There is no need to check for enabled pragma for core or optional core features,
thus this check is removed
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D97058
It's available both in CodeGenOptions and in LangOptions, and LangOptions
implementation is slightly better as it uses a StringRef instead of a char
pointer, so use it.
Differential Revision: https://reviews.llvm.org/D98175
This is the first patch supporting M68k in Clang
- Register M68k as a target
- Target specific CodeGen support
- Target specific attribute support
Authors: myhsu, m4yers, glaubitz
Differential Revision: https://reviews.llvm.org/D88393
This changes the target data layout to make stack align to 16 bytes
on Power10. Before this change, stack was being aligned to 32 bytes.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D96265
gfx1030 added a new way to implement readcyclecounter using the
SHADER_CYCLES hardware register, but the s_memtime instruction still
exists, so the MC layer should still accept it and the
llvm.amdgcn.s.memtime intrinsic should still work.
Differential Revision: https://reviews.llvm.org/D97928
Use that to print the diagnostic in SemaChecking instead of
listing all of the builtins in a switch.
With the required features, IR generation will also be able
to error on this. Checking this here allows us to have a RISCV
focused error message.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D97826
This commit refactors extension support to allow
specifying whether pragma is needed or not explicitly.
For backward compatibility pragmas are set to required
for all extensions that were added prior to this but
not for OpenCL 3.0 features.
Differential Revision: https://reviews.llvm.org/D97052
Exchanging types, reordering fields and borrowing a bit from OptionGroupIndex shrinks this from 12 bytes to 8.
This knocks ~20k from the binary size.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D97553
Use the fact that the number of line break is lower than printable characters to
guide the optimization process. Also use a fuzzy test that catches both \n and
\r in a single check to speedup the computation.
Differential Revision: https://reviews.llvm.org/D97320
Post D96572, a warning started showing up for me:
`clang/lib/Basic/Sanitizers.cpp:73:1: warning: control reaches end of non-void function [-Wreturn-type]`
So this adds a default to the case to return invalid, which seems appropriate,
and appears to correct the issue.
Differential Revision: https://reviews.llvm.org/D97496
The new `-fsanitize-address-destructor-kind=` option allows control over how module
destructors are emitted by ASan.
The new option is consumed by both the driver and the frontend and is propagated into
codegen options by the frontend.
Both the legacy and new pass manager code have been updated to consume the new option
from the codegen options.
It would be nice if the new utility functions (`AsanDtorKindToString` and
`AsanDtorKindFromString`) could live in LLVM instead of Clang so they could be
consumed by other language frontends. Unfortunately that doesn't work because
the clang driver doesn't link against the LLVM instrumentation library.
rdar://71609176
Differential Revision: https://reviews.llvm.org/D96572
Demonstrate how to add RISC-V V builtins and lower them to IR intrinsics for V extension.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93446
This (mostly) reverts 32c501dd88. Hit a
case where this causes a behaviour change, perhaps the same root cause
that triggered the revert of a40db5502b in
7799ef7121.
(The API changes in DirectoryEntry.h have NOT been reverted as a number
of subsequent commits depend on those.)
https://reviews.llvm.org/D90497#2582166
This patch responds to a comment from @vitalybuka in D96203: suggestion to
do the change incrementally, and start by modifying this file name. I modified
the file name and made the other changes that follow from that rename.
Reviewers: vitalybuka, echristo, MaskRay, jansvoboda11, aaron.ballman
Differential Revision: https://reviews.llvm.org/D96974
Added -mrop-protection for Power PC to turn on codegen that provides some
protection from ROP attacks.
The option is off by default and can be turned on for Power 8, Power 9 and
Power 10.
This patch is for the option only. The feature will be implemented by a later
patch.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D96512
Add the types for the RISC-V V extension builtins.
These types will be used by the RISC-V V intrinsics which require
types of the form <vscale x 1 x i64>(LMUL=1 element size=64) or
<vscale x 4 x i32>(LMUL=2 element size=32), etc. The vector_size
attribute does not work for us as it doesn't create a scalable
vector type. We want these types to be opaque and have no operators
defined for them. We want them to be sizeless. This makes them
similar to the ARM SVE builtin types. But we will have quite a bit
more types. This patch adds around 60. Later patches will add
another 230 or so types representing tuples of these types similar
to the x2/x3/x4 types in ARM SVE. But with extra complexity that
these types are combined with the LMUL concept that is unique to
RISCV.
For more background see this RFC
http://lists.llvm.org/pipermail/llvm-dev/2020-October/145850.html
Authored-by: Roger Ferrer Ibanez <roger.ferrer@bsc.es>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D92715
The tile directive is in OpenMP's Technical Report 8 and foreseeably will be part of the upcoming OpenMP 5.1 standard.
This implementation is based on an AST transformation providing a de-sugared loop nest. This makes it simple to forward the de-sugared transformation to loop associated directives taking the tiled loops. In contrast to other loop associated directives, the OMPTileDirective does not use CapturedStmts. Letting loop associated directives consume loops from different capture context would be difficult.
A significant amount of code generation logic is taking place in the Sema class. Eventually, I would prefer if these would move into the CodeGen component such that we could make use of the OpenMPIRBuilder, together with flang. Only expressions converting between the language's iteration variable and the logical iteration space need to take place in the semantic analyzer: Getting the of iterations (e.g. the overload resolution of `std::distance`) and converting the logical iteration number to the iteration variable (e.g. overload resolution of `iteration + .omp.iv`). In clang, only CXXForRangeStmt is also represented by its de-sugared components. However, OpenMP loop are not defined as syntatic sugar. Starting with an AST-based approach allows us to gradually move generated AST statements into CodeGen, instead all at once.
I would also like to refactor `checkOpenMPLoop` into its functionalities in a follow-up. In this patch it is used twice. Once for checking proper nesting and emitting diagnostics, and additionally for deriving the logical iteration space per-loop (instead of for the loop nest).
Differential Revision: https://reviews.llvm.org/D76342
The patch only plumbs through the option necessary for targeting sm_86 GPUs w/o
adding any new functionality.
Differential Revision: https://reviews.llvm.org/D95974
This patch implements generation of remaining codegen options and tests it by performing parse-generate-parse round trip.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D96056
This patch implements generation of remaining language options and tests it by performing parse-generate-parse round trip (on by default for assert builds, off otherwise).
This patch also correctly reports failures in `parseSanitizerKinds`, which is necessary for emitting diagnostics when an invalid sanitizer is passed to `-fsanitize=` during round-trip.
This patch also removes TableGen marshalling classes from two options:
* `fsanitize_blacklist` When parsing: it's first initialized via the generated code, but then also changed by manually written code, which is confusing.
* `fopenmp` When parsing: it's first initialized via generated code, but then conditionally changed by manually written code. This is also confusing. Moreover, we need to do some extra checks when generating it, which would be really cumbersome in TableGen. (Specifically, not emitting it when `-fopenmp-simd` was present.)
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D95793
Currently the emscripten frontend driver injects this when building
with thread support. Moving this into the clang driver itself makes
the emscripten python driver less magical.
Differential Revision: https://reviews.llvm.org/D96171
This patch adds possibility to define OpenCL C 3.0 feature macros
via command line option or target setting.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D95776
Commit 6bf29dbb enables float128 feature by default for Power9 targets.
But float128 may cause build failure in libcxx testing. Revert this
commit first to unblock LLVM 12 release.
When the -matomics feature is not enabled, disable POSIXThreads
mode and set the thread model to Single, so that we don't predefine
macros like `__STDCPP_THREADS__`.
Differential Revision: https://reviews.llvm.org/D96091
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
The `LangStandard::Kind` parsed from command line arguments is used to set up some `LangOption` defaults, but isn't stored anywhere.
To be able to generate `-std=` (in future patch), we need `CompilerInvocation` to not forget it.
This patch demonstrates another use-case: using `LangStd` to set up defaults of marshalled options.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D95342
Change `SourceManager::getOrCreateContentCache` to take a `FileEntryRef`
and update call sites (mostly internal to SourceManager.cpp). In a
couple of cases this temporarily relies on `FileEntry::getLastRef`, but
those can be cleaned up once other APIs switch over.
The one change outside of SourceManager.cpp is in ASTReader.cpp, which
stops relying on the auto-degrade-to-`FileEntry*` behaviour from
`InputFile::getFile` since it now needs a `FileEntryRef`.
No functionality change here.
Differential Revision: https://reviews.llvm.org/D92983
Change `SourceManager::createFileID(const FileEntry*)` to defer to
`SourceManager::createFileID(FileEntryRef)`. This fixes an unexercised
bug where the latter gained support for named pipes and the former
didn't, but since we're trying to remove all calls to the former it
doesn't really make sense to test this explicitly now that the
implementation is hollowed out.
This is a belated follow-up to 245218bb35,
which sunk named pipe support into FileManager and SourceManager. The
original version of that patch was based on top of
https://reviews.llvm.org/D92984, which removed the `FileEntry` overload
of `createFileID()`, and I missed the subtle difference when it was
rebased.
Currently, there is some refactoring needed in existing interface of OpenCL option
settings to support OpenCL C 3.0. The problem is that OpenCL extensions and features
are not only determined by the target platform but also by the OpenCL version.
Also, there are core extensions/features which are supported unconditionally in
specific OpenCL C version. In fact, these rules are not being followed for all targets.
For example, there are some targets (as nvptx and r600) which don't support
OpenCL C 2.0 core features (nvptx.languageOptsOpenCL.cl, r600.languageOptsOpenCL.cl).
After the change there will be explicit differentiation between optional core and core
OpenCL features which allows giving diagnostics if target doesn't support any of
necessary core features for specific OpenCL version.
This patch also eliminates `OpenCLOptions` instance duplication from `TargetOptions`.
`OpenCLOptions` instance should take place in `Sema` as it's going to be modified
during parsing. Removing this duplication will also allow to generally simplify
`OpenCLOptions` class for parsing purposes.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D92277
The class `SymbolOccurrences` can store either a single `SourceRange`
in-place or multiple `SourceRanges` on the heap. In the latter case
the number of source ranges is stored in the internal representation
of the beginning `SourceLocation` of the in-place `SourceRange`
object.
This change gets rid of such hack by placing `SourceRange` in a union
which holds either a valid `SourceRange` or an `unsigned int` (a number
of ranges).
The change also adds `static_assert`s that check that `SourceRange` and
`SourceLocation` are trivially destructible (this is required for the
current patch and for D94237 which has already been committed).
Reviewed By: MarkMurrayARM, simon_tatham
Differential Revision: https://reviews.llvm.org/D94599
This introduces the ARMv8.7-A LS64 extension's intrinsics for 64 bytes
atomic loads and stores: `__arm_ld64b`, `__arm_st64b`, `__arm_st64bv`,
and `__arm_st64bv0`. These are selected into the LS64 instructions
LD64B, ST64B, ST64BV and ST64BV0, respectively.
Based on patches written by Simon Tatham.
Reviewed By: tmatheson
Differential Revision: https://reviews.llvm.org/D93232
PowerPC cores like e200z759n3 [1] using an efpu2 only support single precision
hardware floating point instructions. The single precision instructions efs*
and evfs* are identical to the spe float instructions while efd* and evfd*
instructions trigger a not implemented exception.
This patch introduces a new command line option -mefpu2 which leads to
single-hardware / double-software code generation.
[1] Core reference:
https://www.nxp.com/files-static/32bit/doc/ref_manual/e200z759CRM.pdf
Differential revision: https://reviews.llvm.org/D92935
With the internal clang extension '__cl_clang_variadic_functions'
variadic functions are accepted by the frontend.
This is not a fully supported vendor/Khronos extension
as it can only be used on targets with variadic prototype
support or in metaprogramming to represent functions with
generic prototype without calling such functions in the
kernel code.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D94027
The new clang internal extension '__cl_clang_function_pointers'
allows use of function pointers and other features that have
the same functionality:
- Use of member function pointers;
- Unrestricted use of references to functions;
- Virtual member functions.
This not a vendor extension and therefore it doesn't require any
special target support. Exposing this functionality fully
will require vendor or Khronos extension.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D94021
We supports SjLj exception handling in the backend, so changing
clang to allow lowering using SjLj exceptions. Update a regression
test also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D94076
Add powerpcle support to clang.
For FreeBSD, assume a freestanding environment for now, as we only need it in the first place to build loader, which runs in the OpenFirmware environment instead of the FreeBSD environment.
For Linux, recognize glibc and musl environments to match current usage in Void Linux PPC.
Adjust driver to match current binutils behavior regarding machine naming.
Adjust and expand tests.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93919
Add support for stdin to SourceManager and FileManager. Adds
FileManager::getSTDIN, which adds a FileEntryRef for `<stdin>` and reads
the MemoryBuffer, which is stored as `FileEntry::Content`.
Eventually the other buffers in `ContentCache` will sink to here as well
-- we probably usually want to load/save a MemoryBuffer eagerly -- but
it's happening early for stdin to get rid of
CompilerInstance::InitializeSourceManager's final call to
`SourceManager::overrideFileContents`.
clang/test/CXX/modules-ts/dcl.dcl/dcl.module/dcl.module.export/p1.cpp
relies on building a module from stdin; supporting that requires setting
ContentCache::BufferOverridden.
Differential Revision: https://reviews.llvm.org/D93148
Handle named pipes natively in SourceManager and FileManager, removing a
call to `SourceManager::overrideFileContents` in
`CompilerInstance::InitializeSourceManager` (removing a blocker for
sinking the content cache to FileManager (which will incidently sink
this new named pipe logic with it)).
SourceManager usually checks if the file entry's size matches the
eventually loaded buffer, but that's now skipped for named pipes since
the `stat` won't reflect the full size. Since we can't trust
`ContentsEntry->getSize()`, we also need shift the check for files that
are too large until after the buffer is loaded... and load the buffer
immediately in `createFileID` so that no client gets a bad value from
`ContentCache::getSize`. `FileManager::getBufferForFile` also needs to
treat these files as volatile when loading the buffer.
Native support in SourceManager / FileManager means that named pipes can
also be `#include`d, and clang/test/Misc/dev-fd-fs.c was expanded to
check for that.
This is a new version of 3b18a594c7, which
was reverted in b346322019 since it was
missing the `SourceManager` changes.
Differential Revision: https://reviews.llvm.org/D92531
This extends the command-line support for the 'armv8.7-a' architecture
name to the ARM target.
Based on a patch written by Momchil Velikov.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D93231
This introduces command-line support for the 'armv8.7-a' architecture name
(and an alias without the '-', as usual), and for the 'ls64' extension name.
Based on patches written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91776
This avoids having to repeat all the flags in the constructor's
initializer list in the same order. This style is already used by
several other targets.
_Nullable_result generally like _Nullable, except when being imported into a
swift async method. rdar://70106409
Differential revision: https://reviews.llvm.org/D92495
Emit error for use of 128-bit integer inside device code had been
already implemented in https://reviews.llvm.org/D74387. However,
the error is not emitted for SPIR64, because for SPIR64, hasInt128Type
return true.
hasInt128Type: is also used to control generation of certain 128-bit
predefined macros, initializer predefined 128-bit integer types and
build 128-bit ArithmeticTypes. Except predefined macros, only the
device target is considered, since error only emit when 128-bit
integer is used inside device code, the host target (auxtarget) also
needs to be considered.
The change address:
1. (SPIR.h) Correct hasInt128Type() for SPIR targets.
2. Sema.cpp and SemaOverload.cpp: Add additional check to consider host
target(auxtarget) when call to hasInt128Type. So that __int128_t
and __int128() are allowed to avoid error when they used outside
device code.
3. SemaType.cpp: add check for SYCLIsDevice to delay the error message.
The error will be emitted if the use of 128-bit integer in the device
code.
Reviewed By: Johannes Doerfert and Aaron Ballman
Differential Revision: https://reviews.llvm.org/D92439
As Power9 introduced hardware support for IEEE quad-precision FP type,
the feature should be enabled by default on Power9 or newer targets.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90213
This also teaches MachO writers/readers about the MachO cpu subtype,
beyond the minimal subtype reader support present at the moment.
This also defines a preprocessor macro to allow users to distinguish
__arm64__ from __arm64e__.
arm64e defaults to an "apple-a12" CPU, which supports v8.3a, allowing
pointer-authentication codegen.
It also currently defaults to ios14 and macos11.
Differential Revision: https://reviews.llvm.org/D87095
shouldRTTIBeUnique() returns false for iOS64CXXABI, which causes
RTTI objects to be emitted hidden. Update two tests that didn't
expect this to happen for the default triple.
Also rename iOS64CXXABI to AppleARM64CXXABI, since it's used for
arm64-apple-macos triples too.
Part of PR46644.
Differential Revision: https://reviews.llvm.org/D91904
This reverts commit 3b18a594c7, since
apparently this doesn't work everywhere. E.g.,
clang-x86_64-debian-fast/3889
(http://lab.llvm.org:8011/#/builders/109/builds/3889) gives me:
```
+ : 'RUN: at line 8'
+ /b/1/clang-x86_64-debian-fast/llvm.obj/bin/clang -x c /dev/fd/0 -E
+ cat /b/1/clang-x86_64-debian-fast/llvm.src/clang/test/Misc/dev-fd-fs.c
fatal error: file '/dev/fd/0' modified since it was first processed
1 error generated.
```
Remove compilicated logic from CompilerInstance::InitializeSourceManager
to deal with named pipes, updating FileManager::getBufferForFile to
handle it in a more straightforward way. The existing test at
clang/test/Misc/dev-fd-fs.c covers the new behaviour (just like it did
the old behaviour).
Differential Revision: https://reviews.llvm.org/D90733
Push `FileEntryRef` and `DirectoryEntryRef` further, using it them
`Module::Umbrella`, `Module::Header::Entry`, and
`Module::DirectoryName::Entry`.
- Add `DirectoryEntryRef::operator const DirectoryEntry *` and
`OptionalDirectoryEntryRefDegradesToDirectoryEntryPtr`, to get the
same "degrades to `DirectoryEntry*` behaviour `FileEntryRef` enjoys
(this avoids a bunch of churn in various clang tools).
- Fix the `DirectoryEntryRef` constructor from `MapEntry` to take it by
`const&`.
Note that we cannot get rid of the `...AsWritten` names leveraging the
new classes, since these need to be as written in the `ModuleMap` file
and the module directory path is preprended for the lookup in the
`FileManager`.
Differential Revision: https://reviews.llvm.org/D90497
Android has a handful of API levels relevant to developers described
here: https://developer.android.com/studio/build#module-level.
`__ANDROID_API__` is too vague and confuses a lot of people. Introduce
a new macro name that is explicit about which one it represents. Keep
the old name around because code has been using it for a decade.
Add `FileEntryRef::getDir`, which returns a `DirectoryEntryRef`. This
includes a few changes:
- Customize `OptionalStorage` so that `Optional<DirectoryEntryRef>` is
pointer-sized (like the change made to `Optional<FileEntryRef>`).
Factored out a common class, `FileMgr::MapEntryOptionalStorage`, to
reduce the code duplication.
- Store an `Optional<DirectoryEntryRef>` in `FileEntryRef::MapValue`.
This is set if and only if `MapValue` has a real `FileEntry`.
- Change `FileManager::getFileRef` and `getVirtualFileRef` to use
`getDirectoryRef` and store it in the `StringMap` for `FileEntryRef`.
Differential Revision: https://reviews.llvm.org/D90484
Change the `InputFile` class to store `Optional<FileEntryRef>` instead
of `FileEntry*`. This paged in a few API changes:
- Added `FileManager::getVirtualFileRef`, and converted `getVirtualFile`
to a wrapper of it.
- Updated `SourceManager::bypassFileContentsOverride` to take
`FileEntryRef` and return `Optional<FileEntryRef>`
(`ASTReader::getInputFile` is the only caller).
Differential Revision: https://reviews.llvm.org/D90053
This patch implements the definition of __ARM_FEATURE_ATOMICS and fixes the
missing definition of __ARM_FEATURE_CRC32 for Armv8.1-A.
Differential Revision: https://reviews.llvm.org/D91438
The macro is emitted when wargeting SVE code generation with the additional command line option `-msve-vector-bits=<N>`.
The behavior implied by the macro is described in sections "3.7.3.3. Behavior specific to SVE vectors" of the SVE ACLE (Version 00bet6) that can be found at https://developer.arm.com/documentation/100987/latest
Reviewed By: rengolin, rsandifo-arm
Differential Revision: https://reviews.llvm.org/D90956
Added support for the options mabi=vec-extabi and mabi=vec-default which are analogous to qvecnvol and qnovecnvol when using XL on AIX.
The extended Altivec ABI on AIX is enabled using mabi=vec-extabi in clang and vec-extabi in llc.
Reviewed By: Xiangling_L, DiggerLin
Differential Revision: https://reviews.llvm.org/D89684
The RISCV target did not set the GCC atomic compare and swap defines,
unlike other targets. This broke builds for things like glib on RISCV.
Patch by Kristof Provost (kprovost)
Differential Revision: https://reviews.llvm.org/D91784
This will ensure that passes that add new global variables will create them
in address space 1 once the passes have been updated to no longer default
to the implicit address space zero.
This also changes AutoUpgrade.cpp to add -G1 to the DataLayout if it wasn't
already to present to ensure bitcode backwards compatibility.
Reviewed by: arsenm
Differential Revision: https://reviews.llvm.org/D84345
Add an option -munsafe-fp-atomics for AMDGPU target.
When enabled, clang adds function attribute "amdgpu-unsafe-fp-atomics"
to any functions for amdgpu target. This allows amdgpu backend to use
unsafe fp atomic instructions in these functions.
Differential Revision: https://reviews.llvm.org/D91546
We want to allow using MMA on P10 CPU only. This patch prevents the use of MMA
with the -mmma option on P9 CPUs and earlier.
Differential Revision: https://reviews.llvm.org/D91200
We have option -mabi=ieeelongdouble to set current long double to
IEEEquad semantics. Like what GCC does, we need to define
__LONG_DOUBLE_IEEE128__ macro in this case, and __LONG_DOUBLE_IBM128__
if using PPCDoubleDouble.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90208
Support a vector register constraint in inline asm of clang.
Add a regression test also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D91251
Change `Module::Umbrella` from a `const void *` to a `PointerUnion` of
`FileEntry` and `DirectoryEntry`. We can drop the `HasUmbrellaDir` bit
(since `PointerUnion` includes that).
This change makes it safer to update to `FileEntryRef` and
`DirectoryEntryRef` in a future patch.
Differential Revision: https://reviews.llvm.org/D90481
This differentiates the Ryzen 4000/4300/4500/4700 series APUs that were
previously included in gfx909.
Differential Revision: https://reviews.llvm.org/D90419
Change-Id: Ia901a7157eb2f73ccd9f25dbacec38427312377d
Change `Module::ASTFile` and `ModuleFile::File` to use
`Optional<FileEntryRef>` instead of `const FileEntry *`. One of many
steps toward removing `FileEntry::getName`.
Differential Revision: https://reviews.llvm.org/D89836
It's only used by Version.cpp, so limit the definition to just that one
file instead of making all of Clang recompile if you change CLANG_VENDOR.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D90516
This patch mainly made the following changes:
1. Support AVX-VNNI instructions;
2. Introduce ExplicitVEXPrefix flag so that vpdpbusd/vpdpbusds/vpdpbusds/vpdpbusds instructions only use vex-encoding when user explicity add {vex} prefix.
Differential Revision: https://reviews.llvm.org/D89105
This preprocessor define was meant to be used to conditionally include VCSVersion.inc. However, the define was always set, and it was the content of the header that was conditionally generated. Therefore HAVE_VCS_VERSION_INC should be cleaned up.
Reviewed By: gribozavr2, MaskRay
Differential Revision: https://reviews.llvm.org/D84623
Split `FileEntry` and `FileEntryRef` out into a new file
`clang/Basic/FileEntry.h`. This allows current users of a
forward-declared `FileEntry` to transition to `FileEntryRef` without
adding more includers of `FileManager.h`.
Also split `UniqueID` out to llvm/Support/FileSystem/UniqueID.h, so
`FileEntry.h` doesn't need to include all of `FileSystem.h` for just
that type.
Differential Revision: https://reviews.llvm.org/D89761
Shrink `FileEntryRef` to the size of a pointer, by having it directly
reference the `StringMapEntry` the same way that `DirectoryEntryRef`
does. This makes `FileEntryRef::FileEntryRef` private as a side effect
(`FileManager` is a friend!).
There are two helper types added within `FileEntryRef`:
- `FileEntryRef::MapValue` is the type stored in
`FileManager::SeenFileEntries`. It's a replacement for
`SeenFileEntryOrRedirect`, where the second pointer type has been
changed from `StringRef*` to `MapEntry*` (see next bullet).
- `FileEntryRef::MapEntry` is the instantiation of `StringMapEntry<>`
where `MapValue` is stored. This is what `FileEntryRef` has a pointer
to, in order to grab the name in addition to the value.
Differential Revision: https://reviews.llvm.org/D89488
This patch removes the necessity to access the SourceLocation internal
representation in several places that use FoldingSet objects.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D69844
Instead of putting a fake `SLocEntry` at `LoadedSLocEntryTable[Index]`
when it fails to load in `SourceManager::loadSLocEntry`, allocate a fake
one. Unless someone is sniffing the address of the returned `SLocEntry`
(doubtful), this won't be a functionality change. Note that
`SLocEntryLoaded[Index]` wasn't being set to `true` either before or
after this change so no accessor is every going to look at
`LoadedSLocEntryTable[Index]`.
As a side effect, drop the `mutable` from `LoadedSLocEntryTable`.
Differential Revision: https://reviews.llvm.org/D89748
4dc5573acc added `FileEntryRef` in order to
help enable sharing of a `FileManager` between `CompilerInstance`s.
It also added a `StringRef` with the filename on `FileInfo`. This
doubled `sizeof(FileInfo)`, bloating `sizeof(SLocEntry)`, of which we
have one for each (loaded and unloaded) file and macro expansion. This
causes a memory regression in modules builds.
Move the filename down into the `ContentCache`, which is a side data
structure for `FileInfo` that does not impact `sizeof(SLocEntry)`. Once
`FileEntryRef` is used for `ContentCache::OrigEntry` this can go away.
Differential Revision: https://reviews.llvm.org/D89580
Radar-Id: rdar://59908826
Update a few APIs to return non-const references instead of pointers,
and remove associated `const_cast`s and non-null assertions.
Differential Revision: https://reviews.llvm.org/D90067
Use `LineOffsetMapping:get` directly and remove/inline the helper
`ComputeLineNumbers`, simplifying the callers.
Differential Revision: https://reviews.llvm.org/D89922
On AIX, to support vector types, which should always be 16 bytes aligned,
we set alloca to return 16 bytes aligned memory space.
Differential Revision: https://reviews.llvm.org/D89910
Avoid some noisy `const_cast`s by making `ContentCache::SourceLineCache`
and `SourceManager::LastLineNoContentCache` both mutable.
Differential Revision: https://reviews.llvm.org/D89914
Put the guts of `ComputeLineNumbers` into `LineOffsetMapping::get` and
`LineOffsetMapping::LineOffsetMapping`. As a drive-by, store the number
of lines directly in the bump-ptr-allocated array.
Differential Revision: https://reviews.llvm.org/D89913
It turns out that `FileInfo` *always* has a ContentCache. Clarify that
in the code:
- Update the private version of `SourceManager::createFileID` to take a
`ContentCache&` instead of `ContentCache*`, and rename it to
`createFileIDImpl` for clarity.
- Change `FileInfo::getContentCache` to return a reference.
Differential Revision: https://reviews.llvm.org/D89554
`SourceManager::getFileEntryRefForID`'s remaining callers just want the
filename component, which is coming from the `FileInfo`. Replace the API
with `getNonBuiltinFilenameForID`, which also removes another use of
`FileEntryRef::FileEntryRef` outside of `FileManager`.
Both callers are collecting file dependencies, and one of them relied on
this API to filter out built-ins (as exposed by
clang/test/ClangScanDeps/modules-full.cpp). It seems nice to continue
providing that service.
Differential Revision: https://reviews.llvm.org/D89508
`SourceManager::isMainFile` does not use the filename, so it doesn't
need the full `FileEntryRef`; in fact, it's misleading to take the name
because that makes it look relevant. Simplify the API, and in the
process remove some calls to `FileEntryRef::FileEntryRef` in the unit
tests (which were blocking making that private to `SourceManager`).
Differential Revision: https://reviews.llvm.org/D89507
Add helpers `getSLocEntryOrNull`, which handles the `Invalid` logic
around `getSLocEntry`, and `getSLocEntryForFile`, which also checks for
`SLocEntry::isFile`, and use them to reduce repeated code.
Differential Revision: https://reviews.llvm.org/D89503
Replace `ContentCache::getRawBuffer` with `getBufferDataIfLoaded` and
`getBufferIfLoaded`, excising another accessor for the underlying
`MemoryBuffer*` in favour of `StringRef` and `MemoryBufferRef`.
Differential Revision: https://reviews.llvm.org/D89445
Many non-language extensions are defined but also unused. This patch
removes them with their tests as they do not require compiler support.
The cl_khr_select_fprounding_mode extension is also removed because it
has been deprecated since OpenCL 1.1 and Clang doesn't have any specific
support for it.
The cl_khr_context_abort extension is only referred to in "The OpenCL
Specification", version 1.2 and 2.0, in Table 4.3, but no specification
is provided in "The OpenCL Extension Specification" for these versions.
Because it is both unused in Clang and lacks specification, this
extension is removed.
The following extensions are platform extensions that bring new OpenCL
APIs but do not impact the kernel language nor require compiler support.
They are therefore removed.
- cl_khr_gl_sharing, introduced in OpenCL 1.0
- cl_khr_icd, introduced in OpenCL 1.2
- cl_khr_gl_event, introduced in OpenCL 1.1
Note: this extension adds a new API to create cl_event but it also
specifies that these can only be used by clEnqueueAcquireGLObjects.
Hence, they cannot be used on the device side and the extension does
not impact the kernel language.
- cl_khr_d3d10_sharing, introduced in OpenCL 1.1
- cl_khr_d3d11_sharing, introduced in OpenCL 1.2
- cl_khr_dx9_media_sharing, introduced in OpenCL 1.2
- cl_khr_image2d_from_buffer, introduced in OpenCL 1.2
- cl_khr_initialize_memory, introduced in OpenCL 1.2
- cl_khr_gl_depth_images, introduced in OpenCL 1.2
Note: this extension is related to cl_khr_depth_images but only the
latter adds new features to the kernel language.
- cl_khr_spir, introduced in OpenCL 1.2
- cl_khr_egl_event, introduced in OpenCL 1.2
Note: this extension adds a new API to create cl_event but it also
specifies that these can only be used by clEnqueueAcquire* API
functions. Hence, they cannot be used on the device side and the
extension does not impact the kernel language.
- cl_khr_egl_image, introduced in OpenCL 1.2
- cl_khr_terminate_context, introduced in OpenCL 1.2
The minimum required OpenCL version used in OpenCLExtensions.def for
these extensions is not always correct. Removing these address that
issue.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D89372
This changes `ContentCache::Buffer` to use
`std::unique_ptr<MemoryBuffer>` instead of the `PointerIntPair`. It
drops the (mostly unused) `DoNotFree` bit, instead creating a (new)
non-owning `MemoryBuffer` instance when passed a `MemoryBufferRef`.
Differential Revision: https://reviews.llvm.org/D67030
Move a flag out of the `MemoryBuffer*` to unblock changing it to a
`unique_ptr`. There are plenty of bits available in the bitfield below.
Differential Revision: https://reviews.llvm.org/D89431
Inline `Source::getBufferPointer` into its only remaining caller,
`getBufferOrNone`. No functionality change.
Differential Revision: https://reviews.llvm.org/D89430
Replace `SourceManager::getMemoryBufferForFile`, which returned a
dereferenceable `MemoryBuffer*` and had a `bool*Invalid` out parameter,
with `getMemoryBufferForFileOrNone` (returning
`Optional<MemoryBufferRef>`) and `getMemoryBufferForFileOrFake`
(returning `MemoryBufferRef`).
Differential Revision: https://reviews.llvm.org/D89429
In order to drop the final callers to `SourceManager::getBuffer`, change
`FrontendInputFile` to use `Optional<MemoryBufferRef>`. Also updated
the "unowned" version of `SourceManager::createFileID` to take a
`MemoryBufferRef` (it now calls `MemoryBuffer::getMemBuffer`, which
creates a `MemoryBuffer` that does not own the buffer data).
Differential Revision: https://reviews.llvm.org/D89427
This change creates a `DenseMapInfo` trait specialization for the
SourceLocation class. The empty key, the tombstone key, and the hash
function are identical to `DenseMapInfo<unsigned>`, because we already
have hash maps that use raw the representation of `SourceLocation` as
a key.
The update of existing `DenseMap`s containing raw representation of
`SourceLocation`s will be done in a follow-up patch. As an example
the patch makes use of the new trait in one instance:
clang-tidy/google/UpgradeGoogletestCaseCheck.{h,cpp}
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D89719
PartialDiagnostic misses some functions compared to DiagnosticBuilder.
This patch refactors DiagnosticBuilder and PartialDiagnostic, extracts
the common functionality so that the streaming << operators are
shared.
Differential Revision: https://reviews.llvm.org/D84362
- The goal of this patch is improve option compatible with RISCV-V GCC,
-mcpu support on GCC side will sent patch in next few days.
- -mtune only affect the pipeline model and non-arch/extension related
target feature, e.g. instruction fusion; in td file it called
TuneFeatures, which is introduced by X86 back-end[1].
- -mtune accept all valid option for -mcpu and extra alias processor
option, e.g. `generic`, `rocket` and `sifive-7-series`, the purpose is
option compatible with RISCV-V GCC.
- Processor alias for -mtune will resolve according the current target arch,
rv32 or rv64, e.g. `rocket` will resolve to `rocket-rv32` or `rocket-rv64`.
- Interaction between -mcpu and -mtune:
* -mtune has higher priority than -mcpu for pipeline model and
TuneFeatures.
[1] https://reviews.llvm.org/D85165
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D89025
Update clang/lib/Basic to stop relying on a `MemoryBuffer*`, using the
`MemoryBufferRef` from `getBufferOrNone` or `getBufferOrFake` instead of
`getBuffer`.
Differential Revision: https://reviews.llvm.org/D89394
Remove `ContentCache::getBuffer`, which always returned a
dereferenceable `MemoryBuffer*` and had a `bool*Invalid` out parameter,
and replace it with:
- `ContentCache::getBufferOrNone`, which returns
`Optional<MemoryBufferRef>`. This is the new API that consumers should
use. Later it could be renamed to `getBuffer`, but intentionally using
a different name to root out any unexpected callers.
- `ContentCache::getBufferPointer`, which returns `MemoryBuffer*` with
"optional" semantics. This is `private` to avoid growing callers and
`SourceManager` has temporarily been made a `friend` to access it.
Later paches will update the transitive callers to not need a raw
pointer, and eventually this will be deleted.
No functionality change intended here.
Differential Revision: https://reviews.llvm.org/D89348
GCC 11 will define this macro.
In LLVM, the feature flag only applies to 64-bit mode and we always define the
macro in 32-bit mode. This is different from GCC -m32 in which -mno-sahf can
suppress the macro. The discrepancy can unlikely cause trouble.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D89198
At AMD, in an internal audit of our code, we found some corner cases
where we were not quite differentiating targets enough for some old
hardware. This commit is part of fixing that by adding three new
targets:
* The "Oland" and "Hainan" variants of gfx601 are now split out into
gfx602. LLPC (in the GPUOpen driver) and other front-ends could use
that to avoid using the shaderZExport workaround on gfx602.
* One variant of gfx703 is now split out into gfx705. LLPC and other
front-ends could use that to avoid using the
shaderSpiCsRegAllocFragmentation workaround on gfx705.
* The "TongaPro" variant of gfx802 is now split out into gfx805.
TongaPro has a faster 64-bit shift than its former friends in gfx802,
and a subtarget feature could be set up for that to take advantage of
it. This commit does not make that change; it just adds the target.
V2: Add clang changes. Put TargetParser list in order.
V3: AMDGCNGPUs table in TargetParser.cpp needs to be in GPUKind order,
so fix the GPUKind order.
Differential Revision: https://reviews.llvm.org/D88916
Change-Id: Ia901a7157eb2f73ccd9f25dbacec38427312377d
Set the default alignment control variables for z/OS target and add test case for alignment rules on z/OS.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D88845
Currently CUDA/HIP toolchain uses "unknown" as bound arch
for offload action for fat binary. This causes -mcpu or -march
with "unknown" added in HIPToolChain::TranslateArgs or
CUDAToolChain::TranslateArgs.
This causes issue for https://reviews.llvm.org/D88377 since
HIP toolchain needs to check -mcpu in HIPToolChain::TranslateArgs.
The bound arch of offload action for fat binary is not really
used, therefore set it to CudaArch::UNUSED.
Differential Revision: https://reviews.llvm.org/D88524
This adds support for -mcpu=cortex-r82. Some more information about this
core can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-r/cortex-r82
One note about the system register: that is a bit of a refactoring because of
small differences between v8.4-A AArch64 and v8-R AArch64.
This is based on patches from Mark Murray and Mikhail Maltsev.
Differential Revision: https://reviews.llvm.org/D88660
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
This patch legalizes the v256i1 and v512i1 types that will be used for MMA.
It implements loads and stores of these types.
v256i1 is a pair of VSX registers, so for this type, we load/store the two
underlying registers. v512i1 is used for MMA accumulators. So in addition to
loading and storing the 4 associated VSX registers, we generate instructions to
prime (copy the VSX registers to the accumulator) after loading and unprime
(copy the accumulator back to the VSX registers) before storing.
This patch also adds the UACC register class that is necessary to implement the
loads and stores. This class represents accumulator in their unprimed form and
allow the distinction between primed and unprimed accumulators to avoid invalid
copies of the VSX registers associated with primed accumulators.
Differential Revision: https://reviews.llvm.org/D84968
This reverts commit 8e780a1653.
DiagnosticBuilder is a value type, created on the stack everywhere. IMO
we should not be adding a vtable to it, and making very operator<< use a
virtual interface. There are other feasible designs for implementing
this. The original review, D84362, was approved by @tra, who is
responsible for Clang's CUDA support, but it wasn't reviewed by @rsmith
or anyone responsible for clang's diagnostic library.
Using a pointer for the description string in StaticDiagInfoRec causes
several problems:
1. We don't need to use a whole pointer to represent the string;
2. The use of pointers incurs runtime relocations for those pointers;
the relocations take up space on disk and represent runtime overhead;
3. The need to relocate data implies that, on some platforms, the entire
array containing StaticDiagInfoRecs cannot be shared between processes.
This patch changes the storage scheme for the diagnostic descriptions to
avoid these problems. We instead generate (effectively) one large
string and then StaticDiagInfoRec conceptually holds offsets into the
string. We elected to also move the storage of those offsets into a
separate array to further reduce the space required.
On x86-64 Linux, this change removes about 120KB of relocations and
moves about 60KB from the non-shareable .data.rel.ro section to
shareable .rodata. (The array is about 80KB before this, but we
eliminated 4 bytes/entry by using offsets rather than pointers.) We
actually reap this benefit twice, because these tables show up in both
libclang.so and libclang-cpp.so and we get the reduction in both places.
Differential Revision: https://reviews.llvm.org/D81865
This recommits 829d14ee0a.
The patch was reverted due to a regression in some CUDA app
which was thought to be caused by this patch. However, investigation
showed that the regression was due to some other issues, therefore
recommit this patch.
Set the default wchar_t type on z/OS, and unsigned as the default.
Reviewed By: hubert.reinterpretcast, fanbo-meng
Differential Revision: https://reviews.llvm.org/D87624
In CUDA/HIP a function may become implicit host device function by
pragma or constexpr. A host device function is checked in both
host and device compilation. However it may be emitted only
on host or device side, therefore the diagnostics should be
deferred until it is known to be emitted.
Currently clang is only able to defer certain diagnostics. This causes
false alarms and limits the usefulness of host device functions.
This patch lets clang defer all overloading resolution diagnostics for host device functions.
An option -fgpu-defer-diag is added to control this behavior. By default
it is off.
It is NFC for other languages.
Differential Revision: https://reviews.llvm.org/D84364
PartialDiagnostic misses some functions compared to DiagnosticBuilder.
This patch refactors DiagnosticBuilder and PartialDiagnostic, extracts
the common functionality so that the streaming << operators are
shared.
Differential Revision: https://reviews.llvm.org/D84362
Aligned allocation is not supported on z/OS. This patch sets -faligned-alloc-unavailable as default in z/OS toolchain.
Reviewed By: abhina.sreeskantharajan, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87611
d4ce862f introduced HasStrictFP to disable generating constrained FP
operations for platforms lacking support. Since work for enabling
constrained FP on PowerPC is almost done, we'd like to enable it.
Reviewed By: kpn, steven.zhang
Differential Revision: https://reviews.llvm.org/D87223
As reported in Bug 42535, `clang` doesn't inline atomic ops on 32-bit
Sparc, unlike `gcc` on Solaris. In a 1-stage build with `gcc`, only two
testcases are affected (currently `XFAIL`ed), while in a 2-stage build more
than 100 tests `FAIL` due to this issue.
The reason for this `gcc`/`clang` difference is that `gcc` on 32-bit
Solaris/SPARC defaults to `-mpcu=v9` where atomic ops are supported, unlike
with `clang`'s default of `-mcpu=v8`. This patch changes `clang` to use
`-mcpu=v9` on 32-bit Solaris/SPARC, too.
Doing so uncovered two bugs:
`clang -m32 -mcpu=v9` chokes with any Solaris system headers included:
/usr/include/sys/isa_defs.h:461:2: error: "Both _ILP32 and _LP64 are defined"
#error "Both _ILP32 and _LP64 are defined"
While `clang` currently defines `__sparcv9` in a 32-bit `-mcpu=v9`
compilation, neither `gcc` nor Studio `cc` do. In fact, the Studio 12.6
`cc(1)` man page clearly states:
These predefinitions are valid in all modes:
[...]
__sparcv8 (SPARC)
__sparcv9 (SPARC -m64)
At the same time, the patch defines `__GCC_HAVE_SYNC_COMPARE_AND_SWAP_[1248]`
for a 32-bit Sparc compilation with any V9 cpu. I've also changed
`MaxAtomicInlineWidth` for V9, matching what `gcc` does and the Oracle
Developer Studio 12.6: C User's Guide documents (Ch. 3, Support for Atomic
Types, 3.1 Size and Alignment of Atomic C Types).
The two testcases that had been `XFAIL`ed for Bug 42535 are un-`XFAIL`ed
again.
Tested on `sparcv9-sun-solaris2.11` and `amd64-pc-solaris2.11`.
Differential Revision: https://reviews.llvm.org/D86621
The __ARM_FEATURE_SVE_BITS feature macro is specified in the Arm C
Language Extensions (ACLE) for SVE [1] (version 00bet5). From the spec,
where __ARM_FEATURE_SVE_BITS==N:
When N is nonzero, indicates that the implementation is generating
code for an N-bit SVE target and that the arm_sve_vector_bits(N)
attribute is available.
This was defined in D83550 as __ARM_FEATURE_SVE_BITS_EXPERIMENTAL and
enabled under the -msve-vector-bits flag to simplify initial tests.
This patch drops _EXPERIMENTAL now there is support for the feature.
[1] https://developer.arm.com/documentation/100987/latest
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D86720
Once the new option parsing system is committed, this will allow to generate a
check to ensure that correct command line generation happens
Differential Revision: https://reviews.llvm.org/D86290
As a prerequisite to doing experimental buids of pieces of FreeBSD PowerPC64 as little-endian, allow actually targeting it.
This is needed so basic platform definitions are pulled in. Without it, the compiler will only run freestanding.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73425
This patch defaults to -mtune=generic unless -march is present. If -march is present we'll use the empty string unless its overridden by mtune. The back should use the target cpu if the tune-cpu isn't present.
It also adds AST serialization support to fix some tests that emit AST and parse it back. These tests diff the IR against the output from not going through AST. So if we don't serialize the tune CPU we fail the diff.
Differential Revision: https://reviews.llvm.org/D86488
This patch adds the z/OS target and defines macros as a stepping stone
towards enabling a native build on z/OS.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D85324
Support -march=sapphirerapids for x86.
Compare with Icelake Server, it includes 14 more new features. They are
amxtile, amxint8, amxbf16, avx512bf16, avx512vp2intersect, cldemote,
enqcmd, movdir64b, movdiri, ptwrite, serialize, shstk, tsxldtrk, waitpkg.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86503
This patch adds frontend and backend options to enable and disable
the PowerPC MMA operations added in ISA 3.1. Instructions using these
options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D81442
gcc errors on this, but I'm nervous that since -mtune has been
ignored by clang for so long that there may be code bases out
there that pass 32-bit cpus to clang.
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
This adds parsing and codegen support for tune in target attribute.
I've implemented this so that arch in the target attribute implicitly disables tune from the command line. I'm not sure what gcc does here. But since -march implies -mtune. I assume 'arch' in the target attribute implies tune in the target attribute.
Differential Revision: https://reviews.llvm.org/D86187
Building on the backend support from D85165. This parses the command line option in the driver, passes it on to CC1 and adds a function attribute.
-Still need to support tune on the target attribute.
-Need to use "generic" as the tuning by default. But need to change generic in the backend first.
-Need to set tune if march is specified and mtune isn't.
-May need to disable getHostCPUName's ability to guess CPU name from features when it doesn't have a family/model match for mtune=native. That's what gcc appears to do.
Differential Revision: https://reviews.llvm.org/D85384
We can use this to remove some calls to initFeatureMap from Sema
and CodeGen when a function doesn't have a target attribute.
This reduces compile time of the linux kernel where this map
is needed to diagnose some inline assembly constraints based
on whether sse, avx, or avx512 is enabled.
Differential Revision: https://reviews.llvm.org/D85807
Properly set "simd128" in the feature map when "unimplemented-simd128"
is requested.
initFeatureMap is used to create the feature vector used by
handleTargetFeatures. There are later calls to initFeatureMap in
CodeGen that were using these flags to recreate the map. But the
original feature vector should be passed to those calls. So that
should be enough to rebuild the map.
The only issue seemed to be that simd128 was not enabled in the
map by the first call to initFeatureMap. Using the SIMDLevel set
by handleTargetFeatures in the later calls allowed simd128 to be
set in the later versions of the map.
To fix this I've added an override of setFeatureEnabled that
will update the map the first time with the correct simd dependency.
Differential Revision: https://reviews.llvm.org/D85806
COFF targets have a max object alignment of 8192, so trying to create
one with a larger size results in an unreachable in WinCOFFObjectWriter.
For the reproducer I have uses thread local storage, however other
alignments are likely affected as well.
This patch sets the MaxVectorAlign for COFF to 8192. Additionally,
though there is no longer a way to reproduce that I could find, it
correctly sets the MaxTLSAlign for COFF to that value as well, so that
if anyone comes up with a situation where this is true, it will cause an
error.
Differential Revision: https://reviews.llvm.org/D85543
If the CPU string is empty, the target feature map may end up having
an empty string inserted to it. The symptom of the problem is a warning
message:
'+' is not a recognized feature for this target (ignoring feature)
Also, the target-features attribute in the module will have an empty
string in it.
Adds frontend and backend options to enable and disable the
PowerPC paired vector memory operations added in ISA 3.1.
Instructions using these options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D83722
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This patch introduces 2 new address spaces in OpenCL: global_device and global_host
which are a subset of a global address space, so the address space scheme will be
looking like:
```
generic->global->host
->device
->private
->local
constant
```
Justification: USM allocations may be associated with both host and device memory. We
want to give users a way to tell the compiler the allocation type of a USM pointer for
optimization purposes. (Link to the Unified Shared Memory extension:
https://github.com/intel/llvm/blob/sycl/sycl/doc/extensions/USM/cl_intel_unified_shared_memory.asciidoc)
Before this patch USM pointer could be only in opencl_global
address space, hence a device backend can't tell if a particular pointer
points to host or device memory. On FPGAs at least we can generate more
efficient hardware code if the user tells us where the pointer can point -
being able to distinguish between these types of pointers at compile time
allows us to instantiate simpler load-store units to perform memory
transactions.
Patch by Dmitry Sidorov.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D82174
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
`to` and `from` clauses take the same modifiers, which are called
"motion modifiers" in TR8, so implement handling of their modifiers
once not twice. This will make it easier to implement additional
motion modifiers in the future.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84710
Implement AIX default `power` alignment rule by adding `PreferredAlignment` and
`PreferredNVAlignment` in ASTRecordLayout class.
The patchh aims at returning correct value for `__alignof(x)` and `alignof(x)`
under `power` alignment rules.
Differential Revision: https://reviews.llvm.org/D79719
Implement __builtin_eh_return_data_regno for SystemZ.
Match behavior of GCC.
Author: slavek-kucera
Differential Revision: https://reviews.llvm.org/D84341
This patch implements Clang front end support for the OpenMP TR8
`present` map type modifier. The next patch in this series implements
OpenMP runtime support.
This patch does not attempt to implement TR8 sec. 2.22.7.1 "map
Clause", p. 319, L14-16:
> If a map clause with a present map-type-modifier is present in a map
> clause, then the effect of the clause is ordered before all other
> map clauses that do not have the present modifier.
Compare to L10-11, which Clang does not appear to implement yet:
> For a given construct, the effect of a map clause with the to, from,
> or tofrom map-type is ordered before the effect of a map clause with
> the alloc, release, or delete map-type.
This patch also does not implement the `present` implicit-behavior for
`defaultmap` or the `present` motion-modifier for `target update`.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D83061
Use 'o' for the mangling specification instead of 'e'. This fixes an
error in the backend caused by a mismatch between the data layouts
generated by the backend and the frontend.
rdar://problem/64168540
Summary:
This patch implements parsing support for the 'arm_sve_vector_bits' type
attribute, defined by the Arm C Language Extensions (ACLE, version 00bet5,
section 3.7.3) for SVE [1].
The purpose of this attribute is to define fixed-length (VLST) versions
of existing sizeless types (VLAT). For example:
#if __ARM_FEATURE_SVE_BITS==512
typedef svint32_t fixed_svint32_t __attribute__((arm_sve_vector_bits(512)));
#endif
Creates a type 'fixed_svint32_t' that is a fixed-length version of
'svint32_t' that is normal-sized (rather than sizeless) and contains
exactly 512 bits. Unlike 'svint32_t', this type can be used in places
such as structs and arrays where sizeless types can't.
Implemented in this patch is the following:
* Defined and tested attribute taking single argument.
* Checks the argument is an integer constant expression.
* Attribute can only be attached to a single SVE vector or predicate
type, excluding tuple types such as svint32x4_t.
* Added the `-msve-vector-bits=<bits>` flag. When specified the
`__ARM_FEATURE_SVE_BITS__EXPERIMENTAL` macro is defined.
* Added a language option to store the vector size specified by the
`-msve-vector-bits=<bits>` flag. This is used to validate `N ==
__ARM_FEATURE_SVE_BITS`, where N is the number of bits passed to the
attribute and `__ARM_FEATURE_SVE_BITS` is the feature macro defined under
the same flag.
The `__ARM_FEATURE_SVE_BITS` macro will be made non-experimental in the final
patch of the series.
[1] https://developer.arm.com/documentation/100987/latest
This is patch 1/4 of a patch series.
Reviewers: sdesmalen, rsandifo-arm, efriedma, ctetreau, cameron.mcinally, rengolin, aaron.ballman
Reviewed By: sdesmalen, aaron.ballman
Differential Revision: https://reviews.llvm.org/D83550
Summary:
1. gcc uses `-march` and `-mtune` flag to chose arch and
pipeline model, but clang does not have `-mtune` flag,
we uses `-mcpu` to chose both infos.
2. Add SiFive e31 and u54 cpu which have default march
and pipeline model.
3. Specific `-mcpu` with rocket-rv[32|64] would select
pipeline model only, and use the driver's arch choosing
logic to get default arch.
Reviewers: lenary, asb, evandro, HsiangKai
Reviewed By: lenary, asb, evandro
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D71124
This patch adds override to several overriding virtual functions that were missing the keyword within the clang/ directory. These were found by the new -Wsuggest-override.
Remove _COMPAT. Drop the ARCHNAME. Remove the non-COMPAT versions
that are no longer needed.
We now only use these macros in places where we need compatibility
with libgcc/compiler-rt. So we don't need to call out _COMPAT
specifically.
We currently have strict floating point/constrained floating point enabled
for all targets. Constrained SDAG nodes get converted to the regular ones
before reaching the target layer. In theory this should be fine.
However, the changes are exposed to users through multiple clang options
already in use in the field, and the changes are _completely_ _untested_
on almost all of our targets. Bugs have already been found, like
"https://bugs.llvm.org/show_bug.cgi?id=45274".
This patch disables constrained floating point options in clang everywhere
except X86 and SystemZ. A warning will be printed when this happens.
Use the new -fexperimental-strict-floating-point flag to force allowing
strict floating point on hosts that aren't already marked as supporting
it (X86 and SystemZ).
Differential Revision: https://reviews.llvm.org/D80952
setFeatureEnabled is a virtual function. setFeatureEnabledImpl
was its implementation. This split was to avoid virtual calls
when we need to call setFeatureEnabled in initFeatureMap.
With C++11 we can use 'final' on setFeatureEnabled to enable
the compiler to perform de-virtualization for the initFeatureMap
calls.
Previously we had to specify the forward and backwards feature dependencies separately which was error prone. And as dependencies have gotten more complex it was hard to be sure the transitive dependencies were handled correctly. The way it was written was also not super readable.
This patch replaces everything with a table that lists what features a feature is dependent on directly. Then we can recursively walk through the table to find the transitive dependencies. This is largely based on how we handle subtarget features in the MC layer from the tablegen descriptions.
Differential Revision: https://reviews.llvm.org/D83273
Instead of detecting the string in 2 places. Just swap the string
to 'sse4.1' or 'sse4.2' at the top of the function.
Prep work for a patch to switch the rest of this function to a
table based system. And I don't want to include 'sse4a' in the
table.
We currently have strict floating point/constrained floating point enabled
for all targets. Constrained SDAG nodes get converted to the regular ones
before reaching the target layer. In theory this should be fine.
However, the changes are exposed to users through multiple clang options
already in use in the field, and the changes are _completely_ _untested_
on almost all of our targets. Bugs have already been found, like
"https://bugs.llvm.org/show_bug.cgi?id=45274".
This patch disables constrained floating point options in clang everywhere
except X86 and SystemZ. A warning will be printed when this happens.
Differential Revision: https://reviews.llvm.org/D80952
Summary:
Change stack alignment from 64 bits to 128 bits to follow ABI correctly.
And add a regression test for datalayout.
Reviewers: simoll, k-ishizaka
Reviewed By: simoll
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #llvm, #ve, #clang
Differential Revision: https://reviews.llvm.org/D83173
Summary:
D80831 changed part of the prefix usage for AIX.
But there are other places getting prefix from DataLayout.
This patch intends to make prefix usage consistent on AIX.
Reviewed by: hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D81270
Summary:
This patch is removing the custom enumeration for OpenMP Directives and Clauses and replace them
with the newly tablegen generated one from llvm/Frontend. This is a first patch and some will follow to share the same
infrastructure where possible. The next patch should use the clauses allowance defined in the tablegen file.
Reviewers: jdoerfert, DavidTruby, sscalpone, kiranchandramohan, ichoyjx
Reviewed By: DavidTruby, ichoyjx
Subscribers: jholewinski, cfe-commits, dblaikie, MaskRay, ymandel, ichoyjx, mgorny, yaxunl, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm, #flang, #clang
Differential Revision: https://reviews.llvm.org/D82906
This replaces the switch statement implementation in the clang's
X86.cpp with a lookup table in X86TargetParser.cpp.
I've used constexpr and copy of the FeatureBitset from
SubtargetFeature.h to store the features in a lookup table.
After the lookup the bitset is translated into strings for use
by the rest of the frontend code.
I had to modify the implementation of the FeatureBitset to avoid
bugs in gcc 5.5 constexpr handling. It seems to not like the
same array entry to be used on the left side and right hand side
of an assignment or &= or |=. I've also used uint32_t instead of
uint64_t and sized based on the X86::CPU_FEATURE_MAX.
I've initialized the features for different CPUs outside of the
table so that we can express inheritance in an adhoc way. This
was one of the big limitations of the switch and we had resorted
to labels and gotos.
Differential Revision: https://reviews.llvm.org/D82731
Summary:
The following feature macros have been added:
__ARM_FEATURE_SVE_BF16
__ARM_FEATURE_SVE_MATMUL_INT8
__ARM_FEATURE_SVE_MATMUL_FP32
__ARM_FEATURE_SVE_MATMUL_FP64
The driver has been updated to enable them accordingly to the value of
the target feature passed at command line.
The SVE ACLE tests using the macros have been modified to work with
the target feature instead of passing the macro at command line.
Reviewers: sdesmalen, efriedma, c-rhodes, kmclaughlin, SjoerdMeijer, rengolin
Subscribers: tschuett, kristof.beyls, rkruppe, psnobl, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82623
Previously we inferred it if sse4.2 ended up being enabled after
all feature processing. But writing -march=nehalem -mno-sse4.2
should have popcnt enabled.
This reverts commit defd43a5b3.
with correction to solve msan report
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
CPUs with avx always have xsave, but some CPUs without avx also
have xsave. So we shouldn't disable xsave just because avx is
disabled. This would prevent xsave from being enabled with
-march=native on CPUs with xsave and not avx.
But we also don't want -mavx -mno-avx to leave xsave eanabled.
So only enable xsave if avx is enabled after processing all features.
I thought about just not turning xsave on with avx at all, but
there might be someone out there depending on it.
A seemingly innocuous Linux kernel change [0] seemingly blew up our
compile times by over 3x, as reported by @nathanchance in [1].
The code in question uses a doubly nested macro containing GNU C
statement expressions that are then passed to typeof(), which is then
used in a very important macro for atomic variable access throughout
most of the kernel. The inner most macro, is passed a GNU C statement
expression. In this case, we have macro arguments that are GNU C
statement expressions, which can contain a significant number of tokens.
The upstream kernel patch caused significant build time regressions for
both Clang and GCC. Since then, some of the nesting has been removed via
@melver, which helps gain back most of the lost compilation time. [2]
Profiles collected [3] from compilations of the slowest TU for us in the
kernel show:
* 51.4% time spent in clang::TokenLexer::updateLocForMacroArgTokens
* 48.7% time spent in clang::SourceManager::getFileIDLocal
* 35.5% time spent in clang::SourceManager::isOffsetInFileID
(mostly calls from the former through to the latter).
So it seems we have a pathological case for which properly tracking the
SourceLocation of macro arguments is significantly harming build
performance. This stands out in referenced flame graph.
In fact, this case was identified previously as being problematic in
commit 3339c568c4 ("[Lex] Speed up updateConsecutiveMacroArgTokens (NFC)")
Looking at the above call chain, there's 3 things we can do to speed up
this case.
1. TokenLexer::updateConsecutiveMacroArgTokens() calls
SourceManager::isWrittenInSameFile() which calls
SourceManager::getFileID(), which is both very hot and very expensive
to call. SourceManger has a one entry cache, member LastFileIDLookup.
If that isn't the FileID for a give source location offset, we fall
back to a linear probe, and then to a binary search for the FileID.
These fallbacks update the one entry cache, but noticeably they do
not for the case of macro expansions!
For the slowest TU to compile in the Linux kernel, it seems that we
miss about 78.67% of the 68 million queries we make to getFileIDLocal
that we could have had cache hits for, had we saved the macro
expansion source location's FileID in the one entry cache. [4]
I tried adding a separate cache item for macro expansions, and to
check that before the linear then binary search fallbacks, but did
not find it faster than simply allowing macro expansions into the one
item cache. This alone nets us back a lot of the performance loss.
That said, this is a modification of caching logic, which is playing
with a double edged sword. While it significantly improves the
pathological case, its hard to say that there's not an equal but
opposite pathological case that isn't regressed by this change.
Though non-pathological cases of builds of the Linux kernel before
[0] are only slightly improved (<1%) and builds of LLVM itself don't
change due to this patch.
Should future travelers find this change to significantly harm their
build times, I encourage them to feel empowered to revert this
change.
2. SourceManager::getFileIDLocal has a FIXME hinting that the call to
SourceManager::isOffsetInFileID could be made much faster since
isOffsetInFileID is generic in the sense that it tries to handle the
more generic case of "local" (as opposed to "loaded") files, though
the caller has already determined the file to be local. This patch
implements a new method that specialized for use when the caller
already knows the file is local, then use that in
TokenLexer::updateLocForMacroArgTokens. This should be less
controversial than 1, and is likely an across the board win. It's
much less significant for the pathological case, but still a
measurable win once we have fallen to the final case of binary
search. D82497
3. A bunch of methods in SourceManager take a default argument.
SourceManager::getLocalSLocEntry doesn't do anything with this
argument, yet many callers of getLocalSLocEntry setup, pass, then
check this argument. This is wasted work. D82498
With this patch applied, the above profile [5] for the same pathological
input looks like:
* 25.1% time spent in clang::TokenLexer::updateLocForMacroArgTokens
* 17.2% time spent in clang::SourceManager::getFileIDLocal
and clang::SourceManager::isOffsetInFileID is no longer called, and thus
falls out of the profile.
There may be further improvements to the general problem of "what
interval contains one number out of millions" than the current use of a
one item cache, followed by linear probing, followed by binary
searching. We might even be able to do something smarter in
TokenLexer::updateLocForMacroArgTokens.
[0] cdd28ad2d8
[1] https://github.com/ClangBuiltLinux/linux/issues/1032
[2] https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=locking/kcsan&id=a5dead405f6be1fb80555bdcb77c406bf133fdc8
[3] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-633712667
[4] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-633741923
[5] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-634932736
Reviewed By: kadircet
Differential Revision: https://reviews.llvm.org/D80681
Forked from D80681.
getLocalSLocEntry() has an unused parameter used to satisfy an interface
of libclang (see getInclusions() in
clang/tools/libclang/CIndexInclusionStack.cpp). It's pointless for
callers to construct/pass/check this inout parameter that can never
signify that a FileID is invalid.
Reviewed By: kadircet
Differential Revision: https://reviews.llvm.org/D82498
This reverts commit b55d723ed6.
Reapply Modify FPFeatures to use delta not absolute settings
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
When writing a unit test on replacing standard epilogue sequences with `BR __mspabi_func_epilog_<N>`, by manually asm-clobbering `rN` - `r10` for N = 4..10, everything worked well except for seeming inability to clobber r4.
The problem was that MSP430 code generator of LLVM used an obsolete name FP for that register. Things were worse because when `llc` read an unknown register name, it silently ignored it.
That is, I cannot use `fp` register name from the C code because Clang does not accept it (exactly like GCC). But the accepted name `r4` is not recognised by `llc` (it can be used in listings passed to `llvm-mc` and even `fp` is replace to `r4` by `llvm-mc`). So I can specify any of `fp` or `r4` for the string literal of `asm(...)` but nothing in the clobber list.
This patch replaces `MSP430::FP` with `MSP430::R4` in the backend code (even [MSP430 EABI](http://www.ti.com/lit/an/slaa534/slaa534.pdf) doesn't mention FP as a register name). The R0 - R3 registers, on the other hand, are left as is in the backend code (after all, they have some special meaning on the ISA level). It is just ensured clang is renaming them as expected by the downstream tools. There is probably not much sense in **marking them clobbered** but rename them //just in case// for use at potentially different contexts.
Differential Revision: https://reviews.llvm.org/D82184
These features implicitly enabled XSAVE in the frontend, but not
the backend. Disabling XSAVE in the frontend disabled XSAVEOPT, but
not the other 2. Nothing happened in the backend.
The PREFETCHW instruction was originally part of the 3DNow. But
it was given its own CPUID bit on later CPUs just before 3DNow
was deprecated.
We were setting the -mprfchw flag if -m3dnow was passed or the CPU
supported 3dnow unless -mno-prfchw was passed. But -march=native
on a CPU without the PRFCHW CPUID bit set will pass -mno-prfchw.
So -march=k8 will behave differently than -march=native on a K8
for example.
So remove this implicit setting from the frontend and instead
enable the backend to use PREFETCHW if 3dnow OR prfchw is enabled.
Also enable PRFCHW flag on amdfam10/barcelona which seems to be
where this CPUID bit was introduced. That CPU also supported
3dnow.
The PREFETCHW instruction was originally part of the 3DNow. But
it was given its own CPUID bit on later CPUs just before 3DNow
was deprecated.
We were setting the -mprfchw flag if -m3dnow was passed or the CPU
supported 3dnow unless -mno-prfchw was passed. But -march=native
on a CPU without the PRFCHW CPUID bit set will pass -mno-prfchw.
So -march=k8 will behave differently than -march=native on a K8
for example.
So remove this implicit setting from the frontend and instead
enable the backend to use PREFETCHW if 3dnow OR prfchw is enabled.
Also enable PRFCHW flag on amdfam10/barcelona which seems to be
where this CPUID bit was introduced. That CPU also supported
3dnow.
Summary:
A recent Linux kernel commit exposed a performance cliff in Clang. Calls
to SourceManager::getFileIDLocal() when there's a cache miss against
LastFileIDLookup can be relatively expensive, as getFileIDLocal() tries
a few linear probes, then falls back to binary search. The use of
SourceManager::isOffsetInFileID() is also relatively expensive (both
isOffsetInFileID and getFileIDLocal dominated a trace of the performance
cliff case).
As a FIXME notes (and as @kadircet helpfully noted in review of D80681),
there's a few optimizations we can do here since we've already
identified that an offset is local (as opposed to "loaded").
This patch was forked off of D80681, which additionally did this and
modified some caching behavior, as we expect this change to be less
controversial.
In terms of optimizations, we've already determined that the SLocOffset
parameter to SourceManager::getFileIDLocal() is local in the caller
SourceManager::getFileIDSlow(). Also, there's an early continue in the
binary search loop in getFileIDLocal() that are duplicated in
isOffsetInFileID() as pointed out by @kadircet.
Take advantage of these to optimize the binary search patch, and remove
the FIXME.
Reviewers: kadircet
Reviewed By: kadircet
Subscribers: cfe-commits, kadircet, srhines
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82497
Summary:
Previously OMPD_unknown was last item in the Directive enumeration and its position was
used in various comparison and assertion. With the new Directive enumeration, this should be
change with llvm::omp::Directive_enumSize. This patch fix two place where it was not done in
D81736.
Reviewers: vdmitrie, jdoerfert, jdenny
Reviewed By: jdoerfert
Subscribers: yaxunl, guansong, sstefan1, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82518
This patch enables the following macros when their corresponding
target attributes are set:
__ARM_FEATURE_SVE (+sve)
__ARM_FEATURE_SVE2 (+sve2)
__ARM_FEATURE_SVE2_AES (+sve2-aes)
__ARM_FEATURE_SVE2_BITPERM (+sve2-bitperm)
__ARM_FEATURE_SVE2_SHA3 (+sve2-sha3)
__ARM_FEATURE_SVE2_SM4 (+sve2-sm4)
This implies that the base SVE and SVE2 ACLE (00bet2) are now feature
complete, meaning that all intrinsics are implemented in LLVM and Clang.
Disclaimer:
To implement the ACLE we have had to fix up many parts of LLVM to make it
support scalable vectors. We have also used many target-specific intrinsics
to reduce reliance on parts of LLVM where we know scalable vectors may
not yet be handled properly (e.g. some transformation might drop the
'scalable' flag on a vector type). While we've done a best effort with
the limited testing that is available to us, we're still working to improve the
stability of the implementation. Additionally, Clang may print warnings
that code may have miscompiled. We find this often to be a false alarm
where the wrong interfaces have been used in LLVM and where resulting
code is not actually incorrect. However, this warrants a bug report
and investigation. If you find any bugs or issues, please raise them on
bugs.llvm.org and let us know!
Reviewers: rengolin, efriedma, david-arm, SjoerdMeijer
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D81725
Anton Zabaznov