Add API to LTOCodeGenerator to specify a strategy for the -internalize
pass.
This is a new attempt at Bill's change in r185882, which he reverted in
r188029 due to problems with the gold linker. This puts the onus on the
linker to decide whether (and what) to internalize.
In particular, running internalize before outputting an object file may
change a 'weak' symbol into an internal one, even though that symbol
could be needed by an external object file --- e.g., with arclite.
This patch enables three strategies:
- LTO_INTERNALIZE_FULL: the default (and the old behaviour).
- LTO_INTERNALIZE_NONE: skip -internalize.
- LTO_INTERNALIZE_HIDDEN: only -internalize symbols with hidden
visibility.
LTO_INTERNALIZE_FULL should be used when linking an executable.
Outputting an object file (e.g., via ld -r) is more complicated, and
depends on whether hidden symbols should be internalized. E.g., for
ld -r, LTO_INTERNALIZE_NONE can be used when -keep_private_externs, and
LTO_INTERNALIZE_HIDDEN can be used otherwise. However,
LTO_INTERNALIZE_FULL is inappropriate, since the output object file will
eventually need to link with others.
lto_codegen_set_internalize_strategy() sets the strategy for subsequent
calls to lto_codegen_write_merged_modules() and lto_codegen_compile*().
<rdar://problem/14334895>
llvm-svn: 199191
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
llvm-svn: 199104
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
llvm-svn: 199082
This moves the old pass creation functionality to its own header and
updates the callers of that routine. Then it adds a new PM supporting
bitcode writer to the header file, and wires that up in the opt tool.
A test is added that round-trips code into bitcode and back out using
the new pass manager.
llvm-svn: 199078
that through the interface rather than a simple bool. This should allow
starting to wire up real output to round-trip IR through opt with the
new pass manager.
llvm-svn: 199071
This implements the legacy passes in terms of the new ones. It adds
basic testing using explicit runs of the passes. Next up will be wiring
the basic output mechanism of opt up when the new pass manager is
engaged unless bitcode writing is requested.
llvm-svn: 199049
Nothing was using the ability of the pass to delete the raw_ostream it
printed to, and nothing was trying to pass it a pointer to the
raw_ostream. Also, the function variant had a different order of
arguments from all of the others which was just really confusing. Now
the interface accepts a reference, doesn't offer to delete it, and uses
a consistent order. The implementation of the printing passes haven't
been updated with this simplification, this is just the API switch.
llvm-svn: 199044
name to match the source file which I got earlier. Update the include
sites. Also modernize the comments in the header to use the more
recommended doxygen style.
llvm-svn: 199041
nests to the opt commandline support. This also showcases the
implicit-initial-manager support which will be most useful for testing.
There are several bugs that I spotted by inspection here that I'll fix
with test cases in subsequent commits.
llvm-svn: 199038
mode that can be used to debug the execution of everything.
No support for analyses here, that will come later. This already helps
show parts of the opt commandline integration that isn't working. Tests
of that will start using it as the bugs are fixed.
llvm-svn: 199004
manager. I cannot emphasize enough that this is a WIP. =] I expect it
to change a great deal as things stabilize, but I think its really
important to get *some* functionality here so that the infrastructure
can be tested more traditionally from the commandline.
The current design is looking something like this:
./bin/opt -passes='module(pass_a,pass_b,function(pass_c,pass_d))'
So rather than custom-parsed flags, there is a single flag with a string
argument that is parsed into the pass pipeline structure. This makes it
really easy to have nice structural properties that are very explicit.
There is one obvious and important shortcut. You can start off the
pipeline with a pass, and the minimal context of pass managers will be
built around the entire specified pipeline. This makes the common case
for tests super easy:
./bin/opt -passes=instcombine,sroa,gvn
But this won't introduce any of the complexity of the fully inferred old
system -- we only ever do this for the *entire* argument, and we only
look at the first pass. If the other passes don't fit in the pass
manager selected it is a hard error.
The other interesting aspect here is that I'm not relying on any
registration facilities. Such facilities may be unavoidable for
supporting plugins, but I have alternative ideas for plugins that I'd
like to try first. My plan is essentially to build everything without
registration until we hit an absolute requirement.
Instead of registration of pass names, there will be a library dedicated
to parsing pass names and the pass pipeline strings described above.
Currently, this is directly embedded into opt for simplicity as it is
very early, but I plan to eventually pull this into a library that opt,
bugpoint, and even Clang can depend on. It should end up as a good home
for things like the existing PassManagerBuilder as well.
There are a bunch of FIXMEs in the code for the parts of this that are
just stubbed out to make the patch more incremental. A quick list of
what's coming up directly after this:
- Support for function passes and building the structured nesting.
- Support for printing the pass structure, and FileCheck tests of all of
this code.
- The .def-file based pass name parsing.
- IR priting passes and the corresponding tests.
Some obvious things that I'm not going to do right now, but am
definitely planning on as the pass manager work gets a bit further:
- Pull the parsing into library, including the builders.
- Thread the rest of the target stuff into the new pass manager.
- Wire support for the new pass manager up to llc.
- Plugin support.
Some things that I'd like to have, but are significantly lower on my
priority list. I'll get to these eventually, but they may also be places
where others want to contribute:
- Adding nice error reporting for broken pass pipeline descriptions.
- Typo-correction for pass names.
llvm-svn: 198998
root path to which object files managed by the LLIObjectCache instance should be
written. This option defaults to "", in which case objects are cached in the
same directory as the bitcode they are derived from.
The load-object-a.ll test has been rewritten to use this option to support
testing in environments where the test directory is not writable.
llvm-svn: 198852
Rename bytecode to opcodes to make it more clear. Change an impossible case to
llvm_unreachable instead. Avoid allocation of a buffer by modifying the
PrintOpcodes iteration.
llvm-svn: 198848
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
llvm-svn: 198836
With a current mingw (gcc 4.8.1) it looks like we hit some variation of
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40278
The end result is that off_t is not defined and the build fails without this
patch.
llvm-svn: 198749
I believe the bot failures on linux systems were due to overestimating the
alignment of object-files within archives, which are only guaranteed to be
two-byte aligned. I have reduced the alignment in
RuntimeDyldELF::createObjectImageFromFile accordingly.
llvm-svn: 198737
This adds some preliminary support for decoding ARM EHABI unwinding information.
The major functionality that remains from complete support is bytecode
translation.
Each Unwind Index Table is printed out as a separate entity along with its
section index, name, offset, and entries.
Each entry lists the function address, and if possible, the name, of the
function to which it corresponds. The encoding model, personality routine or
index, and byte code is also listed.
llvm-svn: 198734
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
llvm-svn: 198688
(unittests/ExecutionEngine/JIT/CMakeLists.txt is still missing for now, since
it handles export files in a strange way: It generates a .exports file from a
.def file instead of the other way round.)
llvm-svn: 198183
The cmake build didn't support EXPORTED_SYMBOL_FILE. Instead, it had a
Windows-only implementation in tools/lto/CMakeLists.txt, a linux-only
implementation in tools/gold/CMakeLists.txt, and a darwin-only implementation
in tools/clang/tools/libclang/CMakeLists.txt.
This attempts to consolidate these one-offs into a single place. Clients can now
just set LLVM_EXPORTED_SYMBOL_FILE and things (hopefully) Just Work, like in
the make build.
llvm-svn: 198136
This reduces the size of clang-format from 22 MB to 1.8 MB, diagtool goes from
21 MB to 2.8 MB, libclang.so goes from 29 MB to 20 MB, etc. The size of the
bin/ folder shrinks from 270 MB to 200 MB.
Targets that support plugins and don't already use EXPORTED_SYMBOL_FILE
(which libclang and libLTO already do) can set NO_DEAD_STRIP to opt out.
llvm-svn: 198087
Although --system-libs is expected to use after --libs, it can be used alone.
$ bin/llvm-config --ldflags
-L/path/to/llvm/objroot/lib
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
$ bin/llvm-config --system-libs
(Blank line. "all" is assumed but nothing is printed.)
-lrt -ldl -ltinfo -lpthread -lz
$ bin/llvm-config --ldflags --libs --system-libs object
-L/path/to/llvm/objroot/lib
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is reimplementation of r197380, and workaround for PR3347 and PR8449.
FIXME: Each LLVM component may have its dependent system libs.
llvm-svn: 197664
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
llvm-svn: 197633
With llvm-config.exe --bindir --libdir --build-mode, on Visual Studio 2010,
In build tree:
(OBJ_ROOT)/bin/MinSizeRel
(OBJ_ROOT)/lib/MinSizeRel
MinSizeRel
In installed tree:
(INSTALL_PREFIX)/bin
(INSTALL_PREFIX)/lib
MinSizeRel
This is enhancements since r196283.
llvm-svn: 197467
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
llvm-svn: 197432
FIXME: Host's llvm-config is not generated. It's for target's.
Host tools, aka "BuildTools", in utils, do not require llvm-config to build.
For example with --host=i686-pc-mingw32 --build=linux,
$ BuildTools/Release+Asserts/bin/llvm-config --libs support
-lLLVMSupport
-lpthread -lshell32 -lpsapi -limagehlp -lm
llvm-svn: 197382
LLVM libs are printed in the first line, and system libs are printed in the next line.
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is workaround for PR3347 and PR8449.
llvm-svn: 197380
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
llvm-svn: 197198
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
llvm-svn: 196856
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
llvm-svn: 196537
This splits the file-scope read() function into readGCNO() and
readGCDA(). Also broke file format read into functions that first read
the file type, then check the version.
llvm-svn: 196353
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.
Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.
llvm-svn: 196294
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
llvm-svn: 196184
only user was an ancient SCC printing bit of the opt tool which really
should be walking the call graph the same way the CGSCC pass manager
does.
llvm-svn: 195800
CallGraph.
This makes the CallGraph a totally generic analysis object that is the
container for the graph data structure and the primary interface for
querying and manipulating it. The pass logic is separated into its own
class. For compatibility reasons, the pass provides wrapper methods for
most of the methods on CallGraph -- they all just forward.
This will allow the new pass manager infrastructure to provide its own
analysis pass that constructs the same CallGraph object and makes it
available. The idea is that in the new pass manager, the analysis pass's
'run' method returns a concrete analysis 'result'. Here, that result is
a 'CallGraph'. The 'run' method will typically do only minimal work,
deferring much of the work into the implementation of the result object
in order to be lazy about computing things, but when (like DomTree)
there is *some* up-front computation, the analysis does it prior to
handing the result back to the querying pass.
I know some of this is fairly ugly. I'm happy to change it around if
folks can suggest a cleaner interim state, but there is going to be some
amount of unavoidable ugliness during the transition period. The good
thing is that this is very limited and will naturally go away when the
old pass infrastructure goes away. It won't hang around to bother us
later.
Next up is the initial new-PM-style call graph analysis. =]
llvm-svn: 195722
This patch places class definitions in implementation files into anonymous
namespaces to prevent weak vtables. This eliminates the need of providing an
out-of-line definition to pin the vtable explicitly to the file.
llvm-svn: 195092
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
Linux cannot open directories with open(2), although cygwin and *bsd can.
Motivation: The test, Object/directory.ll, had been failing with --target=cygwin on Linux. XFAIL was improper for host issues.
llvm-svn: 194257
There are two ways one could implement hiding of linkonce_odr symbols in LTO:
* LLVM tells the linker which symbols can be hidden if not used from native
files.
* The linker tells LLVM which symbols are not used from other object files,
but will be put in the dso symbol table if present.
GOLD's API is the second option. It was implemented almost 1:1 in llvm by
passing the list down to internalize.
LLVM already had partial support for the first option. It is also very similar
to how ld64 handles hiding these symbols when *not* doing LTO.
This patch then
* removes the APIs for the DSO list.
* marks LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN all linkonce_odr unnamed_addr
global values and other linkonce_odr whose address is not used.
* makes the gold plugin responsible for handling the API mismatch.
llvm-svn: 193800
- Mark tests as XFAIL:cygming in test/ExecutionEngine/MCJIT/remote.
Rather to suppress them, I'd like to leave them running as XFAIL.
- Revert r193472. RecordMemoryManager no longer resolves __main on cygming.
There are a couple of issues.
- X86 Codegen emits "call __main" in @main for targeting cygming.
It is useless in JIT. FYI, tests are passing when emitting __main is disabled.
- Current remote JIT does not resolve any symbols in child context.
FIXME: __main should be disabled, or remote JIT should resolve __main.
llvm-svn: 193498
Summary:
Currently shared library builds (BUILD_SHARED_LIBS=ON in cmake) fail three
bugpoint tests (BugPoint/remove_arguments_test.ll,
BugPoint/crash-narrowfunctiontest.ll, and BugPoint/metadata.ll).
If I run the bugpoint commands that llvm-lit runs with without -silence-passes
I see errors such as this:
opt: error while loading shared libraries: libLLVMSystemZInfo.so: failed to
map segment from shared object: Cannot allocate memory
It seems that the increased size of the binaries in a shared library build is
causing the subprocess to exceed the 100MB memory limit. This patch therefore
increases the default limit to a level at which these tests pass.
Reviewers: dsanders
Reviewed By: dsanders
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D2013
llvm-svn: 193420
This reverts commit r193255 and instead creates an lto_bool_t typedef
that points to bool, _Bool, or unsigned char depending on what is
available. Only recent versions of MSVC provide a stdbool.h header.
Reviewers: rafael.espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D2019
llvm-svn: 193377
This provides rudimentary testing of the llvm-c api.
The following commands are implemented:
* --module-dump
Read bytecode from stdin - print ir
* --module-list-functions
Read bytecode from stdin - list summary of functions
* --module-list-globals
Read bytecode from stdin - list summary of globals
* --targets-list
List available targets
* --object-list-sections
Read object file from stdin - list sections
* --object-list-symbols
Read object file from stdin - list symbols (like nm)
* --disassemble
Read lines of triple, hex ascii machine code from stdin - print disassembly
* --calc
Read lines of name, rpn from stdin - print generated module ir
Differential-Revision: http://llvm-reviews.chandlerc.com/D1776
llvm-svn: 193233
- Replaced tabs with proper padding
- print() takes two arguments, which are the GCNO and GCDA filenames
- Files are listed at the top of output, appended by line 0
- Stripped strings of trailing \0s
- Removed last two lines of whitespace in output
Patch by Yuchen Wu!
llvm-svn: 193148
collectLineCounts() should only organize the output data. This is done in
anticipation of subsequent changes which will pass in GCNO and GCDA filenames
into the print function where it is printed similar to the gcov output.
Patch by Yuchen Wu!
llvm-svn: 193134
This fixes a problem from a previous check-in where a return value was omitted.
Previously the remote/stubs-remote.ll and remote/stubs-sm-pic.ll tests were reporting passes, but they should have been failing. Those tests attempt to link against an external symbol and remote symbol resolution is not supported. The old RemoteMemoryManager implementation resulted in local symbols being used for resolution and the child process crashed but the test didn't notice. With this check-in remote symbol resolution fails, and so the test (correctly) fails.
llvm-svn: 192514
Generalize the API so we can distinguish symbols that are needed just for a DSO
symbol table from those that are used from some native .o.
The symbols that are only wanted for the dso symbol table can be dropped if
llvm can prove every other dso has a copy (linkonce_odr) and the address is not
important (unnamed_addr).
llvm-svn: 191922
At this time only Unix-based systems are supported. Windows has stubs and should re-route to the simulated mode.
Thanks to Sriram Murali for contributions to this patch.
llvm-svn: 191843
infrastructure.
This was essentially work toward PGO based on a design that had several
flaws, partially dating from a time when LLVM had a different
architecture, and with an effort to modernize it abandoned without being
completed. Since then, it has bitrotted for several years further. The
result is nearly unusable, and isn't helping any of the modern PGO
efforts. Instead, it is getting in the way, adding confusion about PGO
in LLVM and distracting everyone with maintenance on essentially dead
code. Removing it paves the way for modern efforts around PGO.
Among other effects, this removes the last of the runtime libraries from
LLVM. Those are being developed in the separate 'compiler-rt' project
now, with somewhat different licensing specifically more approriate for
runtimes.
llvm-svn: 191835
Enable building the LTO library (.lib and.dll) and llvm-lto.exe on Windows with
MSVC and Mingw as well as re-enabling the associated test.
Patch by Greg Bedwell!
llvm-svn: 191823
It's useful for the memory managers that are allocating a section to know what the name of the section is.
At a minimum, this is useful for low-level debugging - it's customary for JITs to be able to tell you what
memory they allocated, and as part of any such dump, they should be able to tell you some meta-data about
what each allocation is for. This allows clients that supply their own memory managers to do this.
Additionally, we also envision the SectionName being useful for passing meta-data from within LLVM to an LLVM
client.
This changes both the C and C++ APIs, and all of the clients of those APIs within LLVM. I'm assuming that
it's safe to change the C++ API because that API is allowed to change. I'm assuming that it's safe to change
the C API because we haven't shipped the API in a release yet (LLVM 3.3 doesn't include the MCJIT memory
management C API).
llvm-svn: 191804
Tests to follow.
PIC with small code model and EH frame handling will not work with multiple modules. There are also some rough edges to be smoothed out for remote target support.
llvm-svn: 191722
Enable building the LTO library (.lib and.dll) and llvm-lto.exe on Windows with
MSVC and Mingw as well as re-enabling the associated test.
Patch by Greg Bedwell!
llvm-svn: 191670
This is a patch to add capability to llvm-objdump to dump COFF Import Table
entries, so that we can write tests for LLD checking Import Table contents.
llvm-objdump did not print anything but just file name if the format is COFF
and -private-headers option is given. This is a patch adds capability for
dumping DLL Import Table, which is specific to the COFF format.
In this patch I defined a new iterator to iterate over import table entries.
Also added a few functions to COFFObjectFile.cpp to access fields of the entry.
Differential Revision: http://llvm-reviews.chandlerc.com/D1719
llvm-svn: 191472
Various Windows SDK headers use _MSC_VER values to figure out what
version of the VC++ headers they're using, in particular for SAL macros.
Patch by Paul Hampson!
llvm-svn: 191015
This puts all the global PassManager debugging flags, like
-print-after-all and -time-passes, behind a managed static. This
eliminates their static initializers and, more importantly, exit-time
destructors.
The only behavioral change I anticipate is that tools need to
initialize the PassManager before parsing the command line in order to
export these options, which makes sense. Tools that already initialize
the standard passes (opt/llc) don't need to do anything new.
llvm-svn: 190974
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
llvm-svn: 190598
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
We are now able to unique a simple class as demonstrated by the added
testing case.
llvm-svn: 190334
The work on this project was left in an unfinished and inconsistent state.
Hopefully someone will eventually get a chance to implement this feature, but
in the meantime, it is better to put things back the way the were. I have
left support in the bitcode reader to handle the case-range bitcode format,
so that we do not lose bitcode compatibility with the llvm 3.3 release.
This reverts the following commits: 155464, 156374, 156377, 156613, 156704,
156757, 156804 156808, 156985, 157046, 157112, 157183, 157315, 157384, 157575,
157576, 157586, 157612, 157810, 157814, 157815, 157880, 157881, 157882, 157884,
157887, 157901, 158979, 157987, 157989, 158986, 158997, 159076, 159101, 159100,
159200, 159201, 159207, 159527, 159532, 159540, 159583, 159618, 159658, 159659,
159660, 159661, 159703, 159704, 160076, 167356, 172025, 186736
llvm-svn: 190328
We used to generate the compact unwind encoding from the machine
instructions. However, this had the problem that if the user used `-save-temps'
or compiled their hand-written `.s' file (with CFI directives), we wouldn't
generate the compact unwind encoding.
Move the algorithm that generates the compact unwind encoding into the
MCAsmBackend. This way we can generate the encoding whether the code is from a
`.ll' or `.s' file.
<rdar://problem/13623355>
llvm-svn: 190290
The previous msbuild integration only worked if VS2010 was installed. This patch
renames the current integration to LLVM-vs2010 and adds LLVM-vs2012.
Differential Revision: http://llvm-reviews.chandlerc.com/D1614
llvm-svn: 190173
Iterator of std::vector may be implemented as a raw pointer. In
this case ADL does not find the find() function in the std namespace.
For example, this is the case with STDCXX implementation of vector.
Patch by Konstantin Tokarev.
llvm-svn: 189733
When unrolling is disabled in the pass manager, the loop vectorizer should also
not unroll loops. This will allow the -fno-unroll-loops option in Clang to
behave as expected (even for vectorizable loops). The loop vectorizer's
-force-vector-unroll option will (continue to) override the pass-manager
setting (including -force-vector-unroll=0 to force use of the internal
auto-selection logic).
In order to test this, I added a flag to opt (-disable-loop-unrolling) to force
disable unrolling through opt (the analog of -fno-unroll-loops in Clang). Also,
this fixes a small bug in opt where the loop vectorizer was enabled only after
the pass manager populated the queue of passes (the global_alias.ll test needed
a slight update to the RUN line as a result of this fix).
llvm-svn: 189499
This is just enough to get "llvm-ranlib foo.a" working and tested. Making
llvm-ranlib a symbolic link to llvm-ar doesn't work so well with llvm's option
parsing, but ar's option parsing is mostly custom anyway.
This patch also removes the -X32_64 option. Looks like it was just added in
r10297 as part of implementing the current command line parsing. I can add it
back (with a test) if someone really has AIX portability problems without it.
llvm-svn: 189489
This adds the msbuild integration files to the install, provides batch scripts
for (un)installing it in a convenient way, and hooks up the nsis installer to
run those scripts.
Differential Revision: http://llvm-reviews.chandlerc.com/D1537
llvm-svn: 189434
This allows setting-up the LLVM_EXTERNAL_* CMake variables that some people are using,
e.g. to set the source directory of the project in a different place.
llvm-svn: 189415
These files are intended to live in the msbuild toolset directory, which
is somewhere like:
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\
v4.0\Platforms\Win32\PlatformToolsets\llvm
More work is needed to install them as part of the NSIS installer.
Patch by Warren Hunt!
llvm-svn: 189411
----
Add new API lto_codegen_compile_parallel().
This API is proposed by Nick Kledzik. The semantic is:
--------------------------------------------------------------------------
Generate code for merged module into an array of native object files. On
success returns a pointer to an array of NativeObjectFile. The count
parameter returns the number of elements in the array. Each element is
a pointer/length for a generated mach-o/ELF buffer. The buffer is owned
by the lto_code_gen_t and will be freed when lto_codegen_dispose() is called,
or lto_codegen_compile() is called again. On failure, returns NULL
(check lto_get_error_message() for details).
extern const struct NativeObjectFile*
lto_codegen_compile_parallel(lto_code_gen_t cg, size_t *count);
---------------------------------------------------------------------------
This API is currently only called on OSX platform. Linux or other Unixes
using GNU gold are not supposed to call this function, because on these systems,
object files are fed back to linker via disk file instead of memory buffer.
In this commit, lto_codegen_compile_parallel() simply calls
lto_codegen_compile() to return a single object file. In the near future,
this function is the entry point for compilation with partition. Linker can
blindly call this function even if partition is turned off; in this case,
compiler will return only one object file.
llvm-svn: 189386
This API is proposed by Nick Kledzik. The semantic is:
--------------------------------------------------------------------------
Generate code for merged module into an array of native object files. On
success returns a pointer to an array of NativeObjectFile. The count
parameter returns the number of elements in the array. Each element is
a pointer/length for a generated mach-o/ELF buffer. The buffer is owned
by the lto_code_gen_t and will be freed when lto_codegen_dispose() is called,
or lto_codegen_compile() is called again. On failure, returns NULL
(check lto_get_error_message() for details).
extern const struct NativeObjectFile*
lto_codegen_compile_parallel(lto_code_gen_t cg, size_t *count);
---------------------------------------------------------------------------
This API is currently only called on OSX platform. Linux or other Unixes
using GNU gold are not supposed to call this function, because on these systems,
object files are fed back to linker via disk file instead of memory buffer.
In this commit, lto_codegen_compile_parallel() simply calls
lto_codegen_compile() to return a single object file. In the near future,
this function is the entry point for compilation with partition. Linker can
blindly call this function even if partition is turned off; in this case,
compiler will return only one object file.
llvm-svn: 189297
It was previously not being built on Windows because the cmake file relied
on a sed script to generate a .in file that llvm-config needs.
By using cmake's configure_file function, we can get rid off the sed hack,
and also have this work on Windows.
Differential Revision: http://llvm-reviews.chandlerc.com/D1481
llvm-svn: 189125
Allow CMake to pick up external projects in llvm/tools without the need to modify the "llvm/tools/CMakeLists.txt" file.
This makes it easier to work with projects that live in other repositories, without needing to specify each one in "llvm/tools/CMakeLists.txt".
llvm-svn: 188921
Like yaml ObjectFiles, this will be very useful for testing the MC CFG
implementation (mostly MCObjectDisassembler), by matching the output
with YAML, and for potential users of the MC CFG, by using it as an input.
There isn't much to the actual format, it is just a serialization of the
MCModule class. Of note:
- Basic block references (pred/succ, ..) are represented by the BB's
start address.
- Just as in the MC CFG, instructions are MCInsts with a size.
- Operands have a prefix representing the type (only register and
immediate supported here).
- Instruction opcodes are represented by their names; enum values aren't
stable, enum names mostly are: usually, a change to a name would need
lots of changes in the backend anyway.
Same with registers.
All in all, an example is better than 1000 words, here goes:
A simple binary:
Disassembly of section __TEXT,__text:
_main:
100000f9c: 48 8b 46 08 movq 8(%rsi), %rax
100000fa0: 0f be 00 movsbl (%rax), %eax
100000fa3: 3b 04 25 48 00 00 00 cmpl 72, %eax
100000faa: 0f 8c 07 00 00 00 jl 7 <.Lend>
100000fb0: 2b 04 25 48 00 00 00 subl 72, %eax
.Lend:
100000fb7: c3 ret
And the (pretty verbose) generated YAML:
---
Atoms:
- StartAddress: 0x0000000100000F9C
Size: 20
Type: Text
Content:
- Inst: MOV64rm
Size: 4
Ops: [ RRAX, RRSI, I1, R, I8, R ]
- Inst: MOVSX32rm8
Size: 3
Ops: [ REAX, RRAX, I1, R, I0, R ]
- Inst: CMP32rm
Size: 7
Ops: [ REAX, R, I1, R, I72, R ]
- Inst: JL_4
Size: 6
Ops: [ I7 ]
- StartAddress: 0x0000000100000FB0
Size: 7
Type: Text
Content:
- Inst: SUB32rm
Size: 7
Ops: [ REAX, REAX, R, I1, R, I72, R ]
- StartAddress: 0x0000000100000FB7
Size: 1
Type: Text
Content:
- Inst: RET
Size: 1
Ops: [ ]
Functions:
- Name: __text
BasicBlocks:
- Address: 0x0000000100000F9C
Preds: [ ]
Succs: [ 0x0000000100000FB7, 0x0000000100000FB0 ]
<snip>
...
llvm-svn: 188890
In order to appease people (in Apple) who accuse me for committing "huge change" (?) without proper review.
Thank Eric for fixing a compile-warning.
llvm-svn: 188204
1. Add some helper classes for partitions. They are designed in a
way such that the top-level LTO driver will not see much difference
with or without partitioning.
2. Introduce work-dir. Now all intermediate files generated during
LTO phases will be saved under work-dir. User can specify the workdir
via -lto-workdir=/path/to/dir. By default the work-dir will be
erased before linker exit. To keep the workdir, do -lto-keep, or -lto-keep=1.
TODO: Erase the workdir, if the linker exit prematurely.
We are currently not able to remove directory on signal. The support
routines simply ignore directory.
3. Add one new API lto_codegen_get_files_need_remove().
Linker and LTO plugin will communicate via this API about which files
(including directories) need to removed before linker exit.
llvm-svn: 188188
Currently, when an invalid attribute is encountered on processing a .s file,
clang will abort due to llvm_unreachable. Invalid user input should not cause
an abnormal termination of the compiler. Change the interface to return a
boolean to indicate the failure as a first step towards improving hanlding of
malformed user input to clang.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 188047
* ELFTypes.h contains template magic for defining types based on endianess, size, and alignment.
* ELFFile.h defines the ELFFile class which provides low level ELF specific access.
* ELFObjectFile.h contains ELFObjectFile which uses ELFFile to implement the ObjectFile interface.
llvm-svn: 188022
The ExtractLoops function tries to reduce the failing test case by extracting
one or more loops from the misoptimized piece of the program. In doing this,
ExtractLoops must keep the MiscompiledFunctions vector up-to-date by ensuring
that the pointers refer to functions in the current failing program.
Unfortunately, this is not trivial because:
- ExtractLoops is iterative, and there are several early exits (and the
MiscompiledFunctions vector must be consistent with the current program at
every non-fatal exit point).
- Several of the utility functions used by ExtractLoops (such as
TestOptimizer, some of which are called through the TestFn callback
parameter, and Linker::LinkModules) delete their inputs upon success.
This change adds several updates of the MiscompiledFunctions vector at
different points. The first is after the initial call to TestMergedProgram
which checks that the loop-extracted program still works. The second is after
the call to TestFn (TestOptimizer, for example). This function will delete its
inputs (which is why the existing ExtractLoops logic cloned the inputs first).
llvm-svn: 187674
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
llvm-svn: 187618
If no other operation is specified, 's' becomes an operation instead of an
modifier. The s operation just creates a symbol table. It is the same as
running ranlib.
We assume the archive was created by a sane ar (like llvm-ar or gnu ar) and
if the symbol table is present, then it is current. We use that to optimize
the most common case: a broken build system that thinks it has to run ranlib.
llvm-svn: 187353
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
llvm-svn: 187278
There's no need to specify a flag to omit frame pointer elimination on non-leaf
nodes...(Honestly, I can't parse that option out.) Use the function attribute
stuff instead.
llvm-svn: 187093
The main observation is that we never need both the filesize and the map size.
When mapping a slice of a file, it doesn't make sense to request a null
terminator and that would be the only case where the filesize would be used.
There are other cleanups that should be done in this area:
* A client should not have to pass the size (even an explicit -1) to say if
it wants a null terminator or not, so we should probably swap the argument
order.
* The default should be to not require a null terminator. Very few clients
require this, but many end up asking for it just because it is the default.
llvm-svn: 186984
The gold plugin was passing the desired map size as the file size. This was
working for two reasons:
* Recent version of gold provide the get_view callback, so this code was not
used.
* In older versions, getOpenFile was called, but the file size is never used
if we don't require null terminated buffers and map size defaults to the
file size.
Thanks to Eli Bendersky for noticing this.
I will try to make this api a bit less error prone.
llvm-svn: 186978
The symbol table has forward references in the file. Instead of allocating
a temporary buffer or counting the size and then writing, this implementation
writes a dummy value first and patches it once the final value is known.
There is room for performance improvement. I will implement them as soon as I
get some other features (like a ranlib mode) in.
llvm-svn: 186934
Use the function attributes to pass along the stack protector buffer size.
Now that we have robust function attributes, don't use a command line option to
specify the stack protecto buffer size.
llvm-svn: 186863
There already have two "dead" functions, initialize{IPO|IPA}, defined for
similar purpose. I decide not to call these two functions for two reasons:
o. they don't cover all LTO passes (which will soon be separated into IPO
and post-IPO passes)
o. We have not yet figured out the right passes and the ordering for IPO
and post-IPO stages, meaning this change is only for the time being.
Since LTO passes are registered, we are now able to print IR before and
after particular point.
For OSX users:
--------------
"...-Wl,-mllvm -Wl,-print-after=<pass-name>" will print IR after the
specified pass.
For Other UNIX with GNU gold linker:
------------------------------------
"-Wl,-plugin-opt=-print-after=<pass-name>" should work.
(NOTE: no need for "-Wl,-mllvm")
Strip "-Wl," if flags are fed directly to linker instead of clang/clang++.
llvm-svn: 186853
This matches gnu archive behavior and since archive member order can change
which member is used, not changing the order on replacement looks like the
right thing to do.
This patch also refactors the logic for which archive member to keep and
whether to move it to a helper function (computeInsertAction). The
nesting in computeNewArchiveMembers was getting a bit confusing.
llvm-svn: 186829
The original change was rolled back in r186627 because of test
failures on the big endian machine. I believe I fixed the issue
so re-submitting.
llvm-svn: 186734
This allows "llvm-mc -disassemble" to accept two new features:
+ Using comma as a byte separator
+ Grouping bytes with '[' and ']' pairs.
The behaviour outside a [...] group is unchanged. But within the group once
llvm-mc encounters a true error, it stops rather than trying to resynchronise
the stream at the next byte. This is more useful for disassembly tests, where
we have an almost-instruction in mind and don't care what the misaligned
interpretation would be. Particularly if it means llvm-mc won't actually see
the next intended almost-instruction.
As a side effect, this means llvm-mc can disassemble its own -show-encoding
output if copy-pasted.
llvm-svn: 186661
Summary:
Dump optional data directory entries in the PE/COFF header, so that
we can test the output of LLD linker. This patch updates the test binary
file, but the source of the binary is the same. I just re-linked the file.
I don't know how the previous file was linked, but the previous file did
not have any data directory entries for some reason.
Reviewers: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1148
llvm-svn: 186623
NAKAMURA Takumi