Right now when we see -O# we add the corresponding 'default<O#>' into
the list of passes to run when translating legacy -pass-name. This has
the side effect of not using the default AA pipeline.
Instead, treat -O# as -passes='default<O#>', but don't allow any other
-passes or -pass-name. I think we can keep `opt -O#` as shorthand for
`opt -passes='default<O#>` but disallow anything more than just -O#.
Tests need to be updated to not use `opt -O# -pass-name`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D112036
This is a fix for the issue reported at
https://reviews.llvm.org/D110043#3019942:
The ElementSize is a uint64_t and as such may be larger than the
index space, or be negative in the index space. This is UB, but
shouldn't cause assertion failures.
We address this by detecting whether the size is too large and
use a zero index in that case (which is always conservatively
correct).
Differential Revision: https://reviews.llvm.org/D110437
Do not call `TryToShrinkGlobalToBoolean` for address spaces
that don't allow initializers. It inserts an initializer value
while shrinking to bool. Used the target hook introduced with
D109337 to skip this call for the restricted address spaces.
Reviewed By: tra
Differential Revision: https://reviews.llvm.org/D109823
This reapplies commit 7dbba3376f, or, put
differently, this reverts commit d9a8d20827.
The test now requires the amdgpu and nvptx backend explicitly as it
won't work without properly.
Not all address spaces support initializers for globals and we can
therefore not set them without checking if they are allowed. This
patch adds a hook into TTI to check if an AS allows non-undef
initializers. We disable it for all but address space 0 by default,
NVPTX and AMDGPU targets allow all but address space 3.
Reviewed By: tra
Differential Revision: https://reviews.llvm.org/D109337
We try to forward a stored-once-constant-value from one global access
to another, but that's not safe if the constant value is an expression
that can trap.
The tests are reduced from the miscompile examples in:
https://llvm.org/PR47578
Differential Revision: https://reviews.llvm.org/D108771
In the provided test case, we were trying to set the global's
initializer to `i32* null` when the global's value type was `@0`.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D108232
Currently, in OptimizeGlobalAddressOfMalloc, the transformation for global loads assumes that they have the same Type. With the support of ConstantExpr (https://reviews.llvm.org/D106589), this may not be true any more (as seen in the test case), and we miss the code to handle this, This is to fix that.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D107397
I'm working on extending the OptimizeGlobalAddressOfMalloc to handle some more general cases. This is to add support of the ConstantExpr use of the global variables. The function allUsesOfLoadedValueWillTrapIfNull is now iterative with the added CE use of GV. Also, the recursive function valueIsOnlyUsedLocallyOrStoredToOneGlobal is changed to iterative using a worklist with the GEP case added.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D106589
The bug was that evaluateBitcastFromPtr attempts a narrowing to a struct's 0th
element of a store that covers other elements. While this is okay on the load
side, applying it to stores causes us to miss the writes to the additionally
covered elements.
rdar://79503568
Differential revision: https://reviews.llvm.org/D105838
TypeFinder did not find types under DIArgList. This resulted in a case
of invalid IR after GlobalOpt removed a global that was the only
non-DIArgList use of a struct type.
error: use of undefined type named 'struct.S'
call void @llvm.dbg.value(
metadata !DIArgList([1 x %struct.S]* undef, i64 %idxprom),
metadata !24, metadata !DIExpression([...]))
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D103306
GlobalOpt can slice structs/arrays and change GEPs in the process,
but it was not updating alignments for load/store users. This
eventually causes the crashing seen in:
https://llvm.org/PR49661https://llvm.org/PR50253
On x86, this required SLP+codegen to create an aligned vector
store on an invalid address. The bugs would be easier to
demonstrate on a target with stricter alignment requirements.
I'm not sure if this is a complete solution. The alignment
updating code is adapted from InstCombine, so I assume that
part is tested and good.
Differential Revision: https://reviews.llvm.org/D102552
I'm also adding an explicit data layout, so we can
confirm that alignment requirements/prefs are met.
I tried to use complete/scripted CHECK lines here,
but that fails with 1 of the globals, and not sure why.
GlobalOpt implements a heap SROA (SROA for an malloc allocatated struct or array
of structs) which is largely undertested (heap-sra-[1234].ll are basically the
same test with very little difference) and does not trigger at all when
bootstrapping clang (it only supports the case of one single store).
The heap SROA implementation causes PR50027 (GEP is not properly handled; crash or miscompile).
Just drop the implementation. I have deleted some obviously duplicated tests
but kept `heap-sra-[12]{,-no-nullopt}.ll`.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D102257
Both the alias and aliasee linkage are important.
PR27866 provides some background.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99629
Trying to evaluate a GEP would assert with
"Ty == cast<PointerType>(C->getType()->getScalarType())->getElementType()"
because the type of the pointer we would evaluate the GEP argument to
would be a different type than the GEP was expecting. We should treat
pointer stripping as a bitcast.
The test adds a redundant GEP that would crash due to type mismatch.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D100970
Turning on -fstrict-vtable-pointers in Chrome caused an extra global
initializer. Turns out that a llvm.strip.invariant.group intrinsic was
causing GlobalOpt to fail to step through some simple code.
We can treat *.invariant.group uses as simply their operand.
Value::stripPointerCastsForAliasAnalysis() does exactly this. This
should be safe because the Evaluator does not skip memory accesses due
to invariants or alias analysis.
However, we don't want to leak that we've stripped arbitrary pointer
casts to users of Evaluator, so we bail out if we evaluate a function to
any constant, since we may have looked through *.invariant.group calls
and aliasing pointers cannot be arbitrarily substituted.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D98843
This patch enhances hasAddressTaken() to ignore bitcasts as a
callee in callbase instruction. Such bitcast usage doesn't really take
the address in a useful meaningful way.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D98884
I think byval/sret and the others are close to being able to rip out
the code to support the missing type case. A lot of this code is
shared with inalloca, so catch this up to the others so that can
happen.
When marking a global variable constant, and simplifying users using
CleanupConstantGlobalUsers(), the pass could incorrectly return false if
there were still some uses left, and no further optimizations was done.
This was caught using the check introduced by D80916.
This fixes PR46749.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D85837
When removing a non-constant store to a global in
CleanupPointerRootUsers(), the GlobalOpt pass could incorrectly return
false.
This was caught using the check introduced by D80916.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86149
When possible (e.g. internal linkage), strip preallocated attribute off
parameters/arguments.
This requires removing the "preallocated" operand bundle from the call
site, replacing @llvm.call.preallocated.arg() with an alloca and a
bitcast to i8*, and removing the @llvm.call.preallocated.setup(). Since
@llvm.call.preallocated.arg() can be called multiple times with the same
arg index, we create an alloca per arg index.
We add a @llvm.stacksave() where the @llvm.call.preallocated.setup() was
and a @llvm.stackrestore() after the preallocated call to prevent the
stack from blowing up. This is valid because the argument would normally
not exist on the stack after the call before the transformation.
This does not currently handle all possible preallocated calls. We will
need to figure out where to put @llvm.stackrestore() in the cases where
there is no obvious place to put it, for example conditional
preallocated calls, invokes.
This sort of transformation may need to be moved to somewhere more
accessible to accomodate similar transformations (like inlining) in the
future.
Reviewers: efriedma, hans
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80951
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
The "null-pointer-is-valid" attribute needs to be checked by many
pointer-related combines. To make the check more efficient, convert
it from a string into an enum attribute.
In the future, this attribute may be replaced with data layout
properties.
Differential Revision: https://reviews.llvm.org/D78862
PR35760 shows an example program which, when compiled with `clang -O0`
or gcc at any optimization level, prints '0'. However, llvm transforms
the program in a way that causes it to print '1'.
Fix the issue by having `AllUsesOfValueWillTrapIfNull` return false when
analyzing a load from a global which is used by an `icmp`. This special
case was untested [0] so this is just deleting dead code.
An alternative fix might be to change the GlobalStatus analysis for the
global to report "Stored" instead of "StoredOnce". However, "StoredOnce"
is appropriate when only one value other than the initializer is stored
to the global.
[0]
http://lab.llvm.org:8080/coverage/coverage-reports/coverage/Users/buildslave/jenkins/workspace/coverage/llvm-project/llvm/lib/Transforms/IPO/GlobalOpt.cpp.html#L662
Differential Revision: https://reviews.llvm.org/D76645
Summary:
For artificial cases (huge array, few usages), Global SRA optimization creates
a lot of redundant data. It creates an instance of GlobalVariable for each array
element. For huge array, that means huge compilation time and huge memory usage.
Following example compiles for 10 minutes and requires 40GB of memory.
namespace {
char LargeBuffer[64 * 1024 * 1024];
}
int main ( void ) {
LargeBuffer[0] = 0;
printf("\n ");
return LargeBuffer[0] == 0;
}
The fix is to avoid Global SRA for large arrays.
Reviewers: craig.topper, rnk, efriedma, fhahn
Reviewed By: rnk
Subscribers: xbolva00, lebedev.ri, lkail, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71993
Arthur Eubanks