The tests that exercise the 'release' mode, where the model is AOT-ed,
check the output has certain properties, to validate that, indeed, a
different policy from the default one was exercised. For determinism, we
can't reliably check that output for an arbitrary learned policy, since
it could be that policy happens to mimic the default one in that
particular case.
This patch adds a requirement that those tests run only when the model
is autogenerated (e.g. on build bots).
Differential Revision: https://reviews.llvm.org/D111747
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors and GN build system.
Differential Revision: https://reviews.llvm.org/D86974
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors.
Differential Revision: https://reviews.llvm.org/D86974
This is relanding commit d1d36f7ad2 .
This patch additionally addresses failures found in buildbots due to unstable build ordering & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
This is relanding commit d1d36f7ad2 .
This patch additionally addresses failures found in buildbots & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
lld/MachO/Driver.cpp and lld/MachO/SyntheticSections.cpp include
llvm/Config/config.h which doesn't exist when building standalone lld.
This patch replaces llvm/Config/config.h include with llvm/Config/llvm-config.h
just like it is in lld/ELF/Driver.cpp and HAVE_LIBXAR with LLVM_HAVE_LIXAR and
moves LLVM_HAVE_LIBXAR from config.h to llvm-config.h
Also it adds LLVM_HAVE_LIBXAR to LLVMConfig.cmake and links liblldMachO2.so
with XAR_LIB if LLVM_HAVE_LIBXAR is set.
Differential Revision: https://reviews.llvm.org/D102084
This primarily parses a different set of options and invokes the same
resource compiler as llvm-rc normally. Additionally, it can convert
directly to an object file (which in MSVC style setups is done with the
separate cvtres tool, or by the linker).
(GNU windres also supports other conversions; from coff object file back
to .res, and from .res or object file back to .rc form; that's not yet
implemented.)
The other bigger complication lies in being able to imply or pass the
intended target triple, to let clang find the corresponding mingw sysroot
for finding include files, and for specifying the default output object
machine format.
It can be implied from the tool triple prefix, like
`<triple>-[llvm-]windres` or picked up from the windres option e.g.
`-F pe-x86-64`. In GNU windres, that option takes BFD style format names
such as pe-i386 or pe-x86-64. As libbfd in binutils doesn't support
Windows on ARM, there's no such canonical name for the ARM targets.
Therefore, as an LLVM specific extension, this option is extended to
allow passing full triples, too.
Differential Revision: https://reviews.llvm.org/D100756
This implements an LLVM tool that's flag- and output-compatible
with macOS's `otool` -- except for bugs, but from testing with both
`otool` and `xcrun otool-classic`, llvm-otool matches vanilla
otool's behavior very well already. It's not 100% perfect, but
it's a very solid start.
This uses the same approach as llvm-objcopy: llvm-objdump uses
a different OptTable when it's invoked as llvm-otool. This
is possible thanks to D100433.
Differential Revision: https://reviews.llvm.org/D100583
This breaks the windows bots because the dependency does not exist on Windows.
Per the cmake file:
if(CMAKE_HOST_UNIX)
add_subdirectory(LLJITWithRemoteDebugging)
endif()
This reverts commit bd56e91fdb.
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors.
Differential Revision: https://reviews.llvm.org/D86974
Multi-configuration generators (such as Visual Studio and Xcode) allow the specification of a build flavor at build time instead of config time, so the lit configuration files need to support that - and they do for the most part. There are several places that had one of two issues (or both!):
1) Paths had %(build_mode)s set up, but then not configured, resulting in values that would not work correctly e.g. D:/llvm-build/%(build_mode)s/bin/dsymutil.exe
2) Paths did not have %(build_mode)s set up, but instead contained $(Configuration) (which is the value for Visual Studio at configuration time, for Xcode they would have had the equivalent) e.g. "D:/llvm-build/$(Configuration)/lib".
This seems to indicate that we still have a lot of fragility in the configurations, but also that a number of these paths are never used (at least on Windows) since the errors appear to have been there a while.
This patch fixes the configurations and it has been tested with Ninja and Visual Studio to generate the correct paths. We should consider removing some of these settings altogether.
Reviewed By: JDevlieghere, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96427
This diff adds llvm-bitcode-strip driver to llvm-objcopy.
In the future this will enable us to build a replacement for the tool bitcode_strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D87212
Summary:
When running a large test in LLVM_ENABLE_EXPENSIVE_CHECKS=ON mode,
buildbot could hit timeout.
Disable the test when this mode is on.
Also disable it for debug so that the test won't hang for too long.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87794
This matches the changes made to handling of zlib done in 10b1b4a
where we rely on find_package and the imported target rather than
manually appending the library and include paths. The use of
LLVM_LIBXML2_ENABLED has been replaced by LLVM_ENABLE_LIBXML2
thus reducing the number of variables.
Differential Revision: https://reviews.llvm.org/D84563
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Windows doesn't properly support pass plugins (as a shared library
can't have undefined references, which pass plugins assume, being
loaded into a host process that contains provides them), thus
disable building it and the corresponding test.
This matches what was done for the passes unit test in
bc8e442188.
Differential Revision: https://reviews.llvm.org/D79771
The problem on Windows was that the \b in "..\bin" was interpreted
as an escape sequence. Use r"" strings to prevent that.
This reverts commit ab11b9eefa,
with raw strings in the lit.site.cfg.py.in files.
Differential Revision: https://reviews.llvm.org/D77184
Mircea Trofin