multiple stores with a single load. We create the wide loads and stores (and their chains)
before we remove the scalar loads and stores and fix the DAG chain. We attempted to merge
loads with a different chain. When that happened, the assumption that it is safe to RAUW
broke and a cycle was introduced.
llvm-svn: 165148
is not profitable in many cases because modern processors perform multiple stores
in parallel and merging stores prior to merging requires extra work. We handle two main cases:
1. Store of multiple consecutive constants:
q->a = 3;
q->4 = 5;
In this case we store a single legal wide integer.
2. Store of multiple consecutive loads:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
In this case we load/store either ilegal vector registers or legal wide integer registers.
llvm-svn: 165125
Enable the pass by default for targets that request it, and change the
-enable-early-ifcvt to the opposite -disable-early-ifcvt.
There are still some x86 regressions when enabling early if-conversion
because of the missing machine models. Disable the pass for x86 until
machine models are added.
llvm-svn: 165075
X86DAGToDAGISel::PreprocessISelDAG(), isel is moving load inside
callseq_start / callseq_end so it can be folded into a call. This can
create a cycle in the DAG when the call is glued to a copytoreg. We
have been lucky this hasn't caused too many issues because the pre-ra
scheduler has special handling of call sequences. However, it has
caused a crash in a specific tailcall case.
rdar://12393897
llvm-svn: 165072
JoinVals::pruneValues() calls LIS->pruneValue() to avoid conflicts when
overlapping two different values. This produces a set of live range end
points that are used to reconstruct the live range (with SSA update)
after joining the two registers.
When a value is pruned twice, the set of end points was insufficient:
v1 = DEF
v1 = REPLACE1
v1 = REPLACE2
KILL v1
The end point at KILL would only reconstruct the live range from
REPLACE2 to KILL, leaving the range REPLACE1-REPLACE2 dead.
Add REPLACE2 as an end point in this case so the full live range is
reconstructed.
This fixes PR13999.
llvm-svn: 165056
- Update maximal stack alignment when stack arguments are prepared before a
call.
- Test cases are enhanced to show it's not a Win32 specific issue but a generic
one.
llvm-svn: 164946
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
llvm-svn: 164910
buildbots. Original commit message:
A DAGCombine optimization for merging consecutive stores. This optimization is not profitable in many cases
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
llvm-svn: 164890
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
llvm-svn: 164885
scalar-to-vector conversion that we cannot handle. For instance, when an invalid
constraint is used in an inline asm statement.
<rdar://problem/12284092>
llvm-svn: 164662
scalar-to-vector conversion that we cannot handle. For instance, when an invalid
constraint is used in an inline asm statement.
<rdar://problem/12284092>
llvm-svn: 164657
Even out-of-line jump tables can be in the code section, so mark them
as data-regions for those targets which support the directives.
rdar://12362871&12362974
llvm-svn: 164571
The expression based expansion too often results in IR level optimizations
splitting the intermediate values into separate basic blocks, preventing
the formation of the VBSL instruction as the code author intended. In
particular, LICM would often hoist part of the computation out of a loop.
rdar://11011471
llvm-svn: 164340
A PHI can't create interference on its own. If two live ranges interfere
at a PHI, they must also interfere when leaving one of the PHI
predecessors.
llvm-svn: 164330
- Rewrite/merge pseudo-atomic instruction emitters to address the
following issue:
* Reduce one unnecessary load in spin-loop
previously the spin-loop looks like
thisMBB:
newMBB:
ld t1 = [bitinstr.addr]
op t2 = t1, [bitinstr.val]
not t3 = t2 (if Invert)
mov EAX = t1
lcs dest = [bitinstr.addr], t3 [EAX is implicit]
bz newMBB
fallthrough -->nextMBB
the 'ld' at the beginning of newMBB should be lift out of the loop
as lcs (or CMPXCHG on x86) will load the current memory value into
EAX. This loop is refined as:
thisMBB:
EAX = LOAD [MI.addr]
mainMBB:
t1 = OP [MI.val], EAX
LCMPXCHG [MI.addr], t1, [EAX is implicitly used & defined]
JNE mainMBB
sinkMBB:
* Remove immopc as, so far, all pseudo-atomic instructions has
all-register form only, there is no immedidate operand.
* Remove unnecessary attributes/modifiers in pseudo-atomic instruction
td
* Fix issues in PR13458
- Add comprehensive tests on atomic ops on various data types.
NOTE: Some of them are turned off due to missing functionality.
- Revise tests due to the new spin-loop generated.
llvm-svn: 164281
A common coalescing conflict in vector code is lane insertion:
%dst = FOO
%src = BAR
%dst:ssub0 = COPY %src
The live range of %src interferes with the ssub0 lane of %dst, but that
lane is never read after %src would have clobbered it. That makes it
safe to merge the live ranges and eliminate the COPY:
%dst = FOO
%dst:ssub0 = BAR
This patch teaches the new coalescer to resolve conflicts where dead
vector lanes would be clobbered, at least as long as the clobbered
vector lanes don't escape the basic block.
llvm-svn: 164250
- Merge the processing of LOAD_ADD with other atomic load-arith
operations
- Separate the logic getting target constant for atomic-load-op and add
an optimization for atomic-load-add on i16 with negative value
- Optimize a minor case for atomic-fetch-add i16 with negative operand. Test
case is revised.
llvm-svn: 164243
lib/Target/PowerPC/PPCISelLowering.{h,cpp}
Rename LowerFormalArguments_Darwin to LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerFormalArguments_SVR4 to LowerFormalArguments_32SVR4.
Receive small structs right-justified in LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerCall_Darwin to LowerCall_Darwin_Or_64SVR4.
Rename LowerCall_SVR4 to LowerCall_32SVR4.
Pass small structs right-justified in LowerCall_Darwin_Or_64SVR4.
test/CodeGen/PowerPC/structsinregs.ll
New test.
llvm-svn: 164228
aligned address. Based on patch by David Peixotto.
Also use vld1.64 / vst1.64 with 128-bit alignment to take advantage of alignment
hints. rdar://12090772, rdar://12238782
llvm-svn: 164089
Add LIS::pruneValue() and extendToIndices(). These two functions are
used by the register coalescer when merging two live ranges requires
more than a trivial value mapping as supported by LiveInterval::join().
The pruneValue() function can remove the part of a value number that is
going to conflict in join(). Afterwards, extendToIndices can restore the
live range, using any new dominating value numbers and updating the SSA
form.
Use this complex value mapping to support merging a register into a
vector lane that has a conflicting value, but the clobbered lane is
undef.
llvm-svn: 164074
It had patterns for zext-loading and extending. This commit adds patterns for loading a wide type, performing a bitcast,
and extending. This is an odd pattern, but it is commonly used when writing code with intrinsics.
rdar://11897677
llvm-svn: 163995
- Enhance the fix to PR12312 to support wider integer, such as 256-bit
integer. If more than 1 fully evaluated vectors are found, POR them
first followed by the final PTEST.
llvm-svn: 163832
- Find a legal vector type before casting and extracting element from it.
- As the new vector type may have more than 2 elements, build the final
hi/lo pair by BFS pairing them from bottom to top.
llvm-svn: 163830
Add a PatFrag to match X86tcret using 6 fixed registers or less. This
avoids folding loads into TCRETURNmi64 using 7 or more volatile
registers.
<rdar://problem/12282281>
llvm-svn: 163819
by xoring the high-bit. This fails if the source operand is a vector because we need to negate
each of the elements in the vector.
Fix rdar://12281066 PR13813.
llvm-svn: 163802
are within the lifetime zone. Sometime legitimate usages of allocas are
hoisted outside of the lifetime zone. For example, GEPS may calculate the
address of a member of an allocated struct. This commit makes sure that
we only check (abort regions or assert) for instructions that read and write
memory using stack frames directly. Notice that by allowing legitimate
usages outside the lifetime zone we also stop checking for instructions
which use derivatives of allocas. We will catch less bugs in user code
and in the compiler itself.
llvm-svn: 163791
We don't have enough GR64_TC registers when calling a varargs function
with 6 arguments. Since %al holds the number of vector registers used,
only %r11 is available as a scratch register.
This means that addressing modes using both base and index registers
can't be folded into TCRETURNmi64.
<rdar://problem/12282281>
llvm-svn: 163761
- BlockAddress has no support of BA + offset form and there is no way to
propagate that offset into machine operand;
- Add BA + offset support and a new interface 'getTargetBlockAddress' to
simplify target block address forming;
- All targets are modified to use new interface and X86 backend is enhanced to
support BA + offset addressing.
llvm-svn: 163743
nonvolatile condition register fields across calls under the SVR4 ABIs.
* With the 64-bit ABI, the save location is at a fixed offset of 8 from
the stack pointer. The frame pointer cannot be used to access this
portion of the stack frame since the distance from the frame pointer may
change with alloca calls.
* With the 32-bit ABI, the save location is just below the general
register save area, and is accessed via the frame pointer like the rest
of the save areas. This is an optional slot, so it must only be created
if any of CR2, CR3, and CR4 were modified.
* For both ABIs, save/restore logic is generated only if one of the
nonvolatile CR fields were modified.
I also took this opportunity to clean up an extra FIXME in
PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless
for the 64-bit ABI, so I removed them for correctness and efficiency.
Fixes PR13708 and partially also PR13623. It lets us enable exception handling
on PPC64.
Patch by William J. Schmidt!
llvm-svn: 163713
SelectionDAG::getConstantFP(double Val, EVT VT, bool isTarget);
should not be used when Val is not a simple constant (as the comment in
SelectionDAG.h indicates). This patch avoids using this function
when folding an unknown constant through a bitcast, where it cannot be
guaranteed that Val will be a simple constant.
llvm-svn: 163703
The input program may contain intructions which are not inside lifetime
markers. This can happen due to a bug in the compiler or due to a bug in
user code (for example, returning a reference to a local variable).
This commit adds checks that all of the instructions in the function and
invalidates lifetime ranges which do not contain all of the instructions.
llvm-svn: 163678
The ARM backend can eliminate cmp instructions by reusing flags from a
nearby sub instruction with similar arguments.
Don't do that if the sub is predicated - the flags are not written
unconditionally.
<rdar://problem/12263428>
llvm-svn: 163535
- If a boolean value is generated from CMOV and tested as boolean value,
simplify the use of test result by referencing the original condition.
RDRAND intrinisc is one of such cases.
llvm-svn: 163516
The RegisterCoalescer understands overlapping live ranges where one
register is defined as a copy of the other. With this change, register
allocators using LiveRegMatrix can do the same, at least for copies
between physical and virtual registers.
When a physreg is defined by a copy from a virtreg, allow those live
ranges to overlap:
%CL<def> = COPY %vreg11:sub_8bit; GR32_ABCD:%vreg11
%vreg13<def,tied1> = SAR32rCL %vreg13<tied0>, %CL<imp-use,kill>
We can assign %vreg11 to %ECX, overlapping the live range of %CL.
llvm-svn: 163336
If we have a BUILD_VECTOR that is mostly a constant splat, it is often better to splat that constant then insertelement the non-constant lanes instead of insertelementing every lane from an undef base.
llvm-svn: 163304
Now that it is possible to dynamically tie MachineInstr operands,
predicated instructions are possible in SSA form:
%vreg3<def> = SUBri %vreg1, -2147483647, pred:14, pred:%noreg, %opt:%noreg
%vreg4<def,tied1> = MOVCCr %vreg3<tied0>, %vreg1, %pred:12, pred:%CPSR
Becomes a predicated SUBri with a tied imp-use:
SUBri %vreg1, -2147483647, pred:13, pred:%CPSR, opt:%noreg, %vreg1<imp-use,tied0>
This means that any instruction that is safe to move can be folded into
a MOVCC, and the *CC pseudo-instructions are no longer needed.
The test case changes reflect that Thumb2SizeReduce recognizes the
predicated instructions. It didn't understand the pseudos.
llvm-svn: 163274
Previous patch accidentally decided it couldn't convert a VFP to a
NEON instruction after it had already destroyed the old one. Not a
good move.
llvm-svn: 163230
subreg_hireg of register pair Rp.
* lib/Target/Hexagon/HexagonPeephole.cpp(PeepholeDoubleRegsMap): New
DenseMap similar to PeepholeMap that additionally records subreg info
too.
(runOnMachineFunction): Record information in PeepholeDoubleRegsMap
and copy propagate the high sub-reg of Rp0 in Rp1 = lsr(Rp0, #32) to
the instruction Rx = COPY Rp1:logreg_subreg.
* test/CodeGen/Hexagon/remove_lsr.ll: New test.
llvm-svn: 163214
- CodeGenPrepare pass for identifying div/rem ops
- Backend specifies the type mapping using addBypassSlowDivType
- Enabled only for Intel Atom with O2 32-bit -> 8-bit
- Replace IDIV with instructions which test its value and use DIVB if the value
is positive and less than 256.
- In the case when the quotient and remainder of a divide are used a DIV
and a REM instruction will be present in the IR. In the non-Atom case
they are both lowered to IDIVs and CSE removes the redundant IDIV instruction,
using the quotient and remainder from the first IDIV. However,
due to this optimization CSE is not able to eliminate redundant
IDIV instructions because they are located in different basic blocks.
This is overcome by calculating both the quotient (DIV) and remainder (REM)
in each basic block that is inserted by the optimization and reusing the result
values when a subsequent DIV or REM instruction uses the same operands.
- Test cases check for the presents of the optimization when calculating
either the quotient, remainder, or both.
Patch by Tyler Nowicki!
llvm-svn: 163150
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 163136
For example, the ARM target does not have efficient ISel handling for vector
selects with scalar conditions. This patch adds a TLI hook which allows the
different targets to report which selects are supported well and which selects
should be converted to CF duting codegen prepare.
llvm-svn: 163093
This reverts commit 5dd9e214fb92847e947f9edab170f9b4e52b908f.
Thanks to Duncan for explaining how this should have been done.
Conflicts:
test/CodeGen/X86/vec_select.ll
llvm-svn: 163064
output chain is correctly setup.
As an example, if the original load must happen before later stores, we need
to make sure the constructed VZEXT_LOAD is constrained to be before the stores.
rdar://11457792
llvm-svn: 163036
- In addition to undefined, if V2 is zero vector, skip 2nd PSHUFB and POR as
well as PSHUFB will zero elements with negative indices.
Patch by Sriram Murali <sriram.murali@intel.com>
llvm-svn: 163018
because it does not support CMOV of vectors. To implement this efficientlyi, we broadcast the condition bit and use a sequence of NAND-OR
to select between the two operands. This is the same sequence we use for targets that don't have vector BLENDs (like SSE2).
rdar://12201387
llvm-svn: 162926
- Add 'UseSSEx' to force SSE legacy insn not being selected when AVX is
enabled.
As the penalty of inter-mixing SSE and AVX instructions, we need
prevent SSE legacy insn from being generated except explicitly
specified through some intrinsics. For patterns supported by both
SSE and AVX, so far, we force AVX insn will be tried first relying on
AddedComplexity or position in td file. It's error-prone and
introduces bugs accidentally.
'UseSSEx' is disabled when AVX is turned on. For SSE insns inherited
by AVX, we need this predicate to force VEX encoding or SSE legacy
encoding only.
For insns not inherited by AVX, we still use the previous predicates,
i.e. 'HasSSEx'. So far, these insns fall into the following
categories:
* SSE insns with MMX operands
* SSE insns with GPR/MEM operands only (xFENCE, PREFETCH, CLFLUSH,
CRC, and etc.)
* SSE4A insns.
* MMX insns.
* x87 insns added by SSE.
2 test cases are modified:
- test/CodeGen/X86/fast-isel-x86-64.ll
AVX code generation is different from SSE one. 'vcvtsi2sdq' cannot be
selected by fast-isel due to complicated pattern and fast-isel
fallback to materialize it from constant pool.
- test/CodeGen/X86/widen_load-1.ll
AVX code generation is different from SSE one after fixing SSE/AVX
inter-mixing. Exec-domain fixing prefers 'vmovapd' instead of
'vmovaps'.
llvm-svn: 162919
- The root cause is that target constant materialization in X86 fast-isel
creates a PC-rel addressing which may overflow 32-bit range in non-Small code
model if .rodata section is allocated too far away from code segment in
MCJIT, which uses Large code model so far.
- Follow the similar logic to fix non-Small code model in fast-isel by skipping
non-Small code model.
llvm-svn: 162881
We need to reserve space for the mandatory traceback fields,
though leaving them as zero is appropriate for now.
Although the ABI calls for these fields to be filled in fully, no
compiler on Linux currently does this, and GDB does not read these
fields. GDB uses the first word of zeroes during exception handling to
find the end of the function and the size field, allowing it to compute
the beginning of the function. DWARF information is used for everything
else. We need the extra 8 bytes of pad so the size field is found in
the right place.
As a comparison, GCC fills in a few of the fields -- language, number
of saved registers -- but ignores the rest. IBM's proprietary OSes do
make use of the full traceback table facility.
Patch by Bill Schmidt.
llvm-svn: 162854
traceback table on PowerPC64. This helps gdb handle exceptions. The other
mandatory fields are ignored by gdb and harder to implement so just add
there a FIXME.
Patch by Bill Schmidt. PR13641.
llvm-svn: 162778
- Add a target-specific DAG optimization to recognize a pattern PTEST-able.
Such a pattern is a OR'd tree with X86ISD::OR as the root node. When
X86ISD::OR node has only its flag result being used as a boolean value and
all its leaves are extracted from the same vector, it could be folded into an
X86ISD::PTEST node.
llvm-svn: 162735
These extra flags are not required to properly order the atomic
load/store instructions. SelectionDAGBuilder chains atomics as if they
were volatile, and SelectionDAG::getAtomic() sets the isVolatile bit on
the memory operands of all atomic operations.
The volatile bit is enough to order atomic loads and stores during and
after SelectionDAG.
This means we set mayLoad on atomic_load, mayStore on atomic_store, and
mayLoad+mayStore on the remaining atomic read-modify-write operations.
llvm-svn: 162733
Instructions emitted to compute branch offsets now use immediate operands
instead of symbolic labels. This change was needed because there were problems
when R_MIPS_HI16/LO16 relocations were used to make shared objects.
llvm-svn: 162731
In SelectionDAGLegalize::ExpandLegalINT_TO_FP, expand INT_TO_FP nodes without
using any f64 operations if f64 is not a legal type.
Patch by Stefan Kristiansson.
llvm-svn: 162728
Allow load-immediates to be rematerialised in the register coalescer for
PPC. This makes test/CodeGen/PowerPC/big-endian-formal-args.ll fail,
because it relies on a register move getting emitted. The immediate load is
equivalent, so change this test case.
Patch by Tobias von Koch.
llvm-svn: 162727
The 32-bit ABI requires CR bit 6 to be set if the call has fp arguments and
unset if it doesn't. The solution up to now was to insert a MachineNode to
set/unset the CR bit, which produces a CR vreg. This vreg was then copied
into CR bit 6. When the register allocator saw a bunch of these in the same
function, it allocated the set/unset CR bit in some random CR register (1
extra instruction) and then emitted CR moves before every vararg function
call, rather than just setting and unsetting CR bit 6 directly before every
vararg function call. This patch instead inserts a PPCcrset/PPCcrunset
instruction which are then matched by a dedicated instruction pattern.
Patch by Tobias von Koch.
llvm-svn: 162725
The zeroextend IR instruction is lowered to an 'and' node with an immediate
mask operand, which in turn gets legalised to a sequence of ori's & ands.
This can be done more efficiently using the rldicl instruction.
Patch by Tobias von Koch.
llvm-svn: 162724
Previously, instructions without a primary patterns wouldn't get their
properties inferred. Now, we use all single-instruction patterns for
inference, including 'def : Pat<>' instances.
This causes a lot of instruction flags to change.
- Many instructions no longer have the UnmodeledSideEffects flag because
their flags are now inferred from a pattern.
- Instructions with intrinsics will get a mayStore flag if they already
have UnmodeledSideEffects and a mayLoad flag if they already have
mayStore. This is because intrinsics properties are linear.
- Instructions with atomic_load patterns get a mayStore flag because
atomic loads can't be reordered. The correct workaround is to create
pseudo-instructions instead of using normal loads. PR13693.
llvm-svn: 162614
the case of multiple edges from one block to another.
A simple example is a switch statement with multiple values to the same
destination. The definition of an edge is modified from a pair of blocks to
a pair of PredBlock and an index into the successors.
Also set the weight correctly when building SelectionDAG from LLVM IR,
especially when converting a Switch.
IntegersSubsetMapping is updated to calculate the weight for each cluster.
llvm-svn: 162572
IR that hasn't been through SimplifyCFG can look like this:
br i1 %b, label %r, label %r
Make sure we don't create duplicate Machine CFG edges in this case.
Fix the machine code verifier to accept conditional branches with a
single CFG edge.
llvm-svn: 162230
this allows for better code generation.
Added a new DAGCombine transformation to convert FMAX and FMIN to FMANC and
FMINC, which are commutative.
For example:
movaps %xmm0, %xmm1
movsd LC(%rip), %xmm0
minsd %xmm1, %xmm0
becomes:
minsd LC(%rip), %xmm0
llvm-svn: 162187
Add these transformations to the existing add/sub ones:
(and (select cc, -1, c), x) -> (select cc, x, (and, x, c))
(or (select cc, 0, c), x) -> (select cc, x, (or, x, c))
(xor (select cc, 0, c), x) -> (select cc, x, (xor, x, c))
The selects can then be transformed to a single predicated instruction
by peephole.
This transformation will make it possible to eliminate the ISD::CAND,
COR, and CXOR custom DAG nodes.
llvm-svn: 162176
arithmetic instructions. However, when small data types are used, a truncate
node appears between the SETCC node and the arithmetic operation. This patch
adds support for this pattern.
Before:
xorl %esi, %edi
testb %dil, %dil
setne %al
ret
After:
xorb %dil, %sil
setne %al
ret
rdar://12081007
llvm-svn: 162160
PEI can't handle the pseudo-instructions. This can be removed when the
pseudo-instructions are replaced by normal predicated instructions.
Fixes PR13628.
llvm-svn: 162130
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
llvm-svn: 162097
It is not my plan to duplicate the entire ARM instruction set with
predicated versions. We need a way of representing predicated
instructions in SSA form without requiring a separate opcode.
Then the pseudo-instructions can go away.
llvm-svn: 162061
Without fastcc support, the caller just falls through to CallingConv::C
for fastcc, but callee still uses fastcc, this inconsistency of calling
convention is a problem, and fastcc support can fix it.
llvm-svn: 162013
The ARM select instructions are just predicated moves. If the select is
the only use of an operand, the instruction defining the operand can be
predicated instead, saving one instruction and decreasing register
pressure.
This implementation can turn AND/ORR/EOR instructions into their
corresponding ANDCC/ORRCC/EORCC variants. Ideally, we should be able to
predicate any instruction, but we don't yet support predicated
instructions in SSA form.
llvm-svn: 161994
around. That's not how we do things. Besides, the commit message tells us that
it is covered by the GCC test suite.
------------------------------------------------------------------------
r127497 | zwarich | 2011-03-11 13:51:56 -0800 (Fri, 11 Mar 2011) | 3 lines
Fix the GCC test suite issue exposed by r127477, which was caused by stack
protector insertion not working correctly with unreachable code. Since that
revision was rolled out, this test doesn't actual fail before this fix.
------------------------------------------------------------------------
llvm-svn: 161985
reversed. This leads to wrong codegen for float-to-half conversion
intrinsics which are used to support storage-only fp16 type.
NEON variants of same instructions are fine.
llvm-svn: 161907
- FP_EXTEND only support extending from vectors with matching elements.
This results in the scalarization of extending to v2f64 from v2f32,
which will be legalized to v4f32 not matching with v2f64.
- add X86-specific VFPEXT supproting extending from v4f32 to v2f64.
- add BUILD_VECTOR lowering helper to recover back the original
extending from v4f32 to v2f64.
- test case is enhanced to include different vector width.
llvm-svn: 161894
and allow some optimizations to turn conditional branches into unconditional.
This commit adds a simple control-flow optimization which merges two consecutive
basic blocks which are connected by a single edge. This allows the codegen to
operate on larger basic blocks.
rdar://11973998
llvm-svn: 161852
It is still possible to if-convert if the tail block has extra
predecessors, but the tail phis must be rewritten instead of being
removed.
llvm-svn: 161781
- FCMOV only supports a subset of X86 conditions. Skip boolean
simplification if X86 condition is not valid for FCMOV.
- add a minimal test case for PR13577.
llvm-svn: 161732
FeatureFastUAMem for Nehalem, Westmere and Sandy Bridge.
FeatureFastUAMem is already on if we pass in nehalem or westmere as a command
argument.
rdar: 7252306
llvm-svn: 161717
- if a boolean test (X86ISD::CMP or X86ISD:SUB) checks a boolean value
generated from X86ISD::SETCC, try to simplify the boolean value
generation and checking by reusing the original EFLAGS with proper
condition code
- add hooks to X86 specific SETCC/BRCOND/CMOV, the major 3 places
consuming EFLAGS
part of patches fixing PR12312
llvm-svn: 161687
When replacing Old with New, it can happen that New is already a
successor. Add the old and new edge weights instead of creating a
duplicate edge.
llvm-svn: 161653
This makes it possible to speed up def_iterator by stopping at the first
use. This makes def_empty() and getUniqueVRegDef() much faster when
there are many uses.
In a +Asserts build, LiveVariables is 100x faster in one case because
getVRegDef() has an assertion that would scan to the end of a
def_iterator chain.
Spill weight calculation is significantly faster (300x in one case)
because isTriviallyReMaterializable() calls MRI->isConstantPhysReg(%RIP)
which calls def_empty(%RIP).
llvm-svn: 161634
Use a more conventional doubly linked list where the Prev pointers form
a cycle. This means it is no longer necessary to adjust the Prev
pointers when reallocating the VRegInfo array.
The test changes are required because the register allocation hint is
using the use-list order to break ties.
llvm-svn: 161633
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 161581
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
llvm-svn: 161462
Previously, MBP essentially aligned every branch target it could. This
bloats code quite a bit, especially non-looping code which has no real
reason to prefer aligned branch targets so heavily.
As Andy said in review, it's still a bit odd to do this without a real
cost model, but this at least has much more plausible heuristics.
Fixes PR13265.
llvm-svn: 161409
If the result of a common subexpression is used at all uses of the candidate
expression, CSE should not increase the live range of the common subexpression.
rdar://11393714 and rdar://11819721
llvm-svn: 161396
The MFTB instruction itself is being phased out, and its functionality
is provided by MFSPR. According to the ISA docs, using MFSPR works on all known
chips except for the 601 (which did not have a timebase register anyway)
and the POWER3.
Thanks to Adhemerval Zanella for pointing this out!
llvm-svn: 161346
On PPC64, this can be done with a simple TableGen pattern.
To enable this, I've added the (otherwise missing) readcyclecounter
SDNode definition to TargetSelectionDAG.td.
llvm-svn: 161302
This patch is mostly just refactoring a bunch of copy-and-pasted code, but
it also adds a check that the call instructions are readnone or readonly.
That check was already present for sin, cos, sqrt, log2, and exp2 calls, but
it was missing for the rest of the builtins being handled in this code.
llvm-svn: 161282
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
llvm-svn: 161262
Fast isel doesn't currently have support for translating builtin function
calls to target instructions. For embedded environments where the library
functions are not available, this is a matter of correctness and not
just optimization. Most of this patch is just arranging to make the
TargetLibraryInfo available in fast isel. <rdar://problem/12008746>
llvm-svn: 161232
Add more comments and use early returns to reduce nesting in isLoadFoldable.
Also disable folding for V_SET0 to avoid introducing a const pool entry and
a const pool load.
rdar://10554090 and rdar://11873276
llvm-svn: 161207
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
This patch is a rework of r160919 and was tested on clang self-host on my local
machine.
rdar://10554090 and rdar://11873276
llvm-svn: 161152
MipsSEFrameLowering.
Implement MipsSEFrameLowering::hasReservedCallFrame. Call frames will not be
reserved if there is a call with a large call frame or there are variable sized
objects on the stack.
llvm-svn: 161090
The frame object which points to the dynamically allocated area will not be
needed after changes are made to cease reserving call frames.
llvm-svn: 161076
arguments to the stack in MipsISelLowering::LowerCall, use stack pointer and
integer offset operands rather than frame object operands.
llvm-svn: 161068
single-precision load and store.
Also avoid selecting LUXC1 and SUXC1 instructions during isel. It is incorrect
to map unaligned floating point load/store nodes to these instructions.
llvm-svn: 161063
One motivating example is to sink an instruction from a basic block which has
two successors: one outside the loop, the other inside the loop. We should try
to sink the instruction outside the loop.
rdar://11980766
llvm-svn: 161062
We are extending live ranges, so kill flags are not accurate. They
aren't needed until they are recomputed after RA anyway.
<rdar://problem/11950722>
llvm-svn: 161023
We branch to the successor with higher edge weight first.
Convert from
je LBB4_8 --> to outer loop
jmp LBB4_14 --> to inner loop
to
jne LBB4_14
jmp LBB4_8
PR12750
rdar: 11393714
llvm-svn: 161018
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
rdar://10554090 and rdar://11873276
llvm-svn: 160919
It is possible that an instruction can use and update EFLAGS.
When checking the safety, we should check the usage of EFLAGS first before
declaring it is safe to optimize due to the update.
llvm-svn: 160912
These idempotent sub-register indices don't do anything --- They simply
map XMM registers to themselves. They no longer affect register classes
either since the SubRegClasses field has been removed from Target.td.
This patch replaces XMM->XMM EXTRACT_SUBREG and INSERT_SUBREG patterns
with COPY_TO_REGCLASS patterns which simply become COPY instructions.
The number of IMPLICIT_DEF instructions before register allocation is
reduced, and that is the cause of the test case changes.
llvm-svn: 160816
It is redundant; RegisterCoalescer will do the remat if it can't eliminate
the copy. Collected instruction counts before and after this. A few extra
instructions are generated due to spilling but it is normal to see these kinds
of changes with almost any small codegen change, according to Jakob.
This also fixed rdar://11830760 where xor is expected instead of movi0.
llvm-svn: 160749
The long branch pass (fixed in r160601) no longer uses the global base register
to compute addresses of branch destinations, so it is not necessary to reserve
a slot on the stack.
llvm-svn: 160703
struct s {
double x1;
float x2;
};
__attribute__((regparm(3))) struct s f(int a, int b, int c);
void g(void) {
f(41, 42, 43);
}
We need to be able to represent passing the address of s to f (sret) in a
register (inreg). Turns out that all that is needed is to not mark them as
mutually incompatible.
llvm-svn: 160695
are targeting an ELF platform. Only fold gs-relative (and fs-relative) loads
if it is actually sensible to do so for the target platform.
This fixes PR13438.
llvm-svn: 160687
This pass no longer requires that the global pointer value be saved to the
stack or register since it uses bal instruction to compute branch distance.
llvm-svn: 160601
LiveRangeEdit::foldAsLoad() can eliminate a register by folding a load
into its only use. Only do that when the load is safe to move, and it
won't extend any live ranges.
This fixes PR13414.
llvm-svn: 160575
PHIElimination splits critical edges when it predicts it can resolve
interference and eliminate copies. It doesn't split the edge if the
interference wouldn't be resolved anyway because the phi-use register is
live in the critical edge anyway.
Teach PHIElimination to split loop exiting edges with interference, even
if it wouldn't resolve the interference. This removes the necessary
copies from the loop, which is still an improvement from injecting the
copies into the loop.
The test case demonstrates the improvement. Before:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
movl %esi, %eax
je LBB0_1
After:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
je LBB0_1
movl %esi, %eax
llvm-svn: 160571
Updated OptimizeCompare in peephole to remove redundant cmp against zero.
We only remove Compare if CF and OF are not used.
rdar://11855129
llvm-svn: 160454
when run on an Intel Atom processor. The failures have arisen due
to changes elsewhere in the trunk over the past 8 weeks or so.
These failures were not detected by the Atom buildbot because the
CPU on the Atom buildbot was not being detected as an Atom CPU.
The fix for this problem is in Host.cpp and X86Subtarget.cpp, but
shall remain commented out until the current set of Atom test failures
are fixed.
Patch by Andy Zhang and Tyler Nowicki!
llvm-svn: 160451
LiveIntervals due to the two-addr pass generating bogus MI code.
The crux of the issue was a loop nesting problem. The intent of the code
which attempts to transform instructions before converting them to
two-addr form is to defer and reprocess any transformed instructions as
the second processing is likely to have more opportunities to coalesce
copies, etc. Unfortunately, there was one section of processing that was
not deferred -- the INSERT_SUBREG rewriting. Due to quirks of how this
rewriting proceeded, not only did it occur early, it removed the bits of
information needed for the deferred processing to correctly generate the
necessary two address form (specifically inserting a copy), but didn't
trigger any immediate assertions and produced what appeared to be
already valid two-address from code. Thus, the assertion only fired much
later in the pipeline.
The fix is to hoist the transformation logic up layer to where it can
more firmly defer all further processing, and to teach the normal
processing to handle an edge case previously handled as part of the
transformation logic. This edge case (already matched tied register
operands) needs to *not* defer any steps.
As has been brought up repeatedly in the process: wow does this code
need refactoring. I *may* squeeze in some time to at least bring sanity
to this loop... but wow... =]
Thanks to Jakob for helpful hints on the way here, and the review.
llvm-svn: 160443
Print the high order register of a double word register operand.
In 32 bit mode, a 64 bit double word integer will be represented
by 2 32 bit registers. This modifier causes the high order register
to be used in the asm expression. It is useful if you are using
doubles in assembler and continue to control register to variable
relationships.
This patch also fixes a related bug in a previous patch:
case 'D': // Second part of a double word register operand
case 'L': // Low order register of a double word register operand
case 'M': // High order register of a double word register operand
I got 'D' and 'M' confused. The second part of a double word operand
will only match 'M' for one of the endianesses. I had 'L' and 'D'
be the opposite twins when 'L' and 'M' are.
llvm-svn: 160429
intrinsics. The second instruction(s) to be handled are the vector versions
of count set bits (ctpop).
The changes here are to clang so that it generates a target independent
vector ctpop when it sees an ARM dependent vector bits set count. The changes
in llvm are to match the target independent vector ctpop and in
VMCore/AutoUpgrade.cpp to update any existing bc files containing ARM
dependent vector pop counts with target-independent ctpops. There are also
changes to an existing test case in llvm for ARM vector count instructions and
to a test for the bitcode upgrade.
<rdar://problem/11892519>
There is deliberately no test for the change to clang, as so far as I know, no
consensus has been reached regarding how to test neon instructions in clang;
q.v. <rdar://problem/8762292>
llvm-svn: 160410
Nadav Rotem