We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
Rework template argument checking so that all arguments are type-checked
and cast if necessary.
Add a test.
Differential Revision: https://reviews.llvm.org/D96416
As discussed on the RFC [0], I am sharing the set of patches that
enables checking of original Debug Info metadata preservation in
optimizations. The proof-of-concept/proposal can be found at [1].
The implementation from the [1] was full of duplicated code,
so this set of patches tries to merge this approach into the existing
debugify utility.
For example, the utility pass in the original-debuginfo-check
mode could be invoked as follows:
$ opt -verify-debuginfo-preserve -pass-to-test sample.ll
Since this is very initial stage of the implementation,
there is a space for improvements such as:
- Add support for the new pass manager
- Add support for metadata other than DILocations and DISubprograms
[0] https://groups.google.com/forum/#!msg/llvm-dev/QOyF-38YPlE/G213uiuwCAAJ
[1] https://github.com/djolertrk/llvm-di-checker
Differential Revision: https://reviews.llvm.org/D82545
This adds a G_ASSERT_SEXT opcode, similar to G_ASSERT_ZEXT. This instruction
signifies that an operation was already sign extended from a smaller type.
This is useful for functions with sign-extended parameters.
E.g.
```
define void @foo(i16 signext %x) {
...
}
```
This adds verifier, regbankselect, and instruction selection support for
G_ASSERT_SEXT equivalent to G_ASSERT_ZEXT.
Differential Revision: https://reviews.llvm.org/D96890
With enough cores, the slowest tests can significantly change the total testing time if they happen to run late. With this change, a test suite can improve performance (for high-end systems) by listing just a few of the slowest tests up front.
Reviewed By: jdenny, jhenderson
Differential Revision: https://reviews.llvm.org/D96594
Some test systems do not use lit for test discovery but only for its
substitution and test selection because they use another way of managing
test collections, e.g. CTest. This forces those tests to be invoked with
lit --no-indirectly-run-check. When a mix of lit version is in use, it
requires to detect the availability of that option.
This commit provides a new config option standalone_tests to signal a
directory made of tests meant to run as standalone. When this option is
set, lit skips test discovery and the indirectly run check. It also adds
the missing documentation for --no-indirectly-run-check.
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D94766
1. Emit warnings for files without symbols.
2. Add -no_warning_for_no_symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D95843
The few options are niche. They solved a problem which was traditionally solved
with more shell commands (`llvm-readelf -n` fetches the Build ID. Then
`ln` is used to hard link the file to a directory derived from the Build ID.)
Due to limitation, they are no longer used by Fuchsia and they don't appear to
be used elsewhere (checked with Google Search and Debian Code Search). So delete
them without a transition period.
Announcement: https://lists.llvm.org/pipermail/llvm-dev/2021-February/148446.html
Differential Revision: https://reviews.llvm.org/D96310
This patch adds a new intrinsic experimental.vector.reduce that takes a single
vector and returns a vector of matching type but with the original lane order
reversed. For example:
```
vector.reverse(<A,B,C,D>) ==> <D,C,B,A>
```
The new intrinsic supports fixed and scalable vectors types.
The fixed-width vector relies on shufflevector to maintain existing behaviour.
Scalable vector uses the new ISD node - VECTOR_REVERSE.
This new intrinsic is one of the named shufflevector intrinsics proposed on the
mailing-list in the RFC at [1].
Patch by Paul Walker (@paulwalker-arm).
[1] https://lists.llvm.org/pipermail/llvm-dev/2020-November/146864.html
Differential Revision: https://reviews.llvm.org/D94883
In the past, it was stated in D87994 that it is allowed to dereference a pointer that is partially undefined
if all of its possible representations fit into a dereferenceable range.
The motivation of the direction was to make a range analysis helpful for assuring dereferenceability.
Even if a range analysis concludes that its offset is within bounds, the offset could still be partially undefined; to utilize the range analysis, this relaxation was necessary.
https://groups.google.com/g/llvm-dev/c/2Qk4fOHUoAE/m/KcvYMEgOAgAJ has more context about this.
However, this is currently blocking another optimization, which is annotating the noundef attribute for library functions' arguments. D95122 is the patch.
Currently, there are quite a few library functions which cannot have noundef attached to its pointer argument because it can be transformed from load/store.
For example, MemCpyOpt can convert stores into memset:
```
store p, i32 0
store (p+1), i32 0 // Since currently it is allowed for store to have partially undefined pointer..
->
memset(p, 0, 8) // memset cannot guarantee that its ptr argument is noundef.
```
A bigger problem is that this makes unclear which library functions are allowed to have 'noundef' and which functions aren't (e.g., strlen).
This makes annotating noundef almost impossible for this kind of functions.
This patch proposes that all memory operations should have well-defined pointers.
For memset/memcpy, it is semantically equivalent to running a loop until the size is met (and branching on undef is UB), so the size is also updated to be well-defined.
Strictly speaking, this again violates the implication of dereferenceability from range analysis result.
However, I think this is okay for the following reasons:
1. It seems the existing analyses in the LLVM main repo does not have conflicting implementation with the new proposal.
`isDereferenceableAndAlignedPointer` works only when the GEP offset is constant, and `isDereferenceableAndAlignedInLoop` is also fine.
2. A possible miscompilation happens only when the source has a pointer with a *partially* undefined offset (it's okay with poison because there is no 'partially poison' value).
But, at least I'm not aware of a language using LLVM as backend that has a well-defined program while allowing partially undefined pointers.
There might be such a language that I'm not aware of, but improving the performance of the mainstream languages like C and Rust is more important IMHO.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D95238
explicitly emitting retainRV or claimRV calls in the IR
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
Before, the first mention of LLVM's license on the developer policy page stated
that LLVM's license is Apache 2. This patch makes that more accurate by
mentioning the LLVM exception this first time the LLVM license is discussed on
that page, i.e. Apache-2.0 with LLVM-exception.
Technically, the correct SPDX identifier for LLVM's license is 'Apache-2.0 WITH
LLVM-exception', but I thought that writing the 'WITH' in lower case made the
paragraph easier to read without reducing clarity.
Differential Revision: https://reviews.llvm.org/D96482
This is a follow up patch to D83136 adding the align attribute to `cmpxchg`.
See also D83465 for `atomicrmw`.
Differential Revision: https://reviews.llvm.org/D87443
emitting retainRV or claimRV calls in the IR
This reapplies 3fe3946d9a without the
changes made to lib/IR/AutoUpgrade.cpp, which was violating layering.
Original commit message:
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
emitting retainRV or claimRV calls in the IR
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
Based on the comments in the code, the idea is that AsmPrinter is
unable to produce entry value blocks of arbitrary length, such as
DW_OP_entry_value [DW_OP_reg5 DW_OP_lit1 DW_OP_plus]. But the way the
Verifier check is written it also disallows DW_OP_entry_value
[DW_OP_reg5] DW_OP_lit1 DW_OP_plus which seems to overshoot the
target.
Note that this patch does not change any of the safety guards in
LiveDebugValues — there is zero behavior change for clang. It just
allows us to legalize more complex expressions in future patches.
rdar://73907559
Differential Revision: https://reviews.llvm.org/D95990
On z/OS, other error messages are not matched correctly in lit tests.
```
EDC5121I Invalid argument.
EDC5111I Permission denied.
```
This patch adds a lit substitution to fix it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D95808
With the new PM imminent, bugpoint will diverge from opt, meaning it may
not reproduce a crash with the same arguments passed to opt. We need to
specify alternatives to bugpoint for reducing crashes.
I looked at the rest of the document to see if anything could be
improved. Major highlights:
* Run -Xclang -disable-llvm-passes instead of -O0 for skipping IR passes
* Mention the files that clang dumps on a crash
* Remove outdated reference to `delta` and plug `creduce` instead
* Mention llvm-reduce on top of bugpoint
* Mention --print-before-all --print-module-scope
* Mention sanitizers in addition to valgrind
* Mention opt-bisect for miscompiles
Reviewed By: fhahn, MaskRay
Differential Revision: https://reviews.llvm.org/D95578
So far, it was not specified what happens with the VGPRs of inactive
lanes when functions are called. This patch explicitely mentions that
the VGPR values of inactive lanes need to be preserved for all
registers.
This describes the current behavior, as only active lanes of registers
are saved to scratch. Also, as the multi-lane nature of VGPRs is not
properly modeled, we cannot determine the live VGPRs from inactive lanes
at calls. So we cannot save them, even if we intended to do so.
Differential Revision: https://reviews.llvm.org/D95610
To set non-default rounding mode user usually calls function 'fesetround'
from standard C library. This way has some disadvantages.
* It creates unnecessary dependency on libc. On the other hand, setting
rounding mode requires few instructions and could be made by compiler.
Sometimes standard C library even is not available, like in the case of
GPU or AI cores that execute small kernels.
* Compiler could generate more effective code if it knows that a particular
call just sets rounding mode.
This change introduces new IR intrinsic, namely 'llvm.set.rounding', which
sets current rounding mode, similar to 'fesetround'. It however differs
from the latter, because it is a lower level facility:
* 'llvm.set.rounding' does not return any value, whereas 'fesetround'
returns non-zero value in the case of failure. In glibc 'fesetround'
reports failure if its argument is invalid or unsupported or if floating
point operations are unavailable on the hardware. Compiler usually knows
what core it generates code for and it can validate arguments in many
cases.
* Rounding mode is specified in 'fesetround' using constants like
'FE_TONEAREST', which are target dependent. It is inconvenient to work
with such constants at IR level.
C standard provides a target-independent way to specify rounding mode, it
is used in FLT_ROUNDS, however it does not define standard way to set
rounding mode using this encoding.
This change implements only IR intrinsic. Lowering it to machine code is
target-specific and will be implemented latter. Mapping of 'fesetround'
to 'llvm.set.rounding' is also not implemented here.
Differential Revision: https://reviews.llvm.org/D74729
On z/OS, the following error message is not matched correctly in lit tests.
```
EDC5129I No such file or directory.
```
This patch uses a lit config substitution to check for platform specific error messages.
Reviewed By: muiez, jhenderson
Differential Revision: https://reviews.llvm.org/D95246
Add LLVM to the DW_CFA_LLVM_def_aspace_cfa and
DW_CFA_LLVM_def_aspace_cfa_sf DWARF extensions.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D95640
This adds a generic opcode which communicates that a type has already been
zero-extended from a narrower type.
This is intended to be similar to AssertZext in SelectionDAG.
For example,
```
%x_was_extended:_(s64) = G_ASSERT_ZEXT %x, 16
```
Signifies that the top 48 bits of %x are known to be 0.
This is useful in cases like this:
```
define i1 @zeroext_param(i8 zeroext %x) {
%cmp = icmp ult i8 %x, -20
ret i1 %cmp
}
```
In AArch64, `%x` must use a 32-bit register, which is then truncated to a 8-bit
value.
If we know that `%x` is already zero-ed out in the relevant high bits, we can
avoid the truncate.
Currently, in GISel, this looks like this:
```
_zeroext_param:
and w8, w0, #0xff ; We don't actually need this!
cmp w8, #236
cset w0, lo
ret
```
While SDAG does not produce the truncation, since it knows that it's
unnecessary:
```
_zeroext_param:
cmp w0, #236
cset w0, lo
ret
```
This patch
- Adds G_ASSERT_ZEXT
- Adds MIRBuilder support for it
- Adds MachineVerifier support for it
- Documents it
It also puts G_ASSERT_ZEXT into its own class of "hint instruction." (There
should be a G_ASSERT_SEXT in the future, maybe a G_ASSERT_ALIGN as well.)
This allows us to skip over hints in the legalizer etc. These can then later
be selected like COPY instructions or removed.
Differential Revision: https://reviews.llvm.org/D95564
... and similarly for some other cases. This is for consistency and to
make it easier to search for mentions of a particular architecture.
Differential Revision: https://reviews.llvm.org/D95453
Commit be9f322e8dc530a56f03356aad31fa9031b27e26 moved the list of workers from
slaves.py to workers.py, but the documentation in "How To Add A Builder" was
never updated and now references a non-existing file. This fixes that.
Reviewed By: gkistanova
Differential Revision: https://reviews.llvm.org/D94886
The documentation for contributing to LLVM currently links to the section
explaining how to submit a Phabricator review using the web interface.
I believe it would be better to link to the general page for using
Phabricator instead, which explains how to sign up with Phabricator,
and also how to submit patches using either the web interface or the
command-line.
I think this is worth changing because what currently *appears* to be our
preferred way of submitting a patch (through the web interface) isn't
actually what we prefer. Indeed, patches submitted from the command-line
have more meta-data available (such as which repository the patch targets),
and also can't suffer from missing context.
Differential Revision: https://reviews.llvm.org/D94929
This puts it in alphabetical order, matching the rest of the list.
Reviewed by: MaskRay, saugustine
Differential Revision: https://reviews.llvm.org/D94481
Currently LLVM is relying on ValueTracking's `isKnownNonZero` to attach `nonnull`, which can return true when the value is poison.
To make the semantics of `nonnull` consistent with the behavior of `isKnownNonZero`, this makes the semantics of `nonnull` to accept poison, and return poison if the input pointer isn't null.
This makes many transformations like below legal:
```
%p = gep inbounds %x, 1 ; % p is non-null pointer or poison
call void @f(%p) ; instcombine converts this to call void @f(nonnull %p)
```
Instead, this semantics makes propagation of `nonnull` to caller illegal.
The reason is that, passing poison to `nonnull` does not immediately raise UB anymore, so such program is still well defined, if the callee does not use the argument.
Having `noundef` attribute there re-allows this.
```
define void @f(i8* %p) { ; functionattr cannot mark %p nonnull here anymore
call void @g(i8* nonnull %p) ; .. because @g never raises UB if it never uses %p.
ret void
}
```
Another attribute that needs to be updated is `align`. This patch updates the semantics of align to accept poison as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D90529
The attributes in the example are placed wrong:
They belong after the type, not after the parameter name.
Reviewed by: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D94683
RISC-V would like to use a struct of scalable vectors to return multiple
values from intrinsics. This woud also be needed for target independent
intrinsics like llvm.sadd.overflow.
This patch removes the existing restriction for this. I've modified
StructType::isSized to consider a struct containing scalable vectors
as unsized so the verifier won't allow loads/stores/allocas of these
structs.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D94142
The ``llvm.experimental.noalias.scope.decl`` intrinsic identifies where a noalias
scope is declared. When the intrinsic is duplicated, a decision must
also be made about the scope: depending on the reason of the duplication,
the scope might need to be duplicated as well.
Reviewed By: nikic, jdoerfert
Differential Revision: https://reviews.llvm.org/D93039
New dwarf operator DW_OP_LLVM_implicit_pointer is introduced (present only in LLVM IR)
This operator is required as it is different than DWARF operator
DW_OP_implicit_pointer in representation and specification (number
and types of operands) and later can not be used as multiple level.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D84113
Generalize the documentation to include both, GDB and LLDB. Add a link to the interface
definition. Make a note on MCJIT's restriction to ELF. Mention the regression and bugfix
in LLDB as well as the jit-loader setting for macOS. Update the command line session to
use LLDB instead of GDB.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D90789
This is a small patch stating that a nocapture pointer cannot be returned.
Discussed in D93189.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D94386
Reorder the AMDGPUUage description of the memory model code sequences
for volatile so clear that it applies independent of the nontemporal
setting.
Differential Revision: https://reviews.llvm.org/D94358
Currently SimplifyCFG drops the debug locations of 'bonus' instructions.
Such instructions are moved before the first branch. The reason for the
current behavior is that this could lead to surprising debug stepping,
if the block that's folded is dead.
In case the first branch and the instructions to be folded have the same
debug location, this shouldn't be an issue and we can keep the debug
location.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D93662
Treat a non-atomic volatile load and store as a relaxed atomic at
system scope for the address spaces accessed. This will ensure all
relevant caches will be bypassed.
A volatile atomic is not changed and still only bypasses caches upto
the level specified by the SyncScope operand.
Differential Revision: https://reviews.llvm.org/D94214
Differential Revision: https://reviews.llvm.org/D93911
This first step adds the assert statement and supports it at top level
and in record definitions. Later steps will support it in class
definitions and multiclasses.
Several `#if SANITIZER_LINUX && !SANITIZER_ANDROID` guards are replaced
with the more appropriate `#if SANITIZER_GLIBC` (the headers are glibc
extensions, not specific to Linux (i.e. if we ever support GNU/kFreeBSD
or Hurd, the guards may automatically work)).
Several `#if SANITIZER_LINUX && !SANITIZER_ANDROID` guards are refined
with `#if SANITIZER_GLIBC` (the definitions are available on Linux glibc,
but may not be available on other libc (e.g. musl) implementations).
This patch makes `ninja asan cfi lsan msan stats tsan ubsan xray` build on a musl based Linux distribution (apk install musl-libintl)
Notes about disabled interceptors for musl:
* `SANITIZER_INTERCEPT_GLOB`: musl does not implement `GLOB_ALTDIRFUNC` (GNU extension)
* Some ioctl structs and functions operating on them.
* `SANITIZER_INTERCEPT___PRINTF_CHK`: `_FORTIFY_SOURCE` functions are GNU extension
* `SANITIZER_INTERCEPT___STRNDUP`: `dlsym(RTLD_NEXT, "__strndup")` errors so a diagnostic is formed. The diagnostic uses `write` which hasn't been intercepted => SIGSEGV
* `SANITIZER_INTERCEPT_*64`: the `_LARGEFILE64_SOURCE` functions are glibc specific. musl does something like `#define pread64 pread`
* Disabled `msg_iovlen msg_controllen cmsg_len` checks: musl is conforming while many implementations (Linux/FreeBSD/NetBSD/Solaris) are non-conforming. Since we pick the glibc definition, exclude the checks for musl (incompatible sizes but compatible offsets)
Pass through LIBCXX_HAS_MUSL_LIBC to make check-msan/check-tsan able to build libc++ (https://bugs.llvm.org/show_bug.cgi?id=48618).
Many sanitizer features are available now.
```
% ninja check-asan
(known issues:
* ASAN_OPTIONS=fast_unwind_on_malloc=0 odr-violations hangs
)
...
Testing Time: 53.69s
Unsupported : 185
Passed : 512
Expectedly Failed: 1
Failed : 12
% ninja check-ubsan check-ubsan-minimal check-memprof # all passed
% ninja check-cfi
( all cross-dso/)
...
Testing Time: 8.68s
Unsupported : 264
Passed : 80
Expectedly Failed: 8
Failed : 32
% ninja check-lsan
(With GetTls (D93972), 10 failures)
Testing Time: 4.09s
Unsupported: 7
Passed : 65
Failed : 22
% ninja check-msan
(Many are due to functions not marked unsupported.)
Testing Time: 23.09s
Unsupported : 6
Passed : 764
Expectedly Failed: 2
Failed : 58
% ninja check-tsan
Testing Time: 23.21s
Unsupported : 86
Passed : 295
Expectedly Failed: 1
Failed : 25
```
Used `ASAN_OPTIONS=verbosity=2` to verify there is no unneeded interceptor.
Partly based on Jari Ronkainen's https://reviews.llvm.org/D63785#1921014
Note: we need to place `_FILE_OFFSET_BITS` above `#include "sanitizer_platform.h"` to avoid `#define __USE_FILE_OFFSET64 1` in 32-bit ARM `features.h`
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D93848
This is an enhancement to LLVM Source-Based Code Coverage in clang to track how
many times individual branch-generating conditions are taken (evaluate to TRUE)
and not taken (evaluate to FALSE). Individual conditions may comprise larger
boolean expressions using boolean logical operators. This functionality is
very similar to what is supported by GCOV except that it is very closely
anchored to the ASTs.
Differential Revision: https://reviews.llvm.org/D84467
Currently, the compiler crashes in instruction selection of global
load/stores in gfx600 due to the lack of FLAT instructions. This patch
fix the crash by selecting MUBUF instructions for global load/stores
in gfx600.
Authored-by: Praveen Velliengiri <Praveen.Velliengiri@amd.com>
Reviewed by: t-tye
Differential revision: https://reviews.llvm.org/D92483
Update the documentation and add a test.
Build failed: Change SIZE_MAX to std::numeric_limits<int64_t>::max().
Differential Revision: https://reviews.llvm.org/D93419
The llvm.coro.end.async intrinsic allows to specify a function that is
to be called as the last action before returning. This function will be
inlined after coroutine splitting.
This function can contain a 'musttail' call to allow for guaranteed tail
calling as the last action.
Differential Revision: https://reviews.llvm.org/D93568
Change Summary:
* Clarify that release manager can commit without code owner approval
(but are still highly encouraged to get approval).
* Clarify that there is no official release criteria.
* Document what types of changes are allowed in each release phase.
This is update is based on the RFC submitted here:
http://lists.llvm.org/pipermail/llvm-dev/2020-May/141730.html
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D93493
Introduce CHECK modifiers that change the behavior of the CHECK
directive. Also add a LITERAL modifier for cases where matching could
end requiring escaping strings interpreted as regex where only
literal/fixed string matching is desired (making the CHECK's more
difficult to write/fragile and difficult to interpret).
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
Clang FE currently has hot/cold function attribute. But we only have
cold function attribute in LLVM IR.
This patch adds support of hot function attribute to LLVM IR. This
attribute will be used in setting function section prefix/suffix.
Currently .hot and .unlikely suffix only are added in PGO (Sample PGO)
compilation (through isFunctionHotInCallGraph and
isFunctionColdInCallGraph).
This patch changes the behavior. The new behavior is:
(1) If the user annotates a function as hot or isFunctionHotInCallGraph
is true, this function will be marked as hot. Otherwise,
(2) If the user annotates a function as cold or
isFunctionColdInCallGraph is true, this function will be marked as
cold.
The changes are:
(1) user annotated function attribute will used in setting function
section prefix/suffix.
(2) hot attribute overwrites profile count based hotness.
(3) profile count based hotness overwrite user annotated cold attribute.
The intention for these changes is to provide the user a way to mark
certain function as hot in cases where training input is hard to cover
all the hot functions.
Differential Revision: https://reviews.llvm.org/D92493
[amdgpu] Default to code object v3
v4 is not yet readily available, and doesn't appear
to be implemented in the back end
Reviewed By: t-tye, yaxunl
Differential Revision: https://reviews.llvm.org/D93258
Add mir-check-debug pass to check MIR-level debug info.
For IR-level, currently, LLVM have debugify + check-debugify to generate
and check debug IR. Much like the IR-level pass debugify, mir-debugify
inserts sequentially increasing line locations to each MachineInstr in a
Module, But there is no equivalent MIR-level check-debugify pass, So now
we support it at "mir-check-debug".
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D91595
Add mir-check-debug pass to check MIR-level debug info.
For IR-level, currently, LLVM have debugify + check-debugify to generate
and check debug IR. Much like the IR-level pass debugify, mir-debugify
inserts sequentially increasing line locations to each MachineInstr in a
Module, But there is no equivalent MIR-level check-debugify pass, So now
we support it at "mir-check-debug".
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D91595
The Linux/SystemZ platform is missing in the Getting Started guide
as platform on which LLVM is known to work.
Reviewed by: uweigand
Differential Revision: https://reviews.llvm.org/D93388
- Clarify documentation on initializing scratch.
- Rename compute_pgm_rsrc2 field for enabling scratch from
ENABLE_SGPR_PRIVATE_SEGMENT_WAVEFRONT_OFFSET to
ENABLE_PRIVATE_SEGMENT to match hardware definition.
Differential Revision: https://reviews.llvm.org/D93271
Add mir-check-debug pass to check MIR-level debug info.
For IR-level, currently, LLVM have debugify + check-debugify to generate
and check debug IR. Much like the IR-level pass debugify, mir-debugify
inserts sequentially increasing line locations to each MachineInstr in a
Module, But there is no equivalent MIR-level check-debugify pass, So now
we support it at "mir-check-debug".
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D91595
Add mir-check-debug pass to check MIR-level debug info.
For IR-level, currently, LLVM have debugify + check-debugify to generate
and check debug IR. Much like the IR-level pass debugify, mir-debugify
inserts sequentially increasing line locations to each MachineInstr in a
Module, But there is no equivalent MIR-level check-debugify pass, So now
we support it at "mir-check-debug".
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D95195
[amdgpu] Default to code object v3
v4 is not yet readily available, and doesn't appear
to be implemented in the back end
Reviewed By: t-tye
Differential Revision: https://reviews.llvm.org/D93258
- Document which processors are supported by which runtimes.
- Add missing mappings for code object V2 note records
Differential Revision: https://reviews.llvm.org/D93016
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
This patch documents the MIR syntax for a number of things relevant to
debugging information:
* Trailing 'debug-location' metadata that becomes a DebugLoc,
* Variable location metadata for stack slots,
* Syntax for DBG_VALUE metainstructions,
* Syntax for DBG_INSTR_REF, including trailing instruction numbers
attached to MIR instructions.
Differential Revision: https://reviews.llvm.org/D89337
Petr Hosek