Commit Graph

232 Commits

Author SHA1 Message Date
Matt Arsenault 0aa0d70067 MIR: Use Register 2020-04-08 22:07:26 -04:00
Guillaume Chatelet b9810988b2 [Alignment][NFC] Transitionning more getMachineMemOperand call sites
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790

Reviewers: courbet

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D77127
2020-03-31 11:04:10 +00:00
Reid Kleckner 5ff5ddd0ad [Win64] Insert int3 into trailing empty BBs
Otherwise, the Win64 unwinder considers direct branches to such empty
trailing BBs to be a branch out of the function. It treats such a branch
as a tail call, which can only be part of an epilogue. If the unwinder
misclassifies such a branch as part of the epilogue, it will fail to
unwind the stack further. This can lead to bad stack traces, or failure
to handle exceptions properly. This is described in
https://llvm.org/PR45064#c4, and by the comment at the top of the
X86AvoidTrailingCallPass.cpp file.

It should be safe to insert int3 for such blocks. An empty trailing BB
that reaches this pass is pretty much guaranteed to be unreachable.  If
a program executed such a block, it would fall off the end of the
function.

Most of the complexity in this patch comes from threading through the
"EHFuncletEntry" boolean on the MIRParser and registering the pass so we
can stop and start codegen around it. I used an MIR test because we
should teach LLVM to optimize away these branches as a follow-up.

Reviewed By: hans

Differential Revision: https://reviews.llvm.org/D76531
2020-03-23 08:50:37 -07:00
Sriraman Tallam df082ac45a Basic Block Sections support in LLVM.
This is the second patch in a series of patches to enable basic block
sections support.

This patch adds support for:

* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.

Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
2020-03-16 16:06:54 -07:00
Stanislav Mekhanoshin 1bacdcf48d Extend LaneBitmask to 64 bit
This is needed for D74873, AMDGPU going to have 16 bit subregs
and the largest tuple is 32 VGPRs, which results in 64 lanes.

Differential Revision: https://reviews.llvm.org/D75378
2020-03-02 12:10:52 -08:00
Benjamin Kramer adcd026838 Make llvm::StringRef to std::string conversions explicit.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.

This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.

This doesn't actually modify StringRef yet, I'll do that in a follow-up.
2020-01-28 23:25:25 +01:00
Benjamin Kramer df186507e1 Make helper functions static or move them into anonymous namespaces. NFC. 2020-01-14 14:06:37 +01:00
Simon Pilgrim 31aed2e0da Fix "MIParser::getIRValue(unsigned int)’ defined but not used" warning. NFCI. 2020-01-14 11:58:54 +00:00
Eli Friedman e68e4cbcc5 [GlobalISel] Change representation of shuffle masks in MachineOperand.
We're planning to remove the shufflemask operand from ShuffleVectorInst
(D72467); fix GlobalISel so it doesn't depend on that Constant.

The change to prelegalizercombiner-shuffle-vector.mir happens because
the input contains a literal "-1" in the mask (so the parser/verifier
weren't really handling it properly). We now treat it as equivalent to
"undef" in all contexts.

Differential Revision: https://reviews.llvm.org/D72663
2020-01-13 16:55:41 -08:00
Ulrich Weigand f0fd11df7d [FPEnv] Invert sense of MIFlag::FPExcept flag
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.

However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.

This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)

Reviewed By: craig.topper

Differential Revision: https://reviews.llvm.org/D72466
2020-01-10 15:34:50 +01:00
Peng Guo cfd8498401 [MIR] Fix cyclic dependency of MIR formatter
Summary:
Move MIR formatter pointer from TargetMachine to TargetInstrInfo to
avoid cyclic dependency between target & codegen.

Reviewers: dsanders, bkramer, arsenm

Subscribers: wdng, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D72485
2020-01-10 11:18:12 +01:00
Daniel Sanders de3d0ee023 Revert "Revert "[MIR] Target specific MIR formating and parsing""
There was an unguarded dereference of MF in a function that permitted
nullptr. Fixed

This reverts commit 71d64f72f9.
2020-01-08 20:03:29 -08:00
Nico Weber 71d64f72f9 Revert "[MIR] Target specific MIR formating and parsing"
This reverts commit 3ef05d85be.
It broke check-llvm on many bots, see comments on D69836.
2020-01-08 22:50:49 -05:00
Peng Guo 3ef05d85be [MIR] Target specific MIR formating and parsing
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.

* Target specific immediate mnemonic need to start with "." follows by
  identifier string. When MIR parser sees immediate it will call target
  specific parsing function.

* Custom pseudo source value need to start with custom follows by
  double-quoted string. MIR parser will pass the quoted string to target
  specific PSV parsing function.

* MIRFormatter have 2 helper functions to facilitate LLVM value printing
  and parsing for custom PSV if they refers LLVM values.

Patch by Peng Guo

Reviewers: dsanders, arsenm

Reviewed By: dsanders

Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69836
2020-01-08 18:48:02 -08:00
Daniel Sanders 5ab6fa7b70 Revert "[MIR] Target specific MIR formating and parsing"
Forgot to credit Peng in the commit message.

This reverts commit be841f89d0.
2020-01-08 18:48:02 -08:00
Peng Guo be841f89d0 [MIR] Target specific MIR formating and parsing
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.

* Target specific immediate mnemonic need to start with "." follows by
  identifier string. When MIR parser sees immediate it will call target
  specific parsing function.

* Custom pseudo source value need to start with custom follows by
  double-quoted string. MIR parser will pass the quoted string to target
  specific PSV parsing function.

* MIRFormatter have 2 helper functions to facilitate LLVM value printing
  and parsing for custom PSV if they refers LLVM values.

Reviewers: dsanders, arsenm

Reviewed By: dsanders

Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69836
2020-01-08 18:34:21 -08:00
Amy Huang a078c77d72 [MIR] Add MIR parsing for heap alloc site instruction markers
Summary:
This patch adds MIR parsing and printing for heap alloc markers, which were
added in D69136. They are printed as an operand similar to pre-/post-instr
symbols, with a heap-alloc-marker token and a metadata node.

Reviewers: rnk

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D69864
2019-11-05 12:57:45 -08:00
Petar Avramovic 95290827d7 [MIParser] Set RegClassOrRegBank during instruction parsing
MachineRegisterInfo::createGenericVirtualRegister sets
RegClassOrRegBank to static_cast<RegisterBank *>(nullptr).
MIParser on the other hand doesn't. When we attempt to constrain
Register Class on such VReg, additional COPY is generated.
This way we avoid COPY instructions showing in test that have MIR
input while they are not present with llvm-ir input that was used
to create given MIR for a -run-pass test.

Differential Revision: https://reviews.llvm.org/D68946

llvm-svn: 375502
2019-10-22 14:25:37 +00:00
Guillaume Chatelet 18f805a7ea [Alignment][NFC] Remove unneeded llvm:: scoping on Align types
llvm-svn: 373081
2019-09-27 12:54:21 +00:00
Guillaume Chatelet d4c4671aa7 [Alignment][NFC] Remove LogAlignment functions
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790

Reviewers: courbet

Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, MaskRay, atanasyan, jsji, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D67620

llvm-svn: 372231
2019-09-18 15:49:49 +00:00
Guillaume Chatelet aff45e4b23 [LLVM][Alignment] Make functions using log of alignment explicit
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:

 - `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
 - `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
 - `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,

Reviewers: lattner, thegameg, courbet

Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D65945

llvm-svn: 371045
2019-09-05 10:00:22 +00:00
Matt Arsenault 5af9cf042f GlobalISel: Change representation of shuffle masks
Currently shufflemasks get emitted as any other constant, and you end
up with a bunch of virtual registers of G_CONSTANT with a
G_BUILD_VECTOR. The AArch64 selector then asserts on anything that
doesn't fit this pattern. This isn't an ideal representation, and
should avoid legalization and have fewer opportunities for a
representational error.

Rather than invent a new shuffle mask operand type, similar to what
ShuffleVectorSDNode does, just track the original IR Constant mask
operand. I don't completely like the idea of adding another link to
the IR, but MIR is already quite dependent on IR constants already,
and this will allow sharing the shuffle mask utility functions with
the IR.

llvm-svn: 368704
2019-08-13 15:34:38 +00:00
Daniel Sanders 2bea69bf65 Finish moving TargetRegisterInfo::isVirtualRegister() and friends to llvm::Register as started by r367614. NFC
llvm-svn: 367633
2019-08-01 23:27:28 +00:00
Ulrich Weigand 6c5d5ce551 Allow target to handle STRICT floating-point nodes
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).

This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.

To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:

- A new MCID flag "mayRaiseFPException" that the target should set on any
  instruction that possibly can raise FP exception according to the
  architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
  instruction resulting from expansion of any constrained FP intrinsic.

Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).

Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.

The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.

This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.

Reviewed By: andrew.w.kaylor

Differential Revision: https://reviews.llvm.org/D55506

llvm-svn: 362663
2019-06-05 22:33:10 +00:00
Markus Lavin 92d5db524e Make sub-registers index names case sensitive in the MIRParser
Prior to this change sub-register index names are assumed to be lower
case (but they are printed with original casing). This means that if a
target has some upper case characters in its sub-register names then
mir-export directly followed by mir-import is not possible. This also
means that sub-register indices currently are (and will continue to be)
slightly inconsistent with register names which are printed and assumed
to be lower case.

As the current textual representation of mir has a few inconsistencies
in this area it is a bit arbitrary how to address the matter. This
change is towards the direction that we feel is most correct (i.e. case
sensitivity).

Differential Revision: https://reviews.llvm.org/D61499

llvm-svn: 360318
2019-05-09 08:29:04 +00:00
Markus Lavin a475da36eb [DebugInfo] DW_OP_deref_size in PrologEpilogInserter.
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.

The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).

This re-commit fixes issues reported in the first one. Namely deref was
inserted under wrong conditions and additionally the deref_size argument
was incorrectly encoded.

Differential Revision: https://reviews.llvm.org/D59687

llvm-svn: 359535
2019-04-30 07:58:57 +00:00
Hans Wennborg 4e6b857922 Revert r358268 "[DebugInfo] DW_OP_deref_size in PrologEpilogInserter."
It causes clang to crash while building Chromium. See https://crbug.com/952230
for reproducer.

> The PrologEpilogInserter need to insert a DW_OP_deref_size before
> prepending a memory location expression to an already implicit
> expression to avoid having the existing expression act on the memory
> address instead of the value behind it.
>
> The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
> big-endian targets need to read the right size as simply truncating a
> larger read would yield the wrong result (LSB bytes are not at the lower
> address).
>
> Differential Revision: https://reviews.llvm.org/D59687

llvm-svn: 358281
2019-04-12 12:54:52 +00:00
Markus Lavin 138c76129b [DebugInfo] DW_OP_deref_size in PrologEpilogInserter.
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.

The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).

Differential Revision: https://reviews.llvm.org/D59687

llvm-svn: 358268
2019-04-12 08:23:55 +00:00
Matt Arsenault bc6d07ca46 MIR: Allow targets to serialize MachineFunctionInfo
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.

Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.

llvm-svn: 356215
2019-03-14 22:54:43 +00:00
Matt Arsenault bdfb6cfdf1 MIR: Stop reinitializing target information for every use
Every time a physical register reference was parsed, this would
initialize a string map for every register in in target, and discard
it for the next. The same applies for the other fields initialized
from target information.

Follow along with how the function state is tracked, and add a new
tracking class for target information.

The string->register class/register bank for some reason were kept
separately, so track them in the same place.

llvm-svn: 355970
2019-03-12 20:42:12 +00:00
Matt Arsenault 8a59b1919c MIR: Validate LLT types when parsing
llvm-svn: 353107
2019-02-04 22:59:56 +00:00
Matt Arsenault 547a83b4eb MIR: Reject non-power-of-4 alignments in MMO parsing
llvm-svn: 352686
2019-01-30 23:09:28 +00:00
Chandler Carruth 2946cd7010 Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636
2019-01-19 08:50:56 +00:00
Luke Cheeseman f57d7d8237 [AArch64] - Return address signing dwarf support
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
  do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
  string printing later on

Differential Revision: https://reviews.llvm.org/D55774

llvm-svn: 349472
2018-12-18 10:37:42 +00:00
Daniel Sanders b51480ff3e [mir] Fix uninitialized variable in r349035 noticed by clang-atom-d525-fedora-rel and 3 other bots
llvm-svn: 349043
2018-12-13 15:05:27 +00:00
Daniel Sanders 9f3cf55e63 [mir] Serialize DILocation inline when not possible to use a metadata reference
Summary:
Sometimes MIR-level passes create DILocations that were not present in the
LLVM-IR. For example, it may merge two DILocations together to produce a
DILocation that points to line 0.

Previously, the address of these DILocations were printed which prevented the
MIR from being read back into LLVM. With this patch, DILocations will use
metadata references where possible and fall back on serializing them inline like so:
    MOV32mr %stack.0.x.addr, 1, _, 0, _, %0, debug-location !DILocation(line: 1, scope: !15)

Reviewers: aprantl, vsk, arphaman

Reviewed By: aprantl

Subscribers: probinson, llvm-commits

Tags: #debug-info

Differential Revision: https://reviews.llvm.org/D55243

llvm-svn: 349035
2018-12-13 14:25:27 +00:00
Luke Cheeseman 6db3a6a4a7 Revert r347490 as it breaks address sanitizer builds
llvm-svn: 347499
2018-11-23 17:13:06 +00:00
Luke Cheeseman d6dbd64104 Revert r343341
- Cannot reproduce the build failure locally and the build logs have
  been deleted.

llvm-svn: 347490
2018-11-23 11:01:47 +00:00
Matthias Braun a83403892a MachineOperand/MIParser: Do not print debug-use flag, infer it
The debug-use flag must be set exactly for uses on DBG_VALUEs.  This is
so obvious that it can be trivially inferred while parsing. This will
reduce noise when printing while omitting an information that has little
value to the user.

The parser will keep recognizing the flag for compatibility with old
`.mir` files.

Differential Revision: https://reviews.llvm.org/D53903

llvm-svn: 345671
2018-10-30 23:28:27 +00:00
Matthias Braun 7159daa68e MIRParser: Check that instructions only reference DILocation metadata
llvm-svn: 343505
2018-10-01 17:50:52 +00:00
Luke Cheeseman 10981cc884 Revert r343317
- asan buildbots are breaking and I need to investigate the issue

llvm-svn: 343341
2018-09-28 17:01:50 +00:00
Luke Cheeseman 21f2955bb2 Reapply changes reverted by r343235
- Add fix so that all code paths that create DWARFContext
  with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method

llvm-svn: 343317
2018-09-28 13:37:27 +00:00
Luke Cheeseman 8e5676b1aa Revert r343192 as an ubsan build is currently failing
llvm-svn: 343235
2018-09-27 16:47:30 +00:00
Luke Cheeseman f6844b307a Reapply changes reverted in r343114, lldb patch to follow shortly
llvm-svn: 343192
2018-09-27 10:39:20 +00:00
Luke Cheeseman 77aaa22081 Revert r343112 as CallFrameString API change has broken lldb builds
llvm-svn: 343114
2018-09-26 14:48:03 +00:00
Luke Cheeseman 03ad8812f5 [AArch64] - Return address signing dwarf support
- Reapply r343089 with a fix for DebugInfo/Sparc/gnu-window-save.ll

llvm-svn: 343112
2018-09-26 14:30:29 +00:00
Hans Wennborg 00b88bbcaf Revert r343089 "[AArch64] - Return address signing dwarf support"
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.

> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
>   state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
>   i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
>   (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
>   https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136

llvm-svn: 343103
2018-09-26 12:57:45 +00:00
Luke Cheeseman f755e687fc [AArch64] - Return address signing dwarf support
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
  state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
  i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
  (0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
  https://patchwork.ozlabs.org/patch/800271/

Differential Revision: https://reviews.llvm.org/D50136

llvm-svn: 343089
2018-09-26 10:14:15 +00:00
Michael Berg c72a7259be add IR flags to MI
Summary: Initial support for nsw, nuw and exact flags in MI

Reviewers: spatel, hfinkel, wristow

Reviewed By: spatel

Subscribers: nlopes

Differential Revision: https://reviews.llvm.org/D51738

llvm-svn: 341996
2018-09-11 21:35:32 +00:00
Krzysztof Parzyszek cc3f630252 Consistently use MemoryLocation::UnknownSize to indicate unknown access size
1. Change the software pipeliner to use unknown size instead of dropping
   memory operands. It used to do it before, but MachineInstr::mayAlias
   did not handle it correctly.
2. Recognize UnknownSize in MachineInstr::mayAlias.
3. Print and parse UnknownSize in MIR.

Differential Revision: https://reviews.llvm.org/D50339

llvm-svn: 340208
2018-08-20 20:37:57 +00:00