMeijer, rovka
Subscribers: rovka, javed.absar, tschuett, kristof.beyls, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61513
llvm-svn: 360573
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Prediction control instructions are only
mandatory from v8.5a onwards but is optional
from Armv8.0-A. This patch adds a command
line option to enable it by it's own.
Differential Revision: https://reviews.llvm.org/D56007
llvm-svn: 350385
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also moves to FeatureSB the old FeatureSpecRestrict.
Reviewers: pbarrio, olista01, t.p.northover, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55921
llvm-svn: 350126
The list generated in the target parser tests is the
same as the one in the AArch64 target parser.
Use that one instead.
Differential Revision: https://reviews.llvm.org/D55509
llvm-svn: 348757
Mark Murray