So far we separated constant factors from multiplications, however,
only when they are at the outermost level of a parameter SCEV. Now,
we also separate constant factors from the parameter SCEV if the
outermost expression is a SCEVAddRecExpr. With the changes to the
SCEVAffinator we can now improve the extractConstantFactor(...)
function at will without worrying about any other code part. Thus,
if needed we can implement a more comprehensive
extractConstantFactor(...) function that will traverse the SCEV
instead of looking only at the outermost level.
Four test cases were affected. One did not change much and the other
three were simplified.
llvm-svn: 260859
If an llvm.assume dominates the SCoP entry block and the assumed condition
can be expressed as an affine inequality we will now add it to the context.
Differential Revision: http://reviews.llvm.org/D14413
llvm-svn: 252851
This patch allows invariant loads to be used in the SCoP description,
e.g., as loop bounds, conditions or in memory access functions.
First we collect "required invariant loads" during SCoP detection that
would otherwise make an expression we care about non-affine. To this
end a new level of abstraction was introduced before
SCEVValidator::isAffineExpr() namely ScopDetection::isAffine() and
ScopDetection::onlyValidRequiredInvariantLoads(). Here we can decide
if we want a load inside the region to be optimistically assumed
invariant or not. If we do, it will be marked as required and in the
SCoP generation we bail if it is actually not invariant. If we don't
it will be a non-affine expression as before. At the moment we
optimistically assume all "hoistable" (namely non-loop-carried) loads
to be invariant. This causes us to expand some SCoPs and dismiss them
later but it also allows us to detect a lot we would dismiss directly
if we would ask e.g., AliasAnalysis::canBasicBlockModify(). We also
allow potential aliases between optimistically assumed invariant loads
and other pointers as our runtime alias checks are sound in case the
loads are actually invariant. Together with the invariant checks this
combination allows to handle a lot more than LICM can.
The code generation of the invariant loads had to be extended as we
can now have dependences between parameters and invariant (hoisted)
loads as well as the other way around, e.g.,
test/Isl/CodeGen/invariant_load_parameters_cyclic_dependence.ll
First, it is important to note that we cannot have real cycles but
only dependences from a hoisted load to a parameter and from another
parameter to that hoisted load (and so on). To handle such cases we
materialize llvm::Values for parameters that are referred by a hoisted
load on demand and then materialize the remaining parameters. Second,
there are new kinds of dependences between hoisted loads caused by the
constraints on their execution. If a hoisted load is conditionally
executed it might depend on the value of another hoisted load. To deal
with such situations we sort them already in the ScopInfo such that
they can be generated in the order they are listed in the
Scop::InvariantAccesses list (see compareInvariantAccesses). The
dependences between hoisted loads caused by indirect accesses are
handled the same way as before.
llvm-svn: 249607
The support for modulo expressions is not comlete and makes the new
domain generation harder. As the currently broken domain generation
needs to be replaced, we will first swap in the new, fixed domain
generation and make it compatible with the modulo expressions later.
llvm-svn: 247278
The support for pointer expressions is broken as it can only handle
some patterns in the IslExprBuilder. We should to treat pointers in
expressions the same as integers at some point and revert this patch.
llvm-svn: 247147
Remainder operations with constant divisor can be modeled as quasi-affine
expression. This patch adds support for detecting and modeling them. We also
add a test that ensures they are correctly code generated.
This patch was extracted from a larger patch contributed by Johannes Doerfert
in http://reviews.llvm.org/D5293
llvm-svn: 240518
Upcoming revisions of isl require us to include header files explicitly, which
have previously been already transitively included. Before we add them, we sort
the existing includes.
Thanks to Chandler for sort_includes.py. A simple, but very convenient script.
llvm-svn: 236930
In the lnt benchmark MultiSource/Benchmarks/MallocBench/gs/gs with
scalar and PHI modeling we detected the multidimensional accesses
with sizes variant in the SCoP. This will check the sizes for validity.
llvm-svn: 236395
As soon as one operand of the product is invalid, the entire product is invalid.
This happens for example if one of the operands is not loop-invariant.
This fixes http://llvm.org/PR23125
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com
llvm-svn: 234119
This will strip the constant factor of a parameter befor we add it to
the SCoP. As a result the access functions are simplified, e.g., for
the attached test case.
llvm-svn: 233501
This backend supports besides the classical code generation the upcoming SCEV
based code generation (which the existing CLooG backend does not support
robustly).
OpenMP code generation in the isl backend benefits from our run-time alias
checks such that the set of loops that can possibly be parallelized is a lot
larger.
The code was tested on LNT. We do not regress on builds without -polly-parallel.
When using -polly-parallel most tests work flawlessly, but a few issues still
remain and will be addressed in follow up commits.
SCEV/non-SCEV codegen:
- Compile time failure in ldecod and TimberWolfMC due a problem in our
run-time alias check generation triggered by pointers that escape through
the OpenMP subfunction (OpenMP specific).
- Several execution time failures. Due to the larger set of loops that we now
parallelize (compared to the classical code generation), we currently run
into some timeouts in tests with a lot loops that have a low trip count and
are slowed down by parallelizing them.
SCEV only:
- One existing failure in lencod due to llvm.org/PR21204 (not OpenMP specific)
OpenMP code generation is the last feature that was only available in the CLooG
backend. With the isl backend being the only one supporting features such as
run-time alias checks and delinearization, we will soon switch to use the isl
ast generator by the default and subsequently remove our dependency on CLooG.
http://reviews.llvm.org/D5517
llvm-svn: 222088
By adding braces into the DEBUG statement we can make clang-format format code
such as:
DEBUG(stmt1(); stmt2())
as multi-line code:
DEBUG({
stmt1();
stmt2();
});
This makes control-flow in debug statements easier to read.
llvm-svn: 220441
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
definition below all of the header #include lines, Polly edition.
If you want to know more details about this, you can see the recent
commits to Debug.h in LLVM. This is just the Polly segment of a cleanup
I'm doing globally for this macro.
llvm-svn: 206852
SCoP invariant parameters with the different start value would deter parameter
sharing. For example, when compiling the following C code:
void foo(float *input) {
for (long j = 0; j < 8; j++) {
// SCoP begin
for (long i = 0; i < 8; i++) {
float x = input[j * 64 + i + 1];
input[j * 64 + i] = x * x;
}
}
}
Polly would creat two parameters for these memory accesses:
p_0: {0,+,256}
p_2: {4,+,256}
[j * 64 + i + 1] => MemRef_input[o0] : 4o0 = p_1 + 4i0
[j * 64 + i] => MemRef_input[o0] : 4o0 = p_0 + 4i0
These parameters only differ from start value. To enable parameter sharing,
we split the start value from SCEVAddRecExpr, so they would share a single
parameter that always has zero start value:
p0: {0,+,256}<%for.cond1.preheader>
[j * 64 + i + 1] => MemRef_input[o0] : 4o0 = 4 + p_1 + 4i0
[j * 64 + i] => MemRef_input[o0] : 4o0 = p_0 + 4i0
Such translation can make the polly-dependence much faster.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 187728
We do not only need to understand that 'k * p' is a parameter expression, but
also need to store this expression in the set of parameters. Before this patch
we wrongly stored the two individual parameters %k and %p.
Reported by: Sebastian Pop <spop@codeaurora.org>
llvm-svn: 179485
After this commit, polly is clang-format clean. This can be tested with
'ninja polly-check-format'. Updates to clang-format may change this, but the
differences will hopefully be both small and general improvements to the
formatting.
We currently have some not very nice formatting for a couple of items, DEBUG()
stmts for example. I believe the benefit of being clang-format clean outweights
the not perfect layout of this code.
llvm-svn: 177796
When doing SCEV based code generation, we ignore instructions calculating values
that are fully defined by a SCEV expression. The values that are calculated by
this instructions are recalculated on demand.
This commit improves the check to verify if certain instructions can be ignored
and recalculated on demand.
llvm-svn: 177313
We currently do not support pointer types in affine expressions. Hence, we
disallow in the SCoP detection. Later we may decide to add support for them.
This fixes PR12277
Reported-By: Sebastian Pop <sebpop@gmail.com>
llvm-svn: 152928
This also fixes UMax where we did not correctly keep track of the parameters.
Fixes PR12275.
Reported-By: Sebastian Pop <sebpop@gmail.com>
llvm-svn: 152913
address is part of the access function. Also remove unused special cases that
were necessery when the base address was still contained in the access function
llvm-svn: 144280
Instead of using TempScop to find parameters, we detect them directly
on the SCEV. This allows us to remove the TempScop parameter detection
in a subsequent commit.
This fixes a bug reported by Marcello Maggioni <hayarms@gmail.com>
llvm-svn: 144087
Michael Kruse