Summary: The preprocessing and code generation and optimization stages of the compiler are also passed the "-fopenmp-is-device" flag. This is used to trigger machine specific preprocessing and code generation when performing device offloading to an NVIDIA GPU via OpenMP directives.
Reviewers: arpith-jacob, caomhin, carlo.bertolli, Hahnfeld, hfinkel, tstellar
Reviewed By: Hahnfeld
Subscribers: Hahnfeld, rengolin
Differential Revision: https://reviews.llvm.org/D29645
llvm-svn: 306691
Summary: Device offloading requires the specification of an additional flag containing the triple of the //other// architecture the code is being compiled on if such an architecture exists. If compiling for the host, the auxiliary triple flag will contain the triple describing the device and vice versa.
Reviewers: arpith-jacob, sfantao, caomhin, carlo.bertolli, ABataev, Hahnfeld, jlebar, hfinkel, tstellar
Reviewed By: Hahnfeld
Subscribers: rengolin, cfe-commits
Differential Revision: https://reviews.llvm.org/D29339
llvm-svn: 306689
Relanding after restricting equalBaseIndex to not erroneuosly consider
a FrameIndices stemming from alloca from being comparable as its
offset is set post-selectionDAG.
Pull FrameIndex comparision reasoning from DAGCombiner::isAlias to
general BaseIndexOffset.
llvm-svn: 306688
For networking-type bpf program, it often needs to access
packet data. A context data structure is provided to the bpf
programs with two fields:
u32 data;
u32 data_end;
User can access these two fields with ctx->data and ctx->data_end.
During program verification process, the kernel verifier modifies
the bpf program with loading of actual pointer value from kernel
data structure.
r = ctx->data ===> r = actual data start ptr
r = ctx->data_end ===> r = actual data end ptr
A typical program accessing ctx->data like
char *data_ptr = (char *)(long)ctx->data
will result in a 32-bit load followed by a zero extension.
Such an operation is combined into a single LDW in DAG combiner
as bpf LDW does zero extension automatically.
In cases like the below (which can be a result of global value numbering
and partial redundancy elimination before insn selection):
B1:
u32 a = load-32-bit &ctx->data
u64 pa = zext a
...
B2:
u32 b = load-32-bit &ctx->data
u64 pb = zext b
...
B3:
u32 m = PHI(a, b)
u64 pm = zext m
In B3, "pm = zext m" cannot be removed, which although is legal
from compiler perspective, will generate incorrect code after
kernel verification.
This patch recognizes this pattern and traces through PHI node
to see whether the operand of "zext m" is defined with LDWs or not.
If it is, the "zext m" itself can be removed.
The patch also recognizes the pattern where the load and use of
the load value not in the same basic block, where truncate operation
may be removed as well.
The patch handles 1-byte, 2-byte and 4-byte truncation.
Two test cases are added to verify the transformation happens properly
for the above code pattern.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 306685
All android builds systems have switched to -mstackrealign for building
x86 binaries, so follow their cue with our mini build system.
This presently breaks just one test (TestReturnValue), and this is due
to a compiler bug, which has already been fixed in clang, but it hasn't
made it yet into the official NDK compiler. While I'm touching that
test, I also remove an android-specific XFAIL, which is not relevant
anymore.
llvm-svn: 306683
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
The original intent of test/Transforms/InstCombine/memset.ll was to test for lowering of llvm.memset into stores when the size of the memset is 1, 2, 4, or 8. Sometime between then and now the test has stopped testing for that, but remained passing due to testing for the absence of llvm.memset calls rather than the presence of store instructions. Right now this test ends up with an empty function body because the alloca is eliminated as safe-to-remove, which results in the llvm.memset calls's being eliminated due to their pointer args being undef; so it is not testing for conversion of llvm.memset into store instructions at all.
This change alters the test to verify that store instructions are created, and moves the target of the memset to an arg of the proc to avoid it being eliminated as unused.
Reviewers: anna, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34642
llvm-svn: 306681
Summary:
Rather than testing for expected results, test/Transforms/InstCombine/memmove.ll is testing for the absence of calls to llvm.memmove.
In the case of test3, the test has stopped testing for materialization of loads/stores, but remained passing due to testing for the absence of llvm.memset calls rather than the presence of load/store instructions. Right now this test ends up with an empty function body because the alloca is eliminated as safe-to-remove, which results in the llvm.memmove calls being eliminated due to a pointer arg being undef; so it is not testing for conversion of llvm.memmove into load/store instructions at all.
Reviewers: eli.friedman, anna, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34645
llvm-svn: 306679
This patch fixes a verification error with -verify-machineinstrs while expanding __tls_get_addr by not creating ADJCALLSTACKUP and ADJCALLSTACKDOWN if there is another ADJCALLSTACKUP in this basic block since nesting ADJCALLSTACKUP/ADJCALLSTACKDOWN is not allowed.
Here, ADJCALLSTACKUP and ADJCALLSTACKDOWN are created as a fence for instruction scheduling to avoid _tls_get_addr is scheduled before mflr in the prologue (https://bugs.llvm.org//show_bug.cgi?id=25839). So if another ADJCALLSTACKUP exists before _tls_get_addr, we do not need to create a new ADJCALLSTACKUP.
Differential Revision: https://reviews.llvm.org/D34347
llvm-svn: 306678
Because of mistake introduced in r306517,
wrong variable ("name" instead of "Name") was used
in error message.
As a result it reported section name instead of
relocation name.
This file still needs cleanup to match LLVM coding style
and more tests I think.
llvm-svn: 306677
The changes are a result of discussion of https://reviews.llvm.org/D33685.
It solves the following problem:
1. We can inform getGEPCost about simplified indices to help it with
calculating the cost. But getGEPCost does not take into account the
context which GEPs are used in.
2. We have getUserCost which can take the context into account but we cannot
inform about simplified indices.
With the changes getUserCost will have access to additional information
as getGEPCost has.
The one parameter getUserCost is also provided.
Differential Revision: https://reviews.llvm.org/D34057
llvm-svn: 306674
Summary:
This patch makes the `{` in `msg_field{field: OK}` in a proto option scope be
treated as an assignment operator. Previosly the added test case was formatted
as:
```
option (MyProto.options) = {
field_a: OK
field_b{field_c: OK} field_d: OKOKOK field_e: OK
}
```
Reviewers: djasper
Reviewed By: djasper
Subscribers: klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D34749
llvm-svn: 306672
The difference from the previous version is the use of decltype, as the
implementation of std::result_of in libc++ did not work correctly for
variadic function like open(2).
Original summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 306671
Summary:
Fetching an input file required about five lines of code, and this was
repeated in multiple unit tests, with slight variations. Add a helper
function for doing that into the lldbUtilityMocks module (which I rename
to lldbUtilityHelpers to commemorate the fact it includes more than
mocks)
Reviewers: zturner, eugene
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34683
llvm-svn: 306668
ScopStmts were being used in the computation of the Domain of the SCoPs
in ScopInfo. Once statements are split, there will not be a 1-to-1
correspondence between Stmts and Basic blocks. Thus this patch avoids
the use of getStmtFor() by creating a map of BB to InvalidDomain and
using it to compute the domain of the statements.
Contributed-by: Nanidini Singhal <cs15mtech01004@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D33942
llvm-svn: 306667
Summary:
The instruction pattern:
and $-16, %esp
sub $imm, %esp
...
lea imm(%ebp), %esp
appears when the compiler is realigning the stack (for example in
main(), or almost everywhere with -mstackrealign switch). The "and"
instruction is very difficult to model, but that's not necessary, as
these frames are always %ebp-based (the compiler also needs a way to
restore the original %esp). Therefore the plans we were generating for
these function were almost correct already. The only place we were doing
it wrong were the last instructions of the epilogue (usually just
"ret"), where we had to revert to %esp-based unwinding, as the %ebp had
been popped already.
This was wrong because our "distance of esp from cfa" counter had picked
up the "sub" instruction (and incremented the counter) but it had not
seen that the register was reset by the "lea" instruction.
This patch fixes that shortcoming, and adds a test for handling
functions like this.
I have not been able to tickle the compiler into producing a 64-bit
function with this pattern, but I don't see a reason why it couldn't
produce it, if it chose to, so I add a x86_64 test as well.
Reviewers: jasonmolenda, tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34750
llvm-svn: 306666
Summary:
Support vector type G_MERGE_VALUES selection. For now G_MERGE_VALUES marked as legal for any type, so nothing to do in legalizer.
Split from https://reviews.llvm.org/D33665
Reviewers: qcolombet, t.p.northover, zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33958
llvm-svn: 306665
arguments when `-fsyntax-only` is used
Previously, Clang failed to create a fixed compilation database when the
compilation arguments use -fsyntax-only instead of -c. This commit fixes the
issue by forcing Clang to look at the compilation job when stripping the
positional arguments.
Differential Revision: https://reviews.llvm.org/D34687
llvm-svn: 306659
Summary:
TBB and THH allow using a Thumb GPR or the PC as destination operand.
A few machine verifier failures where due to those instructions not
expecting PC as destination operand.
Add -verify-machineinstrs to test/CodeGen/ARM/jump-table-tbh.ll to add
test coverage even if expensive checks are disabled.
Reviewers: MatzeB, t.p.northover, jmolloy
Reviewed By: MatzeB
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34610
llvm-svn: 306654
Summary:
does it make sense to enable K&R function declaration style for OpenCL?
clang throws following error message for the declaration w/o arguments:
```
int my_func();
error: function with no prototype cannot use the spir_function calling convention
```
Current way to fix this issue is to specify that parameter list is empty by using 'void':
```
int my_func(void);
```
Let me know what do you think about this patch.
Reviewers: Anastasia, yaxunl
Reviewed By: Anastasia
Subscribers: cfe-commits, echuraev
Differential Revision: https://reviews.llvm.org/D33681
llvm-svn: 306653
Summary:
A follow-up on D34449:
* add `-std=c++11` to `.hpp` file by default.
* add constexpr function to test and doc.
Reviewers: alexfh
Reviewed By: alexfh
Subscribers: JDevlieghere, xazax.hun, cfe-commits
Differential Revision: https://reviews.llvm.org/D34771
llvm-svn: 306650
Summary:
The NVPTX backend is now initialised within Polly. A language front-end need not be modified to initialise the backend, just for Polly.
Reviewers: Meinersbur, grosser
Reviewed By: Meinersbur
Subscribers: vchuravy, mgorny
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31859
llvm-svn: 306649
The first user of this API will be the cross translation unit
functionality of the Static Analyzer which will be committed in a
follow-up patch.
Differential Revision: https://reviews.llvm.org/D34506
llvm-svn: 306648
(Take 2: this patch re-applies r306625, which was reverted in r306629. This
patch includes only trivial fixes.)
In Python2 and Python3, the various (non-)?Unicode string types are sort of
spaghetti. Python2 has unicode support tacked on via the 'unicode' type, which
is distinct from 'str' (which are bytes). Python3 takes the "unicode-everywhere"
approach, with 'str' representing a Unicode string.
Both have a 'bytes' type. In Python3, it is the only way to represent raw bytes.
However, in Python2, 'bytes' is an alias for 'str'. This leads to interesting
problems when an interface requires a precise type, but has to run under both
Python2 and Python3.
The previous logic appeared to be correct in all cases, but went through more
layers of indirection than necessary. This change does the necessary conversions
in one shot, with documentation about which paths might be taken in Python2 or
Python3.
Changes from r306625: some tests just print binary outputs, so in those cases,
fall back to str() in Python3. For googletests, add one missing call to
to_string().
(Tested by verifying the visible breakage with Python3. Verified that everything
works in py2 and py3.)
llvm-svn: 306643
some methods in the ABI need a Process to do their work.
Instead of passing it in as a one-off argument to those
methods, this patch puts it in the base class and the methods
can retrieve if it needed.
Note that ABI's are sometimes built without a Process
(e.g. SBTarget::GetStackRedZoneSize) so it's entirely
possible that the process weak pointer will not be
able to reconsistitue into a strong pointer.
<rdar://problem/32526754>
llvm-svn: 306633
Vassil Vassilev