This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This started failing recently:
TestDarwinLogSourceDebug.py
It looks like the behavior of specifying the OS_ACTIVITY_MODE
env var with no value used to work for no-info/no-debug content.
That doesn't appear to be the case now. Switch to specifying
the proper value ('default') when no info-level and no debug-level
content is expected.
llvm-svn: 282172
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
This patch refactors the way the XState type is checked and, in order to
simplify the code, it removes the usage of the 'cpuid' instruction: just checking
if the ptrace calls done throuhg ReadFPR is enough to verify both if there is
HW support and if there is kernel support. Also the XCR0 bits are enough to check if
there is both HW and kernel support for AVX and MPX.
Differential Revision: https://reviews.llvm.org/D24764
llvm-svn: 282072
This converts Args::Unshift, Args::AddOrReplaceEnvironmentVariable,
and Args::ContainsEnvironmentVariable to use StringRefs. The code
is also simplified somewhat as a result.
llvm-svn: 281942
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
Initial implementation of support for tracking
[RenderScript Reductions](https://developer.android.com/guide/topics/renderscript/compute.html#reduction-in-depth)
With this patch, `language renderscript module dump` properly lists reductions
that are part of loaded RenderScript modules as well the the consituent
functions and their roles, within the reduction.
This support required new tracking mechanisms for the `#pragma(reduce)`
mechanism, and extension of `RSModuleDescriptor::ParseRSInfo` to support
the metadata output by `bcc`. This work was also an opportunity to
refactor/improve parse code:
- `RSModuleDescriptor::ParseExportReduceCount` now has a complete
implementation and the debugger can correctly track reductions on
receipt of a module hook.
- `RSModuleDescriptor::Dump` now dumps Reductions as well as `ForEach`
kernels. Also, fixed indentation of the output, and made indentation
groupings in the source clearer.
- `RSModuleDescriptor::ParseRSInfo` now returns true if the `".rs.info"`
packet has nonzero linecount, rather than rejecting RenderScripts that
don't contain kernels (an unlikely situation, but possibly valid). This
was changed because scripts that only contained reductions were not
being tracked in `RenderScriptRuntime::LoadModule`.
- Refactor `RSModuleInfo::ParseRSInfo` and add reduction spec parser stub
- Prepared ParseRSInfo to more easily be able to add new parser types
- Use llvm::StringRef and llvm::StringMap helpers to make the parsing code cleaner
- factor out forEachCount, globalVarCount, and pragmaCount parsing block to their own methods
- Add ExportReduceCount Parser
- Use `llvm::StringRef` in `RSKernelDescriptor` constructor
- removed now superfluous `MAXLINE` macros as we've switched from `const
char *` to `llvm::StringRef`
llvm-svn: 281717
It is a new attribute emitted by clang as a GNU extension and will
be part of Dwarf5. The purpose of the attribute is to specify a compile
unit level base value for all DW_AT_ranges to reduce the number of
relocations have to be done by the linker.
Fixes (at least partially): https://llvm.org/pr28826
Differential revision: https://reviews.llvm.org/D24514
llvm-svn: 281595
Summary:
This patch uses the instruction CPUID to verify that FXSAVE, XSAVE, AVX
and MPX are supported by the target hardware. In case the HW supports XSAVE,
and at least one of the extended register sets, it further checks if the
target software has the kernel support for such features, by verifying that
their XSAVE part is correctly managed.
Differential Revision: https://reviews.llvm.org/D24559
llvm-svn: 281507
Plumb unique_ptrs<> all the way through the baton interface.
NFC, this is a minor improvement to remove the possibility of an
accidental pointer ownership issue.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D24495
llvm-svn: 281360
Summary:
Added parsing of the MiscInfo data stream.
The main member of it that we care about is the process_id
On Linux generated Minidump (from breakpad) we don't have
the MiscInfo, we have the /proc/$pid/status from where we can get the
pid.
Also parsing the module list - the list of all of the loaded
modules/shared libraries.
Parsing the exception stream.
Parsing MinidumpStrings.
I have unit tests for all of that.
Also added some tests using a Minidump generated from Windows tools (not
from breakpad)
Reviewers: labath, zturner
Subscribers: beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D24385
llvm-svn: 281348
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an already-parsed structured data
element to taking just the packet contents.
* Moves the conversion of the JSON-async: packet contents from
GDBRemoteClientBase to the continuation delegate method.
* Adds a new unit test for verifying that the $JSON-asyc: packets get
decoded and that the decoded packets get forwarded on to the delegate
for further processing. Thanks to Pavel for making that whole section of
code easily unit testable!
* Tightens up the packet verification on reception of a $JSON-async:
packet contents. The code prior to this change is susceptible to a
segfault if a packet is carefully crafted that starts with $J but
has a total length shorter than the length of "$JSON-async:".
Reviewers: labath, clayborg, zturner
Differential Revision: https://reviews.llvm.org/D23884
llvm-svn: 281121
Summary:
LLVM guys did some clean-up of the Attribute getters/setters
and because of that the build was failing.
Reviewers: ldrumm
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24382
llvm-svn: 281030
The switch coveres all possible values. If a new one is added in the
future the compiler will start warning, providing a notification that
the switch needs updating.
llvm-svn: 280933
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
Most of these issues arose as a result of header re-ordering, but
it turned up a real bug, which is that MSVC doesn't support
__attribute__((packed)) or __attribute__((aligned)). This was
working before because there's a Windows header that #defines
__attribute__(x) to nothing. We should fix this by removing
that #define entirely, and dealing with the fallout separately
which may turn up even more bugs.
I fixed this by replacing them with the corresponding LLVM
macros which understand how to do these operations on all the
different compilers.
llvm-svn: 280757
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This reverts commit rL280668 because the register tests fail on i386
Linux.
I investigated a little bit what causes the failure - there are missing
registers when running 'register read -a'.
This is the output I got at the bottom:
"""
...
Memory Protection Extensions:
bnd0 = {0x0000000000000000 0x0000000000000000}
bnd1 = {0x0000000000000000 0x0000000000000000}
bnd2 = {0x0000000000000000 0x0000000000000000}
bnd3 = {0x0000000000000000 0x0000000000000000}
unknown:
2 registers were unavailable.
"""
Also looking at the packets exchanged between the client and server:
"""
...
history[308] tid=0x7338 < 19> send packet: $qRegisterInfo4a#d7
history[309] tid=0x7338 < 130> read packet:
$name:bnd0;bitsize:128;offset:1032;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:101;dwarf:101;#48
history[310] tid=0x7338 < 19> send packet: $qRegisterInfo4b#d8
history[311] tid=0x7338 < 130> read packet:
$name:bnd1;bitsize:128;offset:1048;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:102;dwarf:102;#52
history[312] tid=0x7338 < 19> send packet: $qRegisterInfo4c#d9
history[313] tid=0x7338 < 130> read packet:
$name:bnd2;bitsize:128;offset:1064;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:103;dwarf:103;#53
history[314] tid=0x7338 < 19> send packet: $qRegisterInfo4d#da
history[315] tid=0x7338 < 130> read packet:
$name:bnd3;bitsize:128;offset:1080;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:104;dwarf:104;#54
history[316] tid=0x7338 < 19> send packet: $qRegisterInfo4e#db
history[317] tid=0x7338 < 76> read packet:
$name:bndcfgu;bitsize:64;offset:1096;encoding:vector;format:vector-uint8;#99
history[318] tid=0x7338 < 19> send packet: $qRegisterInfo4f#dc
history[319] tid=0x7338 < 78> read packet:
$name:bndstatus;bitsize:64;offset:1104;encoding:vector;format:vector-uint8;#8e
...
"""
The bndcfgu and bndstatus registers don't have the 'Memory Protections
Extension' set. I looked at the code and it seems that that is set
correctly.
So I'm not sure what's the problem or where does it come from.
Also there is a second failure related to something like this in the
tests:
"""
registerSet.GetName().lower()
"""
For some reason the registerSet.GetName() returns None.
llvm-svn: 280703
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
Summary:
The Intel(R) Memory Protection Extensions (Intel(R) MPX) associates pointers
to bounds, against which the software can check memory references to
prevent out of bound memory access.
This patch allows accessing the MPX registers:
* bnd0-3: 128-bit registers to hold the bound values,
* bndcfgu, bndstatus: 64-bit configuration registers,
This patch also adds read/write tests for the MPX registers in the register
command tests and adds a new subdirectory for MPX specific tests.
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, granata.enrico, lldb-commits, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24187
llvm-svn: 280668
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
Summary:
This is a Minidump parsing code.
There are still some more structures/data streams that need to be added.
The aim ot this is to be used in the implementation of
a minidump debugging plugin that works on all platforms/architectures.
Currently we have a windows-only plugin that uses the WinAPI to parse
the dump files.
Also added unittests for the current functionality.
Reviewers: labath, amccarth
Subscribers: tberghammer, danalbert, srhines, lldb-commits, dschuff
Differential Revision: https://reviews.llvm.org/D23545
llvm-svn: 280356
Summary:
The vdso is full of hand-written assembly which the instruction emulator has a hard time
understanding. Luckily, the kernel already provides us with correct unwind info for them. So
let's use it.
This fixes (at least) the AssertingInferiorTestCase.test_inferior_asserting_disassemble test on
android N i386.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: https://reviews.llvm.org/D24079
llvm-svn: 280264
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
Summary:
e80f43fd78
greatly improved an API, but missed one more occurence of legacy usage.
This leads to:
if (extractor.GetHexBytes(&payload_bytes[0], payload_bytes.size(), '\xdd') != payload_bytes.size())
~~~~~~~~~~~~~~~~~~~~~ ^~~~~~
/lldb/include/lldb/Utility/StringExtractor.h:151:5: note: 'GetHexBytes' declared here
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24064
Author: Taras Tsugrii <ttsugrii@fb.com>
llvm-svn: 280202
Makes Peek() return a StringRef instead of a const char*.
This leads to a few callers of Peek() being able to be made a
little nicer (for example using StringRef member functions instead
of c-style strncmp and related functions) and generally safer
usage.
llvm-svn: 280139
MutableArrayRef<T> is essentially a safer version of passing around
(T*, length) pairs and provides some convenient functions for working
with the data without having to manually manipulate indices.
This is a minor NFC.
llvm-svn: 280123
StringExtractor::GetNameColonValue() looks for a substring of the
form "<name>:<value>" and returns <name> and <value> to the caller.
This results in two unnecessary string copies, since the name and
value are not translated in any way and simply returned as-is.
By converting this to return StringRefs we can get rid of hundreds
of string copies.
llvm-svn: 280000
This started as an effort to change StringExtractor to store a
StringRef internally instead of a std::string. I got that working
locally with just 1 test failure which I was unable to figure out the
cause of. But it was also a massive changelist due to a trickle
down effect of changes.
So I'm starting over, using what I learned from the first time to
tackle smaller, more isolated changes hopefully leading up to
a full conversion by the end.
At first the changes (such as in this CL) will seem mostly
a matter of preference and pointless otherwise. However, there
are some places in my larger CL where using StringRef turned 20+
lines of code into 2, drastically simplifying logic. Hopefully
once these go in they will illustrate some of the benefits of
thinking in terms of StringRef.
llvm-svn: 279917
Reports an error instead. We can fix this later to make persistent variables
work, but right now we hit an LLVM assertion if we get this wrong.
<rdar://problem/27770298>
llvm-svn: 279850
Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a couple of changes:
- The only caller of Read/WriteRegister, GDBRemoteRegisterContext class, was already acquiring
the mutex, so these functions do not need to. All functions which now do not take a lock, take
an lock argument instead, to remind the caller of this fact.
- GetThreadSuffixSupported() was being called from locked and unlocked contexts (including
contexts where the process was running, and the call would fail if it did not have the result
cached). I have split this into two functions, one which computes the thread suffix support and
caches it (this one always takes the lock), and another, which returns the cached value (and
never needs to take the lock). This feels quite natural as ProcessGdbRemote was already
pre-caching this value at the start.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23802
llvm-svn: 279725
and we couldn't find a dyld binary on the debug system, override
that setting and read dyld out of memory - we need to put an
internal breakpoint on dyld to register binaries being loaded or
unloaded; the debugger won't work right without dyld symbols.
<rdar://problem/27857025>
llvm-svn: 279704
PlatformRemoteAppleWatch, PlatformRemoteAppleTV and remove the
GetFileInSDKRoot method from those classes.
The rewrite uses the more modern FileSpec etc API to simplify,
and handles the case where an SDK Root is given to lldb with
the "/Symbols" directory name already appended. The new version
will try appending "/Symbols" and "/Symbols.Internal" to the
sdk root directories, and will also try appending nothing to
the sdk root directory in case it's handed such an sdkroot.
<rdar://problem/28000054>
llvm-svn: 279688
This is useful because that knowledge will in turn allow no-code-running formatting of boolean NSNumbers; but that's a commit that will have to wait Monday..
llvm-svn: 279353
Summary:
The tricky part here was that the exisiting implementation of WriteAllRegisters was expecting
hex-encoded data (as that was what the first implementation I replaced was using, but here we had
binary data to begin with. I thought the read/write register functions would be more useful if
they handled the hex-encoding themselves (all the other client functions provide the responses in
a more-or-less digested form). The read functions return a DataBuffer, so they can allocate as
much memory as they need to, while the write functions functions take an llvm::ArrayRef, as that
can be constructed from pretty much anything.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23659
llvm-svn: 279232
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
Summary:
Before this, each function had a copy of the code which handled appending of the thread suffix to
the packet (or using $Hg instead). I have moved that code into a single function and made
everyone else use that. The function takes the partial packet as a StreamString rvalue reference,
to avoid a copy and to remind the users that the packet will have undeterminate contents after
the call.
This also fixes the incorrect formatting of the QRestoreRegisterState packet in case thread
suffix is not supported.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23604
llvm-svn: 279040
Summary:
CPlusPlusLanguage::MethodName was not correctly parsing templated functions whose demangled name
included the return type -- the space before the function name was included in the "context" and
the context itself was not terminated correctly due to a misuse of the substr function (second
argument is length, not the end position). Fix that and add a regression test.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23608
llvm-svn: 279038
Summary:
When saving/restoring registers the GDBRemoteRegisterContext class was manually constructing
the register save/restore packets. This creates appropriate helper functions in
GDBRemoteCommunicationClient, and switches the class to use those. It also removes what a
duplicate packet send in some of those functions, a thing that I can only attribute to a bad
merge artefact.
I also add a test framework for testing gdb-remote client functionality and add tests for the new
functions I introduced. I'd like to be able to test the register context changes in isolation as
well, but currently there doesn't seem to be a way to reasonably construct a standalone register
context object, so we'll have to rely on the end-to-end tests to verify that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23553
llvm-svn: 278915
Despite its comment, the function is only used in the Client class, and its presence was merely
complicating mock implementation in unit tests.
llvm-svn: 278785
Summary:
referencing a user-defined operator new was triggering an assert in clang because we were
registering the function name as string "operator new", instead of using the special operator
enum, which clang has for this purpose. Method operators already had code to handle this, and now
I extend this to cover free standing operator functions as well. Test included.
Reviewers: spyffe
Subscribers: sivachandra, paulherman, lldb-commits
Differential Revision: http://reviews.llvm.org/D17856
llvm-svn: 278670
The commit started passing a nullptr port into GDBRemoteCommunication::StartDebugserverProcess.
The function was mostly handling the null value correctly, but it one case it did not check it's
value before assigning to it. Fix that.
llvm-svn: 278662
This change opens a socket pair and passes the second socket pair file descriptor down to the debugserver binary using a new option: "--fd=N" where N is the file descriptor. This file descriptor gets passed via posix_spawn() so that there is no need to do any bind/listen or bind/accept calls and eliminates the hanshake unix socket that is used to pass the result of the actual port that ends up being used so it can save time on launch as well as being faster.
This is currently only enabled on __APPLE__ builds. Other OSs should try modifying the #define from ProcessGDBRemote.cpp but the first person will need to port the --fd option over to lldb-server. Any OSs that enable USE_SOCKETPAIR_FOR_LOCAL_CONNECTION in their native builds can use the socket pair stuff. The #define is Apple only right now, but looks like:
#if defined (__APPLE__)
#define USE_SOCKETPAIR_FOR_LOCAL_CONNECTION 1
#endif
<rdar://problem/27814880>
llvm-svn: 278524
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
Factor out some common logic used to find the runtime library in a list
of modules.
Differential Revision: https://reviews.llvm.org/D23150
llvm-svn: 278368
Adapters for instrumentation runtimes have to do two basic things:
1) Load a runtime library.
2) Install breakpoints in that library.
This logic is duplicated in the adapters for asan and tsan. Factor it
out and document bits of it to make it easier to add new adapters.
I tested this with check-lldb, and double-checked
testcases/functionalities/{a,t}san.
Differential Revision: https://reviews.llvm.org/D23043
llvm-svn: 278367
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TEST vs. TEST_F)
- the new code did not correctly handle the case where we went to interrupt the process, but it
stopped due to a different reason - the interrupt request would remain queued and would
interfere with the following "continue". I also added a unit test for this case.
This reapplies r277156 and r277139.
llvm-svn: 278118
also take the opportunity to replace NULL with nullptr and add clang-format guards to prevent it
from messing up the nice table there.
llvm-svn: 278005
Zachary Turner