Summary:
Problem:
There are three filelds in the ELF header - e_phnum, e_shnum, and e_shstrndx -
that could be bigger than 64K and therefore do not fit in 16 bits reserved for
them in the header. If this happens, pretty often there is a special section at
index 0 which contains their real values for these fields in the section header
in the fields sh_info, sh_size, and sh_link respectively.
Fix:
- Rename original fields in the header declaration. We want to have them around
just in case.
- Reintroduce these fields as 32-bit members at the end of the header. By default
they are initialized from the header in Parse() method.
- In Parse(), detect the situation when the header might have been extended into
section info #0 and try to read it from the same data source.
- ObjectFileELF::GetModuleSpecifications accesses some of these fields but the
original parse uses too small data source. Re-parse the header if necessary
using bigger data source.
- ProcessElfCore::CreateInstance uses header with potentially sentinel values,
but it does not access these fields, so a comment here is enough.
Reviewers: labath
Reviewed By: labath
Subscribers: davidb, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29095
Author: Eugene Birukov <eugenebi@hotmail.com>
llvm-svn: 293714
This diff
1. Adds a comment to ObjectFileELF.cpp about the current
approach to determining the OS.
2. Replaces the check in SymbolFileDWARF.cpp with a more robust one.
Test plan:
Built (on Linux) a test binary linked to a c++ shared library
which contains just an implementation of a function TestFunction,
the library (the binary itself) doesn't contain ELF notes
and EI_OSABI is set to System V.
Checked in lldb that now "p TestFunction()" works fine
(and doesn't work without this patch).
Differential revision: https://reviews.llvm.org/D27380
llvm-svn: 288687
Summary:
ObjectFileELF::RefineModuleDetailsFromNote() identifies Linux core dumps by searching for
library paths starting with /lib/x86_64-linux-gnu or /lib/i386-linux-gnu. This change widens the
test to allow for linux installations which have addition directories in the path.
Reviewers: ted, hhellyer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25179
llvm-svn: 284114
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Summary:
There were places in the code, assuming(hardcoding) offsets
and types that were only valid for the x86_64 elf core file format.
The NT_PRSTATUS and NT_PRPSINFO structures are with the 64 bit layout.
I have reused them and parse i386 files manually, and fill them in the
same struct.
Also added some error handling during parsing that checks if the
available bytes in the buffer are enough to fill the structures.
The i386 core file test case now passes.
For reference on the structures layout, I generally used the
source of binutils (bfd, readelf)
Bug: https://llvm.org/bugs/show_bug.cgi?id=26947
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22917
llvm-svn: 277140
These are artifical symbols inside android oat files without any value
for the user while causing a significant perfoamce hit inside the
unwinder. We were already ignoring it inside system@framework@boot.oat
bot they have to be ignored in every oat file. Considering that oat
files are only used on android this have no effect on any other
platfrom.
llvm-svn: 274500
In order to make this happen, I have added permissions to sections so that we can know what the permissions are for a given section, and modified both core file plug-ins to override Process::GetMemoryRegionInfo() and answer things correctly.
llvm-svn: 272276
Patch by Nitesh Jain.
Summary: These patch fix thread step-out for hard and soft float.
Reviewers: jaydeep, bhushan, clayborg
Differential Revision: http://reviews.llvm.org/D20416
llvm-svn: 270564
The CL causes a build breakage on platforms where sizeof(double) == sizeof(long double)
and it incorrectly assumes that sizeof(double) and sizeof(long double) is the same
on the host and the target.
llvm-svn: 270214
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Patch by Nitesh Jain.
Summary: The ArchSpec::m_flags will be set based on ELF flag ABI.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits, mohit.bhakkad, sagar, jaydeep, bhushan
Differential: D18858
llvm-svn: 269181
Remove case handling elf arm attribute Tag_THUMB_ISA_use and setting architecture to thumb.
Differential revision: http://reviews.llvm.org/D19520
llvm-svn: 267550
Make sure we figure out correct plt entry field in case linker has generated a small value below realistic entry size like 4 bytes or below.
Differential revision: http://reviews.llvm.org/D19252
llvm-svn: 267405
RegisterContextLLDB::InitializeNonZerothFrame already has code to attempt
to detect and handle the case where the PC points beyond the end of a
function, but there are certain cases where this doesn't work correctly.
In fact, there are *two* different places where this detection is attempted,
and the failure is in fact a result of an unfortunate interaction between
those two separate attempts.
First, the ResolveSymbolContextForAddress routine is called with the
resolve_tail_call_address flag set to true. This causes the routine
to internally accept a PC pointing beyond the end of a function, and
still resolving the PC to that function symbol.
Second, the InitializeNonZerothFrame routine itself maintains a
"decr_pc_and_recompute_addr_range" flag and, if that turns out to
be true, itself decrements the PC by one and searches again for
a symbol at that new PC value.
Both approaches correctly identify the symbol associated with the PC.
However, the problem is now that later on, we also need to find the
DWARF CFI record associated with the PC. This is done in the
RegisterContextLLDB::GetFullUnwindPlanForFrame routine, and uses
the "m_current_offset_backed_up_one" member variable.
However, that variable only actually contains the PC "backed up by
one" if the *second* approach above was taken. If the function was
already identified via the first approach above, that member variable
is *not* backed up by one but simply points to the original PC.
This in turn causes GetEHFrameUnwindPlan to not correctly identify
the DWARF CFI record associated with the PC.
Now, in many cases, if the first method had to back up the PC by one,
we *still* use the second method too, because of this piece of code:
// Or if we're in the middle of the stack (and not "above" an asynchronous event like sigtramp),
// and our "current" pc is the start of a function...
if (m_sym_ctx_valid
&& GetNextFrame()->m_frame_type != eTrapHandlerFrame
&& GetNextFrame()->m_frame_type != eDebuggerFrame
&& addr_range.GetBaseAddress().IsValid()
&& addr_range.GetBaseAddress().GetSection() == m_current_pc.GetSection()
&& addr_range.GetBaseAddress().GetOffset() == m_current_pc.GetOffset())
{
decr_pc_and_recompute_addr_range = true;
}
In many cases, when the PC is one beyond the end of the current function,
it will indeed then be exactly at the start of the next function. But this
is not always the case, e.g. if there happens to be alignment padding
between the end of one function and the start of the next.
In those cases, we may sucessfully look up the function symbol via
ResolveSymbolContextForAddress, but *not* set decr_pc_and_recompute_addr_range,
and therefore fail to find the correct DWARF CFI record.
A very simple fix for this problem is to just never use the first method.
Call ResolveSymbolContextForAddress with resolve_tail_call_address set
to false, which will cause it to fail if the PC is beyond the end of
the current function; or else, identify the next function if the PC
is also at the start of the next function. In either case, we will
then set the decr_pc_and_recompute_addr_range variable and back up the
PC anyway, but this time also find the correct DWARF CFI.
A related problem is that the ResolveSymbolContextForAddress sometimes
returns a "symbol" with empty name. This turns out to be an ELF section
symbol. Now, usually those get type eSymbolTypeInvalid. However, there
is code in ObjectFileELF::ParseSymbols that tries to change the type of
invalid symbols to eSymbolTypeCode or eSymbolTypeData if the symbol
lies within the code or data section.
Unfortunately, this check also hits the symbol for the code section
itself, which is then marked as eSymbolTypeCode. While the size of
the section symbol is 0 according to the ELF file, LLDB considers
this size invalid and attempts to figure out the "correct" size.
Depending on how this goes, we may end up with a symbol that overlays
part of the code section, even outside areas covered by real function
symbols.
Therefore, if we call ResolveSymbolContextForAddress with PC pointing
beyond the end of a function, we may get this bogus section symbol.
This again means InitializeNonZerothFrame thinks we have a valid PC,
but then we don't find any unwind info for it.
The fix for this problem is me to simply always leave ELF section
symbols as type eSymbolTypeInvalid.
Differential Revision: http://reviews.llvm.org/D18975
llvm-svn: 267363
This adds basic parsing of the EABI attributes section. This section contains
additional information about the target for which the file was built. Attempt
to infer additional architecture information from that section.
llvm-svn: 267291
Code in ObjectFileELF::ParseTrampolineSymbols assumes that the sh_info
field of the .rel(a).plt section identifies the .plt section.
However, with recent GNU ld this is no longer true. As a result of this:
https://sourceware.org/bugzilla/show_bug.cgi?id=18169
in object files generated with current linkers the sh_info field of
.rel(a).plt now points to the .got.plt section (or .got on some targets).
This causes LLDB to fail to identify any PLT stubs, causing a number of
test case failures.
This patch changes LLDB to simply always look for the .plt section by
name. This should be safe across all linkers and targets.
Differential Revision: http://reviews.llvm.org/D18973
llvm-svn: 266316
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Build-id support is being added to lld and by default it may produce a
64-bit build-id.
Prior to this change lldb would reject such a build-id. However, it then
falls back to a 4-byte crc32, which is a poorer quality identifier.
Differential Revision: http://reviews.llvm.org/D18096
llvm-svn: 263432
Most address represented in lldb as section plus offset and handling of
absolute addresses is problematic in several location because of lack
of necessary information (e.g. Target) or because of performance issues.
This CL change the way ObjectFileELF handle the absolute symbols with
creating a pseudo section for each symbol. With this change all existing
code designed to work with addresses in the form of section plus offset
will work with absolute symbols as well.
Differential revision: http://reviews.llvm.org/D17450
llvm-svn: 261859
* Generate artificial symbol names from eh_fame during symbol parsing
so these symbols are already present when we calcualte the size of
the symbols where 0 is specified.
* Fix symbol size calculation for the last symbol in the file where
it have to last until the end of the parent section.
This is the re-commit of the original change after fixing some test
failures on OSX.
Differential revision: http://reviews.llvm.org/D16996
llvm-svn: 261205
* Generate artificial symbol names from eh_fame during symbol parsing
so these symbols are already present when we calcualte the size of
the symbols where 0 is specified.
* Fix symbol size calculation for the last symbol in the file where
it have to last until the end of the parent section.
Differential revision: http://reviews.llvm.org/D16996
llvm-svn: 260369
This patch adds logic to detect if underlying binary is using arm hard float abi and use that information while handling return values in ABISysV_arm.
Differential revision: http://reviews.llvm.org/D16627
llvm-svn: 259885
Summary:
The issue arises because LLDB is not
able to read the vdso library correctly.
The fix adds memory allocation callbacks
to allocate sufficient memory in case the
requested offsets don't fit in the memory
buffer allocated for the ELF.
Reviewers: lldb-commits, clayborg, deepak2427, ovyalov, labath, tberghammer
Differential Revision: http://reviews.llvm.org/D16107
llvm-svn: 258122
The ELF symbol table always contain the size of the symbols so we
don't have to try to guess them based on the address of the next
symbol (it is needed for mach-o).
The change fixes an issue when a symbol is removed after a 0 size
symbol (e.g. because the second one is not public) what previously
caused the symbol lookup algorithm to end up with showing the 0 size
symbol even for the later addresses (what are not part of any symbol).
That symbol lookup error can confuse the user and also confuses the
current stack unwinder.
Re-commit this CL after fixing the issue with gcc-4.9.2 on i386 Linux.
Differential revision: http://reviews.llvm.org/D16186
llvm-svn: 258113
The ELF symbol table always contain the size of the symbols so we
don't have to try to guess them based on the address of the next
symbol (it is needed for mach-o).
The change fixes an issue when a symbol is removed after a 0 size
symbol (e.g. because the second one is not public) what previously
caused the symbol lookup algorithm to end up with showing the 0 size
symbol even for the later addresses (what are not part of any symbol).
That symbol lookup error can confuse the user and also confuses the
current stack unwinder.
Differential revision: http://reviews.llvm.org/D16186
llvm-svn: 258040
Summary:
This was used with the old ARM vs. Thumb detection code but is not
required anymore.
Reviewers: tberghammer, clayborg
Subscribers: fjricci, aemerson, lldb-commits, rengolin
Differential Revision: http://reviews.llvm.org/D16099
llvm-svn: 257429
(There are changes in the copies of these four files in the FreeBSD base
system, and I've changed these ones to reduce gratuitous diffs in future
imports.)
llvm-svn: 256723
Summary:
DWARF 5 proposes a reinvented .debug_macro section. This change follows
that spec.
Currently, only GCC produces the .debug_macro section and hence
the added test is annottated with expectedFailureClang.
Reviewers: spyffe, clayborg, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15437
llvm-svn: 255729
To do this I added a few new ways to determine the OS from PT_NOTE notes in the ELF file:
1 - Look for "LINUX" notes which indicate "linux" should be the OS
2 - Look through the "CORE" notes with NT_FILE as the type and sniff data from the paths listed in this section. On Ubuntu they contain "/lib/x86_64-linux-gnu" which has the triple and allows us to set "linux" as the OS in the architecture returned from ObjectFileELF::GetArchitecture().
Setting the OS correctly allows us to get the triple correct so we can extract registers without asserting and killing LLDB.
Also use the data from the NT_FILE to set the main executable if one isn't set in ProcessElfCore::DoLoadCore().
llvm-svn: 251537
* Remove an unneccessary re-computaion on arch spec from the ELF file
* Use a local cache to optimize name based section lookups in symtab
parsing
* Optimize C++ method basename validation with replacing a regex with
hand written code
These modifications reduce the time required to parse the symtab from
large applications by ~25% (tested with LLDB as inferior)
Differential revision: http://reviews.llvm.org/D14088
llvm-svn: 251402
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
GP registers for o32 applications were always giving zero value because SetType() on the RegisterValue was causing the accessor functions to pickup the value from m_scalar of RegisterValue which is zero.
In this patch byte size and byte order of register value is set at the time of setting the value of the register.
llvm-svn: 249020
.ARM.exidx/.ARM.extab sections contain unwind information used on ARM
architecture from unwinding from an exception.
Differential revision: http://reviews.llvm.org/D13245
llvm-svn: 248903
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
SUMMARY:
This patch provides support for MIPS specific DT_MIPS_RLD_MAP_REL tag in LLDB.
This tag allows debugging of MIPS position independent executables and provides access to shared library information.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D12794
llvm-svn: 247666
Change the mapping symbol handling to handle the case when the mapping
symbols are prefixed with an arbitrary prefix. This isn't strictly standard
compliance, but if all symbols in an object file is prefixed with objcopy
then the prefix will be added to the mapping symbol also. We still want to
treat these symbols as mapping symbols to get the correct address class data.
Differential revision: http://reviews.llvm.org/D12755
llvm-svn: 247400
* Create new dwo symbol file class
* Add handling for .dwo sections
* Change indexes in SymbolFileDWARF to store compile unit offset next to
DIE offset
* Propagate queries from dwarf compile unit to the dwo compile unit
where applicable
Differential revision: http://reviews.llvm.org/D12291
llvm-svn: 247132
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
These are 2 new value currently in experimental status used when split
debug info is enabled.
Differential revision: http://reviews.llvm.org/D12238
llvm-svn: 245931
The POSIX linker generally reports the load bias for the loaded
libraries but in some case it is useful to handle a library based on
absolute load address. Example usecases:
* Windows linker uses absolute addresses
* Library list came from different source (e.g. /proc/<pid>/maps)
Differential revision: http://reviews.llvm.org/D12233
llvm-svn: 245834
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
On Android the oatdata and the oatexec symbols in
system@framework@boot.oat covers the full .text section what causes
issues with displaying unusable symbol name to the user and very slow
unwinding speed because the instruction emulation based unwind plans
try to emulate all instructions in these symbols. Don't add these
symbols to the symbol list as they have no use for the debugger and
they are causing a lot of trouble.
Differential revision: http://reviews.llvm.org/D11065
llvm-svn: 242017
Summary: Use string::find(char) for single character strings.
Reviewers: abidh, ki.stfu, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10943
llvm-svn: 241390
* Add in-memory object file handling to the core dynamic loader
* Fix in memory object file handling in ObjectFileELF (previously
only part of the file was loaded before parsing)
* Fix load address setting in ObjectFileELF for 32-bit targets
when the load bias is negative
* Change hack in DYLDRendezvous.cpp to be more specific and not to
interfere with object files with fixed load address
Differential revision: http://reviews.llvm.org/D10800
llvm-svn: 241057
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
Setting the OSType in the ArchSpec triple is needed to correctly setup
up the register context plugin. ArchSpec::SetArchitecture, for Mach-O
only, sets the OSType. For ELF it was left to the ObjectFileELF to fill
in the missing OSType.
This change moves the ObjectFileELF logic into ArchSpec.
A new optional 'os' parameter has been added to SetArchitecture.
For ELF, this value is the from the ELF header.e_ident[EI_OSABI].
The default value is 0 or ELFOSABI_NONE.
The real work of determining the OSType was done by the ObjectFileELF
helper function GetOsFromOSABI. This logic has been moved
SetArchitecture.
GetOsFromOSABI has been commented as being deprectated. It is left in
to support asserts.
For ELF the vendor value returned from SetArchitecture should be
UnknownVendor. An unneeded resetting in ObjectFileELF has been removed
and replaced with an assert.
This fixes a problem reading a core file on FreeBSD/ARM because the spec
triple was arm-unknown-unknown.
Patch by Tom Rix.
Differential Revision: http://reviews.llvm.org/D9292
llvm-svn: 239148
The ELF data contains two different errors in some ELF files on android.
* The link field of the symbol table don't point to the plt section or
to the dynsym section even when it is present in the ELF files.
* The size of the plt entries aren't specified in the section header of
the plt section.
This CL adds some workarounds for these two issue with finding the
sections by name if the link field is empty and by using a heuristic to
calculate the size and offset of the plt entries.
Differential revision: http://reviews.llvm.org/D9560
llvm-svn: 236818
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
The debug info section contains some $d mapping symbol what is
overlapping with code sections in other sections of the object file
causing problem in the address class detection. This CL ignores these
symboles from the address class map as the debug info sections don't use
this map.
Differential revision: http://reviews.llvm.org/D9050
llvm-svn: 235171
ELF symbol tables on aarch64 may contains some mapping symbols. They
provide information about the underlying data but interfere with symbol
look-up of lldb. They are already ignored on arm32. With this CL they
will be ignored on aarch64 also.
Differential revision: http://reviews.llvm.org/D8776
llvm-svn: 234307
In android a .note.android.ident section header is added to the elf
files to provide information for the debuggers that it is an android
specific module. This CL add logic to parse it out from the elf files
and set the module specification based on it.
Differential revision: http://reviews.llvm.org/D8377
llvm-svn: 232625
Summary:
Symbol table generation code was failing to take into account the debug symbols because
the object file was looking only into its own section list when doing the generation, even though
the debug symbols from another object file were correctly detected and loaded by the
SymbolVendor. This changes the code to use the unified section list, which fixes this problem.
Test Plan:
I do not intend do submit this yet since it causes (or more like, exposes) the issue
in D7884, but I wanted to put this out here, so that anyone who wants to take a look at it can do
so. (And I also wanted to know if this is the right approach to the problem :).
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7913
llvm-svn: 231229
Summary:
Symbols in ELF files can be versioned, but LLDB currently does not understand these. This problem
becomes apparent once one loads glibc with debug info. Here (in the .symtab section) the versions
are embedded in the name (name@VERSION), which causes issues when evaluating expressions
referencing memcpy for example (current glibc contains memcpy@@GLIBC_2.14 and
memcpy@GLIBC_2.2.5).
This problem was not evident without debug symbols as the .dynsym section
stores the bare names and the actual versions are present in a separate section (.gnu.version_d),
which LLDB ignores. This resulted in two definitions of memcpy in the symbol table.
This patch adds support for storing annotated names to the Symbol class. If
Symbol.m_contains_linker_annotations is true then this symbol is annotated. Unannotated name can
be obtained by calling StripLinkerAnnotations on the corresponding ObjectFile. ObjectFileELF
implements this to strip @VERSION suffixes when requested. Symtab uses this function to add the
bare name as well as the annotated name to the name lookup table.
To preserve the size of the Symbol class, I had to steal one bit from the m_type field.
Test Plan:
This fixes TestExprHelpExamples.py when run with a glibc with debug symbols. Writing
an environment agnostic test case would require building a custom shared library with symbol
versions and testing symbol resolution against that, which is somewhat challenging.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8036
llvm-svn: 231228
This is implemented by making a new FileSystem function:
bool
FileSystem::IsLocal(const FileSpec &spec)
Then using this in a new function:
DataBufferSP
FileSpec::MemoryMapFileContentsIfLocal(off_t file_offset, size_t file_size) const;
This function only mmaps data if the file is a local file since that means we can reliably page in data. We were experiencing crashes where people would use debug info files on network mounted file systems and that mount would go away and cause the next access to a page that wasn't paged in to crash LLDB.
We now avoid this by just copying the data into a heap buffer and keeping a permanent copy to avoid the crash. Updated all previous users of FileSpec::MemoryMapFileContentsIfLocal() in ObjectFile subclasses over to use the new FileSpec::MemoryMapFileContentsIfLocal() function.
<rdar://problem/19470249>
llvm-svn: 230283
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
Recognise the SHT_NOBITS property in kalimba ELF, and determine this to be
of type zerofilled. Subsequently recognise this type to represent bytes
on the target's DATA address space, and therefore be sized accordingly.
llvm-svn: 219782
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
This allows us to fixup the address of the symbol as soon as we parse it
so that lldb is not confused thinking there are two different symbols in
the binary (one with the thumb bit, one without). Also, differentiating
between THUMB and ARM symbols allows the debugger to place the right
type of breakpoint.
Change by Stephane Sezer.
llvm-svn: 217841
ELF objects contain marker symbols to differentiate between ARM and
THUMB functions. Instead of storing them internally and having garbage
show up when symbols are searched for by the user, we can just skip them
and not store them at all, as we never actually need them.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64
MacOSX 10.9.4 x86_64
llvm-svn: 217782
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
Pavel Labath